In Situ Gel Formation in Microporated Skin for Enhanced Topical Delivery of Niacinamide

Simultaneous Identification of Vitamins B1, B3, B5, and B6 by an Engineered Nanopore

Vitamin Bs, a group of water-soluble compounds, are essential nutrients for almost all living organisms. However, due to their structural heterogeneity, rapid and simultaneous analysis of multiple vitamin Bs is still challenging. In this paper, it is discovered that a hetero-octameric Mycobacterium smegmatis porin A (MspA) nanopore containing a sole nickel ion-bound nitrilotriacetic acid (NTA-Ni) adapter at its pore constriction is suitable for the simultaneous sensing of different vitamin Bs, including vitamin B1 (thiamine), vitamin B3 (nicotinic acid and nicotinamide), vitamin B5 (pantothenic acid), and vitamin B6 (pyridoxine, pyridoxal, and pyridoxamine). Assisted by a custom machine learning algorithm, all seven vitamin Bs can be fully distinguished, reporting a general accuracy of 99.9%. This method was further validated in the rapid analysis of commercial cosmetics and natural food, suggesting its potential uses in food and drug administration.

Recent progress in PLGA-based microneedle-mediated transdermal drug and vaccine delivery

Microneedles (MNs) have recently been found to have applications in drug, vitamin, protein and vaccine delivery. Polymeric MN arrays continue to attract increasing attention due to their capability to bypass the skin's stratum corneum (SC) barrier with minimal invasiveness. These carriers can achieve the targeted intradermal delivery of drugs and vaccines and improve their transdermal delivery level. As a nontoxic FDA-approved copolymer, polylactic glycolic acid (PLGA) has good biocompatibility and biodegradability. Currently, PLGA-based MNs have a noticeable tendency to be utilized as a delivery system. This study focuses on the most recent advances in PLGA-based MNs. Both PLGA nanoparticle-based MNs and PLGA matrix-based MNs, created for the delivery of vaccines, drugs, proteins and other therapeutic agents, are discussed. The paper also discusses the various types of MNs and their potential applications. Finally, the prospects and challenges of PLGA-based MNs are reviewed.

Fabrication of Polymeric Microneedles using Novel Vacuum Compression Molding Technique for Transdermal Drug Delivery

PURPOSE

To demonstrate the feasibility of vacuum compression molding as a novel technique for fabricating polymeric poly (D, L-lactic-co-glycolic acid) microneedles.

METHODS

First, polydimethylsiloxane molds were prepared using metal microneedle templates and fixed in the MeltPrep® Vacuum Compression Molding tool. Poly (D, L-lactic-co-glycolic acid) (EXPANSORB® DLG 50-5A) was added, enclosed, and heated at 130°C for 15 min under a vacuum of -15 psi, cooled with compressed air for 15 min, followed by freezing at -20°C for 30 min, and stored in a desiccator. The microneedles and microchannels were characterized by a variety of imaging techniques. In vitro permeation of model drug lidocaine as base and hydrochloride salt was demonstrated across intact and microporated dermatomed human skin.

RESULTS

Fabricated PLGA microneedles were pyramid-shaped, sharp, uniform, and mechanically robust. Scanning electron microscopy, skin integrity, dye-binding, histology, and confocal laser microscopy studies confirmed the microchannel formation. The receptor delivery of lidocaine salt increased significantly in microporated (270.57 ± 3.73 μg/cm²) skin as compared to intact skin (142.19 ± 13.70 μg/cm²) at 24 h. The receptor delivery of lidocaine base from microporated skin was significantly higher (312.37 ± 10.57 μg/cm²) than intact skin (169.68 ± 24.09 μg/cm²) up to 8 h. Lag time decreased significantly for the base (2.24 ± 0.17 h to 0.64 ± 0.05 h) and salt (4.76 ± 0.31 h to 1.47 ± 0.21 h) after microporation.

