Nanoparticle Deposition in Rhythmically Moving Acinar Models with Interalveolar Septal Apertures

Study on the flow mechanism and frequency characteristics of rales in lower respiratory tract

The frequency characteristics of lung sounds have great significance for noninvasive diagnosis of respiratory diseases. The rales in the lower respiratory tract region that can provide rich information about symptoms of respiratory diseases are not clear. In this paper, a three-dimensional idealized bifurcated lower respiratory tract geometric model, which contains 3rd to 13th generation (G3-G13) bronchi is constructed, where Re ∼ 10 1 - 10 3 , and then the large eddy simulation and volume of fluid are used to study the fluid flow characteristics. Ffowcs Williams and Hawkings model are subsequently used to study the frequency characteristics of rale of different generations of bronchi. The results showed that bronchial blockage and sputum movement will enhance the turbulence intensity and vortex shedding intensity of flow. The dominant frequency and highest value of sound pressure level (SPL) of rhonchi/moist crackles decrease with the increase of bronchial generation. The change rates of dominant frequency of rhonchi / moist crackles in adjacent generations were 5.0 ± 0.1 ~ 9.1 ± 0.2% and 3.1 ± 0.1 ~ 11.9 ± 0.3%, respectively, which is concentrated in 290 ~ 420 Hz and 200 ~ 300 Hz, respectively. The change rates of SPL of rhonchi/moist crackles were 8.8 ± 0.1 ~ 15.7 ± 0.1% and 7.1 ± 0.1 ~ 19.5 ± 0.2%, respectively, which is concentrated in 28 ~ 50 dB and 16 ~ 32 dB, respectively. In the same generation of bronchus (e.g., G8, G9) with the same degree of initial blockage, the dominant frequency and SPL of moist crackles can be 3.7 ± 0.2% and 4.5 ± 0.3% slightly higher than that of rhonchi, respectively. This research is conducive to the establishment of a rapid and accurate noninvasive diagnosis system for respiratory diseases.

Delivery of Agarose-aided Sprays to the Posterior Nose for Mucosa Immunization and Short-term Protection against Infectious Respiratory Diseases

AIM

The study aimed to deliver sprays to the posterior nose for mucosa immunization or short-term protection.

BACKGROUND

Respiratory infectious diseases often enter the human body through the nose. Sars- Cov-2 virus preferentially binds to the ACE2-rich tissue cells in the Nasopharynx (NP). Delivering medications to the nose, especially to the NP region, provides either a short-term protective/ therapeutic layer or long-term mucosa immunization. Hydrogel-aided medications can assist film formation, prolong film life, and control drug release. However, conventional nasal sprays have failed to dispense mediations to the posterior nose, with most sprays lost in the nasal valve and front turbinate.

OBJECTIVE

The objective of the study was to develop a practical delivery system targeting the posterior nose and quantify the dosimetry distribution of agarose-saline solutions in the nasal cavity.

METHODS

The solution viscosities with various hydrogel concentrations (0.1-1%) were measured at different temperatures. Dripping tests on a vertical plate were conducted to understand the hydrogel concentration effects on the liquid film stability and mobility. Transparent nasal airway models were used to visualize the nasal spray deposition and liquid film translocation.

RESULTS

Spray dosimetry with different hydrogel concentrations and inhalation flow rates was quantified on a total and regional basis. The solution viscosity increased with decreasing temperature, particularly in the range of 60-40oC. The liquid viscosity, nasal spray atomization, and liquid film mobility were highly sensitive to the hydrogel concentration. Liquid film translocations significantly enhanced delivered doses to the caudal turbinate and nasopharynx when the sprays were administered at 60oC under an inhalation flow rate of 11 L/min with hydrogel concentrations no more than 0.5%. On the other hand, sprays with 1% hydrogel or administered at 40oC would significantly compromise the delivered doses to the posterior nose.

CONCLUSION

Delivering sufficient doses of hydrogel sprays to the posterior nose is feasible by leveraging the post-administration liquid film translocation.

