Smart Bandage Based on Molecularly Imprinted Polymers (MIPs) for Diclofenac Controlled Release

A novel green molecularly imprinted polymers synthesized in an aqueous medium as S-metolachlor sensitive materials

A new molecularly imprinted polymer (MIP) sensitive and selective for S-metolachlor herbicide was synthesized by bulk polymerization with the use of N-isopropylacrylamide, acrylamide, and acrylic acid as functional monomers, and N,N'- methylenebis(acrylamide) as a cross-linker. A novel method for obtaining MIP toward S-metolachlor in an aqueous medium and at room temperature, according to the principles of green chemistry, has been discovered, in comparison to synthesis methods at high temperatures and using organic solvents. Under selected experimental conditions, the batch mode type of sorption was carried out efficiently, with S-metolachlor absorption of 2.4 mg per 1 g of MIP and 0.5 mg per 1 g of NIP. The selectivity of the sorbent towards other herbicides and pesticides was also tested, obtaining an ability to recognize S-metolachlor molecules 3.2 times better than atrazine, 6 times better than glyphosate, and 6.2 times better than fenoxaprop-P-ethyl. The FT-IR and SEM analyses were performed to characterize the structure of the synthesized polymers.

Enhanced Antibacterial Activity of Clindamycin Using Molecularly Imprinted Polymer Nanoparticles Loaded with Polyurethane Nanofibrous Scaffolds for the Treatment of Acne Vulgaris

Acne vulgaris, a prevalent skin condition, arises from an imbalance in skin flora, fostering bacterial overgrowth. Addressing this issue, clindamycin molecularly imprinted polymeric nanoparticles (Clin-MIP) loaded onto polyurethane nanofiber scaffolds were developed for acne treatment. Clin-MIP was synthesized via precipitation polymerization using methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA), and azoisobutyronitrile (AIBN) as functional monomers, crosslinkers, and free-radical initiators, respectively. MIP characterization utilized Fourier-transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM) before being incorporated into polyurethane nanofibers through electrospinning. Further analysis involved FTIR, scanning electron microscopy (SEM), in vitro release studies, and an ex vivo study. Clin-MIP showed strong antibacterial activity against S. aureus, with inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values of 0.39 and 6.25 μg/mL, respectively. It significantly dropped the bacterial count from 1 × 108 to 39 × 101 CFU/mL in vivo and has bactericidal activity within 180 min of incubation in vitro. The pharmacodynamic and histopathology studies revealed a significant decrease in infected animal skin inflammation, epidermal hypertrophy, and congestion upon treatment with Clin-MIP polyurethane nanofiber and reduced pro-inflammatory cytokines (NLRP3, TNF-α, IL-1β, and IL-6) conducive to acne healing. Consequently, the recently created Clin-MIP polyurethane nanofibrous scaffold. This innovative approach offers insight into creating materials with several uses for treating infectious wounds caused by acne.

3D-Printed Alginate/Pectin-Based Patches Loaded with Olive Leaf Extracts for Wound Healing Applications: Development, Characterization and In Vitro Evaluation of Biological Properties

Traditional wound dressings may lack suitability for diverse wound types and individual patient requirements. In this context, this study aimed to innovate wound care by developing a 3D-printed patch using alginate and pectin and incorporating Olive Leaf Extract (OLE) as an active ingredient. Different polymer-to-plasticizer ratios were systematically examined to formulate a printable ink with optimal viscosity. The resultant film, enriched with OLE, exhibited a substantial polyphenolic content of 13.15 ± 0.41 mg CAE/g, showcasing significant antioxidant and anti-inflammatory properties. Notably, the film demonstrated potent scavenging abilities against DPPH, ABTS, and NO radicals, with IC50 values of 0.66 ± 0.07, 0.47 ± 0.04, and 2.02 ± 0.14 mg/mL, respectively. In vitro release and diffusion studies were carried out and the release profiles revealed an almost complete release of polyphenols from the patch within 48 h. Additionally, the fabricated film exhibited the capacity to enhance cell motility and accelerate wound healing, evidenced by increased collagen I expression in BJ fibroblast cells. Structural assessments affirmed the ability of the patch to absorb exudates and maintain the optimal moisture balance, while biocompatibility studies underscored its suitability for biomedical applications. These compelling findings endorse the potential application of the developed film in advanced wound care, with the prospect of tailoring patches to individual patient needs.

