Green Synthesized Silver Nanoparticles Using Tridax Procumbens for Topical Application: Excision Wound Model and Histopathological Studies

Investigation of anti-adherence and antimicrobial properties of prodigiosin-functionalized bacterial cellulose membrane for biomedical applications

In this study, novel biomaterial that consisted entirely of bacterial products was developed with the approach of designing cost effective material for biomedical applications. With this aim, bacterial cellulose membranes (BCMs) which synthesized by Komagataeibacter intermedius were produced. Moreover, to impart antimicrobial properties to enhance the capacity of BCMs for biomedical usage, prodigiosin (PG) pigment of Serratia marcescens which presents wide range of antimicrobial activities was loaded to BCMs. Firstly, high yield of PG production was achieved, and then crude pigment was purified with silica gel column. The purified PG was characterized with thin layer chromatography and UV-visible spectrometry. The antimicrobial effect of the produced pigment on Gram-positive and negative bacteria and a yeast was investigated. The success of modification in PG-modified BCMs has been demonstrated by FTIR and SEM. Moreover, antimicrobial and antiadhesive ability of novel PG-BCMs were examined with disc diffusion and plate counting methods. As a result, it was established that PG-BCMs were able to inhibit the growth of all tested microorganisms. Furthermore, excellent antiadhesive effect was observed for the tested microorganisms with the inhibition rates of 82.05-96.25 %. Finally, cytotoxicity test with L929 cell line demonstrated that PG-BCM is biocompatible at a level that can be applied in in vivo studies.

In vitro-in vivo wound healing efficacy of Tridax Procumbens extract loaded Carboxymethylcellulose film

In this work, Tridax Procumbens Extracts (TPE) were blended with Carboxymethylcellulose (CMC), and film was developed through the casting method. The phytochemical screening of the TPE/CMC film was carried out and found the presence of carbohydrates, tannins, saponins, and cardiac glycosides. The presence of elements such as C, O, Na, P, Cl, K, Ca, Mn, and Nb in TP/CMC film was confirmed through EDX. The melting point of the film was found around 291 ± 0.5 °C which was determined through the DSC curve. The maximum tensile strength of the TPE/CMC was found as 14 ± 0.5 MPa. The film showed antibacterial activity against Escherichia coli, Streptococcus pyogenes, Staphylococcus aureus, and Vibrio cholera compared to the control. Cell viability study exhibited 95 % and 98 % cell proliferation for the test film after interacting with the L929 cell line for 18 h and 24 h. The optical contact angle of the TPE/CMC film was also determined. The in-vivo, wound healing studies on adult mice showed healing within 10 days only and the histopathological results revealed the maximum number of fibroblasts with a high density of collagen fibers in the test group indicating that the prepared film can be an effective wound dressing material.

Ulvan/Silver nanoparticle hydrogel films for burn wound dressing

Ulvan is a polysaccharide from green algae that shows good hydrogel film dressing characteristics. Silver nanoparticles (AgNP) can be incorporated into the hydrogel film to improve antibacterial properties and provide a potential burn treatment. In this study, we developed a novel hydrogel film wound dressing composed of ulvan and silver nanoparticles. Two concentrations (0.5 mM and 1 mM) of silver nitrate were used to produce ulvan-silver nanoparticles hydrogel film (UHF-AgNP0.5 and UHF-AgNP1), respectively. The physicochemical characteristics of the hydrogel films were evaluated, including particle size, zeta potential, Fourier transform infrared (FTIR), X-ray diffractometry (XRD), scanning electron microscope and energy-dispersive X-ray (SEM-EDX). Furthermore, the in vitro antimicrobial activity, and second-degree burn wound healing test were evaluated. The UHF-AgNP0.5 showed the highest antimicrobial activity compared to UHF-AgNP1 and UHF film. Meanwhile, an in vivo study using Wistar rats induced second-degree burns showed that UHF-AgNP0.5 significantly accelerated the healing process by regulating the inflammatory process, increasing re-epithelialization, and improving the vascularization process. Ulvan-silver nanoparticle hydrogel films have the ability to accelerate the healing of second-degree burns and are potential candidates for wound dressings.

