Biomass-Derived Carbon Dots and Their Sensing Applications

Solid-State Fluorescent Carbon Dots with Hydrophobic Modification Induced Red Emission for White Light-Emitting Diodes

Herein, we developed red solid-state fluorescent carbon dots (SSF-CDs) through a one-step solvothermal method, utilizing acetone as the carbonization solvent. Optical and structural characterization revealed that the sp2 domains in the core of the R-CDs were consistently interrupted and that the oxygen-containing groups on the surface were replaced by alkyl groups. This substitution mitigates excessive π-π interactions, thereby preventing quenching of fluorescence in the solid state. Adjusting the molar ratio of citric acid (CA) and urea yielded solid fluorescent carbon dots (CDs) with panchromatic luminescence, indicating enhanced π-π interactions and more pronounced red shifts in the emission peaks. Furthermore, we found that this strategy is applicable to other carbon sources, including phenylenediamine, salicylic acid, and lignin. This research presents an innovative strategy for the fabrication of solid-state luminescent CDs.

Aggregation induced emission "Turn on" ultra-low detection of anti-inflammatory drug flufenamic acid in human urine samples by carbon dots derived from bamboo stem waste

Carbon dot-based fluorescence sensors have attracted research interest for the selective determination of anti-inflammatory drugs in biological fluids and environments. The overdose and accumulation of anti-inflammatory drugs in tissues can cause chronic side effects including abdominal pain, and renal damage. Herein, we report a new fluorescent probe, bamboo stem waste-derived carbon dots (BS-CDs) for highly sensitive detection of Flufenamic acid (FA), a hazardous anti-inflammatory drug. The UV-vis absorption spectra of BS-CDs show a redshifted absorption peak at 283 nm upon the addition of FA suggesting strong binding interaction between BS-CDs and FA molecule. The BS-CDs showed a fluorescence enhancement (∼2-fold) detection for FA (400 μM) in the linear concentration range (0.40 → 0.65 μM) with a limit of detection (LoD; 17 nM) and binding constant (Ka = 1.33 × 10-3 M-1). The time-resolved fluorescence decay analysis showed that the average lifetime of BS-CDs has slightly changed (4.42 → 4.67 ns) by the interaction with FA through the aggregation-induced emission (AIE) process. The interference, pH, and effect of time results suggest that BS-CDs are highly selective probes for FA detection and do not show any interference involvement during FA detection. The confirmation of the structure and morphology changes of BS-CDs after interaction with FA was carried out by XRD, FESEM, HRTEM, FTIR, and Raman spectroscopy. The practicability of the BS-CDs probe was proved by the detection of FA in human urine samples with recovery of 103-109 %. This suggests that the proposed BS-CDs-based 'turn-on' sensor could be used to determine the FA in biological fluids.

Construction of fluorescent sensor array with nitrogen-doped carbon dots for sensing Sudan Orange G and identification of various azo compounds

In this study, nitrogen-doped carbon dots (N-CDs) were facilely fabricated by one-pot hydrothermal method with levulinic acid and triethanolamine. A fluorescent sensor array was established for identifying azo compounds including Sudan Orange G (SOG), p-diaminoazobenzene, p-aminoazobenzene, azobenzene and quantitative detection of SOG. Experimental results revealed that azo compounds could quench the fluorescent intensity of N-CDs. Owing to various azo compounds showing different affinities to N-CDs, the sensor array exhibited different fluorescence quenching changes, which were further analyzed with principal component analysis to discriminate azo compounds. The sensor array was able to differentiate and recognize diverse concentrations of azo compounds from 0.25 to 2 mg/L. Simultaneously, a variety of factors affecting the detection of SOG were optimized. Under the optimized conditions, the sensor showed excellent stability and sensitivity. The sensor possessed marvelous linearity in the range of 0.1-1 mg/L and 1-4 mg/L and the detection limit was 27.82 μg/L. Spiked recoveries of 90.8-98.2 % were attained at spiked levels of 0.2 mg/L and 1 mg/L, demonstrating that the constructed fluorescence sensor was dependable and feasible for sensing SOG in environmental water samples.