In vivo application of magnetic molecularly imprinted polymer in rheumatoid arthritis rat model

A magnetic molecularly imprinted polymer (MMIP) was synthesised and tested for an in vivo rheumatoid arthritis (RA) rat model. Magnetite coated with mesoporous silica (Fe2O3@mSi) was used as core for surface imprinting, dopamine was used as monomer and methotrexate (MTX) was loaded directly during polymerisation. The amount of MTX loaded on MMIPs reached 201.165 ± 0.315 µmol/g. Characterisation of the polymers was done via SEM, TEM, and FTIR. The pharmacological effect of the selected MMIP was evaluated in a Complete Freund's Adjuvant (CFA) induced arthritis rat model where a 3D magnet bearing construct was designed for targeted delivery of MMIPs. The parameters evaluated were the change in paw edoema, paw diameter, gait score, and animal's weight. Results revealed a tendency of MMIP to significantly improve the measured parameters which was confirmed with histopathological findings. In conclusion, the improvement in the arthritic signs associated with MMIP treatment compared to free MTX, indicated successful targeting of MMIPs to the site of inflammation.

Promising advances in nanobiotic-based formulations for drug specific targeting against multidrug-resistant microbes and biofilm-associated infections

Antimicrobial agents and alternative strategies to combat bacterial infections have become urgent due to the rapid development of multidrug-resistant bacteria caused by the misuse and overuse of antibiotics, as well as the ineffectiveness of antibiotics against difficult-to-treat infectious diseases. Nanobiotics is one of the strategies being explored to counter the increase in antibiotic-resistant bacteria. Nanobiotics are antibiotic molecules encapsulated in nanoparticles or artificially engineered pure antibiotics that are ≤ 100 nm in size in at least one dimension. Formulation scientists recognize nanobiotic delivery systems as an effective strategy to overcome the limitations associated with conventional antibiotic therapy. This review highlights the general mechanisms by which nanobiotics can be used to target resistant microbes and biofilm-associated infections. We focus on the design elements, properties, characterization, and toxicity assessment of organic nanoparticles, inorganic nanoparticle and molecularly imprinted polymer-based nano-formulations that can be designed to improve the efficacy of nanobiotic formulation.

Recent Advances in Intelligent Wearable Medical Devices Integrating Biosensing and Drug Delivery

The primary roles of precision medicine are to perform real-time examination, administer on-demand medication, and apply instruments continuously. However, most current therapeutic systems implement these processes separately, leading to treatment interruption and limited recovery in patients. Personalized healthcare and smart medical treatment have greatly promoted research on and development of biosensing and drug-delivery integrated systems, with intelligent wearable medical devices (IWMDs) as typical systems, which have received increasing attention because of their non-invasive and customizable nature. Here, the latest progress in research on IWMDs is reviewed, including their mechanisms of integrating biosensing and on-demand drug delivery. The current challenges and future development directions of IWMDs are also discussed.

Molecularly imprinted polymers: preparation, characterisation, and application in drug delivery systems

Molecular imprinting technology defines the creation of molecularly imprinted polymer (MIP) molecules in which template molecules can place in a key-lock relationship through shape, diameter, and functional groups. Although molecular imprinting technology has been employed in different fields, its applications in drug delivery systems (DDSs) have gained momentum recently. The high loading efficiency, high stability, and controlled drug release are the primary advantages of MIPs. Here, the main components, preparation methods, and characterisation tests of MIPs are summarised, and their applications in DDSs administered by different routes are evaluated in detail. The review offers a perspective on molecular imprinting technology and applications of MIPs in drug delivery by surveying the literature approximately 1998-2021 together with the outlined prospects.