Design and Evaluation of Solid Lipid Nanoparticles Loaded Topical Gels: Repurpose of Fluoxetine in Diabetic Wound Healing

The current study aimed to prepare a topical gel containing solid lipid nanoparticles (SLNs) encapsulating fluoxetine for diabetic wound healing effects. Fluoxetine (FX) was loaded into SLNs by employing an emulsion solvent evaporation technique using stearic acid as a lipid, and soya lecithin as a surfactant. SLNs were then evaluated for particle size, polydispersity index (PDI), zeta potential (ZP), percent entrapment efficiency (%EE), percent drug loading (%DL), and in vitro drug release. The optimized SLN (FS3) composed of FX (100 mg), SA (150 mg), and SA (100 mg) displayed mean particle size (467.3 ± 2.2nm), PDI (0.435 ± 0.02), ZP (-32.2 ± 4.47mV), EE (95.8 ± 3.38%), and DL (16.4 ± 2.4%). FTIR and DSC studies denote drug-polymer compatibility and the amorphous nature of FX in the SLNs. The drug release at 24 h was found to be (98.89 ± 2.57%) which followed the fickian diffusion mechanism. SLN (FS3) was further loaded into carbopol gel and tested for pH, spreadability, and extrudability of pharmaceutical parameters. In-vitro release of FX from the SLN gel and plain gel was compared, diabetic wound healing gel (DWH) showed sustained drug delivery. An in vivo study was also performed for DWH gel in streptozotocin-induced diabetic rats. Histopathological examination exhibited DWH gel-treated wounds have increased hydroxyproline, cellular proliferation, a rise in the number of blood vessels, and the level of collagen synthesis. Thus, DWH gel-loaded SLN encapsulated with FX could be a potential carrier for the effective treatment and management of diabetic wounds.

Chondroitin sulfate-based composites: a tour d'horizon of their biomedical applications

Chondroitin sulfate (CS), a natural anionic mucopolysaccharide, belonging to the glycosaminoglycan family, acts as the primary element of the extracellular matrix (ECM) of diverse organisms. It comprises repeating units of disaccharides possessing β-1,3-linked N-acetyl galactosamine (GalNAc), and β-1,4-linked D-glucuronic acid (GlcA), and exhibits antitumor, anti-inflammatory, anti-coagulant, anti-oxidant, and anti-thrombogenic activities. It is a naturally acquired bio-macromolecule with beneficial properties, such as biocompatibility, biodegradability, and immensely low toxicity, making it the center of attention in developing biomaterials for various biomedical applications. The authors have discussed the structure, unique properties, and extraction source of CS in the initial section of this review. Further, the current investigations on applications of CS-based composites in various biomedical fields, focusing on delivering active pharmaceutical compounds, tissue engineering, and wound healing, are discussed critically. In addition, the manuscript throws light on preclinical and clinical studies associated with CS composites. A short section on Chondroitinase ABC has also been canvassed. Finally, this review emphasizes the current challenges and prospects of CS in various biomedical fields.

Recent Advances of Chitosan Formulations in Biomedical Applications

Chitosan, a naturally abundant cationic polymer, is chemically composed of cellulose-based biopolymers derived by deacetylating chitin. It offers several attractive characteristics such as renewability, hydrophilicity, biodegradability, biocompatibility, non-toxicity, and a broad spectrum of antimicrobial activity towards gram-positive and gram-negative bacteria as well as fungi, etc., because of which it is receiving immense attention as a biopolymer for a plethora of applications including drug delivery, protective coating materials, food packaging films, wastewater treatment, and so on. Additionally, its structure carries reactive functional groups that enable several reactions and electrochemical interactions at the biomolecular level and improves the chitosan’s physicochemical properties and functionality. This review article highlights the extensive research about the properties, extraction techniques, and recent developments of chitosan-based composites for drug, gene, protein, and vaccine delivery applications. Its versatile applications in tissue engineering and wound healing are also discussed. Finally, the challenges and future perspectives for chitosan in biomedical applications are elucidated.