CONCLUSION

Vacuum compression molding was demonstrated as a novel technique to fabricate uniform, solvent-free, strong polymer microneedles in a short time.

Utilization of ex vivo tissue model to study skin regeneration following microneedle stimuli

Microneedling is a popular skin resurfacing and rejuvenation procedure. In order to develop better adjunct products for consumers, there is a scientific need to establish greater understanding of the mechanism in which microneedling stimulates regeneration within skin. The purpose of this study is to develop a physiologically relevant ex vivo tissue model which closely mimics the actual microneedling procedure to elucidate its mechanism of action. In this study, human ex vivo skin was subjected to microneedling treatment and cultured for 6 days. Histological analysis demonstrated that the ex vivo skin was able to heal from microneedling injury throughout the culture period. Microneedling treatment stimulated proliferation and barrier renewal of the skin. The procedure also increased the levels of inflammatory cytokines and angiogenic growth factors in a dynamic and time dependent fashion. The tissue demonstrated hallmark signs of epidermal regeneration through morphological and molecular changes after the treatment. This is one of the first works to date that utilizes microneedled ex vivo skin to demonstrate its regenerative behavior. Our model recapitulates the main features of the microneedling treatment and enables the evaluation of future cosmetic active ingredients used in conjunction with microneedling.

Microneedles Assisted Controlled and Improved Transdermal Delivery of High Molecular Drugs via Insitu Forming Depot Thermoresponsive Poloxamers Gels in Skin Microchannels

Skin considered as an attractive route for variety of drug molecules administration. However it proved to be the main physical barrier for drug flux owing to their poor permeability and low bioavailability across stratum corneum layer. In current study novel approach has been used to enhance transdermal delivery via microporation through combination of poloxamers gels and microneedles arrays. The phase transition of poloxamers at various concentrations from sol-gel was evaluated using AR2000 rheometer to confirm microneedles-assisted insitu forming depots. Temperature test confirmed gelation between 32-37 °C. Curcumin was loaded in poloxamer formulations at variable concentrations and its effect showed reduction in critical gelation temperature (CGT) owing to its hydrophobic nature. Microneedles (MNs) arrays (600 µm) prepared from Gantrez S-97, PEG 10000 and Gelatin B using (19 × 19) laser-engineered silicone micromoulds showed high mechanical stability investigated via Texture analyzer. From insitu dissolution profile Gelatin 15% w/w based MNs displayed quicker dissolution rate in comparison to PG10000. VivoSight® OCT scanner and dye tracking confirmed that PG10000 MNs arrays pierced SC layer, infiltrate the epidermis and goes to dermis layer. From invitro permeation, it was concluded that 20% w/w PF127^® gel formulations containing (0.1% and 0.3%) curcumin displayed high curcumin permeation for comparatively longer time through microporated skin samples in comparison to non-microporated skin. The curcumin distribution in skin tissues with higher florescence intensity was noted in MNs treated skin samples by confocal microscopy. FTIR confirmed the structure formation of fabricated MNs, while TGA showed dry, brittle and rigid nature of Gelatin MNs.

Penetration Enhancement Strategies for Intradermal Delivery of Cromolyn Sodium

This study aimed to explore the use of chemical and physical enhancement strategies for the intradermal delivery of cromolyn sodium (CS) for treatment of atopic dermatitis. CS gels were formulated to individually contain 2.5 and 9% salcaprozate sodium (SNAC) as a potential chemical enhancer. The effect of microneedles, alone and in combination with SNAC, was investigated via in vitro permeation studies. Skin impedance and FTIR evaluation of SNAC-treated stratum corneum (SC) was done and compared to the control. The amount of drug delivered in the dermis after 24 h by the 2.5% and 9% SNAC gels was 23.29 ± 1.89 µg/cm² and 35.87 ± 2.23 µg/cm², respectively, which were significantly higher than the control (p < 0.05) but were not remarkably different from each other (p > 0.05). Microneedles enhanced permeation in both the control and 2.5% SNAC groups (p < 0.05); however, no synergistic enhancement was observed when microneedle and SNAC treatments were combined (p > 0.05). Over 24 h of treating the SC with 2.5% SNAC, FTIR evaluation showed stretches on the CH₂ asymmetric and symmetric stretching vibrations observed at 2920.23 cm^-1 and 2850.79 cm^-1 respectively in untreated SC, which shifted to higher wavenumbers and indicated some lipid fluidizing effect. However, no significant drop in skin impedance was seen with SNAC as compared to the control (p > 0.05). SNAC was concluded to have skin permeation enhancement effect on CS, while microneedles effectively enhanced CS permeation even in the absence of SNAC.

