Constructing a Z-scheme Heterojunction of Egg-Like Core@shell CdS@TiO₂ Photocatalyst via a Facile Reflux Method for Enhanced Photocatalytic Performance

Hybrid Composite of Sn(IV)-Porphyrin and Mesoporous Structure for Enhanced Visible Light Photocatalytic Degradation of Organic Dyes

Two hybrid composites (SnP@MCM-41 and SnP@SiO₂) were fabricated by chemical adsorption of (trans-dihydroxo)(5,10,15,20-tetraphenylporphyrinato)tin(IV) (SnP) on mesoporous structured Mobil Composition of Matter No. 41 (MCM-41) and SiO₂ nanoparticles. These materials were characterized by Fourier-transform infrared spectroscopy, ultraviolet-visible spectroscopy, fluorescence spectroscopy, transmission electron microscopy, and field-emission scanning electron microscopy techniques. The incorporation of SnP into MCM-41 and SiO₂ supports efficient photocatalytic degradation of the anionic erioglaucine, cationic rhodamine B, and neutral m-cresol purple dyes under visible light irradiation in an aqueous solution. The performances of degradation of these dyes by these photocatalysts under visible light irradiation varied from 87 to 95%. The pseudo-first-order degradation rate constant of organic dyes for SnP@MCM-41 was higher than those of SnP@SiO₂ and SnP. These visible light photocatalysts showed remarkable stability and reliable reusability.

Composite CdS/TiO2 Powders for the Selective Reduction of 4-Nitrobenzaldehyde by Visible Light: Relation between Preparation, Morphology and Photocatalytic Activity

A series of composite CdS/TiO2 powders was obtained by nucleation of TiO2 on CdS nanoseeds. This combination presents the appropriate band edge position for photocatalytic redox reactions: visible light irradiation of CdS allows the injection of electrons into dark TiO2, increasing the lifetimes of separated charges. The electrons have been used for the quantitative photoreduction of 4-nitrobenzaldehyde to 4-aminobenzaldehyde, whose formation was pointed out by 1H NMR and ESI-MS positive ion mode. Concomitant sacrificial oxidation of 2-propanol, which was also the proton source, occurred. The use of characterization techniques (XRD, N2 adsorption-desorption) evidenced the principal factors driving the photocatalytic reaction: the nanometric size of anatase crystalline domains, the presence of dispersed CdS to form an extended active junction CdS/anatase, and the presence of mesopores as nanoreactors. The result is an efficient photocatalytic system that uses visible light. In addition, the presence of TiO2 in combination with CdS improves the stability of the photoactive material, enabling its recyclability.

Sonocatalytic degradation of ciprofloxacin and organic pollutant by 1T/2H phase MoS2 in Polyvinylidene fluoride nanocomposite membrane

The development of recyclable catalysts with effective properties and stable reusability is great importance for the removal of different types of pollutants in wastewater. Herein, we have synthesized Polyvinylidene fluoride (PVDF) polymer and mixed-phase 1T/2H MoS₂ for immobilizing the sonocatalyst material. Techniques such as FESEM, XRD, FTIR, XPS, and UV-vis spectra have been used for analyzing the structural, and morphological properties. The formation of a 1T/2H mixed phase in MoS₂ has been revealed by XRD and XPS analysis. Consequently, the sonocatalytic performance of the nanocomposite membrane was investigated through ciprofloxacin (CIP) and organic pollutants (Rhodamine B (RhB)). As a result, MoS₂/PVDF (PM4) nanocomposite membrane exhibited a superior sonocatalytic activity with 94.37% and 84.37% of RhB and CIP degradation efficiency with pseudo-first-order kinetic constant (k) of 0.0187 min^-1, and 0.0044 min^-1. The sonocatalytic property of the nanocomposite membrane is related to 1T/2H mixed-phase and PVDF. Additionally, the metallic based 1T phase MoS₂ helps to promote electrons and holes and reduce the recombination rate. Moreover, it promotes the generation of more hydroxy radicals (^.OH), and superoxide radicals (∙O₂^-) play a significant role in sonocatalytic degradation of RhB pollutants. Thus, the improved sonocatalytic degradation of 1T/2H MoS₂/PVDF composite membrane exhibited its application in real-time wastewater treatment.

