Mixed Pluronic-Cremophor Polymeric Micelles as Nanocarriers for Poorly Soluble Antibiotics-The Influence on the Antibacterial Activity

Tannic acid coated nanosuspension for oral delivery of chrysin intended for anti-schizophrenic effect in mice

Chrysin is a flavonoid drug with numerous therapeutic activities. It suffers from low intestinal absorption owing to its hydrophobicity. Therefore, the aim of this study is to exploit the efficient technique of nanosuspension (NSP) to formulate chrysin-NSP coated with tannic acid (TA) to improve the solubility and anti-schizophrenic activity of chrysin. A 23 full factorial design was constructed where the independent factors were type of polymer, surfactant concentration (0.5 or 1 %) and the aqueous phase volume (5 or 15 mL), while the dependent responses were the particle size (PS) of the obtained formulation as well as the % chrysin dissolved after 2 h (Q2h). The optimum formulation (NSP-4) composed of 1 % PEG 400 and 1 % Cremophor RH40 in 15 mL aqueous phase. It achieved a PS and Q2h values of 108.00 nm and 38.77 %, respectively. NSP-4 was then coated with TA (TA-coated NSP-4) for further enhancement of chrysin solubility. TA-coated NSP-4 revealed PS and zeta potential values of 150 ± 14 nm and -32.54 ± 2.45 mV, respectively. After 6 h, chrysin dissolved % were 53.97 and 80.22 for uncoated NSP-4 and TA-coated NSP-4, respectively, compared with only 9.47 for free chrysin. The developed formulations and free chrysin were assessed regarding their effect on schizophrenia induced in mice by cuprizone (CPZ). Treatment with the developed formulations and free chrysin ameliorated demyelination and behavioral deficit induced by CPZ via elevating MBP and PI3K/PKC activities as well as reducing GFAP expression levels. The developed formulations and free chrysin inhibited Galactin-3 and TGF-β expressions and stimulated GST antioxidant enzyme. Furthermore, they maintained the balances in glutamatergic and dopaminergic neurotransmission via modulation on neuregulin-1 and alleviated nuclear pyknosis and degeneration in the neurons. The order of activity was: TA-coated NSP-4 > NSP-4 > free chrysin.

Preparation and characterization of a curcumin nanoemulsion gel for the effective treatment of mycoses

Fungal infections of skin including mycoses are one of the most common infections in skin or skins. Mycosis is caused by dermatophytes, non-dermatophyte moulds and yeasts. Various studies show different drugs to treat mycoses, yet there is need to treat it with applied drugs delivery. This study was designed to prepare a bio curcumin (CMN) nanoemulsion (CMN-NEs) for transdermal administration to treat mycoses. The self-nanoemulsification approach was used to prepare a nanoemulsion (NE), utilizing an oil phase consisting of Cremophor EL 100 (Cre EL), glyceryl monooleate (GMO), and polyethylene glycol 5000 (PEG 5000). Particle size (PS), polydispersity index (PDI), zeta potential (ZP), Fourier transform infrared (FTIR) spectrophotometric analysis, and morphological analyses were performed to evaluate the nanoemulsion (NE). The in vitro permeation of CMN was investigated using a modified vertical diffusion cell with an activated dialysis membrane bag. Among all the formulations, a stable, spontaneously produced nanoemulsion was determined with 250 mg of CMN loaded with 10 g of the oil phase. The average droplet size, ZP, and PDI of CMN-NEs were 90.0 ± 2.1 nm, - 7.4 ± 0.4, and 0.171 ± 0.03 mV, respectively. The release kinetics of CMN differed from zero order with a Higuchi release profile as a result of nanoemulsification, which also significantly increased the flux of CMN permeating from the hydrophilic matrix gel. Overall, the prepared nanoemulsion system not only increased the permeability of CMN but also protected it against chemical deterioration. Both CMN-ME (24.0 ± 0.31 mm) and CMN-NE gel (29.6 ± 0.25 mm) had zones of inhibition against Candida albicans that were significantly larger than those of marketed Itrostred gel (21.5 ± 0.34 mm). The prepared CMN-NE improved the bioavailability, better skin penetration, and the CMN-NE gel enhanced the release of CMN from the gel matrix on mycotic patients.

