Enhanced Photocatalytic Degradation Activity Using the V2O5/RGO Composite

Illuminating the Power of V2O5 Nanoparticles: Efficient Photocatalytic Degradation of Organic Dyes under Visible Light

This research explores the synthesis, characterization, and application of Vanadium Pentoxide nanoparticles (V2O5 NPs), focusing on their efficacy in the photocatalytic degradation of organic dyes under visible light. Utilizing a co-precipitation method, we synthesized V2O5 NPs characterized by an orthorhombic crystal structure with a consistent average particle size of 28 nm. The optical properties of V2O5 NPs, including their band gap, were thoroughly investigated to understand their light absorption capabilities, which are crucial for photocatalytic activity. In our study, Methyl Violet (MV) dye was employed as a model organic pollutant to assess the photocatalytic performance of the nanoparticles. Under visible light irradiation, the V2O5 nanoparticles demonstrated an exceptional photocatalytic degradation efficiency, achieving up to 85% degradation of the MV dye within 100 min. This high level of efficiency is attributed to the nanoparticles' ability to effectively absorb visible light and generate electron-hole pairs, thereby facilitating a robust degradation process. Further analysis revealed that the photocatalytic activity led to the generation of reactive oxygen species (ROS) such as superoxide and hydroxyl radicals, which are integral to the dye degradation mechanism. These ROS play a critical role in breaking down the dye molecules, significantly contributing to the overall effectiveness of the photocatalytic process. The results of this study highlight the potential of V2O5 nanoparticles as a sustainable and effective photocatalytic material for environmental remediation applications, particularly in the treatment of wastewater containing organic dyes. This research not only advances our understanding of the photocatalytic properties of V2O5 nanoparticles but also demonstrates their practical application in addressing environmental pollution through innovative and efficient degradation of hazardous substances.

Novel bilayer 2D V2O5 as a potential catalyst for fast photodegradation of organic dyes

Two-dimensional (2D) materials have recently drawn interest in various applications due to their superior electronic properties, high specific surface area, and surface activity. However, studies on the catalytic properties of the 2D counterpart of V2O5 are scarce. In the present study, the catalytic properties of 2D V2O5 vis-à-vis bulk V2O5 for the degradation of methylene blue dye are discussed for the first time. The 2D V2O5 catalyst was synthesized using a modified chemical exfoliation technique. A massive increase in the electrochemically active surface area of 2D V2O5 by one order of magnitude greater than that of bulk V2O5 was observed in this study. Simultaneously, ~ 7 times increase in the optical absorption coefficient of 2D V2O5 significantly increases the number of photogenerated electrons involved in the catalytic performance. In addition, the surface activity of the 2D V2O5 catalyst is enhanced by generating surface oxygen vacancy defects. In the current study, we have achieved ~ 99% degradation of 16 ppm dye using the 2D V2O5 nanosheet catalysts under UV light exposure with a remarkable degradation rate constant of 2.31 min-1, which is an increase of the order of 102 from previous studies using V2O5 nanostructures and nanocomposites as catalysts. Since the enhanced photocatalytic activity emerged from the surface and optical properties of the catalyst, the current study shows great promise for the future application of 2D V2O5 in photo- and electrocatalysis.

Exploring the twin potential of nanostructured TiO2:SeO2 as a promising visible light photocatalyst and selective fluorosensing platform

The present work describes the development of TiO2/SeO2 nanostructure as a potential candidate for visible light photocatalysis as well as selective fluorophore for the sensing of picric acid. The obtained nanostructure consists of uniform globular nanoparticles having approximate size of 170 nm and possess an optical band gap of 2.33 eV with absorption maxima at 473 nm. The photocatalyst was able to achieve 90.34% degradation efficiency for 2, 4-dichlorophenol (2,4-DCP) with rate constant of 0.0046 min-1 in the visible region. Further the nanostructure was able to serve as a selective fluorophore for sensing of Picric acid portraying more than 95% of fluorescence quenching when the concentration of PA is 10-4 M. Theoretical calculations indicate the interaction of organic pollutants with the nanostructure and reveal that both picric acid (- 66.21 kcal/mol) and 2,4-DCP (- 12.31 kcal/mol) possess more negative binding energy values demonstrating a strong interaction of both with the nanostructure, making it suitable for the degradation as well as sensing of organic pollutants. Thus this study explains the potential of prepared catalyst for waste water treatment.