Crystal Design and Photoactivity of TiO2 Nanorod Template Decorated with Nanostructured Bi2S3 Visible Light Sensitizer

In this study, TiO₂-Bi₂S₃ composites with various morphologies were synthesized through hydrothermal vulcanization with sputtering deposited Bi₂O₃ sacrificial layer method on the TiO₂ nanorod templates. The morphologies of decorated Bi₂S₃ nanostructures on the TiO₂ nanorod templates are controlled by the duration of hydrothermal vulcanization treatment. The Bi₂S₃ crystals in lumpy filament, nanowire, and nanorod feature were decorated on the TiO₂ nanorod template after 1, 3, and 5 h hydrothermal vulcanization, respectively. Comparatively, TiO₂-Bi₂S₃ composites with Bi₂S₃ nanowires exhibit the best photocurrent density, the lowest interfacial resistance value and the highest photodegradation efficiency towards Rhodamine B solution. The possible Z-scheme photoinduced charge separation mechanism and suitable morphology of Bi₂S₃ nanowires might account for the high photoactivity of TiO₂ nanorod-Bi₂S₃ nanowire composites.

Photocatalytic Carbon Dioxide Conversion by Structurally and Materially Modified Titanium Dioxide Nanostructures

TiO₂ has aroused considerable attentions as a promising photocatalytic material for decades due to its superior material properties in several fields such as energy and environment. However, the main dilemmas are its wide bandgap (3–3.2 eV), that restricts the light absorption in limited light wavelength region, and the comparatively high charge carrier recombination rate of TiO₂, is a hurdle for efficient photocatalytic CO₂ conversion. To tackle these problems, lots of researches have been implemented relating to structural and material modification to improve their material, optical, and electrical properties for more efficient photocatalytic CO₂ conversion. Recent studies illustrate that crystal facet engineering could broaden the performance of the photocatalysts. As same as for nanostructures which have advantages such as improved light absorption, high surface area, directional charge transport, and efficient charge separation. Moreover, strategies such as doping, junction formation, and hydrogenation have resulted in a promoted photocatalytic performance. Such strategies can markedly change the electronic structure that lies behind the enhancement of the solar spectrum harnessing. In this review, we summarize the works that have been carried out for the enhancement of photocatalytic CO₂ conversion by material and structural modification of TiO₂ and TiO₂-based photocatalytic system. Moreover, we discuss several strategies for synthesis and design of TiO₂ photocatalysts for efficient CO₂ conversion by nanostructure, structure design of photocatalysts, and material modification.

Band alignment of ZnO-based nanorod arrays for enhanced visible light photocatalytic performance

A ternary semiconductor ZnO/MoS₂/Ag₂S nanorod array in an intimate core–shell structure was synthesized on glass substrates. The physicochemical properties and photocatalytical performance of the specimen were characterized and compared with single ZnO and binary ZnO/Ag₂S and ZnO/MoS₂ nanorod arrays. It is found that the coating layers depressed the band edge emission of the ZnO core, improved light absorption in the visible range, reduced charge transfer resistance, and increased photocatalytic activity. The ternary heterojunction nanorod array possessed full solar absorption with an efficiency of 52.88% for the degradation of methylene blue under visible light in 30 min. The efficiency was higher than other arrays and was 7.6 times that of the ZnO array. Theory analysis revealed that the coating layer brought different band alignment in the heterojunctions for efficient charge separation and conduction, which was beneficial for the photocatalytic performance.

The ternary ZnO/MoS₂/Ag₂S nanorod array in a core–shell structure brings different band alignments at the interfacial heterojunctions to achieve full solar absorption with efficient charge separation and conduction and photocatalytic performance.

Borosilicate glasses containing CdS/ZnS QDs: A heterostructured composite with enhanced degradation of IC dye under visible-light

The glass system SiO₂-B₂O₃-Na₂O₃-ZnO containing 2 wt% CdS and 1 wt% ZnS was synthesized by the conventional melt quench method. Glass transition temperature and crystallization temperature was determined from Differential thermal analysis (DTA) measurement to optimize heat-treatment. The amorphous structure of the glass was confirmed by the X-ray diffraction (XRD) measurement. Glasses were heat-treated by optimized heat-treatment schedule to grow CdS/ZnS QDs and crystalline phases of CdS and ZnS were confirmed by the XRD measurement. High-Resolution Transmission Electron Microscopy (HRTEM) was used to determine the size and shape of quantum dots (QDs) grown in the glass matrix. The optical band gap was calculated from the absorption spectra and found to decrease with increase in size of QDs. Electron-hole recombination rate was studied using a decay time and impedance analyzer. Prepared samples were tested as a photocatalyst under sunlight for the degradation of indigo carmine (IC) dye and photodegradation efficiency was found to be 73.6 % and 87.2 % for samples CZ1 and CZ4 respectively. No significant change is observed in degradation efficiency even for 4 cycles which confirms the stability of prepared glasses for dye degradation.

