1
|
Njom AE, Voufo J, Segovia C, Konai N, Mewoli A, Tapsia LK, Meva'a JRL, Pizzi A. Characterization of a composite based on Cissus dinklagei tannin resin. Heliyon 2024; 10:e25582. [PMID: 38370179 PMCID: PMC10867651 DOI: 10.1016/j.heliyon.2024.e25582] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2023] [Revised: 01/27/2024] [Accepted: 01/30/2024] [Indexed: 02/20/2024] Open
Abstract
The tannin extract of Cissus dinklagei was used in the preparation of a 3 % paraformaldehyde resin for the manufacture of particleboard. This tannin is of the procyanidin type associated with furan residues. The modulus of elasticity of the resin obtained after the thermomechanical analysis is 3825 MPa. The TGA performed on the panels obtained shows three degradation zones with a thermal stability zone between 74 and 210 °C. These panels have good thermomechanical properties. The values of the best density, internal bond, modulus of elasticity in flexion (MOE) and resistance to flexion (MOR) are respectively 658 kg/m3; 0.52 MPa; 2035.4 MPa; 16.3 MPa. These results classify this panel for generalinterior construction and furniture uses according to the NF EN 312 standard.
Collapse
Affiliation(s)
- Abel Emmanuel Njom
- Department of Mechanical Engineering, ENSET, University of Douala, P.O Box 1872, Douala, Cameroon
- Laboratory of Engineering Civil and Mechanical, National Advanced School of Engineering, University of Yaoundé 1, P.O Box 8390, Yaoundé, Cameroon
- Laboratory of Mechanics, University of Douala, P.O Box 1872, Douala, Cameroon
| | - Joseph Voufo
- Laboratory of Engineering Civil and Mechanical, National Advanced School of Engineering, University of Yaoundé 1, P.O Box 8390, Yaoundé, Cameroon
| | - Cesar Segovia
- CETELOR, University of Lorraine, 27 rue Philippe Seguin, P.O Box 88051, Epinal, Cedex9, France
| | - Noël Konai
- Laboratory of Engineering Civil and Mechanical, National Advanced School of Engineering, University of Yaoundé 1, P.O Box 8390, Yaoundé, Cameroon
| | - Armel Mewoli
- Department of Mechanical Engineering, ENSET, University of Douala, P.O Box 1872, Douala, Cameroon
- Groupe de Recherche des Matériaux Innovants (GRMI), ENSET, Université of Douala, P.O Box 1872, Douala, Cameroon
| | - Leonnel Karga Tapsia
- Department of Mechanical Petroleum and Gas Engineering, National Advanced School of Mines and Petroleum Industries of the University of Maroua, PO BOX 08, Kaélé, Cameroon
| | - Jean Raymond Lucien Meva'a
- Laboratory of Engineering Civil and Mechanical, National Advanced School of Engineering, University of Yaoundé 1, P.O Box 8390, Yaoundé, Cameroon
| | - Antonio Pizzi
- LERMAB-ENSTIB, University of Lorraine, 27 rue Philippe Seguin, BP 1041, 88051, Epinal, France
| |
Collapse
|
2
|
Mangal M, H S, Bose S, Banerjee T. Innovations in applications and prospects of non-isocyanate polyurethane bioplastics. Biopolymers 2023; 114:e23568. [PMID: 37846654 DOI: 10.1002/bip.23568] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/18/2023] [Revised: 09/22/2023] [Accepted: 09/28/2023] [Indexed: 10/18/2023]
Abstract
Currently, conventional plastics are necessary for a variety of aspects of modern daily life, including applications in the fields of healthcare, technology, and construction. However, they could also contain potentially hazardous compounds like isocyanates, whose degradation has a negative impact on both the environment and human health. Therefore, researchers are exploring alternatives to plastic which is sustainable and environmentally friendly without compromising its mechanical and physical features. This review study highlights the production of highly eco-friendly bioplastic as an efficient alternative to non-biodegradable conventional plastic. Bioplastics are produced from various renewable biomass sources such as plant debris, fatty acids, and oils. Poly-addition of di-isocyanates and polyols is a technique employed over decades to produce polyurethanes (PUs) bioplastics from renewable biomass feedstock. The toxicity of isocyanates is a major concern with the above-mentioned approach. Novel green synthetic approaches for polyurethanes without using isocyanates have been attracting greater interest in recent years to overcome the toxicity of isocyanate-containing raw materials. The polyaddition of cyclic carbonates (CCs) and polyfunctional amines appears to be the most promising method to obtain non-isocyanate polyurethanes (NIPUs). This method results in the creation of polymeric materials with distinctive and adaptable features with the elimination of harmful compounds. Consequently, non-isocyanate polyurethanes represent a new class of green polymeric materials. In this review study, we have discussed the possibility of creating novel NIPUs from renewable feedstocks in the context of the growing demand for efficient and ecologically friendly plastic products.