Antimicrobial Efficacy of Green Synthesized Nanosilver with Entrapped Cinnamaldehyde against Multi-Drug-Resistant Enteroaggregative Escherichia coli in Galleria mellonella

The global emergence of antimicrobial resistance (AMR) needs no emphasis. In this study, the in vitro stability, safety, and antimicrobial efficacy of nanosilver-entrapped cinnamaldehyde (AgC) against multi-drug-resistant (MDR) strains of enteroaggregative Escherichia coli (EAEC) were investigated. Further, the in vivo antibacterial efficacy of AgC against MDR-EAEC was also assessed in Galleria mellonella larval model. In brief, UV-Vis and Fourier transform infrared (FTIR) spectroscopy confirmed effective entrapment of cinnamaldehyde with nanosilver, and the loading efficiency was estimated to be 29.50 ± 0.56%. The AgC was of crystalline form as determined by the X-ray diffractogram with a mono-dispersed spherical morphology of 9.243 ± 1.83 nm in electron microscopy. AgC exhibited a minimum inhibitory concentration (MIC) of 0.008−0.016 mg/mL and a minimum bactericidal concentration (MBC) of 0.008−0.032 mg/mL against MDR- EAEC strains. Furthermore, AgC was stable (high-end temperatures, proteases, cationic salts, pH, and host sera) and tested safe for sheep erythrocytes as well as secondary cell lines (RAW 264.7 and HEp-2) with no negative effects on the commensal gut lactobacilli. in vitro, time-kill assays revealed that MBC levels of AgC could eliminate MDR-EAEC infection in 120 min. In G. mellonella larvae, AgC (MBC values) increased survival, decreased MDR-EAEC counts (p < 0.001), had an enhanced immunomodulatory effect, and was tested safe to the host. These findings infer that entrapment enhanced the efficacy of cinnamaldehyde and AgNPs, overcoming their limitations when used individually, indicating AgC as a promising alternative antimicrobial candidate. However, further investigation in appropriate animal models is required to declare its application against MDR pathogens.

Alginate as a Promising Biopolymer in Drug Delivery and Wound Healing: A Review of the State-of-the-Art

Biopolymeric nanoparticulate systems hold favorable carrier properties for active delivery. The enhancement in the research interest in alginate formulations in biomedical and pharmaceutical research, owing to its biodegradable, biocompatible, and bioadhesive characteristics, reiterates its future use as an efficient drug delivery matrix. Alginates, obtained from natural sources, are the colloidal polysaccharide group, which are water-soluble, non-toxic, and non-irritant. These are linear copolymeric blocks of α-(1→4)-linked l-guluronic acid (G) and β-(1→4)-linked d-mannuronic acid (M) residues. Owing to the monosaccharide sequencing and the enzymatically governed reactions, alginates are well-known as an essential bio-polymer group for multifarious biomedical implementations. Additionally, alginate’s bio-adhesive property makes it significant in the pharmaceutical industry. Alginate has shown immense potential in wound healing and drug delivery applications to date because its gel-forming ability maintains the structural resemblance to the extracellular matrices in tissues and can be altered to perform numerous crucial functions. The initial section of this review will deliver a perception of the extraction source and alginate’s remarkable properties. Furthermore, we have aspired to discuss the current literature on alginate utilization as a biopolymeric carrier for drug delivery through numerous administration routes. Finally, the latest investigations on alginate composite utilization in wound healing are addressed.

Green Synthesis of Silver Nanoparticles Coated by Water Soluble Chitosan and Its Potency as Non-Alcoholic Hand Sanitizer Formulation

The synthesis of silver nanoparticles using plant extracts, widely known as a green synthesis method, has been extensively studied. Nanoparticles produced through this method have applications as antibacterial agents. Bacterial and viral infection can be prevented by use of antibacterial agents such as soap, disinfectants, and hand sanitizer. Silver nanoparticles represent promising hand sanitizer ingredients due to their antibacterial activity and can enable reduced use of alcohol and triclosan. This study employed silver nanoparticles synthesized using Kepok banana peel extract (Musa paradisiaca L.). Nanoparticle effectiveness as a hand sanitizer can be enhanced by coating with a biocompatible polymer such as chitosan. The characterization of silver nanoparticles was conducted using UV-Vis, with an obtained peak at 434.5 nm. SEM-EDX analysis indicated nanoparticles with a spherical morphology. Silver nanoparticles coated with chitosan were characterized through FTIR to verify the attached functional groups. Gel hand sanitizers were produced using silver nanoparticles coated with different chitosan concentrations. Several tests were undertaken to determine the gel characteristics, including pH, syneresis, and antibacterial activity. Syneresis leads to unstable gels, but was found to be inhibited by adding chitosan at a concentration of 2%. Antibacterial activity was found to increase with increase in chitosan concentration.