Combining photocatalytic and electrocatalytic oxidation for dibutyl phthalate degradation: the influence of carbon-coated titanium anode and metal oxide catalysts

Plasticisers, such as dibutyl phthalate (DBP), are contaminants of emerging concern (CEC) that are toxic to living things and the environment. Unlike hydrophilic pollutants, DBP shows the characteristics of hydrophilic and hydrophobic nature which makes its degradation or removal difficult using conventional treatment technologies. The current study explored the potential of photocatalysis followed by electrocatalytic oxidation (PC + EC) using vanadium pentoxide (V2O5) and carbon-coated titanium (C/Ti) anode for the removal of 75 mg L-1 DBP from water. The structural stability and changes in the functional groups after treatment of the catalyst were determined using powder XRD and FTIR studies that found the catalyst structure to be stable. Optimization studies showed that UV-A (315-400 nm) irradiation source, 112 mA cm-2 current density, 50 mg L-1 catalyst dosage, 360 min PC, 210 min EC at pH 3 and 20 mM sodium sulphate managed to degrade 99.5% of DBP with 97% COD and 87.7% TOC removal. Compared to electrocatalytic oxidation (EC), PC + EC showed 40% higher TOC removal. Reusability studies found the reduction of 45% for COD removal after four treatment cycles with V2O5, while the anode material showed no considerable decrease in its degradation efficiency. High-resolution mass spectrometry (HRMS) studies established that complete degradation was preceded by the oxidation of DBP to phthalic anhydride and phthalic acid responsible for the increase in TOC during the initial treatment period. Overall, this study lays out insights for the application of photo-electrocatlytic oxidation for the removal of ubiquitous poorly soluble water pollutants such as phthalates.

Photochemical modification of tea waste by tungsten oxide nanoparticle as a novel, low-cost and green photocatalyst for degradation of dye pollutant

So far, many adsorbents and nanocomposites have been synthesized by different methods and used to remove or degradation of dye pollutants. Nowadays, the use of natural adsorbents and their modification with simple methods based on metal oxides are of interest to many researchers. In this study, for the first time, we report the simple and low-cost modification of tea pomace waste (TPW) with tungsten oxide (WO3) based on the photochemical method as a green, cost-effective, and biodegradable photocatalyst for the degradation of Rh B dye pollutant. The results obtained from FE-SEM, EDAX, XRD, XPS, PL, BET and UV-Vis Diffusive Reflectance (DRS) analyses confirmed the successful modification of the TPW surface with WO3 (WO3/TPW). The parameters affecting the photocatalytic behavior of WO3/TPW, including the time of photochemical modification and the type of radiation on its photocatalytic activity, were carefully optimized. WO3/TPW showed excellent photocatalytic activity compared to TPW for the degradation of Rh B dye pollutant under UV light for 30 min (94 %). Finally, the effective parameters on the value of Rh B dye degradation by WO3/TPW photocatalyst including pH, adsorbent dosage, the concentration of dye pollutant, and the kinetics of the degradation process were studied. It is expected that this type of photochemical modification method and natural WO3/TPW photocatalyst will be a promising path for the synthesis, modification, and increase of the photocatalytic performance of natural adsorbents.

Nanomaterials Based Multifunctional Bioactivities of V2O5 and Mesoporous Carbon@V2O5 Composite: Preparation and Characterization

