1
|
Ji M, Li F, Li J, Zhang C, Peng S, Li J, Man J. A sustainable zein-based adhesive for various substrates with improved adhesion and stability. Int J Biol Macromol 2024; 277:134234. [PMID: 39074700 DOI: 10.1016/j.ijbiomac.2024.134234] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/20/2024] [Revised: 07/21/2024] [Accepted: 07/26/2024] [Indexed: 07/31/2024]
Abstract
Biomass-based adhesives are gaining attention as environmentally friendly alternatives to toxic petroleum-based adhesives. However, biomass-based adhesives exhibit poor adhesive properties and are highly susceptible to failure in humid environments. In this study, a zein-based adhesive with high adhesive strength and good water resistance was prepared by optimizing the solvent composition and adding tannic acid. Adding 10 wt% acetic acid to an aqueous ethanol solvent increased the shear strength by 45.4 % to 3.09 MPa. Moreover, the addition of 6 wt% tannic acid improved the shear strength of the zein-based adhesive in humid environments from 0.63 to 1.58 MPa. The tannic acid-reinforced zein-based adhesive exhibited good adhesive strength in both humid and dry environments, which was maintained for 30 days on glass, and could be applied to a wide range of substrates. Moreover, the adhesive showed an antioxidant activity >94 %, excellent thermal stability, biocompatibility, and antibacterial effect. Therefore, this adhesive has great application prospects in medical, packaging, and other fields.
Collapse
Affiliation(s)
- Maocheng Ji
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China
| | - Fangyi Li
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China.
| | - Jianyong Li
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China.
| | - Chuanwei Zhang
- College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China
| | - Sixian Peng
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China
| | - Jianfeng Li
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China
| | - Jia Man
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture (Ministry of Education), School of Mechanical Engineering, Shandong University, Jinan 250061, China; National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, China.
| |
Collapse
|
2
|
Cui T, Zhou D, Zhang Y, Kong D, Wang Z, Han Z, Song M, Aimaier X, Dan Y, Zhang B, Li H. A pH-Responsive Polycaprolactone-Copper Peroxide Composite Coating Fabricated via Suspension Flame Spraying for Antimicrobial Applications. MATERIALS (BASEL, SWITZERLAND) 2024; 17:2666. [PMID: 38893930 PMCID: PMC11173732 DOI: 10.3390/ma17112666] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/24/2024] [Revised: 05/17/2024] [Accepted: 05/28/2024] [Indexed: 06/21/2024]
Abstract
In this study, a pH-responsive polycaprolactone (PCL)-copper peroxide (CuO2) composite antibacterial coating was developed by suspension flame spraying. The successful synthesis of CuO2 nanoparticles and fabrication of the PCL-CuO2 composite coatings were confirmed by microstructural and chemical analysis. The composite coatings were structurally homogeneous, with the chemical properties of PCL well maintained. The acidic environment was found to effectively accelerate the dissociation of CuO2, allowing the simultaneous release of Cu2+ and H2O2. Antimicrobial tests clearly revealed the enhanced antibacterial properties of the PCL-CuO2 composite coating against both Escherichia coli and Staphylococcus aureus under acidic conditions, with a bactericidal effect of over 99.99%. This study presents a promising approach for constructing pH-responsive antimicrobial coatings for biomedical applications.
Collapse
Affiliation(s)
- Tingting Cui
- Cixi Biomedical Research Institute, Wenzhou Medical University, Wenzhou 325035, China; (T.C.); (D.Z.); (Y.Z.); (D.K.); (Z.W.); (Z.H.); (M.S.); (X.A.)
- Institute of Biomedical Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Daofeng Zhou
- Cixi Biomedical Research Institute, Wenzhou Medical University, Wenzhou 325035, China; (T.C.); (D.Z.); (Y.Z.); (D.K.); (Z.W.); (Z.H.); (M.S.); (X.A.)
- Institute of Biomedical Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Yu Zhang
- Cixi Biomedical Research Institute, Wenzhou Medical University, Wenzhou 325035, China; (T.C.); (D.Z.); (Y.Z.); (D.K.); (Z.W.); (Z.H.); (M.S.); (X.A.)
- Institute of Biomedical Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Decong Kong
- Cixi Biomedical Research Institute, Wenzhou Medical University, Wenzhou 325035, China; (T.C.); (D.Z.); (Y.Z.); (D.K.); (Z.W.); (Z.H.); (M.S.); (X.A.)