Microneedle and iontophoresis mediated delivery of methotrexate into and across healthy and psoriatic skin

Psoriasis is a condition of the skin which involves scales, dry patches, and inflammation. Methotrexate (logP: -1.8, MW:454.44 g/mol) is administered orally or intravenously to treat psoriasis. The first-pass metabolism and systemic toxicity can be avoided by administration via skin. Topical and transdermal delivery of methotrexate using iontophoresis and microneedles, alone and in combination was investigated using full-thickness healthy human skin. It is also equally relevant to evaluate the delivery into and across damaged/diseased skin. Hence, this study investigated the delivery of methotrexate using ex vivo healthy and psoriatic human skin to understand the effect of skin disease condition on delivery of methotrexate via skin. A lower resistance and a higher TEWL for psoriatic skin indicated damaged barrier function, while histology studies indicated epithelial hyperproliferation and elongated rete ridges. Using the optimized iontophoretic parameters, there was no significant difference in receptor delivery for psoriatic skin (39.51 ± 4.45 µg/sq.cm) as compared to healthy skin (43.15 ± 0.83 µg/sq.cm). However, methotrexate delivery into psoriatic skin (126.23 ± 24.65 µg/sq.cm) was significantly higher as compared to healthy skin (12.02 ± 4.89 µg/sq.cm). Thus, significantly higher total delivery was observed from psoriatic skin than healthy skin.

Intelligent Paper-Free Sprayable Skin Mask Based on an In Situ Formed Janus Hydrogel of an Environmentally Friendly Polymer

Traditional skin care masks usually use a piece of paper to hold the aqueous essences, which are not environmentally friendly and not easy to use. While a paper-free mask is desired, it is faced with a dilemma of moisture holding and rapid release of encapsulated bioactive substances. Herein, a paper-free sprayable skin mask is designed from an intelligent material-a thermogel which undergoes sol-gel-suspension transitions upon heating-to solve this dilemma. A synthesized block copolymer of poly(ethylene glycol) and poly(lactide-co-glycolide) with appropriate ratios can be dissolved in water, and thus easily mixed with a biological substance. The mixture is sprayable. After spraying, a Janus film is formed in situ with a physical gel on the outside and a suspension on the inside facing skin. Thus, both moisture holding and rapid release are achieved. Such a thermogel composed of biodegradable amphiphilic block copolymers loaded with nicotinamide as a skin mask is verified to reduce pigmentation on a 3D pigmented reconstructed epidermis model and further in a clinical study. This work might be stimulating for investigations and applications of biodegradable and intelligent soft matter in the fields of drug delivery and regenerative medicine.

