Fabrication and Characterization of a Highly-Sensitive Surface-Enhanced Raman Scattering Nanosensor for Detecting Glucose in Urine

Optical Monitoring of Labile Zinc inside Metastatic Cells with Plasmonic Chemonanosensors

We report the development and characterization of an optical nanosensor for the detection of labile zinc in biological environments. The readout is based on surface-enhanced Raman scattering promoted by a Raman reporter conjugated to the inner plasmonic cavity of hollow silica nanocapsules. We quantify Zn2+ by obtaining the ratio between a Zn2+-sensitive band and a Zn2+-insensitive band. The Raman reporter measures within the range from 10-5 to 10-11 M and exhibits a limit of detection of 10-11.72 M. The nanosensor discriminates between intracellular and extracellular Zn2+ concentrations.

Plasmon-driven substitution of 4-mercaptophenylboronic acid to 4-nitrothiophenol monitored by surface-enhanced Raman spectroscopy

Plasmon-driven reactions on plasmonic nanoparticles (NPs) occur under significantly different conditions from those of classical organic synthesis and provide a promising pathway for enhancing the efficiency of various chemical processes. However, these reactions can also have undesirable effects, such as 4-mercaptophenylboronic acid (MPBA) deboronation. MPBA chemisorbs well to Ag NPs through its thiol group and can subsequently bind to diols, enabling the detection of various biological structures by surface-enhanced Raman scattering (SERS), but not upon its deboronation. To avoid this reaction, we investigated the experimental conditions of MPBA deboronation on Ag NPs by SERS. Our results showed that the level of deboronation strongly depends on both the morphology of the system and the excitation laser wavelength and power. In addition, we detected not only the expected products, namely thiophenol and biphenyl-4,4-dithiol, but also 4-nitrothiophenol (NTP). The crucial reagent for NTP formation was an oxidation product of hydroxylamine hydrochloride, the reduction agent used in Ag NP synthesis. Ultimately, this reaction was replicated by adding NaNO2 to the system, and its progress was monitored as a function of the laser power, thereby identifying a new reaction of plasmon-driven -B(OH)2 substitution for -NO2.

Surface enhanced Raman scattering active substrate based on hydrogel microspheres for pretreatment-free detection of glucose in biological samples

Determining glucose in biological samples is tedious and time-consuming due to sample pretreatment. The sample is usually pretreated to remove lipids, proteins, hemocytes and other sugars that interfere with glucose detection. A surface-enhanced Raman scattering (SERS) active substrate based on hydrogel microspheres has been developed to detect glucose in biological samples. Due to the specific catalytic action of glucose oxidase (GOX), the high selectivity of detection is guaranteed. The hydrogel substrate prepared by microfluidic droplets technology protects the silver nanoparticles from the surrounding environment and improves the stability and reproducibility of the assay. In addition, the hydrogel microspheres have size-adjustable pores that selectively allow small molecules to pass through. The pores block the entry of large molecules, such as impurities, enabling glucose detection through glucose oxidase etching without sample pretreatment. This hydrogel microsphere-SERS platform is highly sensitive and enables reproducible detection of different glucose concentrations in biological samples. The use of SERS to detect glucose provides clinicians with new diagnostic methods for diabetes and a new application opportunity for SERS-based molecular detection techniques.

Vibrational Spectroscopy in Urine Samples as a Medical Tool: Review and Overview on the Current State-of-the-Art

Although known since the first half of the twentieth century, the evolution of spectroscopic techniques has undergone a strong acceleration after the 2000s, driven by the successful development of new computer technologies suitable for analyzing the large amount of data obtained. Today's applications are no longer limited to analytical chemistry, but are becoming useful instruments in the medical field. Their versatility, rapidity, the volume of information obtained, especially when applied to biological fluids that are easy to collect, such as urine, could provide a novel diagnostic tool with great potential in the early detection of different diseases. This review aims to summarize the existing literature regarding spectroscopy analyses of urine samples, providing insight into potential future applications.

Glucose detection through surface-enhanced Raman spectroscopy: A review

Glucose detection is of vital importance to diabetes diagnosis and treatment. Optical approaches in glucose sensing have received much attention in recent years due to the relatively low cost, portable, and mini-invasive or non-invasive potentials. Surface enhanced Raman spectroscopy (SERS) endows the benefits of extremely high sensitivity because of enhanced signals and specificity due to the fingerprint of molecules of interest. However, the direct detection of glucose through SERS was challenging because of poor adsorption of glucose on bare metals and low cross section of glucose. In order to address these challenges, several approaches were proposed and utilized for glucose detection through SERS. This review article mainly focuses on the development of surface enhanced Raman scattering based glucose sensors in recent 10 years. The sensing mechanisms, rational design and sensing properties to glucose are reviewed. Two strategies are summarized as intrinsic sensing and extrinsic sensing. Four general categories for glucose sensing through SERS are discussed including SERS active platform, partition layer functionalized surface, boronic acid based sensors, and enzymatic reaction based biosensors. Finally, the challenges and outlook for SERS based glucose sensors are also presented.

