Direct-Continuous Preparation of Nanostructured Titania-Silica Using Surfactant-Free Non-Scaffold Rice Starch Template

Esterified unpopped foxnut (Euryale ferox) starch: molecular and rheological characterization

BACKGROUND

Acetylated-based starches are broadly used in the food industry as emulsifiers, and as thickening and film-forming agents. Better understanding of the structural and rheological parameters would facilitate the selection of optimal acetylated starches for particular applications. Nuclear magnetic resonance (¹ H-NMR), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) patterns, and rheological properties, including elasticity (G'), loss (G") moduli, complex viscosity (η*) and study shear stress (δ), were determined for acetylated fox nut starch (FNS) samples.

RESULTS

The degree of substitution (DS) varied significantly with increasing acetyl concentration from 2-6%. Nuclear magnetic resonance analysis of acetylated FNS showed an additional chemical shift at 2.08 ppm in comparison with native FNS, confirming the linking of the H or the -OCH3 group. The acetylated FNS starches showed better short-range ordering of molecules, as confirmed by FTIR. A significant increase in the functional and gelatinization properties with increasing acetyl concentration was observed. The power law parameters (n, K) and dynamic moduli (G' and G") increased with increasing acetyl concentration and presented shear thinning behavior. The gelatinization peak temperature and enthalpy decreased with increasing acetyl concentration.

CONCLUSION

The observed DS below 2.5 would mean safe food consumption and the significant alteration of functional and structural properties with varying acetyl content will extend the use of FNS in food and allied industries. © 2023 Society of Chemical Industry.

Physicochemical, Morphological, and Cytotoxic Properties of Brazilian Jackfruit (Artocarpus heterophyllus) Starch Scaffold Loaded with Silver Nanoparticles

Due to the physical, thermal, and biological properties of silver nanoparticles (AgNPs), as well as the biocompatibility and environmental safety of the naturally occurring polymeric component, polysaccharide-based composites containing AgNPs are a promising choice for the development of biomaterials. Starch is a low-cost, non-toxic, biocompatible, and tissue-healing natural polymer. The application of starch in various forms and its combination with metallic nanoparticles have contributed to the advancement of biomaterials. Few investigations into jackfruit starch with silver nanoparticle biocomposites exist. This research intends to explore the physicochemical, morphological, and cytotoxic properties of a Brazilian jackfruit starch-based scaffold loaded with AgNPs. The AgNPs were synthesized by chemical reduction and the scaffold was produced by gelatinization. X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM-EDS), and Fourier-transform infrared spectroscopy (FTIR) were used to study the scaffold. The findings supported the development of stable, monodispersed, and triangular AgNPs. XRD and EDS analyses demonstrated the incorporation of silver nanoparticles. AgNPs could alter the scaffold’s crystallinity, roughness, and thermal stability without affecting its chemistry or physics. Triangular anisotropic AgNPs exhibited no toxicity against L929 cells at concentrations ranging from 6.25 × 10−5 to 1 × 10−3 mol·L−1, implying that the scaffolds might have had no adverse effects on the cells. The scaffolds prepared with jackfruit starch showed greater crystallinity and thermal stability, and absence of toxicity after the incorporation of triangular AgNPs. These findings indicate that jackfruit is a promising starch source for developing biomaterials.

A Comparative Loading and Release Study of Vancomycin from a Green Mesoporous Silica

Since its first use as a drug delivery system, mesoporous silica has proven to be a surprisingly efficient vehicle due to its porous structure. Unfortunately, most synthesis methods are based on using large amounts of surfactants, which are then removed by solvent extraction or heat treatment, leading to an undesired environmental impact because of the generated by-products. Hence, in the present study, we followed the synthesis of a silica material with a wormhole-like pore arrangement, using two FDA-approved substances as templates, namely Tween-20 and starch. As far as we know, it is the first study using the Tween-20/starch combo as a template for mesoporous silica synthesis. Furthermore, we investigated whether the obtained material using this novel synthesis had any potential in using it as a DDS. The material was further analyzed by XRD, TEM, FT-IR, N2 adsorption/desorption, and DLS to investigate its physicochemical features. Vancomycin was selected as the active molecule based on the extensive research engaged towards improving its bioavailability for oral delivery. The drug was loaded onto the material by using three different approaches, assuming its full retention in the final system. Thermal analysis confirmed the successful loading of vancomycin by all means, and pore volume significantly decreased upon loading, especially in the case of the vacuum-assisted method. All methods showed a slower release rate compared to the same amount of the pure drug. Loadings by physical mixing and solvent evaporation released the whole amount of the drug in 140 min, and the material loaded by the vacuum-assisted method released only 68.2% over the same period of time, leading us to conclude that vancomycin was adsorbed deeper inside the pores. The kinetic release of the three systems followed the Higuchi model for the samples loaded by physical mixing and vacuum-assisted procedures, while the solvent evaporation loading method was in compliance with the first-order model.

Photochemical Synthesis of Nanosheet Tin Di/Sulfide with Sunlight Response on Water Pollutant Degradation

The photochemical synthesis of two-dimensional (2D) nanostructured from semiconductor materials is unique and challenging. We report, for the first time, the photochemical synthesis of 2D tin di/sulfide (PS-SnS₂-x, x = 0 or 1) from thioacetamide (TAA) and tin (IV) chloride in an aqueous system. The synthesized PS-SnS₂-x were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), a particle size distribution analyzer, X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), thermal analysis, UV⁻Vis diffuse reflectance spectroscopy (DR UV⁻Vis), and photoluminescence (PL) spectroscopy. In this study, the PS-SnS₂-x showed hexagonally closed-packed crystals having nanosheets morphology with the average size of 870 nm. Furthermore, the nanosheets PS-SnS₂-x demonstrated reusable photo-degradation of methylene blue (MB) dye as a water pollutant, owing to the stable electronic conducting properties with estimated bandgap (Eg) at ~2.5 eV. Importantly, the study provides a green protocol by using photochemical synthesis to produce 2D nanosheets of semiconductor materials showing photo-degradation activity under sunlight response.

Additive-Free Rice Starch-Assisted Synthesis of Spherical Nanostructured Hematite for Degradation of Dye Contaminant

Nanostructured hematite materials for advanced applications are conventionally prepared with the presence of additives, tainting its purity with remnants of copolymer surfactants, active chelating molecules, stabilizing agents, or co-precipitating salts. Thus, preparing nanostructured hematite via additive-free and green synthesis methods remains a huge hurdle. This study presents an environmentally friendly and facile synthesis of spherical nanostructured hematite (Sp-HNP) using rice starch-assisted synthesis. The physicochemical properties of the Sp-HNP were investigated by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (DR UV-Vis), and nitrogen adsorption–desorption analysis. The Sp-HNP showed a well-crystallized structure of pure rhombohedral phase, having a spherical-shaped morphology from 24 to 48 nm, and a surface area of 20.04 m²/g. Moreover, the Sp-HNP exhibited enhanced photocatalytic degradation of methylene blue dye, owing to the large surface-to-volume ratio. The current work has provided a sustainable synthesis route to produce spherical nanostructured hematite without the use of any hazardous agents or toxic additives, in agreement with the principles of green chemistry for the degradation of dye contaminant.