Pulmonary Oxygen Exchange in a Rhythmically Expanding–Contracting Alveolus–Capillary Model

Pulmonary gas exchanges are vital to human health, and disruptions to this process have been associated with many respiratory diseases. Previous gas exchange studies have predominately relied on whole-body testing and theoretical analysis with 1D or static models. However, pulmonary gas exchanges are inherently a dynamic process in 3D spaces with instantaneous interactions between air, blood, and tissue. This study aimed to develop a computational model for oxygen exchange that considered all factors mentioned above. Therefore, an integrated alveolus–membrane–capillary geometry was developed with prescribed rhythmic expansion/contraction. Airflow ventilation, blood perfusion, and oxygen diffusion were simulated using COMSOL. The temporal and spatial distribution of blood flow and oxygen within the capillaries were simulated under varying breathing depths and cardiac outputs. The results showed highly nonuniform blood flow distributions in the capillary network, while the rhythmic oscillation further increased this nonuniformity, leading to stagnant blood flow in the distal vessels. A static alveolus–capillary geometry underestimated perfusion by 11% for normal respirations, and the deviation grew with breathing depth. The rhythmic motion caused a phase lag in the blood flow. The blood PO2 reached equilibrium with the alveolar air after traveling 1/5–1/3 of the capillary network. The time to reach this equilibrium was significantly influenced by the air–blood barrier diffusivity, while it was only slightly affected by the perfusion rate. The computational platform in this study could be instrumental in obtaining refined knowledge of pulmonary O2 exchanges.

Surface tension effects on flow dynamics and alveolar mechanics in the acinar region of human lung

Background

Computational fluid dynamics (CFD) simulations, in-vitro setups, and experimental ex-vivo approaches have been applied to numerous alveolar geometries over the past years. They aimed to study and examine airflow patterns, particle transport, particle propagation depth, particle residence times, and particle-alveolar wall deposition fractions. These studies are imperative to both pharmaceutical and toxicological studies, especially nowadays with the escalation of the menacing COVID-19 virus. However, most of these studies ignored the surfactant layer that covers the alveoli and the effect of the air-surfactant surface tension on flow dynamics and air-alveolar surface mechanics.

Methods

The present study employs a realistic human breathing profile of 4.75s for one complete breathing cycle to emphasize the importance of the surfactant layer by numerically comparing airflow phenomena between a surfactant-enriched and surfactant-deficient model. The acinar model exhibits physiologically accurate alveolar and duct dimensions extending from lung generations 18 to 23. Airflow patterns in the surfactant-enriched model support previous findings that the recirculation of the flow is affected by its propagation depth. Proximal lung generations experience dominant recirculating flow while farther generations in the distal alveolar region exhibit dominant radial flows. In the surfactant-enriched model, surface tension values alternate during inhalation and exhalation, with values increasing to 25 mN/m at the inhalation and decreasing to 1 mN/m at the end of the exhalation. In the surfactant-deficient model, only water coats the alveolar walls with a high surface tension value of 70 mN/m.

Results

Results showed that surfactant deficiency in the alveoli adversely alters airflow behavior and generates unsteady chaotic breathing through the production of vorticities, accompanied by higher vorticity magnitudes (100% increase at the end of exhalation) and higher velocity magnitudes (8.69% increase during inhalation and 11.9% increase during exhalation). In addition, high air-water surface tension in the surfactant-deficient case was found to induce higher shear stress values (by around a factor of 10) on the alveolar walls than that of the surfactant-enriched case.

Conclusion

Overall, it was concluded that the presence of the surfactant improves respiratory mechanics and allows for smooth breathing and normal respiration.

Nanoparticle-Based Inhalation Therapy for Pulmonary Diseases

The lung is exposed to various pollutants and is the primary site for the onset of various diseases, including infections, allergies, and cancers. One possible treatment approach for such pulmonary diseases involves direct administration of therapeutics to the lung so as to maintain the topical concentration of the drug. Particles with nanoscale diameters tend to reach the pulmonary region. Nanoparticles (NPs) have garnered significant interest for applications in biomedical and pharmaceutical industries because of their unique physicochemical properties and biological activities. In this article, we describe the biological and pharmacological activities of NPs as well as summarize their potential in the formulation of drugs employed to treat pulmonary diseases. Recent advances in the use of NPs in inhalation chemotherapy for the treatment of lung diseases have also been highlighted.