Collapse
Affiliation(s)
- Mangal Mangal
- Department of Chemical Engineering, Indian Institute of Technology, Guwahati, Assam, India
| | - Supriya H
- Department of Materials Engineering, Indian Institute of Science, Bengaluru, India
| | - Suryasarathi Bose
- Department of Materials Engineering, Indian Institute of Science, Bengaluru, India
| | - Tamal Banerjee
- Department of Chemical Engineering, Indian Institute of Technology, Guwahati, Assam, India
| |
Collapse
|
3
|
Iswanto AH, Lubis MAR, Sutiawan J, Al-Edrus SSO, Lee SH, Antov P, Kristak L, Reh R, Mardawati E, Santoso A, Kusumah SS. Latest Advancements in the Development of High-Performance Lignin- and Tannin-Based Non-Isocyanate Polyurethane Adhesive for Wood Composites. Polymers (Basel) 2023; 15:3864. [PMID: 37835913 PMCID: PMC10575091 DOI: 10.3390/polym15193864] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/08/2023] [Revised: 09/11/2023] [Accepted: 09/18/2023] [Indexed: 10/15/2023] Open
Abstract
The depletion of natural resources and increasing environmental apprehension regarding the reduction of harmful isocyanates employed in manufacturing polyurethanes (PUs) have generated significant attention from both industrial and academic sectors. This attention is focused on advancing bio-based non-isocyanate polyurethane (NIPU) resins as viable and sustainable substitutes, possessing satisfactory properties. This review presents a comprehensive analysis of the progress made in developing bio-based NIPU polymers for wood adhesive applications. The main aim of this paper is to conduct a comprehensive analysis of the latest advancements in the production of high-performance bio-based NIPU resins derived from lignin and tannin for wood composites. A comprehensive evaluation was conducted on scholarly publications retrieved from the Scopus database, encompassing the period from January 2010 to April 2023. In NIPU adhesive manufacturing, the exploration of substitute materials for isocyanates is imperative, due to their inherent toxicity, high cost, and limited availability. The process of demethylation and carbonation of lignin and tannin has the potential to produce polyphenolic compounds that possess hydroxyl and carbonyl functional groups. Bio-based NIPUs can be synthesized through the reaction involving diamine molecules. Previous studies have provided evidence indicating that NIPUs derived from lignin and tannin exhibit enhanced mechanical properties, decreased curing temperatures and shortened pressing durations, and are devoid of isocyanates. The characterization of NIPU adhesives based on lignin and tannin was conducted using various analytical techniques, including Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), matrix-assisted laser desorption/ionization with time-of-flight (MALDI-TOF) mass spectrometry, and gel permeation chromatography (GPC). The adhesive performance of tannin-based NIPU resins was shown to be superior to that of lignin-based NIPUs. This paper elucidates the potential of lignin and tannin as alternate sources for polyols in the manufacturing of NIPUs, specifically for their application as wood adhesives.
Collapse
Affiliation(s)
- Apri Heri Iswanto
- Department of Forest Product, Faculty of Forestry, Universitas Sumatera Utara, Medan 20155, Indonesia;
| | - Muhammad Adly Rahandi Lubis
- Research Center for Biomass and Bioproducts, National Research and Innovation Agency, Cibinong 16911, Indonesia; (M.A.R.L.); (A.S.); (S.S.K.)
- Research Collaboration Center for Biomass and Biorefinery between BRIN and Universitas Padjadjaran, National Research and Innovation Agency, Bandung 40600, Indonesia;
| | - Jajang Sutiawan
- Department of Forest Product, Faculty of Forestry, Universitas Sumatera Utara, Medan 20155, Indonesia;
- Research Center for Biomass and Bioproducts, National Research and Innovation Agency, Cibinong 16911, Indonesia; (M.A.R.L.); (A.S.); (S.S.K.)
| | | | - Seng Hua Lee
- Department of Wood Industry, Faculty of Applied Sciences, Universiti Teknologi MARA (UiTM), Kampus Jengka, Pahang 26400, Malaysia;
| | - Petar Antov
- Faculty of Forest Industry, University of Forestry, 1797 Sofia, Bulgaria;
| | - Lubos Kristak
- Faculty of Wood Sciences and Technology, Technical University in Zvolen, 96001 Zvolen, Slovakia; (L.K.); (R.R.)
