Enhancement and Tunability of Near-Field Radiative Heat Transfer Mediated by Surface Plasmon Polaritons in Thin Plasmonic Films

Long Propagating Polaritonic Heat Transfer: Shaping Radiation to Conduction

Surface phonon polaritons (SPhPs) originate from the coupling of mid-IR photons and optical phonons, generating evanescent waves along the polar dielectric surface. The emergence of SPhPs gives rise to a phase of quantum matter that facilitates long-range energy transfer (100s μm-scale). Albeit of the recent experimental progress to observe the enhanced thermal conductivity of polar dielectric nanostructures mediated by SPhPs, the potential mechanism to present the high thermal conductivity beyond the Landauer limit has not been addressed. Here, we revisit the comprehensive theoretical framework to unify the distinct pictures of two heat transfer mechanisms by conduction and radiation. We first designed our experimental platform to distinguish contributions of two distinct fundamental modes of SPhPs, resulting in far-field radiation and long propagating conduction, respectively, by tuning the configuration of a nanostructured heat channel integrated into the thermometer. We could effectively control the transmission of long-propagating SPhPs to influence the apparent thermal conductivity of the nanostructure. This study reveals the high thermal conductance of 1.63 nW/K by a fast SPhP mode comparable to that by classical phonons, with measurements showing apparent conductivity values of up to 2 W/m·K at 515 K. The origin of the enhanced thermal conductivity was exploited by observing the interference of dispersive evanescent waves by double heat channels. Furthermore, our experimental observations of length-dependent thermal conductance by SPhPs are in good agreement with the revisited Landauer formula to illustrate a polaritonic mode of heat conduction, considering the dispersive nature of radiation not limited to the physical boundaries of a solid object yet directionally guided along the surface.

Nanophotonic Heat Exchanger for Enhanced Near-Field Radiative Heat Transfer

Increasing near-field radiative heat transfer between two bodies separated by a vacuum gap is crucial for enhancing the power density in radiative energy transport and conversion devices. However, the largest radiative heat transfer coefficient between two realistic materials at room temperature is limited to around 2000 W/(m2·K) for a gap of 100 nm. Here, analogous to conventional plate-fin heat exchangers based on convection, we introduce the concept of a nanophotonic heat exchanger, which enhances near-field radiative heat transfer using two bodies with interpenetrating gratings. Our calculations, based on rigorous fluctuational electrodynamics, show that the radiative heat transfer coefficient between the bodies separated by a 100 nm gap can significantly exceed 2000 W/(m2·K) by increasing the aspect ratios of the gratings. We develop a semianalytical heat transfer model that agrees well with the rigorous calculations for design optimization. Our work opens new opportunities for enhancing near-field radiative heat transfer between any materials.

Observation of Near-Field Thermal Radiation between Coplanar Nanodevices with Subwavelength Dimensions

With the continuous advancement of nanotechnology, nanodevices have become crucial components in computing, sensing, and energy conversion applications. The structures of nanodevices typically possess subwavelength dimensions and separations, which pose significant challenges for understanding energy transport phenomena in nanodevices. Here, on the basis of a judiciously designed thermal photonic nanodevice, we report the first measurement of near-field energy transport between two coplanar subwavelength structures over temperature bias up to ∼190 K. Our experimental results demonstrate a 20-fold enhancement in energy transfer beyond blackbody radiation. In contrast with the well-established near-field interactions between two semi-infinite bodies, the subwavelength confinements in nanodevices lead to increased polariton scattering and reduction of supporting photonic modes and, therefore, a lower energy flow at a given separation. Our work unveils exciting opportunities for the rational design of nanodevices, particularly for coplanar near-field energy transport, with important implications for the development of efficient nanodevices for energy harvesting and thermal management.

