Effect on Nail Structure and Transungual Permeability of the Ethanol and Poloxamer Ratio from Cyclodextrin-Soluble Polypseudorotaxanes Based Nail Lacquer

Formulation and Antimycotic Evaluation of Colloidal Itraconazole-Loaded Metered Dose Sprays for Treating Superficial Mycoses

Commercial topical formulations containing itraconazole (poorly water soluble), for mycotic infections, have poor penetration to infection sites beneath the nails and skin thereby necessitating oral administration. To improve penetration, colloidal solutions of itraconazole (G1-G4) containing Poloxamer 188, tween 80, ethanol, and propylene glycol were prepared and incorporated into HFA-134-containing sprays. Formulations were characterized using particle size, drug content, and Fourier-transform infrared spectroscopy (FTIR). In vitro permeation studies were performed using Franz diffusion cells for 8 h. Antimycotic activity on Candida albicans and Trichophyton rubrum was performed using broth micro-dilution and flow cytometry, while cytotoxicity was tested on HaCaT cell lines. Particle size ranged from 39.35-116.80 nm. FTIR and drug content revealed that G1 was the most stable formulation (optimized formulation). In vitro release over 2 h was 45% for G1 and 34% for the cream. There was a twofold increase in skin permeation, fivefold intradermal retention, and a sevenfold increase in nail penetration of G1 over the cream. Minimum fungicidal concentrations (MFC) against C. albicans were 0.156 and 0.313 µg/mL for G1 and cream, respectively. The formulations showed optimum killing kinetics after 48 h. MFC values against T. rubrum were 0.312 and 0.625 µg/mL for the G1 and cream, respectively. Transmission electron microscopy revealed organelle destruction and cell leakage for G1 in both organisms and penetration of keratin layers to destroy T. rubrum. Cytotoxicity evaluation of G1 showed relative safety for skin cells. The G1 formulation showed superior skin permeation, nail penetration, and fungicidal activity compared with the cream formulation.

New Formulation-Microporation Combination Approaches to Delivering Ciclopirox across Human Nails

Topical treatments for onychomycosis are of interest to those seeking to avoid systemic drug interactions and to improve systemic safety. This work aimed to develop aqueous-based, simple, and cost-effective vehicles that provide high solubility for ciclopirox and enable the delivery of an active through channels created by nail microporation. Following solubility tests, aqueous gels and thermogels based on hydroxypropylmethylcellulose and poloxamer 407, respectively, were loaded with 8% and 16% ciclopirox. Their performance was then compared to the marketed lacquer Micolamina® in in vitro release tests with artificial membranes and in in vitro permeation tests with human nail clippings with and without poration. Finally, a microbiological assay compared the best gel formulations and the reference product. Little correlation was observed between the in vitro release and the permeation data, and the drug release was highly membrane-dependent. Ciclopirox nail retention in single-dose, porated nails tests was larger than in daily-dosing, non-porated nail conditions. The series of new gel and thermogel vehicles delivered ciclopirox more effectively than Micolamina® in single-dose, porated nail experiments. The inhibition of Trichophyton rubrum activity was significantly increased with microporated nails when the gel formulations were applied but not with Micolamina®. Overall, the results suggest that the new vehicles could be successfully combined with nail microporation to improve the drug delivery and efficacy of topical antifungal medication while reducing the dosing frequency, facilitating patients' adherence.

Systematic review and QSPR analysis of chemical penetration through the nail to inform onychomycosis candidate selection

Recalcitrant nail plate infections can be life-long problems because localizing antifungal agents into infected tissues is problematic. In this systematic review, guided by the SPIDER method, we extracted chemical nail permeation data for 38 compounds from 16 articles, and analyzed the data using quantitative structure-property relationships (QSPRs). Our analysis demonstrated that low-molecular weight was essential for effective nail penetration, with <120 g/mol being preferred. Interestingly, chemical polarity had little effect on nail penetration; therefore, small polar molecules, which effectively penetrate the nail, but not the skin, should be set as the most desirable target chemical property in new post-screen onychomycosis candidate selections.

Treatment of nail clippings with ethyl alcohol improves the efficacy of Raman spectroscopy in the diagnosis of Trichophyton rubrum onychomycosis

The purpose of this work was to enhance the diagnostic accuracy of nail Raman spectroscopy for fungal nail infections, specifically onychomycosis caused by Trichophyton rubrum. The study assessed the different ethyl alcohol retention rates between control and infected nails after soaking nail clippings in ethanolic solutions and drying. Results revealed that ethyl alcohol completely evaporated from infected nail samples, while significant amounts were still present in control samples. Principal component analysis (PCA) was applied to discriminate control from infected nails and showed superior group separation when nails were treated with ethyl alcohol. PCA loadings plot attributed the efficient classification to the ν_s (CCO) Raman vibrational mode of ethyl alcohol. As Raman spectroscopy can detect minute concentration changes of ethyl alcohol in nails and the deterioration caused by onychomycosis accelerates its evaporation, a simple and rapid method for detecting T. rubrum onychomycosis is proposed.