| | - Roman Reh
- Faculty of Wood Sciences and Technology, Technical University in Zvolen, 96001 Zvolen, Slovakia; (L.K.); (R.R.)
| | - Efri Mardawati
- Research Collaboration Center for Biomass and Biorefinery between BRIN and Universitas Padjadjaran, National Research and Innovation Agency, Bandung 40600, Indonesia;
- Department of Agro-Industrial Technology, Universitas Padjadjaran, Jatinangor 40600, Indonesia
| | - Adi Santoso
- Research Center for Biomass and Bioproducts, National Research and Innovation Agency, Cibinong 16911, Indonesia; (M.A.R.L.); (A.S.); (S.S.K.)
| | - Sukma Surya Kusumah
- Research Center for Biomass and Bioproducts, National Research and Innovation Agency, Cibinong 16911, Indonesia; (M.A.R.L.); (A.S.); (S.S.K.)
| |
Collapse
|
4
|
Abstract
Polyurethane (PU) foams are produced from toxic, petrochemical- and phosgene-derived isocyanates. Although nonisocyanate polyurethane (NIPU) has shown promise as a replacement for traditional PU, the synthesis of NIPU foams has not been widely studied due to the difficulties in replicating the foaming process of PU, in situ CO2 production through the hydrolysis of isocyanates. Hereby, we report the synthesis of amine-CO2 adducts and their CO2 adsorption-desorption characteristics under different conditions. The results show that the amine-CO2 adducts can exhibit up to 87% CO2 desorption at 60 °C after aminolysis with cyclic carbonate. The amine-CO2 adduct is used as both a foaming agent and a comonomer to obtain low-density foams (0.203-0.239 g·cm-3) after heating at 50-60 °C for 24-48 h. This marks the successful synthesis of in situ CO2-blown NIPU foams using an amine-CO2 adduct.
Collapse
Affiliation(s)
- Ping Sen Choong
- Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), Agency for Science, Technology and Research (A*STAR), 1 Pesek Road, Singapore 627833, Republic of Singapore
| | - Yen Li Eunice Hui
- Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), Agency for Science, Technology and Research (A*STAR), 1 Pesek Road, Singapore 627833, Republic of Singapore
| | - Chen Chuan Lim
- Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), Agency for Science, Technology and Research (A*STAR), 1 Pesek Road, Singapore 627833, Republic of Singapore
| |
Collapse
|
5
|
Influence of Phosphorus Structures and Their Oxidation States on Flame-Retardant Properties of Polyhydroxyurethanes. MOLECULES (BASEL, SWITZERLAND) 2023; 28:molecules28020611. [PMID: 36677667 PMCID: PMC9867530 DOI: 10.3390/molecules28020611] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/21/2022] [Revised: 01/03/2023] [Accepted: 01/04/2023] [Indexed: 01/11/2023]
Abstract
This article focuses on the synthesis of polyhydroxyurethane (PHU) materials containing novel phosphorus flame retardants (FR). Four different phosphorus compounds were grafted onto cyclic carbonate: 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), diethyl phosphite (DEP), diphenyl phosphite (DPP) and dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (BPPO). Thus, three novel phosphorus reactive cyclic carbonates which have never been reported so far were synthetized. Phosphorus FR containing PHU materials were characterized by FTIR to evidence the total conversion of the cyclic carbonate. Moreover, the gel contents up to 80% confirmed the formation of the polymer network. Then, the thermal stability and the flame-retardant properties were investigated by thermogravimetric analyses, cone calorimeter and pyrolysis combustion flow calorimeter. The mode of action of phosphorus compounds, depending on the oxidation state, was especially highlighted. Phosphonate (+III) provided better action in a condensed phase than phosphinate thanks to a more efficient char formation. Among phosphonates, differences were observed in terms of char-formation rate and expansion. DEP provided the best flame-retardant properties, with a reduction of 76% of pHRR with 2 wt% of phosphorus in cone calorimeter analysis. Therefore, this article highlighted the different modes of action of phosphorus flame retardants, depending on the oxidation state of phosphorus, in PHU materials.