Effects of airway deformation and alveolar pores on particle deposition in the lungs

The distal lung (G14-G23), which are composed of alveoli and bronchi, are responsible for almost all gas exchange and micro- and nanoparticle deposition in the lungs. In the existing research using computational fluid dynamics, the geometric modeling accuracy of the bronchial bifurcation structure is given priority, and then the alveoli are attached to bronchi as discrete spherical crowns. This method ignores the correlation between alveoli. In fact, the alveoli have a tessellated distribution, and adjacent alveoli are connected by several alveolar pores. Due to the huge number of alveoli, this seemingly small difference will be greatly amplified, which may lead to a large deviation in the prediction of the overall flow. Accordingly, the objective of this study is to construct a two-dimensional distal lung model including the bronchi, acini, and alveolar pores by using the methods of regular hexagonal tessellational subdivision, fusion, and coordinate transformation. A moving boundary is introduced to simulate the process of airflow and particle deposition in the distal lung, and the effects of bronchial deformation, respiratory frequency, and alveolar pores are obtained. The results show that there are significant differences in intrapulmonary flow patterns with and without alveolar pores. Alveolar pores can establish bypass ventilation downstream of a blockage, thus providing a pathway for particles to enter the airways downstream of the blockage. Changing the respiratory frequency and the amplitude of bronchial deformation will change the relative velocity between particles and moving wall, which, in turn, will change the particle deposition efficiency in the distal lung. To summarize this study, a geometric modeling method for the distal lung with alveolar pores is established, and the important roles of detailed characteristics of the distal lung are revealed. The findings of this study provide a reasonable hydrodynamic mechanism for the prevention of related respiratory diseases.

Microparticle Transport and Sedimentation in a Rhythmically Expanding Alveolar Chip

Understanding the mechanism of particle transport and sedimentation in pulmonary alveolus is important for deciphering the causes of respiratory diseases and helping the development of drug delivery. In this study, taking advantage of the microfluidic technique, an experimental platform was developed to study particle behavior in a rhythmically expanding alveolar chip for a sufficient number of cycles. The alveolar flow patterns at different generations were measured for two cases with the gravity direction parallel or vertical to the alveolar duct. Affected by both the vortex flow inside the alveoli and the shear flow in the duct simultaneously, it was observed that particles inside the alveoli either escaped from the inlet of the alveolar duct or stayed in the alveoli, revealing the irreversibility of particle transport in the alveoli. At the earlier acinar generations, particles were inclined to deposit on the distal alveolar wall. The settling rates of particles of different sizes in the alveoli were also compared. This study provides valuable data for understanding particle transport and sedimentation in the alveoli.

Associations between lung-deposited dose of particulate matter and culture-positive pulmonary tuberculosis pleurisy

Epidemiological studies identified the relationship between air pollution and pulmonary tuberculosis. Effects of lung-deposited dose of particulate matter (PM) on culture-positive pulmonary tuberculosis remain unclear. This study investigates the association between lung-deposited dose of PM and pulmonary tuberculosis pleurisy. A case-control study of subjects undergoing pleural effusion drainage of pulmonary tuberculosis (case) and chronic heart failure (control) was conducted. Metals and biomarkers were quantified in the pleural effusion. The air pollution exposure was measured and PM deposition in the head, tracheobronchial, alveolar region, and total lung region was estimated by Multiple-path Particle Dosimetry (MPPD) Model. We performed multiple logistic regression to examine the associations of these factors with the risk of tuberculosis. We observed that 1-μg/m³ increase in PM₁₀ was associated with 1.226-fold increased crude odds ratio (OR) of tuberculosis (95% confidence interval (CI): 1.023-1.469, p<0.05), 1-μg/m³ increase in PM_2.5-10 was associated with 1.482-fold increased crude OR of tuberculosis (95% CI: 1.048-2.097, p < 0.05), 1-ppb increase in NO₂ was associated with 1.218-fold increased crude OR of tuberculosis (95% CI: 1.025-1.447, p < 0.05), and 1-ppb increase in O₃ was associated with 0.735-fold decreased crude OR of tuberculosis (95% CI: 0.542 0.995). We observed 1-μg/m³ increase in PM deposition in head and nasal region was associated with 1.699-fold increased crude OR of tuberculosis (95% CI: 1.065-2.711, p < 0.05), 1-μg/m³ increase in PM deposition in tracheobronchial region was associated with 1.592-fold increased crude OR of tuberculosis (95% CI: 1.095-2.313, p < 0.05), 1-μg/m³ increase in PM deposition in alveolar region was associated with 3.981-fold increased crude OR of tuberculosis (95% CI: 1.280-12.386, p < 0.05), and 1-μg/m³ increase in PM deposition in total lung was associated with 1.511-fold increased crude OR of tuberculosis (95% CI: 1.050-2.173, p < 0.05). The results indicate that particle deposition in alveolar region could cause higher risk of pulmonary tuberculosis pleurisy than deposition in other lung regions.