Nanocarriers have attracted considerable interest due to their prospective applications in the delivery of anticancer medications and their distinct bioactivities. Biogenic nanostructures can be effective nanocarriers for delivering drugs as a consequence of sustainable and biodegradable biomass-derived nanostructures that perform specific functions. In this case, a vanadium oxide (V2O5) and mesoporous carbon@V2O5 (C@V) composite was developed as a possible drug delivery system, and its bioactivities, including antioxidant, antibacterial, and anticancer, were investigated. Doxorubicin (DOX), an anticancer drug, was introduced to the nanoparticles, and the loading and release investigation was conducted. Strong interfacial interactions between mesoporous carbon (MC) and V2O5 nanostructures have been found to improve performance in drug loading and release studies and bioactivities. After incubation, the potent anticancer effectiveness was seen based on C@V nanocomposite. This sample was also utilized to research potential biomedical uses as an antioxidant, antibacterial, and anticancer. The most effective antioxidant, the C@V sample (61.2%), exhibited a higher antioxidant activity than the V-2 sample (44.61%). The C@V sample ultimately attained a high DOX loading efficacy of 88%, in comparison to a pure V2O5 sample (V-2) loading efficacy of 80%. Due to the combination of mesoporous carbon and V2O5, which increases specific surface area and surface sites of action as well as the morphology, it proved that the mesoporous carbon@V2O5 composite (C@V) sample demonstrated greater efficacy.

2D Materials Nanoarchitectonics for 3D Structures/Functions

It has become clear that superior material functions are derived from precisely controlled nanostructures. This has been greatly accelerated by the development of nanotechnology. The next step is to assemble materials with knowledge of their nano-level structures. This task is assigned to the post-nanotechnology concept of nanoarchitectonics. However, nanoarchitectonics, which creates intricate three-dimensional functional structures, is not always easy. Two-dimensional nanoarchitectonics based on reactions and arrangements at the surface may be an easier target to tackle. A better methodology would be to define a two-dimensional structure and then develop it into a three-dimensional structure and function. According to these backgrounds, this review paper is organized as follows. The introduction is followed by a summary of the three issues; (i) 2D to 3D dynamic structure control: liquid crystal commanded by the surface, (ii) 2D to 3D rational construction: a metal-organic framework (MOF) and a covalent organic framework (COF); (iii) 2D to 3D functional amplification: cells regulated by the surface. In addition, this review summarizes the important aspects of the ultimate three-dimensional nanoarchitectonics as a perspective. The goal of this paper is to establish an integrated concept of functional material creation by reconsidering various reported cases from the viewpoint of nanoarchitectonics, where nanoarchitectonics can be regarded as a method for everything in materials science.

Construction of a g-C3N4/Bi(OH)3 Heterojunction for the Enhancement of Visible Light Photocatalytic Antibacterial Activity

Photocatalytic technology has been recently conducted to remove microbial contamination due to its unique features of nontoxic by-products, low cost, negligible microbial resistance and broad-spectrum elimination capacity. Herein, a novel two dimensional (2D) g-C3N4/Bi(OH)3 (CNB) heterojunction was fabricated byincorporating Bi(OH)3 (BOH) nanoparticles with g-C3N4 (CN) nanosheets. This CNB heterojunction exhibited high photocatalytic antibacterial efficiency (99.3%) against Escherichia coli (E. coli) under visible light irradiation, which was 4.3 and 3.4 times that of BOH (23.0%) and CN (28.0%), respectively. The increase in specific surface area, ultra-thin layered structure, construction of a heterojunction and enhancement of visible light absorption were conducive to facilitating the separation and transfer of photoinduced charge carriers. Live/dead cell staining, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) assays and scanning electron microscopy (SEM) have been implemented to investigate the damage to the cell membrane and the leakage of the intracellular protein in the photocatalytic antibacterial process. The e-, h+ and O2•- were the active species involved in this process. This study proposed an appropriate photocatalyst for efficient treatment of bacterial contamination.

Materials Nanoarchitectonics at Dynamic Interfaces: Structure Formation and Functional Manipulation

The next step in nanotechnology is to establish a methodology to assemble new functional materials based on the knowledge of nanotechnology. This task is undertaken by nanoarchitectonics. In nanoarchitectonics, we architect functional material systems from nanounits such as atoms, molecules, and nanomaterials. In terms of the hierarchy of the structure and the harmonization of the function, the material created by nanoarchitectonics has similar characteristics to the organization of the functional structure in biosystems. Looking at actual biofunctional systems, dynamic properties and interfacial environments are key. In other words, nanoarchitectonics at dynamic interfaces is important for the production of bio-like highly functional materials systems. In this review paper, nanoarchitectonics at dynamic interfaces will be discussed, looking at recent typical examples. In particular, the basic topics of "molecular manipulation, arrangement, and assembly" and "material production" will be discussed in the first two sections. Then, in the following section, "fullerene assembly: from zero-dimensional unit to advanced materials", we will discuss how various functional structures can be created from the very basic nanounit, the fullerene. The above examples demonstrate the versatile possibilities of architectonics at dynamic interfaces. In the last section, these tendencies will be summarized, and future directions will be discussed.