Collapse
|
6
|
Valette V, Kébir N, Tiavarison FB, Burel F, Lecamp L. Preparation of flexible biobased non-isocyanate polyurethane (NIPU) foams using the transurethanization approach. REACT FUNCT POLYM 2022. [DOI: 10.1016/j.reactfunctpolym.2022.105416] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/07/2022]
|
7
|
Non-Isocyanate Polyurethane Bio-Foam with Inherent Heat and Fire Resistance. Polymers (Basel) 2022; 14:polym14225019. [PMID: 36433146 PMCID: PMC9697988 DOI: 10.3390/polym14225019] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/21/2022] [Revised: 11/11/2022] [Accepted: 11/17/2022] [Indexed: 11/22/2022] Open
Abstract
Polyurethanes (PUs) are versatile and widespread, particularly as flexible and rigid foams. To avoid isocyanates and other toxic reagents required for synthesis, such as phosgene, alternative synthetic routes have been utilized to produce non-isocyanate polyurethanes (NIPUs). A thermally and flame-resistant rigid NIPU was produced from environmentally benign and bio-sourced ingredients, requiring no catalyst or solvents. A foamed structure was obtained by the addition of glutaraldehyde and four different carboxylic acids: malic acid, maleic acid, citric acid, and aconitic acid. The resulting morphology, thermal degradation, and flame resistance of each foam were compared. The properties vary with each carboxylic acid used, but in each case, peak thermal degradation and peak heat release are postponed by >100 °C compared to commercial rigid PU foam. Furthermore, in a butane torch test, NIPU foams exhibit an 80% higher remaining mass and a 75% reduction in afterburn time, compared to commercial polyurethane. This bio-based polyurethane eliminates the hazards of traditional PUs, while imparting inherent thermal stability and flame resistance uncharacteristic of conventional foams.
Collapse
|
8
|
Non-Isocyanate Aliphatic–Aromatic Poly(carbonate‑urethane)s—An Insight into Transurethanization Reactions and Structure–Property Relationships. Int J Mol Sci 2022; 23:ijms231910999. [PMID: 36232296 PMCID: PMC9570502 DOI: 10.3390/ijms231910999] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/24/2022] [Revised: 09/12/2022] [Accepted: 09/16/2022] [Indexed: 12/02/2022] Open
Abstract
This study reveals insights into the transurethanization reactions leading to the aliphatic–aromatic non-isocyanate poly(carbonate-urethane)s (NIPCUs) and their structure–property relationships. The crucial impact of the alkyl chain length in 4,4′-diphenylmethylene bis(hydroxyalkyl carbamate) (BHAC) on the process of transurethanization reactions was proved. The strong susceptibility of hydroxyethyl- and hydroxybutyl carbamate moieties to the back-biting side reactions was observed due to the formation of thermodynamically stable cyclic products and urea bonds in the BHACs and NIPCUs. When longer alkyl chains (hydroxypentyl-, hydroxyhexyl-, or hydroxydecyl carbamate) were introduced into the BHAC structure, it was not prone to the back-biting side reaction. Both 1H and 13C NMR, as well as FT-IR spectroscopies, confirmed the presence of carbonate and urethane (and urea for some of the samples) bonds in the NIPCUs, as well as proved the lack of allophanate and ether groups. The increase in the alkyl chain length (from 5 to 10 carbon atoms) between urethane groups in the NIPCU hard segments resulted in the increase in the elongation at break and crystalline phase content, as well as the decrease in the Tg, tensile strength, and hardness. Moreover, the obtained NIPCUs exhibited exceptional mechanical properties (e.g., tensile strength of 40 MPa and elongation at break of 130%).
Collapse
|
9
|
Coste G, Denis M, Sonnier R, Caillol S, Negrell C. Synthesis of reactive phosphorus-based carbonate for flame retardant polyhydroxyurethane foams. Polym Degrad Stab 2022. [DOI: 10.1016/j.polymdegradstab.2022.110031] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
10
|
A Green Resin Wood Adhesive from Synthetic Polyamide Crosslinking with Glyoxal. Polymers (Basel) 2022; 14:polym14142819. [PMID: 35890595 PMCID: PMC9318107 DOI: 10.3390/polym14142819] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/16/2022] [Revised: 07/02/2022] [Accepted: 07/05/2022] [Indexed: 02/04/2023] Open
Abstract
Glyoxal is considered to be the most likely substitute for formaldehyde to synthesize resin adhesives for wood bonding due to its reactivity, structural characteristics, being non-toxic, low volatility, and acceptable cost. Regrettably, the performance of the resin synthesized using glyoxal to directly replace all formaldehyde is not totally satisfactory, especially as it has almost no water resistance. This makes such a simple alternative fail to be suitable for industrial production. To prepare an environment-friendly glyoxal-based adhesive with good bonding performance, the work presented here relies first on reacting citric acid and hexamethylene diamine, producing a polyamide, with glyoxal, and then crosslinking it, thus synthesizing a thermosetting resin (namely CHG) adhesive and applying it for plywood bonding. The plywood prepared exhibits excellent dry and wet shear strength, which are better than GB/T9846-2015 standard requirements (≥0.7 MPa), and even after being soaked in hot water at 63 °C for 3 h, its strength is still as high as 1.35 MPa. The CHG resin is then potentially an adhesive for industrial application for replacing UF (urea-formaldehyde) and MUF (melamine-urea-formaldehyde) adhesives for wood composites.