New Weapons to Fight against Staphylococcus aureus Skin Infections

The treatment of Staphylococcus aureus skin and soft tissue infections faces several challenges, such as the increased incidence of antibiotic-resistant strains and the fact that the antibiotics available to treat methicillin-resistant S. aureus present low bioavailability, are not easily metabolized, and cause severe secondary effects. Moreover, besides the susceptibility pattern of the S. aureus isolates detected in vitro, during patient treatment, the antibiotics may never encounter the bacteria because S. aureus hides within biofilms or inside eukaryotic cells. In addition, vascular compromise as well as other comorbidities of the patient may impede proper arrival to the skin when the antibiotic is given parenterally. In this manuscript, we revise some of the more promising strategies to improve antibiotic sensitivity, bioavailability, and delivery, including the combination of antibiotics with bactericidal nanomaterials, chemical inhibitors, antisense oligonucleotides, and lytic enzymes, among others. In addition, alternative non-antibiotic-based experimental therapies, including the delivery of antimicrobial peptides, bioactive glass nanoparticles or nanocrystalline cellulose, phototherapies, and hyperthermia, are also reviewed.

Curcumin/Fusidic Acid Bitherapy Loaded Mixed Micellar Nanogel for Acne Vulgaris Treatment: In Vitro and In Vivo Studies

The combination of herbal drugs with a topical antibacterial for managing a chronic disease like acne vulgaris has emerged lately to settle side effects and bacterial multidrug resistance. Mixed micelles (MMs) incorporated into nanogel were explored for hybrid delivery of curcumin (Cur) and fusidic acid (FA) combination presenting a multi-strategic treatment. Curcumin-fusidic acid-loaded mixed micelles (Cur-FA-MMs) were assessed for size, surface charge, compatibility, in vitro release, and encapsulation. The selected formula was further loaded into nanogel and investigated for viscosity, ex vivo permeation, and in vivo potential. Cur-FA-MMs exhibited uniform nanosized spherical morphology, and negative surface charge affording high encapsulation for both drugs with a biphasic in vitro release over a period of 48h and good colloidal stability. The attained Cur-FA-MM-loaded nanogel had optimum viscosity with remarkable permeation coefficient values nearly 2-fold that related to plain nanogel. The pharmacodynamic effect of Cur on FA was pronounced by the significant improvement of the skin's degree of inflammation, epidermal hypertrophy, and congestion in animals treated with Cur-FA-MM-loaded nanogel. In conclusion, micellar nanogel could enable the progressive effect of Cur (an antioxidant with reported antibiotic activity) on FA (antibiotic) and decrease the risk of emerging antibiotic resistance by enhancing the solubility and permeation of Cur.

Effect of flowing water on the pharmacokinetic properties of norfloxacin in channel catfish ( Ictalurus punctatus ) after single‐dose oral administration

BACKGROUND

The recirculating aquaculture system (RAS) is a widely used, water-saving and efficient aquaculture model. However, bacterial diseases are common in farmed fish reared at high densities. Although antibiotics effectively treat these diseases, developing efficient methods to increase drug clearance in fish and decrease the concentrations of antibiotic residues in aquatic products is essential.

OBJECTIVES

This study evaluates the effect of flowing water in the RAS on norfloxacin (NOR) pharmacokinetics in channel catfish (Ictalurus punctatus).

METHODS

Channel catfish were randomly divided into the control group (RAS group) and the experimental group (flow-through aquaculture system group) (120 individuals/group). A NOR dose of 20 mg/kg was then orally administered to the fish. Plasma, muscle, liver and kidney samples were collected up to 168 h after treatment. NOR concentrations were measured using liquid chromatography-mass spectrometry, and pharmacokinetic parameters were calculated using a non-compartmental method.

RESULTS

Flowing water had a significant effect on the plasma pharmacokinetics and tissue distribution of NOR, increasing NOR clearance in the kidney, muscle and plasma. The time to maximum concentration of NOR was shorter in the plasma and longer in the kidney and liver. Moreover, flowing water increased the maximum concentration of NOR in the kidney, muscle and plasma and decreased the area under the concentration-time curve from time 0 to the last measurable concentration in the liver and plasma. Flowing water decreased the withdrawal period in muscle from 10 to 6 days.

CONCLUSIONS

These results indicate that flowing water can potentially increase NOR clearance in channel catfish.