Photocatalytic Penicillin Degradation Performance and the Mechanism of the Fragmented TiO2 Modified by CdS Quantum Dots

In this study, a novel method was adopted to construct a CdS-TiO₂ heterostructure to degrade penicillin under sunlight. A potato extract was used during the synthesis process of CdS QDs as a stabilizer and a modifier. The CdS-TiO₂ composite with a heterostructure delivers high photocatalytic degradation efficiency. In detail, 0.6 mg/mL of CdS-TiO₂ can successfully decompose penicillin after 2 h, and 5‰ CdS-TiO₂ shows the optimal degradation efficiency with the degradation rate reaching 88%. Furthermore, the underlying mechanisms of the penicillin decomposition reaction were investigated by the EPR test and trapping experiment. It was found that the high photocatalytic degradation efficiency was attributed to the heterojunction of CdS-TiO₂, which successfully suppresses the recombination of the conduction band of CdS and the valence band of TiO₂. Moreover, it was confirmed that the reaction is the O₂-consuming process, and introducing O₂ can greatly accelerate the generation of a superoxide radical during the photocatalytic degradation process, which eventually improves the degradation of penicillin and shortens the degradation time. Finally, this work provides the possible penicillin degradation pathways, which will inspire the researchers to explore and design novel photocatalysts in the field of wastewater treatment in the future.

Copper sulfide nanostructures: easy synthesis, photocatalytic and doxorubicin anticancer drug delivery applications

Copper sulfide nanostructures with different morphologies were used as a photocatalyst and antitumor drug delivery.

Surfactants-assisted preparation of BiVO4 with novel morphologies via microwave method and CdS decoration for enhanced photocatalytic properties

The development of a highly efficient and rapid method for the accurate preparation of photocatalysts with novel morphologies is a hot research topic. The different morphologies of BiVO₄ was prepared using surfactants-assisted microwave method, and demonstrated irregular (no surfactant), octahedral (sodium dodecyl benzene sulfonate), olive-like (polyvinylpyrrolidone) and hollow structures (ethylenediaminetetraacetic acid), respectively. The BiVO₄-CdS were synthesized using the chemical-bath-deposition method with different morphologies of BiVO₄ as the substrates. The hollow structure of BiVO₄ displayed the highest photocatalytic performance. Moreover, the photodegradation rates of the hollow structure BiVO₄-CdS on tetracycline hydrochloride and ciprofloxacin were about 1.8 and 1.5 times higher than the corresponding BiVO₄, indicating that the Z-scheme heterojunction can improve the photogenerated electron pairs separation efficiency. Furthermore, the regulation mechanism of morphology and energy-band position, as produced using the surfactants, has also been thoroughly investigated in this work, which provides a novel insight into the efficient and rapid preparation of photocatalysts with special morphology and high performance.

Ag as Cocatalyst and Electron-Hole Medium in CeO2 QDs/Ag/Ag2Se Z-scheme Heterojunction Enhanced the Photo-Electrocatalytic Properties of the Photoelectrode

A recyclable photoelectrode with high degradation capability for organic pollutants is crucial for environmental protection and, in this work, a novel CeO₂ quantum dot (QDs)/Ag₂Se Z-scheme photoelectrode boasting increased visible light absorption and fast separation and transfer of photo-induced carriers is prepared and demonstrated. A higher voltage increases the photocurrent and 95.8% of tetracycline (TC) is degraded by 10% CeO₂ QDs/Ag₂Se in 75 minutes. The degradation rate is superior to that achieved by photocatalysis (92.3% of TC in 90 min) or electrocatalysis (27.7% of TC in 90 min). Oxygen vacancies on the CeO₂ QDs advance the separation and transfer of photogenerated carriers at the interfacial region. Free radical capture tests demonstrate that •O₂⁻, •OH, and h⁺ are the principal active substances and, by also considering the bandgaps of CeO₂ QDs and Ag₂Se, the photocatalytic mechanism of CeO₂ QDs/Ag₂Se abides by the Z-scheme rather than the traditional heterojunction scheme. A small amount of metallic Ag formed in the photocatalysis process can form a high-speed charge transfer nano channel, which can greatly inhibit the photogenerated carrier recombination, improve the photocatalytic performance, and help form a steady Z-scheme photocatalysis system. This study would lay a foundation for the design of a Z-scheme solar photocatalytic system.