Collapse
|
11
|
Ahmad ZR, Mahanwar PA. Synthesis and properties of foams from a blend of vegetable oil based polyhydroxyurethane and epoxy resin. CELLULAR POLYMERS 2022. [DOI: 10.1177/02624893221101170] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
This article aims to highlight the synthesis of foams from a blend of hydroxyurethane of castor oil and epoxy resin. An epoxidized castor oil of 4% oxirane oxygen was first converted to cyclic carbonate of castor oil at 120°C, 1 atm CO2 pressure and then it was reacted with three different aliphatic diamines to yield amine terminated Polyhydroxyurethane (PHU). Foams were prepared in a metal mould from the blend of PHU, epoxy resin, epoxy hardener and polymethylhydrogensiloxane blowing agent which releases hydrogen gas upon reaction with amine. FTIR and 1H NMR of cyclic carbonate of castor oil and PHU of castor oil were done to confirm their chemical structures. Optical microscopy and scanning electron microscopy of foams was done to assess their cellular morphology along with DSC and TGA to evaluate their thermal properties. Both flexible and rigid type of foams were synthesised in this study. Resilience of flexible foams was inspected using a ball rebound test and compression-recovery test while thermal insulation property was checked by measuring thermal conductivity, thermal diffusivity and R-values of rigid foams from heat transfer study using a heat transfer apparatus.
Collapse
Affiliation(s)
- Zeeshan R Ahmad
- Department of Polymer and Surface Engineering, Institute of Chemical Technology, Mumbai, India
| | - Prakash A Mahanwar
- Department of Polymer and Surface Engineering, Institute of Chemical Technology, Mumbai, India
| |
Collapse
|
12
|
Cao L, Pizzi A, Zhang Q, Tian H, Lei H, Xi X, Du G. Preparation and characterization of a novel environment-friendly urea-glyoxal resin of improved bonding performance. Eur Polym J 2022. [DOI: 10.1016/j.eurpolymj.2021.110915] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
13
|
Gomez-Lopez A, Elizalde F, Calvo I, Sardon H. Trends in non-isocyanate polyurethane (NIPU) development. Chem Commun (Camb) 2021; 57:12254-12265. [PMID: 34709246 DOI: 10.1039/d1cc05009e] [Citation(s) in RCA: 49] [Impact Index Per Article: 16.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
The transition towards safer and more sustainable production of polymers has led to a growing body of academic research into non-isocyanate polyurethanes (NIPUs) as potential replacements for conventional, isocyanate-based polyurethane materials. This perspective article focuses on the opportunities and current limitations of NIPUs produced by the reaction between biobased cyclic carbonates with amines, which offers an interesting pathway to renewable NIPUs. While it was initially thought that due to the similarities in the chemical structure, NIPUs could be used to directly replace conventional polyurethanes (PU), this has proven to be more challenging to achieve in practice. As a result, and in spite of the vast amount of academic research into this topic, the market size of NIPUs remains negligible. In this perspective, we will emphasize the main limitations of NIPUs in comparison to conventional PUs and the most significant advances made by others and us to overcome these limitations. Finally, we provide our personal view of where research should be directed to promote the transition from the academic to the industrial sector.