Nanotechnology: a contemporary therapeutic approach in combating infections from multidrug-resistant bacteria

In the 20th century, the discovery of antibiotics played an essential role in the fight against infectious diseases, including meningitis, typhoid fever, pneumonia and Mycobacterium tuberculosis. The development of multidrug resistance in microflora due to improper antibiotic use created significant public health issues. Antibiotic resistance has increased at an alarming rate in the past few decades. Multidrug-resistant bacteria (superbugs) such as methicillin-resistant Staphylococcus aureus (MRSA) as well as drug-resistant tuberculosis pose serious health implications. Despite the continuous increase in resistant microbes, the discovery of novel antibiotics is constrained by the cost and complexities of discovery of drugs. The nanotechnology has given new hope in combating this problem. In the present review, recent developments in therapeutics utilizing nanotechnology for novel antimicrobial drug development are discussed. The nanoparticles of silver, gold and zinc oxide have proved to be efficient antimicrobial agents against multidrug-resistant Klebsiella, Pseudomonas, Escherichia Coli and MRSA. Using nanostructures as carriers for antimicrobial agents provides better bioavailability, less chances of sub-therapeutic drug accumulation and less drug-related toxicity. Nanophotothermal therapy using fullerene and antibody functionalized nanostructures are other strategies that can prove to be helpful.

Tadalafil Nanoemulsion Mists for Treatment of Pediatric Pulmonary Hypertension via Nebulization

Oral tadalafil (TD) proved promising in treating pediatric pulmonary arterial hypertension (PAH). However, to ensure higher efficacy and reduce the systemic side effects, targeted delivery to the lungs through nebulization was proposed as an alternative approach. This poorly soluble drug was previously dissolved in nanoemulsions (NEs). However, the formulations could not resist aqueous dilution, which precluded its dilution with saline for nebulization. Thus, the current study aimed to modify the previous systems into dilutable TD-NEs and assess their suitability for a pulmonary application. In this regard, screening of various excipients was conducted to optimize the former systems; different formulations were selected and characterized in terms of physicochemical properties, nebulization performance, stability following sterilization, and biocompatibility. Results showed that the optimal system comprised of Capmul-MCM-EP:Labrafac-lipophile (1:1) (w/w) as oil, Labrasol:Poloxamer-407 (2:1) (w/w) as surfactant mixture (S_mix) and water. The optimum formulation P2_TD resisted aqueous dilution, exhibited reasonable drug loading (2.45 mg/mL) and globule size (25.04 nm), acceptable pH and viscosity for pulmonary administration, and could be aerosolized using a jet nebulizer. Moreover, P2_TD demonstrated stability following sterilization and a favorable safety profile confirmed by both in-vitro and in-vivo toxicity studies. These favorable findings make P2_TD promising for the treatment of pediatric PAH.

Direct and Reverse Pluronic Micelles: Design and Characterization of Promising Drug Delivery Nanosystems

Pluronics are a family of amphiphilic block copolymers broadly explored in the pharmaceutical field. Under certain conditions, Pluronics self-assemble in different structures including nanosized direct and reverse micelles. This review provides an overview about the main parameters affecting the micellization process of Pluronics, such as polymer length, fragments distribution within the chain, solvents, additives and loading of cargo. Furthermore, it offers a guide about the most common techniques used to characterize the structure and properties of the micelles. Finally, it presents up-to-date approaches to improve the stability and drug loading of Pluronic micelles. Special attention is paid to reverse Pluronics and reverse micelles, currently underexplored in the literature. Pluronic micelles present a bright future as drug delivery agents. A smart design and thorough characterization will improve the transfer to clinical applications.

Influence of the Hydrophobicity of Pluronic Micelles Encapsulating Curcumin on the Membrane Permeability and Enhancement of Photoinduced Antibacterial Activity

Apart from its well-known activity as an antimicrobial agent, Curcumin (CURC) has recently started to arouse interest as a photosensitizer in the photodynamic therapy of bacterial infections. The aim of the present study was to evidence the influence of the encapsulation of Curcumin into polymeric micelles on the efficiency of photoinduced microbial inhibition. The influence of the hydrophobicity of the selected Pluronics (P84, P123, and F127) on the encapsulation, stability, and antimicrobial efficiency of CURC-loaded micelles was investigated. In addition, the size, morphology, and drug-loading capacity of the micellar drug delivery systems have been characterized. The influence of the presence of micellar aggregates and unassociated molecules of various Pluronics on the membrane permeability was investigated on both normal and resistant microbial strains of E. coli, S. aureus, and C. albicans. The antimicrobial efficiency on the common pathogens was assessed for CURC-loaded polymeric micelles in dark conditions and activated by blue laser light (470 nm). Significant results in the reduction of the microorganism’s growth were found in cultures of C. albicans, even at very low concentrations of surfactants and Curcumin. Unlike the membrane permeabilization effect of the monomeric solution of Pluronics, reported in the case of tumoral cells, a limited permeabilization effect was found on the studied microorganisms. Encapsulation of the Curcumin in Pluronic P84 and P123 at very low, nontoxic concentrations for photosensitizer and drug-carrier, produced CURC-loaded micelles that prove to be effective in the light-activated inhibition of resistant species of Gram-positive bacteria and fungi.