The Importance of Nanocarrier Design and Composition for an Efficient Nanoparticle-Mediated Transdermal Vaccination

The World Health Organization estimates that the pandemic caused by the SARS-CoV-2 virus claimed more than 3 million lives in 2020 alone. This situation has highlighted the importance of vaccination programs and the urgency of working on new technologies that allow an efficient, safe, and effective immunization. From this perspective, nanomedicine has provided novel tools for the design of the new generation of vaccines. Among the challenges of the new vaccine generations is the search for alternative routes of antigen delivery due to costs, risks, need for trained personnel, and low acceptance in the population associated with the parenteral route. Along these lines, transdermal immunization has been raised as a promising alternative for antigen delivery and vaccination based on a large absorption surface and an abundance of immune system cells. These features contribute to a high barrier capacity and high immunological efficiency for transdermal immunization. However, the stratum corneum barrier constitutes a significant challenge for generating new pharmaceutical forms for transdermal antigen delivery. This review addresses the biological bases for transdermal immunomodulation and the technological advances in the field of nanomedicine, from the passage of antigens facilitated by devices to cross the stratum corneum, to the design of nanosystems, with an emphasis on the importance of design and composition towards the new generation of needle-free nanometric transdermal systems.

Microneedle-mediated transdermal delivery of naloxone hydrochloride for treatment of opioid overdose

Naloxone (NAL) is administered parenterally or intranasally for treating opioid overdose. The short duration of action of NAL calls for frequent re-dosing which may be eliminated by the development of a transdermal system. This study aimed to assess the effect of microneedles on improving the skin permeation of NAL hydrochloride. In vitro permeation of NAL across intact and microneedle-treated (Dr. Pen™ Ultima A6) porcine skin was evaluated. The effect of microneedle length and application duration, and donor concentration on NAL permeation were investigated. In-vitro in-vivo correlation of the permeation results was done to predict the plasma concentration kinetics of NAL in patients. In vitro passive permeation of NAL after 6 h was observed to be 8.25±1.06 µg/cm². A 56- and 37-fold enhancement was observed with 500 and 250 µm needles applied for 1 min, respectively. Application of 500 µm MNs for 2 min significantly reduced the lag time to ~ 8 min and increasing the donor concentration for the same treatment group doubled the permeation (p < 0.05). Modeling simulations demonstrated the attainment of pharmacokinetic profile of NAL comparable to those obtained with the FDA-approved intramuscular and intranasal devices. Microneedle-mediated transdermal delivery holds potential for rapid and sustained NAL delivery for opioid overdose treatment.

Tyrosol Derived Poly(ester-arylate)s for Sustained Drug Delivery from Microparticles

New biodegradable polymers are needed for use in drug delivery systems to overcome the high burst release, lack of sustained drug release, and acidic degradation products frequently observed in current formulations. Commercially available poly(lactide-co-glycolide) (PLGA) is often used for particle drug release formulations; however, it is often limited by its large burst release and acidic degradation products. Therefore, a biocompatible and biodegradable tyrosol-derived poly(ester-arylate) library has been used to prepare a microparticle drug delivery system which shows sustained delivery of hydrophobic drugs. Studies were performed using polymers with varying hydrophilicity and thermal properties and compared to PLGA. Various drug solubilizing cosolvents were used to load model drugs curcumin, dexamethasone, nicotinamide, and acyclovir. Hydrophobic drugs curcumin and dexamethasone were successfully loaded up to 50 weight percent (wt %), and a linear correlation between drug wt % loaded and the particle glass transition temperature (T_g) was observed. Both curcumin and dexamethasone were visible on the particle surface at 20 wt % loading and higher. By adjusting the polymer concentration during particle formation, release rates were able to be controlled. Release studies of dexamethasone loaded particles with a lower polymer concentration showed a biphasic release profile and complete release after 47 days. Particles prepared using a higher polymer concentration showed sustained release for up to 77 days. Comparably, PLGA showed a traditional triphasic release profile and complete release after 63 days. This novel tyrosol-derived poly(ester-arylate) library can be used to develop injectable, long-term release formulations capable of providing sustained drug delivery.