V2O5-Fe3O4/rGO Ternary Nanocomposite with Dual Applications as a Dye Degradation Photocatalyst and OER Electrocatalyst

The design and synthesis of structured nanomaterials with dual properties have always been highly attractive in various fields, especially in the reduction of environmental pollution as well as the generation of renewable energy. In this study, the synthesized ternary V2O5-Fe3O4/rGO nanocomposite was investigated to evaluate both the photocatalytic and electrocatalytic activities for the removal of methylene blue (MB) dye under UV/visible light radiation and oxygen evolution reaction (OER), respectively. The magnetized V2O5-Fe3O4/rGO nanocomposite is characterized by TEM, FE-SEM (with coupling by elemental mapping), EDS, XRD, FTIR, Raman, PL, DRS, and UV-vis analyses. The obtained results show that the graphene oxide substrate is decorated very well using Fe3O4 and V2O5 nanoparticles and converted to reduced graphene oxide (rGO). Furthermore, the V2O5-Fe3O4/rGO nanocomposite is considered as an active catalyst material to modify the commercial glassy carbon electrode for OER using linear sweep voltammetry (LSV). The photocatalytic activity of this novel nanocomposite revealed 89.2% (kobs = 1.7 × 10-2 min-1) and 76% (kobs = 8.3 × 10-3 min-1) degradation efficiencies of MB dye under UV and visible light irradiation at room temperature, respectively, and the surface area of the V2O5-Fe3O4/rGO nanocomposite was examined to be 705.8 cm2/g by N2 adsorption-desorption isotherms. In addition, electrochemical measurements determined the best OER performance of the ternary nanocomposite with the lowest overpotential (458 mV) and Tafel slope (132 mV dec-1) compared to the rGO substrate, Fe3O4, V2O5 nanoparticles, and binary nanocomposites. This work shows much enhancements in both photocatalytic and electrocatalytic activities due to the synergistic effect of the decorated GO support with V2O5 and Fe3O4 nanoparticles.

Bioderived Mesoporous Carbon@Tungsten Oxide Nanocomposite as a Drug Carrier Vehicle of Doxorubicin for Potent Cancer Therapy

Scientists have investigated the possibility of employing nanomaterials as drug carriers. These nanomaterials can preserve their content and transport it to the target region in the body. In this investigation, we proposed a simple method for developing distinctive, bioderived nanostructures with mesoporous carbon nanoparticles impregnated with tungsten oxide (WO3). Prior to characterizing and encapsulating WO3 with bioderived mesoporous carbon, the anticancer drug doxorubicin (DOX) was added to the nanoparticles and examined loading and release study. The approaches for both nanoparticle production and characterization are discussed in detail. Colloidal qualities of the nanomaterial can be effectively preserved while also allowing transdermal transportation of nanoparticles into the body by forming them into green, reusable, and porous nanostructures. Although the theories of nanoparticles and bioderived carbon each have been studied separately, the combination presents a new route to applications connected to nanomedicine. Furthermore, this sample was used to study exotic biomedical applications, such as antioxidant, antimicrobial, and anticancer activities. The W-3 sample had lower antioxidant activity (44.01%) than the C@W sample (56.34%), which was the most potent. A high DOX entrapment effectiveness of 97% was eventually achieved by the C@W sample, compared to a pure WO3 entrapment efficiency of 91%. It was observed that the Carbon/WO3 composite (C@W) sample showed more efficacy because the mesoporous carbon composition with WO3 increases the average surface area and surface-active locations.

