Stability and Safety Traits of Novel Cyclosporine A and Tacrolimus Ophthalmic Galenic Formulations Involved in Vernal Keratoconjunctivitis Treatment by a High-Resolution Mass Spectrometry Approach

Drug-Modified Contact Lenses-Properties, Release Kinetics, and Stability of Active Substances with Particular Emphasis on Cyclosporine A: A Review

The following review focuses on the manufacturing and parameterizing of ocular drug delivery systems (DDS) using polymeric materials to create soft contact lenses. It discusses the types of drugs embedded into contact lenses, the various polymeric materials used in their production, methods for assessing the mechanical properties of polymers, and techniques for studying drug release kinetics. The article also explores strategies for investigating the stability of active substances released from contact lenses. It specifically emphasizes the production of soft contact lenses modified with Cyclosporine A (CyA) for the topical treatment of specific ocular conditions. The review pays attention to methods for monitoring the stability of Cyclosporine A within the discussed DDS, as well as investigating the influence of polymer matrix type on the stability and release of CyA.

Hospital-prepared low-dose atropine eye drops for myopia progression control using atropine sulfate injection diluted in normal saline and lubricants

Objective

As low-dose atropine eye-drops for myopia progression control prepared in-house by diluting the commercial 0.1% atropine eye-drop with sterile water or normal saline has been a common practice whereas atropine injection is readily available and could be a more feasible alternative, this study aimed to assess the properties of the in-house low-dose atropine eye-drops prepared by diluting the atropine injection in two solvents and tested in two temperature conditions.

Results

The 0.01% atropine eye-drops contains no bacteria, fungi, or particulate matter. The levels of atropine sulfate on all samples were comparable to the freshly prepared samples at the 12th week, regardless of the solvents used or storage conditions. The low-dose atropine eye-drops prepared from readily available atropine sulfate injection at healthcare facilities could be an alternative to commercial products.

Physicochemical Stability of a Novel Tacrolimus Ophthalmic Formulation for the Treatment of Ophthalmic Inflammatory Diseases

Tacrolimus is an immunosuppressant used to treat a large variety of inflammatory or immunity-mediated ophthalmic diseases. However, there are currently no commercial industrial forms available that can provide relief to patients. Various ophthalmic formulations have been reported in the literature, but their stability has only been tested over short periods. The objective of this study was to evaluate the physicochemical stability of a preservative-free tacrolimus formulation (0.2 and 1 mg/mL) at three storage temperatures (5 °C, 25 °C and 35 °C) for up to nine months in a multidose eyedropper. Analyses performed were the following: visual inspection and chromaticity, turbidity, viscosity, size of micelles, osmolality and pH measurements, tacrolimus quantification by a stability-indicating liquid chromatography method, breakdown product research, and sterility assay. In an in-use study, tacrolimus quantification was also performed on the drops emitted from the eyedroppers. All tested parameters remained stable during the nine month period when the eyedrops were stored at 5 °C. However, during storage at 25 °C and 35 °C, several signs of chemical instability were detected. Furthermore, a leachable compound originating from a silicone part of the eyedropper was detected during the in-use assay. Overall, the 0.2 mg/mL and 1 mg/mL tacrolimus ophthalmic solutions were physicochemically stable for up to nine months when stored at 5 °C.

Vernal keratoconjunctivitis: An update

Vernal keratoconjunctivitis (VKC) and atopic keratoconjunctivitis (AKC) are potentially severe and complex disease in its management among the various allergic eye diseases. In this regard, studies clarified the etiopathogenetic mechanisms. The workup should be multidisciplinary. The treatment includes topical and systemic medications with anti-inflammatory and immunosuppressant activity. However, a definition of nationally- and internationally-shared diagnostic protocols would also be needed and validated access to therapeutic options of proven safety and efficacy to avoid the use of galenic preparations, up to now still essential in the management of moderate-severe VKC. Finally, recognizing VKC and AKC, among rare diseases, at a national and international level would be an essential step to allow the management of VKC with adequate timings and settings within the National Health System.