- Institute of Biomedical Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Zhijuan Wang
- Cixi Biomedical Research Institute, Wenzhou Medical University, Wenzhou 325035, China; (T.C.); (D.Z.); (Y.Z.); (D.K.); (Z.W.); (Z.H.); (M.S.); (X.A.)
- Institute of Biomedical Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Zhuoyue Han
- Cixi Biomedical Research Institute, Wenzhou Medical University, Wenzhou 325035, China; (T.C.); (D.Z.); (Y.Z.); (D.K.); (Z.W.); (Z.H.); (M.S.); (X.A.)
- Institute of Biomedical Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Meiqi Song
- Cixi Biomedical Research Institute, Wenzhou Medical University, Wenzhou 325035, China; (T.C.); (D.Z.); (Y.Z.); (D.K.); (Z.W.); (Z.H.); (M.S.); (X.A.)
- Institute of Biomedical Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Xierzhati Aimaier
- Cixi Biomedical Research Institute, Wenzhou Medical University, Wenzhou 325035, China; (T.C.); (D.Z.); (Y.Z.); (D.K.); (Z.W.); (Z.H.); (M.S.); (X.A.)
- Institute of Biomedical Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Yanxin Dan
- Graduate School of Engineering, Tohoku University, Sendai 980-8577, Japan;
| | - Botao Zhang
- Cixi Biomedical Research Institute, Wenzhou Medical University, Wenzhou 325035, China; (T.C.); (D.Z.); (Y.Z.); (D.K.); (Z.W.); (Z.H.); (M.S.); (X.A.)
- Institute of Biomedical Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
- Zhejiang-Japan Joint Laboratory for Antibacterial and Antifouling Technology, Ningbo Cixi Institute of Biomedical Engineering, Ningbo 315201, China
| | - Hua Li
- Cixi Biomedical Research Institute, Wenzhou Medical University, Wenzhou 325035, China; (T.C.); (D.Z.); (Y.Z.); (D.K.); (Z.W.); (Z.H.); (M.S.); (X.A.)
- Institute of Biomedical Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
- Zhejiang-Japan Joint Laboratory for Antibacterial and Antifouling Technology, Ningbo Cixi Institute of Biomedical Engineering, Ningbo 315201, China
| |
Collapse
|
3
|
Wang L, Rose D, Li K, Chen X, He L. Conformational changes to zein and its binding interactions with sodium caseinate during the pH-driven self-assembly using multi-spectroscopic and hydrostatic methods. Food Hydrocoll 2023. [DOI: 10.1016/j.foodhyd.2022.108225] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/04/2022]
|
4
|
Mahlumba P, Kumar P, du Toit LC, Poka MS, Ubanako P, Choonara YE. Fabrication and Characterisation of a Photo-Responsive, Injectable Nanosystem for Sustained Delivery of Macromolecules. Int J Mol Sci 2021; 22:3359. [PMID: 33805969 PMCID: PMC8037466 DOI: 10.3390/ijms22073359] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2021] [Revised: 03/19/2021] [Accepted: 03/23/2021] [Indexed: 01/31/2023] Open
Abstract
The demand for biodegradable sustained release carriers with minimally invasive and less frequent administration properties for therapeutic proteins and peptides has increased over the years. The purpose of achieving sustained minimally invasive and site-specific delivery of macromolecules led to the investigation of a photo-responsive delivery system. This research explored a biodegradable prolamin, zein, modified with an azo dye (DHAB) to synthesize photo-responsive azoprolamin (AZP) nanospheres loaded with Immunoglobulin G (IgG). AZP nanospheres were incorporated in a hyaluronic acid (HA) hydrogel to develop a novel injectable photo-responsive nanosystem (HA-NSP) as a potential approach for the treatment of chorio-retinal diseases such as age-related macular degeneration (AMD) and diabetic retinopathy. AZP nanospheres were prepared via coacervation technique, dispersed in HA hydrogel and characterised via infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Size and morphology were studied via scanning electron microscopy (SEM) and dynamic light scattering (DLS), UV spectroscopy for photo-responsiveness. Rheological properties and injectability were investigated, as well as cytotoxicity effect on HRPE cell lines. Particle size obtained was <200 nm and photo-responsiveness to UV = 365 nm by decreasing particle diameter to 94 nm was confirmed by DLS. Encapsulation efficiency of the optimised nanospheres was 85% and IgG was released over 32 days up to 60%. Injectability of HA-NSP was confirmed with maximum force 10 N required and shear-thinning behaviour observed in rheology studies. In vitro cell cytotoxicity effect of both NSPs and HA-NSP showed non-cytotoxicity with relative cell viability of ≥80%. A biocompatible, biodegradable injectable photo-responsive nanosystem for sustained release of macromolecular IgG was successfully developed.