Raman, Infrared and Brillouin Spectroscopies of Biofluids for Medical Diagnostics and for Detection of Biomarkers

This review surveys Infrared, Raman/SERS and Brillouin spectroscopies for medical diagnostics and detection of biomarkers in biofluids, that include urine, blood, saliva and other biofluids. These optical sensing techniques are non-contact, noninvasive and relatively rapid, accurate, label-free and affordable. However, those techniques still have to overcome some challenges to be widely adopted in routine clinical diagnostics. This review summarizes and provides insights on recent advancements in research within the field of vibrational spectroscopy for medical diagnostics and its use in detection of many health conditions such as kidney injury, cancers, cardiovascular and infectious diseases. The six comprehensive tables in the review and four tables in supplementary information summarize a few dozen experimental papers in terms of such analytical parameters as limit of detection, range, diagnostic sensitivity and specificity, and other figures of merits. Critical comparison between SERS and FTIR methods of analysis reveals that on average the reported sensitivity for biomarkers in biofluids for SERS vs FTIR is about 103 to 105 times higher, since LOD SERS are lower than LOD FTIR by about this factor. High sensitivity gives SERS an edge in detection of many biomarkers present in biofluids at low concentration (nM and sub nM), which can be particularly advantageous for example in early diagnostics of cancer or viral infections.HighlightsRaman, Infrared spectroscopies use low volume of biofluidic samples, little sample preparation, fast time of analysis and relatively inexpensive instrumentation.Applications of SERS may be a bit more complicated than applications of FTIR (e.g., limited shelf life for nanoparticles and substrates, etc.), but this can be generously compensated by much higher (by several order of magnitude) sensitivity in comparison to FTIR.High sensitivity makes SERS a noninvasive analytical method of choice for detection, quantification and diagnostics of many health conditions, metabolites, and drugs, particularly in diagnostics of cancer, including diagnostics of its early stages.FTIR, particularly ATR-FTIR can be a method of choice for efficient sensing of many biomarkers, present in urine, blood and other biofluids at sufficiently high concentrations (mM and even a few µM)Brillouin scattering spectroscopy detecting visco-elastic properties of probed liquid medium, may also find application in clinical analysis of some biofluids, such as cerebrospinal fluid and urine.

Portable and Intelligent Urine Glucose Analyzer Based on a CdTe QDs@GOx Aerogel Circular Array Sensor

Diabetes is a public health problem characterized by hyperglycemia, high mortality, and morbidity. A simple, rapid, and sensitive glucose detection method for diabetes screening and health self-management of patients with diabetes is of great significance. Therefore, an attractive urine glucose (UG) analyzer with advantages of fastness, sensitivity, and portability was developed. A cadmium telluride quantum dots (CdTe QDs)@glucose oxidase (GOx) aerogel circular array sensor can emit visible red fluorescence when excited by a 365 nm ultraviolet light source inside the analyzer. When urine samples containing glucose were dropped onto the sensor, glucose was oxidized by GOx to produce hydrogen peroxide (H₂O₂), which quenched the red fluorescence of CdTe QDs. The fluorescence images of the sensor were obtained using a CCD camera, and the linear relationship between the glucose concentration and the gray value of the fluorescence image was established. The analyzer shows good sensitivity (LOD, 0.12 mM) with a wide linear range of 0.12-26 mM. Based on the linear relation, the software of the analyzer was written in the C++ language, which can automatically give the gray value of the image and the corresponding glucose concentration. The UG analyzer was used for the detection of a large number clinical samples and compared with a variety of UG test papers, which all showed good detection performance. The novel analyzer we proposed has an important significance in the screening of diabetes and the self-management of diabetic patients.