Transient measurement of near-field thermal radiation between macroscopic objects

The involvement of evanescent waves in the near-field regime could greatly enhance spontaneous thermal radiation, offering a unique opportunity to study nanoscale photon-phonon interaction. However, accurately characterizing this subtle phenomenon is very challenging. This paper proposes a transient all-optical method for rapidly characterizing near-field radiative heat transfer (NFRHT) between macroscopic objects, using the first law of thermodynamics. Significantly, a full measurement at a fixed gap distance is completed within tens of seconds. By simplifying the configuration, the transient all-optical method achieves high measurement accuracy and reliable reproducibility. The proposed method can effectively analyze the NFRHT in various material systems, including SiO2, SiC, and Si, which involve different phonon or plasmon polaritons. Experimental observations demonstrate significant super-Planckian radiation, which arises from the near-field coupling of bounded surface modes. Furthermore, the method achieves excellent agreement with theory, with a minimal discrepancy of less than 2.7% across a wide temperature range. This wireless method could accurately characterize the NFRHT for objects with different sizes or optical properties, enabling the exploration of both fundamental interests and practical applications.

Three-Layered Thin Films for Simultaneous Infrared Camouflage and Radiative Cooling

With the rapid advancements in aerospace technology and infrared detection technology, there are increasing needs for materials with simultaneous infrared camouflage and radiative cooling capabilities. In this study, a three-layered Ge/Ag/Si thin film structure on a titanium alloy TC4 substrate (a widely used skin material for spacecraft) is designed and optimized to achieve such spectral compatibility by combining the transfer matrix method and the genetic algorithm. The structure exhibits a low average emissivity of 0.11 in the atmospheric windows of 3-5 μm and 8-14 μm for infrared camouflage and a high average emissivity of 0.69 in 5-8 μm for radiative cooling. Furthermore, the designed metasurface shows a high degree of robustness regarding the polarization and incidence angle of the incoming electromagnetic wave. The underlying mechanisms allowing for the spectral compatibility of the metasurface can be elucidated as follows: the top Ge layer selectively transmits electromagnetic waves ranging from 5-8 μm while it reflects those in the ranges of 3-5 μm and 8-14 μm. The transmitted electromagnetic waves from the Ge layer are first absorbed by the Ag layer and then localized in the Fabry-Perot resonance cavity formed by Ag layer, Si layer and TC4 substrate. Ag and TC4 make further intrinsic absorptions during the multiple reflections of the localized electromagnetic waves.

Multipole Excitations and Nonlocality in 1d Plasmonic Nanostructures

Efficient simulation methods for taking nonlocal effects in nanostructures into account have been developed, but they are usually computationally expensive or provide little insight into underlying physics. A multipolar expansion approach, among others, holds promise to properly describe electromagnetic interactions in complex nanosystems. Conventionally, the electric dipole dominates in plasmonic nanostructures, while higher order multipoles, especially the magnetic dipole, electric quadrupole, magnetic quadrupole, and electric octopole, can be responsible for many optical phenomena. The higher order multipoles not only result in specific optical resonances, but they are also involved in the cross-multipole coupling, thus giving rise to new effects. In this work, we introduce a simple yet accurate simulation modeling technique, based on the transfer-matrix method, to compute higher-order nonlocal corrections to the effective permittivity of 1d plasmonic periodic nanostructures. In particular, we show how to specify the material parameters and the arrangement of the nanolayers in order to maximize or minimize various nonlocal corrections. The obtained results provide a framework for guiding and interpreting experiments, as well as for designing metamaterials with desired dielectric and optical properties.

Plasmonic metal oxides and their biological applications

Metal oxides modified with dopants and defects are an emerging class of novel materials supporting the localized surface plasmon resonance across a wide range of optical wavelengths, which have attracted tremendous research interest particularly in biological applications in the past decade. Compared to conventional noble metal-based plasmonic materials, plasmonic metal oxides are particularly favored for their cost efficiency, flexible plasmonic properties, and improved biocompatibility, which can be important to accelerate their practical implementation. In this review, we first explicate the origin of plasmonics in dopant/defect-enabled metal oxides and their associated tunable localized surface plasmon resonance through the conventional Mie-Gans model. The research progress of dopant incorporation and defect generation in metal oxide hosts, including both in situ and ex situ approaches, is critically discussed. The implementation of plasmonic metal oxides in biological applications in terms of therapy, imaging, and sensing is summarized, in which the uniqueness of dopant/defect-driven plasmonics for inducing novel functionalities is particularly emphasized. This review may provide insightful guidance for developing next-generation plasmonic devices for human health monitoring, diagnosis and therapy.