Collapse
Affiliation(s)
- Pakama Mahlumba
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Science, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa; (P.M.); (P.K.); (L.C.d.T.); (P.U.)
| | - Pradeep Kumar
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Science, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa; (P.M.); (P.K.); (L.C.d.T.); (P.U.)
| | - Lisa C. du Toit
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Science, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa; (P.M.); (P.K.); (L.C.d.T.); (P.U.)
| | - Madan S. Poka
- Division of Pharmaceutical Sciences, School of Pharmacy, Sefako Makgatho Health Sciences University, Pretoria 0208, South Africa;
| | - Philemon Ubanako
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Science, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa; (P.M.); (P.K.); (L.C.d.T.); (P.U.)
| | - Yahya E. Choonara
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Science, Faculty of Health Sciences, University of the Witwatersrand, Johannesburg, 7 York Road, Parktown 2193, South Africa; (P.M.); (P.K.); (L.C.d.T.); (P.U.)
| |
Collapse
|
5
|
Aguilera-Correa JJ, Esteban J, Vallet-Regí M. Inorganic and Polymeric Nanoparticles for Human Viral and Bacterial Infections Prevention and Treatment. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:E137. [PMID: 33435597 PMCID: PMC7826792 DOI: 10.3390/nano11010137] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/22/2020] [Accepted: 01/05/2021] [Indexed: 02/07/2023]
Abstract
Infectious diseases hold third place in the top 10 causes of death worldwide and were responsible for more than 6.7 million deaths in 2016. Nanomedicine is a multidisciplinary field which is based on the application of nanotechnology for medical purposes and can be defined as the use of nanomaterials for diagnosis, monitoring, control, prevention, and treatment of diseases, including infectious diseases. One of the most used nanomaterials in nanomedicine are nanoparticles, particles with a nano-scale size that show highly tunable physical and optical properties, and the capacity to a wide library of compounds. This manuscript is intended to be a comprehensive review of the available recent literature on nanoparticles used for the prevention and treatment of human infectious diseases caused by different viruses, and bacteria from a clinical point of view by basing on original articles which talk about what has been made to date and excluding commercial products, but also by highlighting what has not been still made and some clinical concepts that must be considered for futures nanoparticles-based technologies applications.
Collapse
Affiliation(s)
- John Jairo Aguilera-Correa
- Department of Chemistry in Pharmaceutical Sciences, School of Pharmacy, Research Institute Hospital 12 de Octubre (i+12), Complutense University of Madrid, Plaza Ramón y Cajal s/n, 28040 Madrid, Spain
| | - Jaime Esteban
- Clinical Microbiology Department, Jiménez Díaz Foundation Health Research Institute, Autonomous University of Madrid, Av. Reyes Católicos 2, 28040 Madrid, Spain;
| | - María Vallet-Regí
- Department of Chemistry in Pharmaceutical Sciences, School of Pharmacy, Research Institute Hospital 12 de Octubre (i+12), Complutense University of Madrid, Plaza Ramón y Cajal s/n, 28040 Madrid, Spain
- Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), 28029 Madrid, Spain
| |
Collapse
|
6
|
Agrawal S, Patel PR, Gundloori RVN. Proteins as Nanocarriers To Regulate Parenteral Delivery of Tramadol. ACS OMEGA 2019; 4:6301-6310. [PMID: 31459770 PMCID: PMC6647997 DOI: 10.1021/acsomega.8b02060] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/16/2018] [Accepted: 03/25/2019] [Indexed: 06/10/2023]
Abstract
Tramadol (Td) is a centrally acting opioid analgesic drug used for the treatment of moderate to severe pain. However, the half-life of Td is about 6-8 h, which is a major drawback. To increase the half-life of Td, it needs to be entrapped in a suitable substrate with the capability to release the drug for an extended period of time. Accordingly, in our studies, new protein blends in various compositions were prepared using hydrophilic (egg albumin) and hydrophobic (zein) proteins and fabricated them as nanoparticles with Td by the desolvation method. The prepared nanoparticles were characterized using analytical techniques. The morphology and diameter of the nanoparticles were determined by an environmental scanning electron microscope. The interactions between Td and proteins were confirmed by fluorescence spectroscopy, and the secondary structural changes were evaluated by circular dichroism. The hemolysis test and MTT assay indicated that the nanoparticles were nontoxic, and drug release studies showed an extended duration of release of Td for more than 48 h. The mechanism of the drug release followed the zero order. The overall studies inferred that these protein based nanoparticles have potential to release Td at a slow rate for an extended period of time. Further manipulation of the protein composition may regulate the duration of Td release for an effective therapy.