A simple and fast liquid chromatography tandem mass spectrometry method to determine cyclosporine A concentrations in endomyocardial biopsies

Measuring cyclosporine A (CsA), an immunosuppressive drug used to prevent heart transplant rejection, concentrations in myocardial biopsies might be more informative than its measurement in whole blood. Therefore, a fast, accurate and reproductive method to determine CsA concentration in this complex matrix is needed. We report the validation of a liquid chromatography tandem mass spectrometry method to measure CsA concentration in heart parenchyma, applicable to everyday practice. The method was found to be precise, accurate, reproducible, specific of CsA, and without any matrix effect or carry-over. The lower limit of quantification was 50 pg of CsA in myocardium. The method was linear up to 2000 pg of CsA in myocardium. Samples were found stable for one year at - 80 °C. At last, 40 drugs which could be prescribed to heart transplant recipients were tested with the method and showed no interference with CsA signal. The method was suitable to quantify CsA in endomyocardial biopsies from heart transplanted patients. This method allows designing clinical studies aiming at exploring the relationship between CsA intra-graft concentrations and outcome.

Do Ophthalmic Solutions of Amphotericin B Solubilised in 2-Hydroxypropyl-γ-Cyclodextrins Possess an Extended Physicochemical Stability?

Fungal keratitis is a sight-threatening disease for which amphotericin B eye drops is one of the front-line treatments. Unfortunately, there are currently no commercial forms available, and there is little data concerning the long-term stability of compounded formulations based on intravenous dosages forms. New formulations of amphotericin B ophthalmic solutions solubilised with γ-cyclodextrins have shown promising in-vitro results, but stability data is also lacking. The objective of this study was therefore to investigate the stability of a formulation of ready-to-use amphotericin B solubilised in 2-hydroxypropyl-γ-cyclodextrins (AB-HP-γ-CD), for 350 days. An amphotericin B deoxycholate (ABDC) formulation was used as a comparator. Analyses used were the following: visual inspection, turbidity, osmolality and pH measurements, amphotericin B quantification by a stability-indicating liquid chromatography method, breakdown product research, and sterility assay. AB-HP-γ-CD formulation showed signs of chemical instability (loss of amphotericin B) after 28 and 56 days at 25 °C and 5 °C. Adding an antioxidant (ascorbic acid) to the formulation did not improve stability. ABDC formulation showed signs of physical instability (increased turbidy and amphotericin B precipitation) after 28 days and 168 days at 25 °C and 5 °C. As such, AB-HP-γ-CD formulation does not provide long-term stability for ophthalmic amphotericin B solutions.

Stability of Ophthalmic Atropine Solutions for Child Myopia Control

Myopia is an ophthalmic condition affecting more than 1/5th of the world population, especially children. Low-dose atropine eyedrops have been shown to limit myopia evolution during treatment. However, there are currently no commercial industrial forms available and there is little data published concerning the stability of medications prepared by compounding pharmacies. The objective of this study was to evaluate the stability of two 0.1 mg/mL atropine formulations (with and without antimicrobiobial preservatives) for 6 months in two different low-density polyethylene (LDPE) multidose eyedroppers. Analyses used were the following: visual inspection, turbidity, chromaticity measurements, osmolality and pH measurements, atropine quantification by a stability-indicating liquid chromatography method, breakdown product research, and sterility assay. In an in-use study, atropine quantification was also performed on the drops emitted from the multidose eyedroppers. All tested parameters remained stable during the 6 months period, with atropine concentrations above 94.7% of initial concentration. A breakdown product (tropic acid) did increase slowly over time but remained well below usually admitted concentrations. Atropine concentrations remained stable during the in-use study. Both formulations of 0.1 mg/mL of atropine (with and without antimicrobial preservative) were proved to be physicochemically stable for 6 months at 25 °C when stored in LDPE bottles, with an identical microbial shelf-life.