Fabrication of Z-Type TiN@(A,R)TiO2 Plasmonic Photocatalyst with Enhanced Photocatalytic Activity

Plasmonic effect-enhanced Z-type heterojunction photocatalysts comprise a promising solution to the two fundamental problems of current TiO₂-based photocatalysis concerning low-charge carrier separation efficiency and low utilization of solar illumination. A plasmonic effect-enhanced TiN@anatase-TiO₂/rutile-TiO₂ Z-type heterojunction photocatalyst with the strong interface of the N-O chemical bond was synthesized by hydrothermal oxidation of TiN. The prepared photocatalyst shows desirable visible light absorption and good visible-light-photocatalytic activity. The enhancement in photocatalytic activities contribute to the plasma resonance effect of TiN, the N-O bond-connected charge transfer channel at the TiO₂/TiN heterointerface, and the synergistically Z-type charge transfer pathway between the anatase TiO₂ (A-TiO₂) and rutile TiO₂ (R-TiO₂). The optimization study shows that the catalyst with a weight ratio of A-TiO₂/R-TiO₂/TiN of approximately 15:1:1 achieved the best visible light photodegradation activity. This work demonstrates the effectiveness of fabricating plasmonic effect-enhanced Z-type heterostructure semiconductor photocatalysts with enhanced visible-light-photocatalytic activities.

Photocatalytic degradation of organic pollutants by carbon quantum dots functionalized g-C3N4: A review

Graphitic carbon nitride (g-C₃N₄) has received much attention due to its unique characteristics of stable physicochemical features, facile preparation, and inexpensive cost. However, the bulk g-C₃N₄ has a weak capacity for pollutant degradation and needs to be modified for real application. Therefore, extensive research has been done on g-C₃N₄, and the discovery of the novel zero-dimensional nanomaterials known as carbon quantum dots (CQDs) provided it with a unique modification option. In this review, the development for the removal of organic pollutants by g-C₃N₄/CQDs was discussed. Firstly, the preparation of g-C₃N₄/CQDs were introduced. Then, the application and the degradation mechanism of g-C₃N₄/CQDs were briefly described. And the discussion of the influencing factors on g-C₃N₄/CQDs' ability to degrade organic pollutants came in third. Finally, the conclusions of photocatalytic degradation of organic pollutants by g-C₃N₄/CQDs and future perspectives followed. This review will strengthen the understanding of the photocatalytic degradation of real organic wastewater by g-C₃N₄/CQDs, including their preparation, application, mechanism, and influencing factors.

A Thorough Examination of the Solution Conditions and the Use of Carbon Nanoparticles Made from Commercial Mesquite Charcoal as a Successful Sorbent for Water Remediation

Water pollution has invaded seas, rivers, and tap water worldwide. This work employed commercial Mesquite charcoal as a low-cost precursor for fabricating Mesquite carbon nanoparticles (MUCNPs) using a ball-milling process. The scanning electron energy-dispersive microscopy results for MUCNPs revealed a particle size range of 52.4-75.0 nm. The particles were composed mainly of carbon with trace amounts of aluminum, potassium, calcium, titanium, and zinc. The X-ray diffraction peaks at 26.76 and 43.28 2θ° ascribed to the (002) and (100) planes indicated a crystalized graphite phase. Furthermore, the lack of FT-IR vibrations above 3000 cm^-1 showed that the MUCNPs were not functionalized. The MUCNPs' pore diameter, volume, and surface area were 114.5 Ǻ, 0.363 cm³ g^-1, and 113.45 m² g^-1. The batch technique was utilized to investigate MUCNPs' effectiveness in removing chlorohexidine gluconate (CHDNG) from water, which took 90 min to achieve equilibrium and had an adsorption capacity of 65.8 mg g^-1. The adsorption of CHDNG followed pseudo-second-order kinetics, with the rate-limiting step being diffusion in the liquid film. The Langmuir isotherm dominated the CHDNG adsorption on the MUCNPs with a correlation coefficient of 0.99. The thermodynamic studies revealed that CHDNG adsorption onto the MUCNPs was exothermic and favorable, and its spontaneity increased inversely with CHDNG concentration. The ball-milling-made MUCNPs demonstrated consistent efficiency through regeneration-reuse cycles.