Collapse
Affiliation(s)
- Shubhang Agrawal
- Polymer
Science and Engineering, CSIR-National Chemical
Laboratory, Homi Bhabha Road, Pune 411008, India
- Rungta
College of Pharmaceutical Science and Research, Rungta Educational Campus, Khoka-Kurud Road, Bhilai, Chhattisgarh 490024, India
| | - Pratikshkumar R. Patel
- Polymer
Science and Engineering, CSIR-National Chemical
Laboratory, Homi Bhabha Road, Pune 411008, India
- Academy
of Scientific and Innovative Research, CSIR-NCL
Campus, Pune 411008, India
| | - Rathna Venkata Naga Gundloori
- Polymer
Science and Engineering, CSIR-National Chemical
Laboratory, Homi Bhabha Road, Pune 411008, India
- Academy
of Scientific and Innovative Research, CSIR-NCL
Campus, Pune 411008, India
| |
Collapse
|
7
|
Li J, Xu X, Chen Z, Wang T, Wang L, Zhong Q. Biological macromolecule delivery system fabricated using zein and gum arabic to control the release rate of encapsulated tocopherol during in vitro digestion. Food Res Int 2018; 114:251-257. [PMID: 30361023 DOI: 10.1016/j.foodres.2018.08.073] [Citation(s) in RCA: 25] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/05/2018] [Revised: 05/17/2018] [Accepted: 08/23/2018] [Indexed: 10/28/2022]
Abstract
Nanoparticles were fabricated by adsorbing gum arabic (GA) on zein nanoparticles by antisolvent precipitation. The most stable mass ratio of zein:GA was 1:1.5 with a stable zeta-potential (-32.8 mV) in a pH range of 3.0-9.0. The surface hydrophobicity of zein-GA nanoparticles indicated formation of a stable structure through electrostatic attraction at a pH range of 3.0-6.0 and hydrophobic interaction at pH 7.0-9.0. The FTIR spectrogram showed an additional role of hydrogen bonds to promote the adsorption of GA on zein nanoparticles. Tocopherol (TOC) was encapsulated within the prepared zein-GA nanoparticles with a high loading capacity. The presence of GA not only prevented the precipitation of zein nanoparticles but also controlled the release of TOC from zein-GA nanoparticles during in vitro gastrointestinal digestion. Zein-GA biopolymer nanoparticles can be stably fabricated in a wide pH range for applications in the food and pharmacy industries.
Collapse
Affiliation(s)
- Juan Li
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu 214122, China; National Engineering Laboratory for Cereal Fermentation Technology, Jiangnan University, Wuxi, Jiangsu 214122, China; Collaborative Innovation Center of Food Safety and Quality Control in Jiangsu Province, Jiangnan University, Wuxi 214122, China
| | - Xueer Xu
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu 214122, China; National Engineering Laboratory for Cereal Fermentation Technology, Jiangnan University, Wuxi, Jiangsu 214122, China
| | - Zhengxing Chen
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu 214122, China; National Engineering Laboratory for Cereal Fermentation Technology, Jiangnan University, Wuxi, Jiangsu 214122, China; Collaborative Innovation Center of Food Safety and Quality Control in Jiangsu Province, Jiangnan University, Wuxi 214122, China.
| | - Tao Wang
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu 214122, China; National Engineering Laboratory for Cereal Fermentation Technology, Jiangnan University, Wuxi, Jiangsu 214122, China
| | - Li Wang
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu 214122, China; National Engineering Laboratory for Cereal Fermentation Technology, Jiangnan University, Wuxi, Jiangsu 214122, China
| | - Qixing Zhong
- Department of Food Science and Technology, University of Tennessee, Knoxville, TN 37996-4539, USA
| |
Collapse
|