Detection of organic dyes by surface-enhanced Raman spectroscopy using plasmonic NiAg nanocavity films

This work presents the NiAg nanocavity film for the detection of organic dyes by surface-enhanced Raman spectroscopy (SERS). Nanocavity films were prepared by colloidal lithography using 518-nm polystyrene spheres combined with the electrochemical deposition of Ni supporting layer and Ag nanoparticles homogeneous SERS-active layer. The theoretical study was modelled by finite-difference time-domain (FDTD) simulation of electromagnetic field enhancement near the nanostructured surface and experimentally proven by SERS measurement of selected organic dyes (rhodamine 6G, crystal violet, methylene blue, and malachite green oxalate) in micromolar concentration. Furthermore, the concentration dependence was investigated to prove the suitability of NiAg nanocavity films to detect ultra-low concentrations of samples. The detection limit was 1.3 × 10^-12, 1.5 × 10^-10, 1.4 × 10^-10, 7.5 × 10^-11 mol·dm^-3, and the standard deviation was 20.1%, 13.8%, 16.7%, and 19.3% for R6G, CV, MB, and MGO, respectively. The analytical enhancement factor was 3.4 × 10⁵ using R6G as a probe molecule. The principal component analysis (PCA) was performed to extract the differences in complex spectra of the dyes where the first and second PCs carry 42.43% and 31.39% of the sample variation, respectively. The achieved results demonstrated the suitability of AgNi nanocavity films for the SERS-based detection of organic dyes, with a potential in other sensing applications.

Nanosensors based on LSPR are able to serologically differentiate dengue from Zika infections

The Flaviviridae virus family was named after the Yellow-fever virus, and the latin term flavi means “of golden color”. Dengue, caused by Dengue virus (DENV), is one of the most important infectious diseases worldwide. A sensitive and differential diagnosis is crucial for patient management, especially due to the occurrence of serological cross-reactivity to other co-circulating flaviviruses. This became particularly important with the emergence of Zika virus (ZIKV) in areas were DENV seroprevalence was already high. We developed a sensitive and specific diagnostic test based on gold nanorods (GNR) functionalized with DENV proteins as nanosensors. These were able to detect as little as one picogram of anti-DENV monoclonal antibodies and highly diluted DENV-positive human sera. The nanosensors could differentiate DENV-positive sera from other flavivirus-infected patients, including ZIKV, and were even able to distinguish which DENV serotype infected individual patients. Readouts are obtained in ELISA-plate spectrophotometers without the need of specific devices.

Fabrication of Fe3O4/Au@ATP@Ag Nanorod sandwich structure for sensitive SERS quantitative detection of histamine

We have successfully prepared a highly sensitive sandwich nanosensor combined Fe₃O₄ and Au@ATP@Ag nanorods for histamine detection based on surface-enhanced Raman spectroscopy (SERS). The Fe₃O₄ beads with -COOH served as a capture part to enrich histamine. The Au@ATP@Ag core-shell nanorods functionalized with Nalpha,Nalpha-Bis(carboxymethyl)-l-lysine (AB-NTA) were then used to connect with the imidazolyl group of histamine, simultaneously the internal standard 4-aminothiophenol (4-ATP) in the core-shell structure was used as the SERS signal. PLS regression model based on concentration range 10^-3-10^-8mol/L showed a linear trend with R² = 0.9907. Our new approach can quickly and reliably determine histamine in fish sample and RAW264.7 cell lysates. This protocol for histamine extraction and SERS analysis enables the development of ultra-sensitive method for histamine detection.

Controlling the Morphologies of Silver Aggregates by Laser-Induced Synthesis for Optimal SERS Detection

Controlling the synthesis of metallic nanostructures for high quality surface-enhanced Raman scattering (SERS) materials has long been a central task of nanoscience and nanotechnology. In this work, silver aggregates with different surface morphologies were controllably synthesized on a glass-solution interface via a facile laser-induced reduction method. By correlating the surface morphologies with their SERS abilities, optimal parameters (laser power and irradiation time) for SERS aggregates synthesis were obtained. Importantly, the characteristics for largest near-field enhancement were identified, which are closely packed nanorice and flake structures with abundant surface roughness. These can generate numerous hot spots with huge enhancement in nanogaps and rough surface. These results provide an understanding of the correlation between morphologies and SERS performance, and could be helpful for developing optimal and applicable SERS materials.

Bi-Ligand Modification of Nanoparticles: An Effective Tool for Surface-Enhanced Raman Spectrometry in Salinated Environments

Elimination of massive aggregation of nanoparticles in the sample of high ionic strength is a prerequisite for the sensitive analysis through a surface-enhanced Raman spectrometry (SERS). We present a system of silver colloid modification composed of two thiolated modifiers (3-mercaptopropionic acid and thiolated polyethylene glycol) both creating a strong Ag-S bond. At their optimal molar ratio, the polymer acts as a steric barrier preventing direct nanoparticle-nanoparticle interaction, while the low-molecular organic acid creates areas accessible for the analyte molecules. Thus, this approach is an excellent tool for sustaining both the colloidal stability and SERS sensitivity. The functionality of the system was demonstrated on the SERS analysis of myoglobin from a saline solution. The favorable creation of hot spots was achieved by laser-induced sintering.