Impact of Different Mixing Methods on the Performance of Suspension-Based Transdermal Delivery Systems

Suspension-based matrix transdermal delivery systems (TDSs) are specialized systems that maintain a continuous driving force for drug delivery over prolonged wear. The pressure-sensitive adhesive (PSA) is the most critical constituent of such systems. Our study aimed to determine the effect of different mixing methods on the performance of silicone PSA-based suspension TDSs. Lidocaine suspension TDSs were prepared using conventional slow rotary mixing, high-speed homogenization, bead-mill homogenization, vortex shaking, and by an unguator. Resultant TDSs were tested for tack, shear, and peel properties and correlated to coat weight, content uniformity, microstructure, and in vitro permeation across dermatomed human skin. Every mixing method tested caused a significant reduction in peel. However, bead-mill homogenization resulted in significant loss of all adhesive properties tested, while unguator-mixed TDSs retained most properties. Good linear correlation (R² = 1.000) between the shear properties of the TDSs with the average cumulative amount of lidocaine permeated after 24 h was observed, with no significant difference between percutaneous delivery from slow rotary-mixed systems (1334 ± 59.21 μg/cm²) and unguator-mixed systems (1147 ± 108.3 μg/cm²). However, significantly lower delivery from bead-mill homogenized systems (821.1 ± 28.00 μg/cm²) was noted. While many factors affect TDS performance, careful consideration must also be given to the processing parameters during development as they have been shown to affect the resultant system's therapeutic efficacy. Extensive mixing with bead-mill homogenization demonstrated crystallization of drug, loss in adhesive properties, coat weight, and film thickness, with reduced transdermal delivery of lidocaine from the prepared system.

Development and evaluation of a heparin gel for transdermal delivery via laser-generated micropores

Aim: Our study investigated the feasibility of transdermal delivery of heparin, an anticoagulant used against venous thromboembolism, as an alternative to intravenous administration. Materials & methods: Skin was pretreated using ablative laser (Precise Laser Epidermal System [P.L.E.A.S.E.^®] technology) for enhanced delivery of heparin. In vitro permeation studies using static Franz diffusion cells provided a comparison between delivery from 0.3% w/v heparin-loaded poloxamer gel and solution across untreated and laser-treated dermatomed porcine ear skin. Results: No passive delivery of heparin was observed. Laser-assisted delivery from solution (26.07 ± 1.82 μg/cm²) was higher (p < 0.05) than delivery from heparin gel (11.28 ± 5.32 μg/cm²). However, gel is likely to sustain the delivery over prolonged periods like a maintenance dose via continuous intravenous infusion. Conclusion: Thus, ablative laser pretreatment successfully delivered heparin, establishing the feasibility of delivering hydrophilic macromolecules using the transdermal route.

Cosmeceutical Aptitudes of Niacinamide: A Review

BACKGROUND

The prevalence and scope of dermatological illness differ from region to region. Based upon type and severity, the conditions may vary from superficial to deep systemic skin infections. Niacinamide, an amide analog of vitamin B3 which was conventionally utilized as a food supplement, is now explored for the management of skin disorders. Being a powerhouse on its own, it is not stored inside the body naturally and has to be acquired from external sources. Areas Covered: This review is an attempt to disclose the physiology, pharmacology, and highlight the dermatological potentials of niacinamide, discussing its pharmacological mechanisms, varied commercially available treatments, and novel approaches, i.e., in research and patented formulations.

RESULTS

Niacinamide has been verified in treating almost every skin disorder, viz. aging, hyperpigmentation, acne, psoriasis, pruritus, dermatitis, fungal infections, epidermal melasma, non-melanoma skin cancer, etc. It has been reported to possess numerous properties, for instance, anti-inflammatory, antimicrobial, antioxidant, antipruritic, and anticancer, which makes it an ideal ingredient for varied dermal therapies. Long term use of niacinamide, regardless of the skin type, paves the way for new skin cells, making skin healthier, brighter, and hydrated.

CONCLUSION

Niacinamide possesses a variety of positive characteristics in the field of dermatology. Novel approaches are warranted over current treatments which could bypass the above shortcomings and form an effective and stable system. Hence, niacinamide has the potential to become an individual and a productive component with wide future scope.