Complementary Assessment of Commercial Photoluminescent Pigments Printed on Cotton Fabric

Achieving Record-High Stretchability and Mechanical Stability in Organic Photovoltaic Blends with a Dilute-absorber Strategy

Organic solar cells (OSCs) have potential for applications in wearable electronics. Except for high power conversion efficiency (PCE), excellent tensile properties and mechanical stability are required for achieving high-performance wearable OSCs, while the present metrics barely meet the stretchable requirements. Herein, this work proposes a facile and low-cost strategy for constructing intrinsically stretchable OSCs by introducing a readily accessible polymer elastomer as a diluent for all-polymer photovoltaic blends. Remarkably, record-high stretchability with a fracture strain of up to 1000% and mechanical stability with elastic recovery >90% under cyclic tensile tests are realized in the OSCs active layers for the first time. Specifically, the tensile properties of best-performing all-polymer photovoltaic blends are increased by up to 250 times after blending. Previously unattainable performance metrics (fracture strain >50% and PCE >10%) are achieved simultaneously for the resulting photovoltaic films. Furthermore, an overall evaluation parameter y is proposed for the efficiency-cost- stretchability balance of photovoltaic blend films. The y value of dilute-absorber system is two orders of magnitude greater than those of prior state-of-the-art systems. Additionally, intrinsically stretchable devices are prepared to showcase the mechanical stability. Overall, this work offers a new avenue for constructing and comprehensively evaluating intrinsically stretchable organic electronic films.

Fabrication of Polysaccharide-Based Halochromic Nanofibers via Needle-Less Electrospinning and Their Characterization: A Study of the Leaching Effect

Responsive materials, i.e., smart materials, have the ability to change their physical or chemical properties upon certain external signals. The development of nanofibrous halochromic materials, specifically combining the pH-sensitive functionality and unique nanofiber properties, could yield interesting new applications, especially when the common problem of dye leaching is successfully tackled. Therefore, in this article, we studied the fabrication process of polysaccharide-based halochromic nanofibrous materials by using a combination of various halochromic dyes (bromothymol blue, bromocresol green, and thymol blue) and cellulose acetate in a spinning solution using a one-pot strategy. The inhibition of leaching was addressed by using a complexing agent: poly-diallyl-dimethylammonium chloride (PDADMAC). The preparation of hybrid spinning solutions, their characterization, and ability to form continuous nanofibers were studied using a high production needle-less electrospinning system. The produced hybrid solutions and nanofibers were characterized, in terms of their rheological properties, chemical structure, morphology, and functionality. Fabricated nanofibrous halochromic structures show a clear color change upon exposure to different pH values, as well as the reduced leaching of dyes, upon the addition of a complexing agent. The leaching decreased by 61% in the case of bromocresol green, while, in the case of bromothymol blue and thymol blue, the leaching was reduced by 95 and 99%, respectively.

Glow-in-the-Dark Patterned PET Nonwoven Using Air-Atmospheric Plasma Treatment and Vitamin B2-Derivative (FMN)

Flavin mononucleotide (FMN) derived from Vitamin B2, a bio-based fluorescent water-soluble molecule with visible yellow-green fluorescence, has been used in the scope of producing photoluminescent and glow-in-the-dark patterned polyester (PET) nonwoven panels. Since the FMN molecule cannot diffuse inside the PET fiber, screen printing, coating, and padding methods were used in an attempt to immobilize FMN molecules at the PET fiber surface of a nonwoven, using various biopolymers such as gelatin and sodium alginate as well as a water-based commercial polyacrylate. In parallel, air atmospheric plasma activation of PET nonwoven was carried for improved spreading and adhesion of FMN bearing biopolymer/polymer mixture. Effectively, the plasma treatment yielded a more hydrophilic PET nonwoven, reduction in wettability, and surface roughness of the plasma treated fiber with reduced water contact angle and increased capillary uptake were observed. The standard techniques of morphological properties were explored by a scanning electron microscope (SEM) and atomic force microscopy (AFM). Films combining each biopolymer and FMN were formed on PS (polystyrene) Petri-dishes. However, only the gelatin and polyacrylate allowed the yellow-green fluorescence of FMN molecule to be maintained on the film and PET fabric (seen under ultraviolet (UV) light). No yellow-green fluorescence of FMN was observed with sodium alginate. Thus, when the plasma-activated PET was coated with the gelatin mixture or polyacrylate bearing FMN, the intense photoluminescent yellow-green glowing polyester nonwoven panel was obtained in the presence of UV light (370 nm). Screen printing of FMN using a gelatin mixture was possible. The biopolymer exhibited appropriate viscosity and rheological behavior, thus creating a glow-in-the-dark pattern on the polyester nonwoven, with the possibility of one expression in daylight and another in darkness (in presence of UV light). A bio-based natural product such as FMN is potentially an interesting photoluminescent molecule with which textile surface pattern designers may create light-emitting textiles and interesting aesthetic expressions.

Preparation and Characterization of Self-Dispersing Phthalocyanine Blue 15:4 Pigment for Dyeing of Wool Textiles

A self-dispersing pigment was produced by a diazonium coupling reaction; the pigment reacted with aromatic diazonium salts which were generated by the reaction of p-aminobenzene sulfonic acid and sodium nitrite. The surface of the pigment particles was negatively charged due to sulfonic acid groups on the pigment surface. The pigment particle size and zeta potential were, respectively, 134.5 nm and −45.4 mV at neutral pH. The wool surface was positively charged by adjusting the pH; then the anionic self-dispersing pigment dyed the cationic wool. The results show that self-dispersing pigment can adhere well without a binder, and that the K/S value is closely related to pH, dyeing time, and the amount of pigment. The color fastness of the wool was good and the light fastness of the wool was grade 5, which is better than acid dyes. Self-dispersing pigments are potential candidates for dyeing high-weather-resistance textiles.