Progress of polymer-based strategies in fungal disease management: Designed for different roles

Fungal diseases have posed a great challenge to global health, but have fewer solutions compared to bacterial and viral infections. Development and application of new treatment modalities for fungi are limited by their inherent essential properties as eukaryotes. The microorganism identification and drug sensitivity analyze are limited by their proliferation rates. Moreover, there are currently no vaccines for prevention. Polymer science and related interdisciplinary technologies have revolutionized the field of fungal disease management. To date, numerous advanced polymer-based systems have been developed for management of fungal diseases, including prevention, diagnosis, treatment and monitoring. In this review, we provide an overview of current needs and advances in polymer-based strategies against fungal diseases. We high light various treatment modalities. Delivery systems of antifungal drugs, systems based on polymers' innate antifungal activities, and photodynamic therapies each follow their own mechanisms and unique design clues. We also discuss various prevention strategies including immunization and antifungal medical devices, and further describe point-of-care testing platforms as futuristic diagnostic and monitoring tools. The broad application of polymer-based strategies for both public and personal health management is prospected and integrated systems have become a promising direction. However, there is a gap between experimental studies and clinical translation. In future, well-designed in vivo trials should be conducted to reveal the underlying mechanisms and explore the efficacy as well as biosafety of polymer-based products.

Constant Voltage Iontophoresis Technique to Deliver Terbinafine via Transungual Delivery System: Formulation Optimization Using Box-Behnken Design and In Vitro Evaluation

Topical therapy of antifungals is primarily restricted due to the low innate transport of drugs through the thick multi-layered keratinized nail plate. The objective of this investigation was to develop a gel formulation, and to optimize and evaluate the transungual delivery of terbinafine using the constant voltage iontophoresis technique. Statistical analysis was performed using Box–Behnken design to optimize the transungual delivery of terbinafine by examining crucial variables namely concentration of polyethylene glycol, voltage, and duration of application (2–6 h). Optimization data in batches (F1–F17) demonstrated that chemical enhancer, applied voltage, and application time have influenced terbinafine nail delivery. Higher ex vivo permeation and drug accumulation into the nail tissue were noticed in the optimized batch (F8) when compared with other batches (F1–F17). A greater amount of terbinafine was released across the nails when the drug was accumulated by iontophoresis than the passive counterpart. A remarkably higher zone of inhibition was observed in nails with greater drug accumulation due to iontophoresis, as compared to the passive process. The results here demonstrate that the optimized formulation with low voltage iontophoresis could be a viable and alternative tool in the transungual delivery of terbinafine, which in turn could improve the success rate of topical nail therapy in onychomycosis.

Onychomycosis: Current Understanding and Strategies for Enhancing Drug Delivery into Human Nail Tissue

BACKGROUND

Onychomycosis is by far the most common finger or toe nail fungal infectious disease caused by dermatophytes, non-dermatophytic molds or yeast. It accounts for 50% of the total nail disorders, and affects patients physically, socially, and psychologically and can seriously influence their quality of life.

OBJECTIVES

Oral antifungals are routinely used to treat the nail fungal disease; however oral therapy is associated with severe side effects and longer treatment times. In recent years, drug delivery directly into the nail or nail bed has gained attention and various topical products have been tested that can cure the disease when applied topically or transungually. Nevertheless, drug penetration into and through the nail is not straightforward and requires chemicals to improve its permeability or by applying physical stress to promote drug penetration into and through the nail. This lucid review presents an overview of various causes of onychomycosis, current therapeutic approaches, and efforts aimed at increasing the permeability of nails through various strategies such as chemical, physical and mechanical methods for permeation enhancement.

CONCLUSION

Various strategies have been proposed for the treatment of onychomycosis, however, much research into a more precise and effective therapy is still required.

Effect of Penetration Enhancers on Toenail Delivery of Efinaconazole from Hydroalcoholic Preparations

The incorporation of permeation enhancers in topical preparations has been recognized as a simple and valuable approach to improve the penetration of antifungal agents into toenails. In this study, to improve the toenail delivery of efinaconazole (EFN), a triazole derivative for onychomycosis treatment, topical solutions containing different penetration enhancers were designed, and the permeation profiles were evaluated using bovine hoof models. In an in vitro permeation study in a Franz diffusion cell, hydroalcoholic solutions (HSs) containing lipophilic enhancers, particularly prepared with propylene glycol dicaprylocaprate (Labrafac PG), had 41% higher penetration than the HS base. Moreover, the combination of hydroxypropyl-β-cyclodextrin with Labrafac PG further facilitated the penetration of EFN across the hoof membrane. In addition, this novel topical solution prepared with both lipophilic and hydrophilic enhancers was physicochemically stable, with no drug degradation under ambient conditions (25 °C, for 10 months). Therefore, this HS system can be a promising tool for enhancing the toenail permeability and therapeutic efficacy of EFN.