Investigation on Microparticle Transport and Deposition Mechanics in Rhythmically Expanding Alveolar Chip

The transport and deposition of micro/nanoparticles in the lungs under respiration has an important impact on human health. Here, we presented a real-scale alveolar chip with movable alveolar walls based on the microfluidics to experimentally study particle transport in human lung alveoli under rhythmical respiratory. A new method of mixing particles in aqueous solution, instead of air, was proposed for visualization of particle transport in the alveoli. Our novel design can track the particle trajectories under different force conditions for multiple periods. The method proposed in this study gives us better resolution and clearer images without losing any details when mapping the particle velocities. More detailed particle trajectories under multiple forces with different directions in an alveolus are presented. The effects of flow patterns, drag force, gravity and gravity directions are evaluated. By tracing the particle trajectories in the alveoli, we find that the drag force contributes to the reversible motion of particles. However, compared to drag force, the gravity is the decisive factor for particle deposition in the alveoli.

Septal destruction enhances chaotic mixing and increases cellular doses of nanoparticles in emphysematous acinus

One hallmark of emphysema is the breakdown of inter-alveolar septal walls in pulmonary acini. How the acinar dosimetry of environmental aerosols varies at different stages of emphysema remains unclear; this is specifically pertinent to users of tobacco products, which is the leading cause of emphysema. The objective of this study is to systematically assess the impacts of septal destruction on the behavior and fate of nanoparticles (1–800 nm) in a pyramid-shaped sub-acinar model consisting of 496 alveoli. Four diseased geometry variants were created by gradually removing the septal walls from the base model. Particle motions within the acinar region were tracked for particles raging 1–800 nm at four emphysema stages using a well-tested Lagrangian tracking model. Both spatial profile and temporal variation of particle deposition were predicted in healthy and diseased sub-acinar geometries on both a total and regional basis. Results show large differences in airflow and particle dynamics among different emphysema stages. Large differences in particle dynamics are also observed among different particle sizes, with one order of magnitude’s variation in the speeds of particles of 1, 10, and 200 nm. The destruction of septal walls also changed the deposition mechanisms, shifting from connective diffusion to chaotic mixing with emphysema progression. The sub-acinar dosimetry became less sensitive to particle size variation with more septal destructions. The lowest retention rate was found at 200–500 nm in the healthy sub-acinar geometry, but at 800 nm in all emphysematous models considered. The acinus-averaged dose for nanoparticles (1–800 nm) increases with aggravating septal destructions, indicating an even higher risk to the acinus at later emphysema stages.

Hybrid Agent-Based Modeling of Aspergillus fumigatus Infection to Quantitatively Investigate the Role of Pores of Kohn in Human Alveoli