The Photocatalytic Activity of CaTiO3 Derived from the Microwave-Melting Heating Process of Blast Furnace Slag

The extraction of titanium-bearing components in the form of CaTiO₃ is an efficient utilization of blast furnace slag. The photocatalytic performance of this obtained CaTiO₃ (MM-CaTiO₃) as a catalyst for methylene blue (MB) degradation was evaluated in this study. The analyses indicated that the MM-CaTiO₃ had a completed structure with a special length-diameter ratio. Furthermore, the oxygen vacancy was easier to generate on a MM-CaTiO₃(110) plane during the photocatalytic process, contributing to improving photocatalytic activity. Compared with traditional catalysts, MM-CaTiO₃ has a narrower optical band gap and visible-light responsive performance. The degradation experiments further confirmed that the photocatalytic degradation efficiency of pollutants by using MM-CaTiO₃ was 3.2 times that of pristine CaTiO₃ in optimized conditions. Combined with molecular simulation, the degradation mechanism clarified that acridine of MB molecular was stepwise destroyed by using MM-CaTiO₃ in short times, which is different from demethylation and methylenedioxy ring degradation by using TiO₂. This study provided a promising routine for using solid waste to obtain catalysts with excellent photocatalytic activity and was found to be in keeping with sustainable environmental development.

Remarkable Pyro-Catalysis of g-C3N4 Nanosheets for Dye Decoloration under Room-Temperature Cold-Hot Cycle Excitation

Pyroelectric materials have the ability to convert the environmental cold-hot thermal energy such as day-night temperature alternation into electrical energy. The novel pyro-catalysis technology can be designed and realized on the basis of the product coupling between pyroelectric and electrochemical redox effects, which is helpful for the actual dye decomposition. The organic two-dimensional (2D) graphic carbon nitride (g-C₃N₄), as an analogue of graphite, has attracted considerable interest in the field of material science; however, its pyroelectric effect has rarely been reported. In this work, the remarkable pyro-catalytic performance was achieved in the 2D organic g-C₃N₄ nanosheet catalyst materials under the continuous room-temperature cold-hot thermal cycling excitation from 25 °C to 60 °C. The pyro-catalytic RhB dye decoloration efficiency of the 2D organic g-C₃N₄ can reach ~92.6%. Active species such as the superoxide radicals and hydroxyl radicals are observed as the intermediate products in the pyro-catalysis process of the 2D organic g-C₃N₄ nanosheets. The pyro-catalysis of the 2D organic g-C₃N₄ nanosheets provides efficient technology for wastewater treatment applications, utilizing the ambient cold-hot alternation temperature variations in future.

Nanotextured CeO2-SnO2 Composite: Efficient Photocatalytic, Antibacterial, and Energy Storage Fibers

Bacterial infections remain a serious and pervasive threat to human health. Bacterial antibiotic resistance, in particular, lowers treatment efficacy and increases mortality. The development of nanomaterials has made it possible to address issues in the biomedical, energy storage, and environmental fields. This paper reports the successful synthesis of CeO₂-SnO₂ composite nanofibers via an electrospinning method using polyacrylonitrile polymer. Scanning and transmission electron microscopy assessments showed that the average diameter of CeO₂-SnO₂ nanofibers was 170 nm. The result of photocatalytic degradation for methylene blue dye displayed enhanced efficiency of the CeO₂-SnO₂ composite. The addition of SnO₂ to CeO₂ resulted in the enhancement of the light absorption property and enriched charge transmission of photoinduced electron-hole duos, which conspicuously contributed to momentous photoactivity augmentation. Composite nanofibers exhibited higher specific capacitance which may be accredited to the synergism between CeO₂ and SnO₂ particles in nanofibers. Furthermore, antibacterial activity was screened against Escherichia coli and CeO₂-SnO₂ composite nanofibers depicted excellent activity. The findings of this work point to new possibilities as an electrode material in energy storage systems and as a visible-light-active photocatalyst for the purification of chemical and biological contaminants, which would substantially benefit environmental remediation processes.

