In Situ Synthesis of Ag@Cu₂O-rGO Architecture for Strong Light-Matter Interactions

SERS monitoring of methylene blue degradation by Au-Ag@Cu2O-rGO nanocomposite

A combination of multiple materials effectively improves and enhances the performance of the materials. Thus, a gold-silver@cuprous oxide (Au-Ag@Cu2O)-reduced graphene oxide (rGO) structure was designed and fabricated. We decorated the Au nanoparticles (NPs) on the Ag@Cu2O-rGO composite surface by a redox reaction to form a Au-Ag@Cu2O-rGO structure with two noble metals attached to a Cu2O semiconductor. A comparable Au-Ag@Cu2O structure was also fabricated. After decorating Au NPs into the Ag@Cu2O-rGO composite, the Au-Ag@Cu2O composite structure was loosened, and the surface and interior of the Cu2O shell were decorated with Au and Ag NPs. Moreover, the addition of Au NPs resulted in a proper surface plasmon resonance effect and a significant broadening of the absorption range. The loose structure increased the adsorption of the probe molecules, which increased the surface-enhanced Raman scattering (SERS) intensity. In addition, the fabricated Au-Ag@Cu2O-rGO exhibited excellent catalytic reduction of methylene blue (MB) with sodium borohydride (NaBH4). Therefore, the SERS-based monitoring of the MB degradation was obviously improved.

Effect of a Ag-rGO structure on the SERS activity of PEDOT:PSS films

π-Conjugated organic semiconductors with tunable electronic structures are new prospective active substrate materials for surface-enhanced Raman scattering (SERS). However, observing higher SERS activity when using organic semiconductors as substrates could be difficult because there is no plasmonic effect of hot electrons. Here, we designed a Ag-reduced graphene oxide (rGO) structure, introduced it into a poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) solution, and spin-coated the solution to obtain a Ag-rGO/PEDOT:PSS (ARPP) film. Our analyses demonstrate that the introduction of this Ag-rGO structure can not only enhance the electromagnetic field effect based on plasmon resonance but also improve the interaction between the target molecule and the substrate in the ARPP film. This innovative approach not only improves the SERS activity of π-conjugated organic polymers but also provides novel ideas for the preparation of other organic semiconductor-based SERS substrates.

Photo-Induced Charge Transfer Enhancement for SERS in a SiO2-Ag-Reduced Graphene Oxide System

Understanding and controlling the disorder in materials, especially the disorder caused by structural composition and doping effects, are important keys to studying the optical characteristics of materials. In this study, a SiO₂-Ag-reduced graphene oxide (rGO) composite structure was prepared by a simple wet chemical method, in which Ag nanoparticles (NPs) and SiO₂ were decorated onto the surface of rGO. The introduction of Si atoms can control not only the plasmon effect of Ag NPs but also, more importantly, the defect concentration of rGO. The formation of defects causes the rGO structure to enter a metastable state, which facilitates charge separation and transfer in the system. It is worth noting that changes in defect concentration can affect the energy band position of rGO; therefore, controlling the defect concentration can be used to achieve charge transfer resonance coupling. This study not only revealed the ultrahigh surface-enhanced Raman scattering activity of the substrate structure but also elucidated in detail the effect of the crystallinity of this rGO-based composite system on its optical properties.

Rapid fabrication of silver–cuprous oxide core–shell nanowires for visible light photocatalysts

This work reports a novel method that enables facile fabrication of Ag–Cu₂O core–shell nanowires (Ag@Cu₂O NWs) for visible light photocatalysts.

Highly efficient and recyclable catalyst: porous Fe3O4-Au magnetic nanocomposites with tailored synthesis

In this work, we reported the tailored design of highly efficient Fe₃O₄-Au magnetic nanocomposite (MNP) catalysts. Fe₃O₄ nanocrystals with three different morphologies have been developed with engineered amounts of urea, and the plausible mechanism has been proposed. Then by controlling the amount of Au seeds, Fe₃O₄-Au MNPs with different morphologies and tunable Au deposition have been realized. Characterizations including x-ray diffraction (XRD), transmission electron microscopy (TEM), Mössbauer spectra, and elemental mapping are implemented to unveil the structural and physical characteristics of the successfully developed Fe₃O₄-Au MNPs with different morphologies. The catalytic ability of Fe₃O₄-Au MNPs with different morphologies have been compared by applying them to degrading RhB and 4-NP, meanwhile the correlation between the amount of Au seeds and the turnover frequency as well as the catalytic ability of Fe₃O₄-Au MNPs is investigated systematically. We found that the flower-like Fe₃O₄-Au MNPs with 20 ml Au seeds added achieved the best degradation efficiency of 96.7%, and their catalytic ability were almost unchanged after recycling. Out study sheds the light into the tailored design of highly efficient and recyclable catalysts for RhB and 4-NP.

A Novel Au@Cu2O-Ag Ternary Nanocomposite with Highly Efficient Catalytic Performance: Towards Rapid Reduction of Methyl Orange Under Dark Condition

Au@Cu2O core-shell nanocomposites (NCs) were synthesized by reducing copper nitrate on Au colloids with hydrazine. The thickness of the Cu2O shells could be varied by adjusting the molar ratios of Au: Cu. The results showed that the thickness of Cu2O shells played a crucial role in the catalytic activity of Au@Cu2O NCs under dark condition. The Au@Cu2O-Ag ternary NCs were further prepared by a simple galvanic replacement reaction method. Moreover, the surface features were revealed by TEM, XRD, XPS, and UV-Vis techniques. Compared with Au@Cu2O NCs, the ternary Au@Cu2O-Ag NCs had an excellent catalytic performance. The degradation of methyl orange (MO) catalyzed by Au@Cu2O-Ag NCs was achieved within 4 min. The mechanism study proved that the synergistic effects of Au@Cu2O-Ag NCs and sodium borohydride facilitated the degradation of MO. Hence, the designed Au@Cu2O-Ag NCs with high catalytic efficiency and good stability are expected to be the ideal environmental nanocatalysts for the degradation of dye pollutants in wastewater.

Catalysis of Organic Pollutants Abatement Based on Pt-Decorated Ag@Cu2O Heterostructures

Pt-decorated Ag@Cu2O heterostructures were successfully synthesized using a simple and convenient method. The Pt nanoparticle density on the Ag@Cu2O can be controlled by changing the concentration of the Pt precursor. The synthesized Ag@Cu2O-Pt nanoparticles exhibited excellent catalytic performance, which was greatly affected by changes in the Ag@Cu2O-Pt structure. To optimize the material's properties, the synthesized Ag@Cu2O-Pt nanoparticles were used to catalyze toxic pollutants and methyl orange (MO), and nontoxic products were obtained by catalytic reduction. The Pt-decorated Ag@Cu2O nanoparticles showed excellent catalytic activity, which significantly decreased the pollutant concentration when the nanoparticles were used for catalytic reduction. The redistribution of charge transfer is the nanoparticles' main contribution to the catalytic degradation of an organic pollutant. This Pt-decorated Ag@Cu2O material has unique optical and structural characteristics that make it suitable for photocatalysis, local surface plasmon resonance, and peroxide catalysis.