Green synthesized Ag-nanoparticles using Scutellaria multicaulis stem extract and their selective cytotoxicity against breast cancer

Scutellaria multicaulis is a medicinal herb which has been extensively prescribed in Iranian traditional medicine for treatment of infections, constipation, wounds, and also as medication for anxiety. To evaluate biological activities of biosynthesized silver nanoparticles, silver nanoparticles (Sm-AgNPs) were synthesized using S. multicaulis extract as capping and reducing agent. Characterization studies using UV-vis, XRD, DLS, Zeta potential, FESEM, EDX, TEM, FTIR, RAMAN and TGA assays indicated that Sm-AgNPs had optimal shape, size (∼60 nm) and stability (-46.4 mV) to be used as a drug. Findings also demonstrated that Sm-AgNPs display higher Total Phenolics and Total Flavonoids Content and possesses higher antioxidant activity. HPLC-MSⁿ analysis of constituents in the S. multicaulis stem extract and Sm-AgNPs-free supernatant in negative ion mode showed that flavonoids, mainly jaceidin, skullcapflavon II, wogonin, oroxylin A and dihydroxy, trimethoxyflavone from extract have contributed to the synthesis of Sm-AgNPs. Additionally, Sm-AgNPs demonstrated effective anticarcinogenic properties on MDA-MB231 cells proliferation with IC₅₀ value of 81.2 μg/mL at 48 h by inducing cell apoptosis. Overall, results confirmed the potential role of S. multicaulis stem extract as a potential raw material for synthesis of biologically active Sm-AgNPs, for development of new antitumor agents which could be utilized to combat breast cancer.

Photocatalytic and antibacterial activities of green synthesized Ag doped MgO nanocomposites towards environmental sustainability

The utilization of MgO nanoparticles (NPs) for Photocatalytic and antimicrobial activities has gained lots of attention in recent years. Since silver is an expensive material, it's of interest to check that doping of very small concentration of silver will increase the pollutant degradation efficiency of composites. Here Aloe Vera plant extract was used for synthesis of MgO, Ag NPs and Ag/MgO-nanocomposites (NCs). Green synthesized NPs and NCs were confirmed by using different techniques like UV-Vis, BET, TGA, FTIR, PL, XRD (optical, functional, Thermal, Structural) EDX, TEM, SEM, XPS, EIS and EPR (morphological, elemental, photoelectrical and ROS) studies respectively. Then NPs and NCs were applied for the photocatalytic activity of methylene blue (MB), phenol and antimicrobial studies of E. coli bacteria. Ag/MgO-NCs showed 90.18% dye and 80.67% phenol degradation in 120 min which killed E. Coli pathogenic bacteria in 25 min under solar light irradiations. In disk diffusion methods, it inactivates 24 mm area of bacterial cell growth. Thus, among these green synthesized NPs and NCs, Ag/MgO-NCs exhibited enhanced photocatalytic and antimicrobial activities.

Bacterial cellulose as a potential biopolymer in biomedical applications: a state-of-the-art review