Enhanced degradation of ibuprofen using a combined treatment of plasma and Fenton reactions

Advanced oxidation technologies (AOTs) proved to be effective in the degradation of hazardous organic impurities like acids, dyes, antibiotics etc. in the last few decades. AOTs are mainly based on the generation of reactive chemical species (RCS) such as hydroxyl, superoxide radicals etc., which plays an important role in the degradation of organiccompounds. In this work, plasma supported AOT i.e. Fenton reactions have been applied for the degradation of ibuprofen. As compared to traditional AOTs plasma assisted AOT is technologically superior due to its capability to produce RCS at a controlled rate without using chemical agents. This process work at normal room temperature and pressure. Herein, we optimized better operating conditions to generate good plasma discharge and hydroxyl radicals based on critical parameters, including frequency, pulse width and different gases like O₂, Ar etc. Also, the one-pot carbonization method is used for the synthesis of Fe-based ordered mesoporous carbon (OMC) as a heterogeneous catalyst for the Fenton reactions. Using plasma-supported Fenton reactions, 88.3 % degradation efficiency is achieved using Fe-OMC catalyst for the ibuprofen degradation. Also, the mineralization of the ibuprofen is studied using total organic carbon (TOC) analysis.

Single-Step Synthesis of Graphitic Carbon Nitride Nanomaterials by Directly Calcining the Mixture of Urea and Thiourea: Application for Rhodamine B (RhB) Dye Degradation

Recently, polymeric graphitic carbon nitride (g-C₃N₄) has been explored as a potential catalytic material for the removal of organic pollutants in wastewater. In this work, graphitic carbon nitride (g-C₃N₄) photocatalysts were synthesized using mixtures of low-cost, environment-friendly urea and thiourea as precursors by varying calcination temperatures ranging from 500 to 650 °C for 3 h in an air medium. Different analytical methods were used to characterize prepared g-C₃N₄ samples. The effects of different calcination temperatures on the structural, morphological, optical, and physiochemical properties of g-C₃N₄ photocatalysts were investigated. The results showed that rhodamine B (RhB) dye removal efficiency of g-C₃N₄ prepared at a calcination temperature of 600 °C exhibited 94.83% within 180 min visible LED light irradiation. Photocatalytic activity of g-C₃N₄ was enhanced by calcination at higher temperatures, possibly by increasing crystallinity that ameliorated the separation of photoinduced charge carriers. Thus, controlling the type of precursors and calcination temperatures has a great impact on the photocatalytic performance of g-C₃N₄ towards the photodegradation of RhB dye. This investigation provides useful information about the synthesis of novel polymeric g-C₃N₄ photocatalysts using a mixture of two different environmentally benign precursors at high calcination temperatures for the photodegradation of organic pollutants.

Composites of Lignin-Based Biochar with BiOCl for Photocatalytic Water Treatment: RSM Studies for Process Optimization

Textile effluents pose a massive threat to the aquatic environment, so, sustainable approaches for environmentally friendly multifunctional remediation methods degradation are still a challenge. In this study, composites consisting of bismuth oxyhalide nanoparticles, specifically bismuth oxychloride (BiOCl) nanoplatelets, and lignin-based biochar were synthesized following a one-step hydrolysis synthesis. The simultaneous photocatalytic and adsorptive remediation efficiency of the Biochar-BiOCl composites were studied for the removal of a benchmark azo anionic dye, methyl orange dye (MO). The influence of various parameters (such as catalyst dosage, initial dye concentration, and pH) on the photo-assisted removal was carried out and optimized using the Box-Behnken Design of RSM. The physicochemical properties of the nanomaterials were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, thermogravimetric analysis, nitrogen sorption, and UV-Vis diffuse reflectance spectroscopy (DRS). The maximum dye removal was observed at a catalyst dosage of 1.39 g/L, an initial dye concentration of 41.8 mg/L, and a pH of 3.15. The experiment performed under optimized conditions resulted in 100% degradation of the MO after 60 min of light exposure. The incorporation of activated biochar had a positive impact on the photocatalytic performance of the BiOCl photocatalyst for removing the MO due to favorable changes in the surface morphology, optical absorption, and specific surface area and hence the dispersion of the photo-active nanoparticles leading to more photocatalytic active sites. This study is within the frames of the design and development of green-oriented nanomaterials of low cost for advanced (waste)water treatment applications.