Scanning Tunneling Microscopy-Induced Light Emission and I(V) Study of Optical Near-Field Properties of Single Plasmonic Nanoantennas

Electrically driven plasmonic nanoantennas can be integrated as a local source of the optical signal of advanced photonic schemes for on-chip data processing. The inelastic electron tunneling provides the photon generation or launch of surface plasmon waves. This process can be enhanced by the local density of optical states of nanoantennas. In this paper, we used scanning tunnel microscopy-induced light emission to probe the local optoelectronic properties of single gold nanodiscs. The electromagnetic field distribution in the vicinity of plasmonic structures was investigated with high spatial resolution. The obtained photon maps reveal the nonuniform distribution of electromagnetic near-fields, which is consistent with nanoantenna optical modes. Also, the analysis of derived I(V) curves showed a direct correlation between the nanoantenna optical states and the appearance of features on current-voltage characteristics.

Contribution of the acoustic waves to near-field heat transfer

Calculations of the radiative and phonon heat transfer between metals in an extreme near field in presence of electrostatic potential difference are given. Potential difference leads to a coupling between the radiation field and acoustic waves in solid, as a result of which the heat flux between two gold plates associated with p -polarized electromagnetic waves increases by many orders of magnitude as the potential difference varies from 0 to 10 V. The radiative heat transfer is compared with the phonon heat transfer associated with the electrostatic and van der Waals interactions between the surface displacements. For large potential difference and small distances the radiative heat transfer is reduced to the electrostatic phonon heat transfer. A particular case of surface acoustic waves-Rayleigh waves is studied in details. Conditions are obtained for the existence of surface phonon polaritons associated with the interaction of Rayleigh waves with an electromagnetic field. The surface Rayleigh and bulk acoustic waves can give contributions of the same order. The obtained results can be used to control heat fluxes at the nanoscale using the potential difference and to create coherent radiation sources based on the properties of the Rayleigh waves.

Modulation of near-field radiative heat transfer between graphene sheets by strain engineering

In this article, we study the near-field radiative heat transfer (NFRHT) between two graphene sheets under mechanical strain. The modulation of NFRHT due to the strain modulus and stretching direction is investigated under two types of strain configurations. For the first type, one graphene sheet is strained whereas the other one is unstrained. It is found that the spectra of NFRHT undergo a redshift and the magnitudes drop remarkably as the strain modulus increases. For the second type of configuration, two graphene sheets have the same strain modulus while the stretching direction could be arbitrary. It is found that the differences in stretching directions lead to the mismatch of anisotropic plasmonic modes. Under proper choices of stretching directions, a large modulation with the reduction of heat transfer coefficient over 60% is possible for strain modulus 0.2. Our findings may have promising applications in thermal management for micro/nano-electromechanical devices.

Microscale heat transfer and thermal extinction of a wire-grid polarizer

We explore heat transfer and thermal characteristics of a wire-grid polarizer (WGP) on a microscale by investigating the effect of various geometrical parameters such as wire-grid period, height, and a fill factor. The thermal properties arise from heat transfer by light absorption and conduction in wire-grids. Fill factor was found to be the most dominant geometrical parameter. For TM polarized light, a higher fill factor with thicker wire-grids increased the temperature. The local temperature was found to rise up to T_max = 354.5 K. TE polarization tended to produce lower temperature. Thermal extinction due to polarimetric extinction by a WGP was also evaluated and highest extinction was observed to be 4.78 dB, which represents a temperature difference ΔT = 54.3 °C. We expect the results to be useful for WGPs in polarization-sensitive thermal switching applications.