The healthy state of an organism is constantly threatened by external cues. Due to the daily inhalation of hundreds of particles and pathogens, the immune system needs to constantly accomplish the task of pathogen clearance in order to maintain this healthy state. However, infection dynamics are highly influenced by the peculiar anatomy of the human lung. Lung alveoli that are packed in alveolar sacs are interconnected by so called Pores of Kohn. Mainly due to the lack of in vivo methods, the role of Pores of Kohn in the mammalian lung is still under debate and partly contradicting hypotheses remain to be investigated. Although it was shown by electron microscopy that Pores of Kohn may serve as passageways for immune cells, their impact on the infection dynamics in the lung is still unknown under in vivo conditions. In the present study, we apply a hybrid agent-based infection model to quantitatively compare three different scenarios and discuss the importance of Pores of Kohn during infections of Aspergillus fumigatus. A. fumigatus is an airborne opportunistic fungus with rising incidences causing severe infections in immunocompromised patients that are associated with high mortality rates. Our hybrid agent-based model incorporates immune cell dynamics of alveolar macrophages – the resident phagocytes in the lung – as well as molecular dynamics of diffusing chemokines that attract alveolar macrophages to the site of infection. Consequently, this model allows a quantitative comparison of three different scenarios and to study the importance of Pores of Kohn. This enables us to demonstrate how passaging of alveolar macrophages and chemokine diffusion affect A. fumigatus infection dynamics. We show that Pores of Kohn alter important infection clearance mechanisms, such as the spatial distribution of macrophages and the effect of chemokine signaling. However, despite these differences, a lack of passageways for alveolar macrophages does impede infection clearance only to a minor extend. Furthermore, we quantify the importance of recruited macrophages in comparison to resident macrophages.

Alveolar size effects on nanoparticle deposition in rhythmically expanding-contracting terminal alveolar models

Significant differences in alveolar size exist in humans of different ages, gender, health, and among different species. The effects of alveolar sizes, as well as the accompanying breathing frequencies, on regional and local dosimetry of inhaled nanoparticles have not been sufficiently studied. Despite a well-accepted qualitative understanding of the advection-diffusion-sedimentation mechanism in the acinar region, a quantitative picture of the interactions among these factors remains inchoate. The objective of this study is to quantify the effects of alveolar size on the regional and local deposition of inhaled nanoparticles in alveolar models of varying complexities and to understand the dynamic interactions among different deposition mechanisms. Three different models were considered that retained 1, 4, and 45 alveoli, respectively. For each model, the baseline geometry was scaled by ¼, ½, 2, 4, and 8 times by volume. Temporal evolution and spatial distribution of particle deposition were tracked using a discrete-phase Lagrangian model. Lower retentions of inhaled nanoparticles were observed in the larger alveoli under the same respiration frequency, while similar retentions were found among different geometrical scales if breathing frequencies allometrically matched the alveolar size. Dimensional analysis reveals a manifold deposition mechanism with tantamount contributions from advection, diffusion, and gravitational sedimentation, each of which can become dominant depending on the location in the alveoli. Results of this study indicate that empirical correlations obtained from one sub-population cannot be directly applied to others, nor can they be simply scaled as a function of the alveolar size or respiration frequency due to the regime-transiting deposition mechanism that is both localized and dynamic.

Ventilation Modulation and Nanoparticle Deposition in Respiratory and Olfactory Regions of Rabbit Nose

The rabbit nose's ability to filter out inhaled agents is directly related to its defense to infectious diseases. The knowledge of the rabbit nose anatomy is essential to appreciate its functions in ventilation regulation, aerosol filtration and olfaction. The objective of this study is to numerically simulate the inhalation and deposition of nanoparticles in a New Zealand white (NZW) rabbit nose model with an emphasis on the structure-function relation under normal and sniffing conditions. To simulate the sniffing scenario, the original nose model was modified to generate new models with enlarged nostrils or vestibules based on video images of a rabbit sniffing. Ventilations into the maxilloturbinate and olfactory region were quantified with varying nostril openings, and deposition rates of inhaled aerosols ranging from 0.5 nm to 1000 nm were characterized on the total, sub-regional and local basis. Results showed that particles which deposited in the olfactory region came from a specific area in the nostril. The spiral vestibule played an essential role in regulating flow resistance and flow partition into different parts of the nose. Increased olfactory doses were persistently predicted in models with expanded nostrils or vestibule. Particles in the range of 5-50 nm are more sensitive to the geometry variation than other nanoparticles. It was also observed that exhaled aerosols occupy only the central region of the nostril, which minimized the mixing with the aerosols close to the nostril wall, and potentially allowed the undisruptive sampling of odorants. The results of this study shed new light on the ventilation regulation and inhalation dosimetry in the rabbit nose, which can be further implemented to studies of infectious diseases and immunology in rabbits.