Molecularly Imprinted Polymers as State-of-the-Art Drug Carriers in Hydrogel Transdermal Drug Delivery Applications

Molecularly Imprinted Polymers (MIPs) are polymeric networks capable of recognizing determined analytes. Among other methods, non-covalent imprinting has become the most popular synthesis strategy for Molecular Imprinting Technology (MIT). While MIPs are widely used in various scientific fields, one of their most challenging applications lies within pharmaceutical chemistry, namely in therapeutics or various medical therapies. Many studies focus on using hydrogel MIPs in transdermal drug delivery, as the most valuable feature of hydrogels in their application in drug delivery systems that allow controlled diffusion and amplification of the microscopic events. Hydrogels have many advantages over other imprinting materials, such as milder synthesis conditions at lower temperatures or the increase in the availability of biological templates like DNA, protein, and nucleic acid. Moreover, one of the most desirable controlled drug delivery applications is the development of stimuli-responsive hydrogels that can modulate the release in response to changes in pH, temperature, ionic strength, or others. The most important feature of these systems is that they can be designed to operate within a particular human body area due to the possibility of adapting to well-known environmental conditions. Therefore, molecularly imprinted hydrogels play an important role in the development of modern drug delivery systems.

Smart Coatings Prepared via MAPLE Deposition of Polymer Nanocapsules for Light-Induced Release

Herein, smart coatings based on photo-responsive polymer nanocapsules (NC) and deposited by laser evaporation are presented. These systems combine remotely controllable release and high encapsulation efficiency of nanoparticles with the easy handling and safety of macroscopic substrates. In particular, azobenzene-based NC loaded with active molecules (thyme oil and coumarin 6) were deposited through Matrix-Assisted Pulsed Laser Evaporation (MAPLE) on flat inorganic (KBr) and organic (polyethylene, PE) and 3D (acrylate-based micro-needle array) substrates. SEM analyses highlighted the versatility and performance of MAPLE in the fabrication of the designed smart coatings. DLS analyses, performed on both MAPLE- and drop casting-deposited NC, demonstrated the remarkable adhesion achieved with MAPLE. Finally, thyme oil and coumarin 6 release experiments further demonstrated that MAPLE is a promising technique for the realization of photo-responsive coatings on various substrates.

Molecularly Imprinted Polymers (MIPs) as Theranostic Systems for Sunitinib Controlled Release and Self-Monitoring in Cancer Therapy

Cytotoxic agents that are used conventionally in cancer therapy present limitations that affect their efficacy and safety profile, leading to serious adverse effects. In the aim to overcome these drawbacks, different approaches have been investigated and, among them, theranostics is attracting interest. This new field of medicine combines diagnosis with targeted therapy; therefore, the aim of this study was the preparation and characterization of Molecularly Imprinted Polymers (MIPs) selective for the anticancer drug Sunitinib (SUT) for the development of a novel theranostic system that is able to integrate the drug controlled release ability of MIPs with Rhodamine 6G as a fluorescent marker. MIPs were synthesized by precipitation polymerization and then functionalized with Rhodamine 6G by radical grafting. The obtained polymeric particles were characterized in terms of particles size and distribution, ξ-potential and fluorescent, and hydrophilic properties. Moreover, adsorption isotherms and kinetics and in vitro release properties were also investigated. The obtained binding data confirmed the selective recognition properties of MIP, revealing that SUT adsorption better fitted the Langmuir model, while the adsorption process followed the pseudo-first order kinetic model. Finally, the in vitro release studies highlighted the SUT controlled release behavior of MIP, which was well fitted with the Ritger-Peppas kinetic model. Therefore, the synthesized fluorescent MIP represents a promising material for the development of a theranostic platform for Sunitinib controlled release and self-monitoring in cancer therapy.