Transungual Delivery, Anti-Inflammatory Activity, and In Vivo Assessment of a Cyclodextrin Polypseudorotaxanes Nail Lacquer

A new cyclodextrin polypseudorotaxanes nail lacquer (Regenail^®) containing biotin, methyl sulphonyl methane (MSM), and dimethylsilanediol salicylate was developed and evaluated in vitro and in vivo. The product was developed to improve nail status and diminish signs of pathological nail alterations. A reference product (Betalfatrus^®) was used for comparative purposes. An in vitro permeation experiment in hooves showed high MSM and biotin absorption. The content of sulfur and silicon in hooves was also found to be higher compared with the reference product. MSM was tested in human keratinocytes, exhibiting a good cytotoxicity profile and anti-inflammatory activity by the reduction in IL-8 and TNF-α under LPS stimuli. A clinical study was performed to check product safety and efficacy against nail brittleness and alterations such as Beau's lines and onychorrhexis. A reduction in both alterations and in surface roughness without alteration of nail structure was observed, with a good level of patient acceptance and satisfaction.

Optimization of Drug Permeation from 8% Ciclopirox Cyclodextrin/Poloxamer-Soluble Polypseudorotaxane-Based Nail Lacquers

Cyclodextrin/poloxamer-soluble polypseudorotaxane-based nail lacquers have demonstrated significant capacity for promoting the permeation of drugs into the nail plate. Furthermore, previous studies have shown that the use of hydroalcoholic blends as vehicles promotes drug permeation. The work described herein studies the effect of the type of alcohol used in the lacquer preparation, and the composition of the vehicle is optimized to obtain soluble doses of 8% and to promote the diffusion of ciclopirox base and olamine across the nail. Permeation studies on different types of alcohols show that optimum results are achieved with short-chain alcohols, and that results become less satisfactory the higher the number of alcohol carbons. In addition, solubility and penetration studies on the bovine hoof have enabled the composition of the lacquer to be optimized for both forms of ciclopirox. The results suggest that optimized lacquers have better ciclopirox diffusion and penetration properties than the commercial reference lacquer. Lastly, in vivo studies in which optimized ciclopirox olamine lacquer was applied for 45 days to the nails of healthy volunteers showed that it caused no negative effects or changes to the nail surface. These results demonstrate the significant potential of cyclodextrin/poloxamer-soluble polypseudorotaxane-based nail lacquers for the ungual administration of drugs.

Mechanistic Insights of Formulation Approaches for the Treatment of Nail Infection: Conventional and Novel Drug Delivery Approaches

Onychomycosis is a chronic disorder that is difficult to manage and hard to eradicate with perilous trends to relapse. Due to increased prevalence of HIV, use of immunosuppressant drugs and lifestyle-related factors, population affected with fungal infection of nail (Onychomycosis) happens to increase extensively in last two decades. Modalities available for the treatment of onychomycosis include systemically administered antifungals, mechanical procedures, and topical drug therapy. But the efficacy of the most of approaches to deliver drug at targeted site, i.e., deep-seated infected nail bed is limited due to compact and highly keratinized nail structure. A series of advanced formulation approaches, such as transfersomes, liposomes, nano/micro emulsion, nail lacquers etc., have been attempted to improve the drug penetration into nail plate more efficiently. The manuscript reviews these formulation approaches with their possible mechanisms by which they improve the drug penetration.Comparative analysis of available treatment modalities for onychomycosis has been provided with pros and cons of each alternatives. Additionally, ongoing research about the application of biological materials such as modified cationic antimicrobial peptides (AMPs), plant-derived proteins, and synthetic antimicrobial peptidomimetics have also been explored.

Effect of Penetration Enhancers on Drug Nail Permeability from Cyclodextrin/Poloxamer-Soluble Polypseudorotaxane-Based Nail Lacquers

Nail delivery has interest for local treatment of nail diseases. Nevertheless, the low permeability of drugs in the nail plaque precludes the efficacy of local treatments. The use of penetration enhancers can increase drug permeability and improve the efficacy of the treatment of nail pathologies. In this work, different chemical substances have been evaluated as potential penetration enhancers. With this aim, the effect of different substances such as sodium lauryl sulfate (SLS), polyethylene glycol 300 (PEG 300), carbocysteine, N-acetylcysteine, lactic acid, potassium phosphate, Labrasol® and Labrafil® in the microstructure, nail surface and drug permeability has been evaluated. The models obtained by mercury intrusion porosimetry and PoreXpert™ software show a more porous structure in nails treated with different enhancers. Permeation studies with bovine hooves and nails revealed that all the hydroalcoholic lacquers developed, and particularly those prepared with SLS, provide better nail penetration of the drugs ciclopirox olamine and clobetasol propionate. Results have shown that the increase of the drug penetration in the nail is caused by the formation of a porous random microstructure and by the decrease of the contact angle between lacquers and the surface or the nail plaque. The presence of SLS produces an improvement in the spreading of the solution on the nail surface and promotes the penetration of the solution into the nail pores. The hydroalcoholic lacquer, elaborated with cyclodextrin/poloxamer soluble polypseudorotaxane and sodium lauryl sulfate as an enhancer, allowed the rate of diffusion and penetration of the active ingredient within the nail to be significantly higher than obtained with the reference lacquers when using either ciclopirox olamine or clobetasol propionate as the active ingredient.