Throughout history, natural biomaterials have benefited society. Nevertheless, in recent years, tailoring natural materials for diverse biomedical applications accompanied with sustainability has become the focus. With the progress in the field of materials science, novel approaches for the production, processing, and functionalization of biomaterials to obtain specific architectures have become achievable. This review highlights an immensely adaptable natural biomaterial, bacterial cellulose (BC). BC is an emerging sustainable biopolymer with immense potential in the biomedical field due to its unique physical properties such as flexibility, high porosity, good water holding capacity, and small size; chemical properties such as high crystallinity, foldability, high purity, high polymerization degree, and easy modification; and biological characteristics such as biodegradability, biocompatibility, excellent biological affinity, and non-biotoxicity. The structure of BC consists of glucose monomer units polymerized via cellulose synthase in β-1-4 glucan chains, creating BC nano fibrillar bundles with a uniaxial orientation. BC-based composites have been extensively investigated for diverse biomedical applications due to their similarity to the extracellular matrix structure. The recent progress in nanotechnology allows the further modification of BC, producing novel BC-based biomaterials for various applications. In this review, we strengthen the existing knowledge on the production of BC and BC composites and their unique properties, and highlight the most recent advances, focusing mainly on the delivery of active pharmaceutical compounds, tissue engineering, and wound healing. Further, we endeavor to present the challenges and prospects for BC-associated composites for their application in the biomedical field.

Development of Apremilast Nanoemulsion-Loaded Chitosan Gels: In Vitro Evaluations and Anti-Inflammatory and Wound Healing Studies on a Rat Model

Apremilast (APL) has profound anti-inflammatory and wound healing activity, alongside other dermal care. This study aims to develop APL-loaded NEs (ANE1-ANE5) using eucalyptus oil (EO) as the oil and Tween-80 and transcutol-HP (THP) as a surfactant and co-surfactant, respectively. The prepared NEs were then evaluated based on mean droplet size (12.63 ± 1.2 nm), PDI (0.269 ± 0.012), ZP (−23.00 ± 5.86), RI (1.315 ± 0.02), and %T (99.89 ± 0.38) and ANE4 was optimized. Further, optimized NEs (ANE4) were incorporated into chitosan gel (2%, w/v). The developed ANE4-loaded chitosan gel was then evaluated for pH, spreadability, in vitro diffusion, and wound healing and anti-inflammatory studies. Moreover, in vivo studies denoted improved anti-inflammatory and wound healing activity and represented a decrease in wound size percentage (99.68 ± 0.345%) for the APNE2 gel test compared to a negative control (86.48 ± 0.87%) and standard control (92.82 ± 0.34%). Thus, the formulation of ANE4-loaded chitosan gels is an efficient topical treatment strategy for inflammatory and wound healing conditions.

Ribociclib-Loaded Ethylcellulose-Based Nanosponges: Formulation, Physicochemical Characterization, and Cytotoxic Potential against Breast Cancer

In the present study, ribociclib-loaded nanosponges (RCNs) composed of ethylcellulose and polyvinyl alcohol were developed using an emulsion-solvent evaporation method. Preliminary evaluations of the developed RCNs (RCN1 to RCN7) were performed in terms of size, polydispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE), and drug loading (DL), which allowed us to select the optimized formulation. RCN3 was selected as the optimized carrier system with particle size ( $363.5\pm 4.8\text{nm}$ ), PDI ( $0.292\pm 0.012$ ), zeta potential ( $-18.5\pm 0.05\text{mV}$ ), EE ( $81.35\pm 1.64\%$ ), and DL ( $21.96\pm 0.28\%$ ). Further, the optimized nanosponges (RCN3) were subjected to FTIR, XRD, DSC, and SEM studies, and results confirmed the proper encapsulation of the drug within the porous polymeric matrix. In vitro drug release studies showed that the drug release was significantly enhanced with a maximum drug release through RCN3 formulation ( $81.85\pm 0.37\%$ ) and followed the Higuchi model. Moreover, the RCN3 system showed greater cytotoxicity than free ribociclib (RC) against MDA-MB-231 and MCF-7 breast cancer cell lines. The percentage of apoptosis induced by RCN3 was found significantly higher than that of free RC ( $p<0.05$ ). Overall, ribociclib-loaded ethylcellulose nanosponges could be a potential nanocarrier to enhance the effectiveness of ribociclib in breast cancer treatment.

Cubosomes as an emerging platform for drug delivery: a state-of-the-art review

Lipid-based drug delivery nanoparticles, including non-lamellar type, mesophasic nanostructured materials of lyotropic liquid crystals (LLCs), have been a topic of interest for researchers for their applications in encapsulation of drugs...