Localized Surface Plasmon Resonance in Semiconductor Nanocrystals

Localized surface plasmon resonance (LSPR) in semiconductor nanocrystals (NCs) that results in resonant absorption, scattering, and near field enhancement around the NC can be tuned across a wide optical spectral range from visible to far-infrared by synthetically varying doping level, and post synthetically via chemical oxidation and reduction, photochemical control, and electrochemical control. In this review, we will discuss the fundamental electromagnetic dynamics governing light matter interaction in plasmonic semiconductor NCs and the realization of various distinctive physical properties made possible by the advancement of colloidal synthesis routes to such NCs. Here, we will illustrate how free carrier dielectric properties are induced in various semiconductor materials including metal oxides, metal chalcogenides, metal nitrides, silicon, and other materials. We will highlight the applicability and limitations of the Drude model as applied to semiconductors considering the complex band structures and crystal structures that predominate and quantum effects that emerge at nonclassical sizes. We will also emphasize the impact of dopant hybridization with bands of the host lattice as well as the interplay of shape and crystal structure in determining the LSPR characteristics of semiconductor NCs. To illustrate the discussion regarding both physical and synthetic aspects of LSPR-active NCs, we will focus on metal oxides with substantial consideration also of copper chalcogenide NCs, with select examples drawn from the literature on other doped semiconductor materials. Furthermore, we will discuss the promise that LSPR in doped semiconductor NCs holds for a wide range of applications such as infrared spectroscopy, energy-saving technologies like smart windows and waste heat management, biomedical applications including therapy and imaging, and optical applications like two photon upconversion, enhanced luminesence, and infrared metasurfaces.

Entropic and Near-Field Improvements of Thermoradiative Cells

A p-n junction maintained at above ambient temperature can work as a heat engine, converting some of the supplied heat into electricity and rejecting entropy by interband emission. Such thermoradiative cells have potential to harvest low-grade heat into electricity. By analyzing the entropy content of different spectral components of thermal radiation, we identify an approach to increase the efficiency of thermoradiative cells via spectrally selecting long-wavelength photons for radiative exchange. Furthermore, we predict that the near-field photon extraction by coupling photons generated from interband electronic transition to phonon polariton modes on the surface of a heat sink can increase the conversion efficiency as well as the power generation density, providing more opportunities to efficiently utilize terrestrial emission for clean energy. An ideal InSb thermoradiative cell can achieve a maximum efficiency and power density up to 20.4% and 327 Wm⁻², respectively, between a hot source at 500 K and a cold sink at 300 K. However, sub-bandgap and non-radiative losses will significantly degrade the cell performance.

Strong modulation of plasmons in Graphene with the use of an Inverted pyramid array diffraction grating

An optical device configuration allowing efficient electrical tuning of surface plasmon wavelength and absorption in a suspended/conformal graphene film is reported. An underlying 2-dimensional array of inverted rectangular pyramids greatly enhances optical coupling to the graphene film. In contrast to devices utilising 1D grating or Kretchman prism coupling configurations, both s and p polarization can excite plasmons due to symmetry of the grating structure. Additionally, the excited high frequency plasmon mode has a wavelength independent of incident photon angle allowing multidirectional coupling. By combining analytical methods with Rigorous Coupled-Wave Analysis, absorption of plasmons is mapped over near infrared spectral range as a function of chemical potential. Strong control over both plasmon wavelength and strength is provided by an ionic gel gate configuration. 0.04eV change in chemical potential increases plasmon energy by 0.05 eV shifting plasmon wavelength towards the visible, and providing enhancement in plasmon absorption. Most importantly, plasmon excitation can be dynamically switched off by lowering the chemical potential and moving from the intra-band to the inter-band transition region. Ability to electrically tune plasmon properties can be utilized in applications such as on-chip light modulation, photonic logic gates, optical interconnect and sensing applications.

Control of radiative processes for energy conversion and harvesting

We review recent advances in the fundamental understanding and technological applications of radiative processes for energy harvesting, conversion, efficiency, and sustainability. State-of-the-art and remaining challenges are discussed, together with the latest developments outlined in the papers comprising this focus issue. The topics range from the fundamentals of the thermal emission manipulation in the far and near field, to applications in radiative cooling, thermophotovoltaics, thermal rectification, and novel approaches to photon detection and conversion.