Influences of Hyperbranched Polyester Modification on the Crystallization Kinetics of Isotactic Polypropylene/Graphene Oxide Composites

Polycaprolactone composite films infused with hyperbranched polyester/reduced graphene oxide: influence on biodegradability, gas/water transport and antimicrobial properties for sustainable packaging

Biodegradable polymers have gained great interest as ecofriendly packaging materials. However, addition of suitable fillers to the polymer matrix enhances their barrier and mechanical properties besides gaining new features such as bactericidal activity. This work deals with investigation of mechanical, gas/water transport properties and biodegradability performance of films based on polycaprolactone (PCL) reinforced by 1wt% of reduced graphene oxide (RGO) or modified graphene (mRG). To achieve this goal, nanosheets of RGO were firstly prepared then their surfaces were modified through in situ polymerization of hyperbranched polyester (PES) to obtain mRG. Then PCL was loaded with both fillers, and the nanocomposite films were prepared by a casting technique. Studying of the thermal properties of the films showed that the addition of RGO or mRG had no influence on the crystallinity of the PCL matrix. Although the mechanical characteristics of the PCL did not change when either filler was added, there was an increase in permeability and diffusivity in the presence of the fillers regardless of their composition. Nevertheless, the nanocomposites demonstrated antimicrobial properties against S. aureus and E. coli as models for Gram-positive and Gram-negative bacteria, respectively. The biodegradability test performed on the prepared film PCL, and those containing 1% of the filler, PCL/RGO, and PCL/mRG, emphasized that the film degradation became pronounced after three months for all samples.

Crystallization Kinetics of Modified Nanocellulose/Monomer Casting Nylon Composites

Polyisocyanate and caprolactone were used to chemically functionalize nanocellulose (CNF). Composites of CNF, caprolactone-modified nanocellulose (CNF-CL) and polyisocyanate-modified nanocellulose (CNF-JQ)/MC nylon were fabricated by anionic ring-opening polymerization. The effects of the crystal structure, crystal morphology and crystallization process of MC nylon composites have been characterized by wide-angle X-ray diffraction (WAXD), polarized optical microscopy(POM) and differential scanning calorimetry (DSC). Isothermal crystallization kinetics were analyzed using the Avrami equation, and the crystallization rate, half-time, and Avrami exponent were calculated. The results show that the nucleation effects of CNF-JQ/MC nylon composites is increased with the CNF-JQ increase, and it is best compared with MC nylon, CNF/MC nylon and CNF-CL/MC nylon composites, so CNF-JQ can play the role of effective nucleating agent in MC nylon. We also discussed the non-isothermal crystallization of the composites. Analysis of the Jeziorny and Mo model demonstrates that the Zc values of CNF, CNF-CL, CNF-JQ/MC nylon composites increase, and the F(T) values decrease in order. This indicates that CNF-JQ can better promote the crystallization rate of non-isothermal crystallization of MC nylon. The results of this work demonstrate that CNF-JQ can be an effective nucleation agent and increase the crystallization rate of MC nylon compared with CNF-CL. The activation energy of the composites was studied using the kissing method, and the results showed that CNF-CL decreased the activation energy of MC nylon, and CNF and CNF-JQ increased the activation energy of MC nylon.

Thermal Fractionation of Polyolefins: Brief History, New Developments and Future Perspective

Abstract

For semi-crystalline polymer materials, the difference in chain structure often leads to different physical properties; therefore, in-depth analysis of the chain structure is of great significance. With the continuous development of advanced instruments, many research means have emerged to characterize the structure of molecular chains. Among them, fractionation techniques provide effectively structural information on inter- and intra-molecular comonomer distribution, branching degree, and sequence length, etc. This work briefly presents the history of developments of various classical fractionation means such as temperature-rising elution fractionation, stepwise crystallization and successive self-nucleation and annealing, while focusing on the present and future of their applications.

Hyperbranched polyamide modified graphene oxide-reinforced polyurethane nanocomposites with enhanced mechanical properties

As is well known, it is difficult to simultaneously improve both the strength and elongation at break of polymers filled with nanomaterials. This work obtained high-performance composites with enhanced strength and elongation at break via cross-linking hydroxyl-terminated polybutadiene (HTPB) chains with hyperbranched-polyamide-modified graphene oxide (HGO), and the preparation, characterization, and mechanical properties of the composites serving as a composite solid-propellant binder have been described in detail. Compared with pure HTPB polyurethane (P-HTPB), the tensile strength and elastic modulus of the composite containing 0.1 wt% HGO (H-0.1/HTPB) increase by 57.8% and 65.3%, respectively. Notably, the elongation at break of the H-0.1/HTPB composite can reach up to 1292.6%, which is even higher than that of P-HTPB. Moreover, the capabilities of the composites to resist deformation have also been enhanced significantly. The glass transition temperatures of the composites are still extremely low (∼-73 °C), which is beneficial for their applications. It can be expected that this study can provide an effective fabrication approach and strategy for preparing high-performance polyurethane composites.

Investigation on the Effect of Hyperbranched Polyester Grafted Graphene Oxide on the Crystallization Behaviors of β-Nucleated Isotactic Polypropylene

In this article, hyperbranched polyester grafted graphene oxide (GO) was successfully prepared. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM) were performed for its characterizations. On the other hand, differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) were also performed to study its influences on non-isothermal crystallization behaviors of β-nucleated isotactic polypropylene (β-iPP). The grafting ratios of hyperbranched polyester with different supermolecular structures were calculated to be 19.8-24.0 wt %, which increase with the degree of branching. The results showed that the grafting of hyperbranched polyester was advantageous in increasing the crystallization peak temperature Tp and decreasing the crystallization activation energy ΔE of β-iPP/GO composites, which contributed to the iPP's crystallization process. Moreover, under all cooling rates (2, 5, 10, 20, 40 °C/min), crystallinities of β-iPP/GO were greatly improved after being grafted with hyperbranched polyester, because of the increase of the relative contents of α-phase αc and the average α-crystal sizes.

Influence of Organo-Sepiolite on the Morphological, Mechanical, and Rheological Properties of PP/ABS Blends

To improve the poor impact toughness of polypropylene (PP), organo-sepiolite (O-Sep) filled 80/20 (w/w) polypropylene/poly(acrylonitrile-butadiene-styrene) (PP/ABS) nanocomposites were fabricated. The contents of O-Sep were correlated with the morphological, mechanical, and rheological behavior of PP/ABS/O-Sep blends. Scanning electron microscopy (SEM) was applied to study the morphology and thermogravimetric analysis (TGA) was applied to study the thermal stability. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) were applied to study the crystallinity. The obtained results show that O-Sep enhanced the dispersion of ABS in the PP matrix and increased the crystallinity of blends. The rheological results show that O-Sep could increase the viscosity, storage modulus, and loss modulus of blends. Moreover, the mechanical behavior shows that O-Sep (at proper content) simultaneously increased the tensile modulus, flexural modulus, and impact strength of PP/ABS/O-Sep blends.