Self-Emulsifying Phospholipid Preconcentrates for the Enhanced Photoprotection of Luteolin

Exposure to ultraviolet B (UVB) leads to the overproduction of reactive oxygen species (ROS), causing higher risks of skin disorders. Luteolin (Lut) is a naturally occurring antioxidant that can absorb a broad range of ultraviolet light, but its water solubility and skin permeability are limited and insufficient. The aim of the current study was to develop a Lut-loaded self-emulsifying phospholipid preconcentrate (LSEPP) for enhancing the solubility, permeability, and photoprotective activity of Lut. The designed formulations were firstly examined for their droplet size, zeta potential, dispersity, and in vitro corneum permeability after dispensing the preconcentrate to form an emulsion; the optimized formulation was further characterized for its emulsified morphology, compatibility with excipients, stability in the preconcentrate form, and photoprotective activity by the HaCaT cell model under the emulsified status. The optimized LSEPP formulation attained a smaller droplet size (140.6 ± 24.2 nm) with the addition of 1,8-cineole and increased the permeability of Lut by 7-fold. As evidenced in the cell model studies, the optimized LSEPP formulation can efficiently deliver Lut into HaCaT cells after emulsification and result in a 115% better cell viability as well as a 203% stronger ROS scavenging capability, compared with those of unformulated Lut after UVB irradiation. To sum up, we have successfully developed an LSEPP formulation, which is a safe and promising topical delivery system for enhancing the photoprotective effects of Lut.

New Advances in Biomedical Application of Polymeric Micelles

In the last decade, nanomedicine has arisen as an emergent area of medicine, which studies nanometric systems, namely polymeric micelles (PMs), that increase the solubility and the stability of the encapsulated drugs. Furthermore, their application in dermal drug delivery is also relevant. PMs present unique characteristics because of their unique core-shell architecture. They are colloidal dispersions of amphiphilic compounds, which self-assemble in an aqueous medium, giving a structure-type core-shell, with a hydrophobic core (that can encapsulate hydrophobic drugs), and a hydrophilic shell, which works as a stabilizing agent. These features offer PMs adequate steric protection and determine their hydrophilicity, charge, length, and surface density properties. Furthermore, due to their small size, PMs can be absorbed by the intestinal mucosa with the drug, and they transport the drug in the bloodstream until the therapeutic target. Moreover, PMs improve the pharmacokinetic profile of the encapsulated drug, present high load capacity, and are synthesized by a reproducible, easy, and low-cost method. In silico approaches have been explored to improve the physicochemical properties of PMs. Based on this, a computer-aided strategy was developed and validated to enable the delivery of poorly soluble drugs and established critical physicochemical parameters to maximize drug loading, formulation stability, and tumor exposure. Poly(2-oxazoline) (POx)-based PMs display unprecedented high loading concerning water-insoluble drugs and over 60 drugs have been incorporated in POx PMs. Among various stimuli, pH and temperature are the most widely studied for enhanced drug release at the site of action. Researchers are focusing on dual (pH and temperature) responsive PMs for controlled and improved drug release at the site of action. These dual responsive systems are mainly evaluated for cancer therapy as certain malignancies can cause a slight increase in temperature and a decrease in the extracellular pH around the tumor site. This review is a compilation of updated therapeutic applications of PMs, such as PMs that are based on Pluronics^®, micelleplexes and Pox-based PMs in several biomedical applications.