Structural characterization of self-assembled chain like Fe-FeOx Core shell nanostructure

One of the big challenge of studying the core-shell iron nanostructures is to know the nature of oxide shell, i.e., whether it is γ-Fe₂O₃ (Maghemite), Fe₃O₄ (Magnetite), α-Fe₂O₃ (Hematite), or FeO (Wustite). By knowing the nature of iron oxide shell with zero valent iron core, one can determine the chemical or physical behavior of core-shell nanostructures. Fe core-shell nanochains (NCs) were prepared through the reduction of Fe³⁺ ions by sodium boro-hydride in aqueous solution at room atmosphere, and Fe NCs were further aged in water up to 240 min. XRD was used to study the structure of Fe NCs. Further analysis of core-shell nature of Fe NCs was done by TEM, results showed increase in thickness of oxide shell (from 2.5, 4, 6 to 10 nm) as water aging time increases (from 0 min, 120 min, 240 min to 360 min). The Raman spectroscopy was employed to study the oxide nature of Fe NCs. To further confirm the magnetite phase in Fe NCs, the Mössbauer spectroscopy was done on Fe NCs-0 and Fe NCs-6. Result shows the presence of magnetite in the sample before aging in water, and the sample after prolonged aging contains pure Hematite phase. It shows that prolonged water oxidation transforms the structure of shell of Fe NCs from mixture of Hematite and Magnetite in to pure hematite shell. The Magnetic properties of the Fe NCs were measured by VSM at 320 K. Because of high saturation magnetization (Ms) values, Fe NCs could be used as r₂ contrasts agents for magnetic resonance imaging (MRI) in near future.

TiO2 Based Nanostructures for Photocatalytic CO2 Conversion to Valuable Chemicals

Photocatalytic conversion of CO2 to useful products is an alluring approach for acquiring the two-fold benefits of normalizing excess atmospheric CO2 levels and the production of solar chemicals/fuels. Therefore, photocatalytic materials are continuously being developed with enhanced performance in accordance with their respective domains. In recent years, nanostructured photocatalysts such as one dimensional (1-D), two dimensional (2-D) and three dimensional (3-D)/hierarchical have been a subject of great importance because of their explicit advantages over 0-D photocatalysts, including high surface areas, effective charge separation, directional charge transport, and light trapping/scattering effects. Furthermore, the strategy of doping (metals and non-metals), as well as coupling with a secondary material (noble metals, another semiconductor material, graphene, etc.), of nanostructured photocatalysts has resulted in an amplified photocatalytic performance. In the present review article, various titanium dioxide (TiO2)-based nanostructured photocatalysts are briefly overviewed with respect to their application in photocatalytic CO2 conversion to value-added chemicals. This review primarily focuses on the latest developments in TiO2-based nanostructures, specifically 1-D (TiO2 nanotubes, nanorods, nanowires, nanobelts etc.) and 2-D (TiO2 nanosheets, nanolayers), and the reaction conditions and analysis of key parameters and their role in the up-grading and augmentation of photocatalytic performance. Moreover, TiO2-based 3-D and/or hierarchical nanostructures for CO2 conversions are also briefly scrutinized, as they exhibit excellent performance based on the special nanostructure framework, and can be an exemplary photocatalyst architecture demonstrating an admirable performance in the near future.

A Ternary Magnetic Recyclable ZnO/Fe3O4/g-C3N4 Composite Photocatalyst for Efficient Photodegradation of Monoazo Dye

To develop a highly efficient visible light-induced and conveniently recyclable photocatalyst, in this study, a ternary magnetic ZnO/Fe₃O₄/g-C₃N₄ composite photocatalyst was synthesized for the photodegradation of Monas dye. The structure and optical performance of the composite photocatalyst were characterized using X-ray diffraction (XRD), transmission electron microscopye (TEM), energy dispersive spectroscopy (EDS), photoluminescence (PL) spectra, ultraviolet-visible diffuse reflection, and photo-electrochemistry. The photocatalytic activities of the prepared ZnO/Fe₃O₄/g-C₃N₄ nanocomposites were notably improved, and they were significantly higher than those of pure g-C₃N₄ and ZnO. Given the presence of the heterojunction between the interfaces of g-C₃N₄ and ZnO, the higher response to visible light and separation efficiency of the photo-induced electrons and holes enhanced the photocatalytic activities of the ZnO/Fe₃O₄/g-C₃N₄ nanocomposites. The stability experiment revealed that ZnO/Fe₃O₄/g-C₃N₄-50% demonstrates a relatively higher photocatalytic activity after 5 recycles. The degradation efficiency of MO, AYR, and OG over ZnO/Fe₃O₄/g-C₃N₄-50% were 97.87%, 98.05%, and 83.35%, respectively, which was due to the number of dye molecules adsorbed on the photocatalyst and the structure of the azo dye molecule. Azo dyes could be effectively and rapidly photodegraded by the obtained photocatalyst. Therefore, the environment-friendly photocatalyst could be widely applied to the treatment of dye contaminated wastewater.