Fast and eco-friendly synthesis of carbon dots from pinecone for highly effective detection of 2,4,6-trinitrophenol in environmental samples

2,4,6-Trinitrophenol (TNP) has high explosive risks and biological toxicity, and there has been considerable concern over the determination of TNP. In the present work, fluorescent carbon dots (CDs) stemmed from a green carbon source of pinecone by the facile hydrothermal approach. A novel environment- friendly fluorescent probe was developed to efficiently detect TNP by using the obtained CDs with remarkable fluorescence stability. The fluorescent CDs exhibited obvious excitation dependence with the highest peaks for excitation and emission occurring at 321 and 411 nm, respectively. The fluorescence intensity is significantly reduced by TNP owing to the inner filter effect with the CDs. The probe exhibited good linearity with TNP concentrations in the range of 0.025-20 μg mL-1, and the limit of detection was as low as 8.5 ng mL-1. Additionally, the probe proved successful in sensing TNP quantitatively in actual environmental samples with satisfied recoveries of 95.6-99.6%. The developed fluorescent probe offered an environment-friendly, efficient, rapid, and reliable platform for detecting trace TNP in the environmental field.HighlightsNovel carbon dots were synthesised from green precursors of pineal powder.The highly effective quenching process was put down to the inner filter effect.The as-constructed fluorescent probe was successfully utilised for sensing 2,4,6-trinitrophenol in environmental samples.The proposed method was simple, rapid, efficient, economical, and eco-friendly.

Biomass-derived carbon dots as emerging visual platforms for fluorescent sensing

Biomass-derived carbon dots (CDs) are non-toxic and fluorescently stable, making them suitable for extensive application in fluorescence sensing. The use of cheap and renewable materials not only improves the utilization rate of waste resources, but it is also drawing increasing attention to and interest in the production of biomass-derived CDs. Visual fluorescence detection based on CDs is the focus of current research. This method offers high sensitivity and accuracy and can be used for rapid and accurate determination under complex conditions. This paper describes the biomass precursors of CDs, including plants, animal remains and microorganisms. The factors affecting the use of CDs as fluorescent probes are also discussed, and a brief overview of enhancements made to the preparation process of CDs is provided. In addition, the application prospects and challenges related to biomass-derived CDs are demonstrated.

Natural biomass carbon Dots-Based fluorescence sensor for high precision detection of vitamin B12 in serum

Vitamin B12(Vit B12) is an essential micronutrient for body growth, and abnormal levels of Vit B12 in the human body are closely associated with the prediction of certain diseases. Hence, a rapid, sensitive, and environment-friendly approach for Vit B12 detection was set up. Herein, the Bird's nest carbon dots (B-CDs) are synthesized by using a bird's nest and distilled water as precursors. One-step hydrothermal synthesis has created B-CDs without toxic ingredients or surface chemical modifications. The prepared B-CDs exhibited outstanding characteristics including excellent water solubility, brilliant fluorescence performance great biocompatibility, and fine stability in a broad pH range of 3.0-11.0 and high ionic strength solution. The experiment revealed that the fluorescence of the reaction system showed a regular decrease after the interaction of B-CDs with Vit B12. Additionally, there was an excellent linear relationship between the F/F0 of B-CDs and the concentration of Vit B12. The linear range was 0 ∼ 100 µM, R2 was 0.9929, and the detection limit was 0.24 µM. Finally, the proposed method successfully detected Vit B12 in human serum samples with recoveries of 96.2 %-100.3 %, showing broad clinical prospects.

Biomass derived green carbon dots for sensing applications of effective detection of metallic contaminants in the environment

The rapid consumption of metals and unorganized disposal have led to unprecedented increases in heavy metal ion concentrations in the ecosystem, which disrupts environmental homeostasis and results in agricultural biodiversity loss. Mitigation and remediation plans for heavy metal pollution are largely dependent on the discovery of cost-effective, biocompatible, specific, and robust detectors because conventional methods involve sophisticated electronics and sample preparation procedures. Carbon dots (CDs) have gained significant importance in sensing applications related to environmental sustainability. Fluorescence sensor applications have been enhanced by their distinctive spectral properties and the potential for developing efficient photonic devices. With the recent development of biomass-functionalized carbon dots, a wide spectrum of multivalent and bivalent transition metal ions responsible for water quality degradation can be detected with high efficiency and minimal toxicity. This review explores the various methods of manufacturing carbon dots and the biochemical mechanisms involved in metal detection using green carbon dots for sensing applications involving Cu (II), Fe (III), Hg (II), and Cr (VI) ions in aqueous systems. A detailed discussion of practical challenges and future recommendations is presented to identify feasible design routes.