Drug Delivery Systems Based on Pluronic Micelles with Antimicrobial Activity

Bacterial oral diseases are chronic, and, therefore, require appropriate treatment, which involves various forms of administration and dosing of the drug. However, multimicrobial resistance is an increasing issue, which affects the global health system. In the present study, a commercial amphiphilic copolymer, Pluronic F127, was used for the encapsulation of 1-(5′-nitrobenzimidazole-2′-yl-sulphonyl-acetyl)-4-aryl-thiosemicarbazide, which is an original active pharmaceutical ingredient (API) previously synthesized and characterized by our group, at different copolymer/API weight ratios. The obtained micellar systems, with sizes around 20 nm, were stable during 30 days of storage at 4 °C, without a major increase of the Z-average sizes. As expected, the drug encapsulation and loading efficiencies varied with the copolymer/API ratio, the highest values of 84.8 and 11.1%, respectively being determined for the F127/API = 10/1 ratio. Moreover, in vitro biological tests have demonstrated that the obtained polymeric micelles (PMs) are both hemocompatible and cytocompatible. Furthermore, enhanced inhibition zones of 36 and 20 mm were observed for the sample F127/API = 2/1 against S. aureus and E. coli, respectively. Based on these encouraging results, it can be admitted that these micellar systems can be an efficient alternative for the treatment of bacterial oral diseases, being suitable either by injection or by a topical administration.

Recent Advances in Antimicrobial Nano-Drug Delivery Systems

Infectious diseases are among the major health issues of the 21st century. The substantial use of antibiotics over the years has contributed to the dissemination of multidrug resistant bacteria. According to a recent report by the World Health Organization, antibacterial (ATB) drug resistance has been one of the biggest challenges, as well as the development of effective long-term ATBs. Since pathogens quickly adapt and evolve through several strategies, regular ATBs usually may result in temporary or noneffective treatments. Therefore, the demand for new therapies methods, such as nano-drug delivery systems (NDDS), has aroused huge interest due to its potentialities to improve the drug bioavailability and targeting efficiency, including liposomes, nanoemulsions, solid lipid nanoparticles, polymeric nanoparticles, metal nanoparticles, and others. Given the relevance of this subject, this review aims to summarize the progress of recent research in antibacterial therapeutic drugs supported by nanobiotechnological tools.

Rylene Dye-Loaded Polymeric Nanoparticles for Photothermal Eradication of Harmful Dinoflagellates, Akashiwo sanguinea and Alexandrium pacificum

In the era of climate changes, harmful dinoflagellate outbreaks that produce potent algal toxins, odor, and water discoloration in aquatic environments have been increasingly reported. Thus, various treatments have been attempted for the mitigation and management of harmful blooms. Here, we report engineered nanoparticles that consist of two different types of rylene derivatives encapsulated in polymeric micelles. In addition, to avoid dissociation of the aggregate, the core of micelle was stabilized via semi-interpenetrating network (sIPN) formation. On two types of the marine red-tide dinoflagellates, Akashiwo sanguinea and Alexandrium pacificum, the nanoparticle uptake followed by fluorescence labeling and photothermal effect was conducted. Firstly, fluorescence microscopy enabled imaging of the dinoflagellates with the ultraviolet chromophore, Lumogen Violet. Lastly, near-infrared (NIR) laser irradiation was exposed on the Lumogen IR788 nanoparticle-treated Ak. Sanguinea. The irradiation resulted in reduced cell survival due to the photothermal effect in microalgae. The results suggested that the nanoparticle, IR788-sIPN, can be applied for potential red-tide algal elimination.

Masculinizing Effects of Chrysin-Loaded Poloxamer Micelles on Siamese Fighting Fish

Siamese fighting fish (Betta splendens) are freshwater fish that are commonly found in Thailand and other Southeast Asian countries. In the present study, chrysin-loaded polymeric micelles (CPs) were developed and investigated for the masculinizing effects, survival rate, growth indices, and toxicity on Siamese fighting fish. CPs were prepared using a poloxamer. The micelle system of CPs that were formed at a chrysin-to-polymer ratio of 1:2 was found to be the most suitable monodispersed system and exhibited a nanosized diameter (74.2 ± 1.6 nm) with a narrow size distribution (0.288 ± 0.012). In vivo studies were performed using Siamese fighting fish larvae as animal models. In the in vivo toxicity study, the fish larvae were immersed in aqueous systems containing CPs that had five different chrysin concentrations of 1, 10, 100, 1000, and 10,000 ng/mL for 24, 48, and 72 h. Blank polymeric micelles and water were used as controls. The in vivo masculinization effect of CPs with different chrysin concentrations on the fish larvae was evaluated after 5 weeks of exposure. The results demonstrated that CPs with a chrysin concentration of 1000 ng/mL showed a masculinization effect of 94.59 ± 2.76% with a high fish larvae survival rate of 72.45 ± 5.09% and low toxicity. It was concluded that the developed CPs had a significant effect on the sex reversal of Siamese fighting fish larvae with a high survival rate.