An overview on animal/human biomass-derived carbon dots for optical sensing and bioimaging applications

Over the past decade, carbon dots (CDs) have emerged as some of the extremely popular carbon nanostructures for diverse applications. The advantages of sustainable CDs, characterized by their exceptional photoluminescence (PL), high water solubility/dispersibility, non-toxicity, and biocompatibility, substantiate their potential for a wide range of applications in sensing and biology. Moreover, nature offers plant- and animal-derived precursors for the sustainable synthesis of CDs and their doped variants. These sources are not only readily accessible, inexpensive, and renewable but are also environmentally benign green biomass. This review article presents in detail the production of sustainable CDs from various animal and human biomass through bottom-up synthetic methods, including hydrothermal, microwave, microwave-hydrothermal, and pyrolysis methods. The resulting CDs exhibit a uniform size distribution, possibility of heteroatom doping, surface passivation, and remarkable excitation wavelength-dependent/independent emission and up-conversion PL characteristics. Consequently, these CDs have been successfully utilized in multiple applications, such as bioimaging and the detection of various analytes, including heavy metal ions. Finally, a comprehensive assessment is presented, highlighting the prospects and challenges associated with animal/human biomass-derived CDs for multifaceted applications.

Green one-step synthesis of mushroom-derived carbon dots as fluorescent sensors for Fe3+ detection

Blue photoluminescent carbon dots were synthesized from Lentinus polychrous Lèv. via a simple hydrothermal process without additional chemical reagents or functionalization. The carbon dots (hereafter referred to as LCDs) were quasi-spherical with an average diameter of 6.0 nm. The strong fluorescence emissions of LCDs were utilized as the basis of efficient turn-off probes for Fe3+. The quenching phenomenon could be used to rapidly determine Fe3+ concentrations in the range of 0.0-2.0 mM in aqueous solution, with a limit of detection (LOD) of 16 μM. In the presence of interference, LCDs demonstrated good sensitivity and selectivity towards Fe3+ in both solution-based and paper-based systems. The LCDs also exhibited excellent photostability and an eco-friendly nature, making them an ideal choice for environmental monitoring with significant potential for diagnostic applications.

Biomass-Derived Carbon-Based Electrodes for Electrochemical Sensing: A Review

The diverse composition of biomass waste, with its varied chemical compounds of origin, holds substantial potential in developing low-cost carbon-based materials for electrochemical sensing applications across a wide range of compounds, including pharmaceuticals, dyes, and heavy metals. This review highlights the latest developments and explores the potential of these sustainable electrodes in electrochemical sensing. Using biomass sources, these electrodes offer a renewable and cost-effective route to fabricate carbon-based sensors. The carbonization process yields highly porous materials with large surface areas, providing a wide variety of functional groups and abundant active sites for analyte adsorption, thereby enhancing sensor sensitivity. The review classifies, summarizes, and analyses different treatments and synthesis of biomass-derived carbon materials from different sources, such as herbaceous, wood, animal and human wastes, and aquatic and industrial waste, used for the construction of electrochemical sensors over the last five years. Moreover, this review highlights various aspects including the source, synthesis parameters, strategies for improving their sensing activity, morphology, structure, and functional group contributions. Overall, this comprehensive review sheds light on the immense potential of biomass-derived carbon-based electrodes, encouraging further research to optimize their properties and advance their integration into practical electrochemical sensing devices.

A Green Synthesis Route to Derive Carbon Quantum Dots for Bioimaging Cancer Cells

Carbon quantum dots (CQDs) are known for their biocompatibility and versatile applications in the biomedical sector. These CQDs retain high solubility, robust chemical inertness, facile modification, and good resistance to photobleaching, which makes them ideal for cell bioimaging. Many fabrication processes produce CQDs, but most require expensive equipment, toxic chemicals, and a long processing time. This study developed a facile and rapid toasting method to prepare CQDs using various slices of bread as precursors without any additional chemicals. This fast and cost-effective toasting method could produce CQDs within 2 h, compared with the 10 h process in the commonly used hydrothermal method. The CQDs derived from the toasting method could be used to bioimage two types of colon cancer cells, namely, CT-26 and HT-29, derived from mice and humans, respectively. Significantly, these CQDs from the rapid toasting method produced equally bright images as CQDs derived from the hydrothermal method.