Collapse
Affiliation(s)
- Alvaro Gomez-Lopez
- POLYMAT and Department of Polymers and Advanced Materials: Physics, Chemistry and Technology, Faculty of Chemistry, University of the Basque Country UPV/EHU, Paseo Manuel de Lardizabal 3, 20018, Donostia-San Sebastián, Spain.
| | - Fermin Elizalde
- POLYMAT and Department of Polymers and Advanced Materials: Physics, Chemistry and Technology, Faculty of Chemistry, University of the Basque Country UPV/EHU, Paseo Manuel de Lardizabal 3, 20018, Donostia-San Sebastián, Spain.
| | - Iñigo Calvo
- ORIBAY Group Automotive S.L. R&D Department, Portuetxe bidea 18, 20018, Donostia-San Sebastián, Spain
| | - Haritz Sardon
- POLYMAT and Department of Polymers and Advanced Materials: Physics, Chemistry and Technology, Faculty of Chemistry, University of the Basque Country UPV/EHU, Paseo Manuel de Lardizabal 3, 20018, Donostia-San Sebastián, Spain.
| |
Collapse
|
14
|
Non-Furanic Humins-Based Non-Isocyanate Polyurethane (NIPU) Thermoset Wood Adhesives. Polymers (Basel) 2021; 13:polym13030372. [PMID: 33504084 PMCID: PMC7865859 DOI: 10.3390/polym13030372] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2021] [Revised: 01/15/2021] [Accepted: 01/17/2021] [Indexed: 11/17/2022] Open
Abstract
Predominantly non-furanic commercial humins were used to prepare humin-based non-isocyanate polyurethane (NIPU) resins for wood panel adhesives. Pure humin-based NIPU resins and tannin–humin NIPU resins were prepared, the latter to upgrade the humins’ performance. Species in the raw humins and species formed in the NIPU resins were identified by Matrix Assisted Laser Desorption Ionization Time of Flight (MALDI ToF) spectrometry and Fourier Transform Infrared (FTIR). Humins, fulvic acid and derivatives, humic acid and its fragments, some lignans present and furanic oligomers present formed NIPU linkages. Thermomechanical analysis (TMA) showed that as with other biomaterials-based NIPU resins, all these resins also showed two temperature peaks of curing, the first around 130 °C and the second around 220 °C. A decrease in the Modulus of Elasticity (MOE) between the two indicated that the first curing period corresponded to linear growth of the oligomers forming a physical entanglement network. This then disentangled, and the second corresponded to the formation of a chemical cross-linked network. This second peak was more evident for the tannin–humin NIPU resins. All the laboratory particleboard made and tested either bonded with pure humins or with tannin–humin NIPU adhesives satisfied well the internal bond strength requirements of the relevant standard for interior grade panels. The tannin–humin adhesives performed clearly better than the pure humins one.
Collapse
|
15
|
Mort R, Vorst K, Curtzwiler G, Jiang S. Biobased foams for thermal insulation: material selection, processing, modelling, and performance. RSC Adv 2021; 11:4375-4394. [PMID: 35424381 PMCID: PMC8694562 DOI: 10.1039/d0ra09287h] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2020] [Accepted: 12/09/2020] [Indexed: 01/17/2023] Open
Abstract
With the urgent need for the development of sustainable materials and a circular economy, a surge of research regarding biobased materials and associated processing methods has resulted in many experimental biobased foams. Although several biobased foams are already shown to have thermal and mechanical properties competitive with expanded polystyrene, there remains a fundamental knowledge gap leading to limited understanding of the principles that determine performance. This review outlines the progress in this burgeoning field, introducing materials selection and processing, comparing performance, examining efforts in modelling physical properties, and discusses challenges in applying models to real biobased systems. The focus is on low thermal conductivity, which is a critical property for temperature-controlled applications such as packaging for refrigerated/frozen foods, medications, and vaccines as well as building materials. Currently, the trend in the field is moving towards fully biobased and compostable foams, though partially biobased polyurethane foams remain the most consistent performers. To illustrate the foam structure–property relationship, thermal conductivity, cell size, and density data were compiled. Given the complexity of biobased foams, heat transfer models aid in identifying crucial variables. However, data relevant to the insulation capability of biobased foams is not fully reported in many references. To address this issue, we employed a dimensional analysis to fill the gaps, revealing a power law correlation between thermal conductivity and relative density. Our approach is not intended as a robust prediction technique, but rather a simple demonstration of how biobased foams data could be utilized to predict the most promising materials and methods. This review outlines the progress in biobased foams with a focus on low thermal conductivity. It introduces materials selection and processing, compares performance, examines modelling of physical properties, and discusses challenges in applying models to real systems.![]()
Collapse
Affiliation(s)
- Rebecca Mort
- Materials Science and Engineering, Iowa State University Ames Iowa 50011 USA .,Polymer and Food Protection Consortium, Iowa State University Ames Iowa 50011 USA
| | - Keith Vorst
- Food Science and Human Nutrition, Iowa State University Ames Iowa 50011 USA.,Polymer and Food Protection Consortium, Iowa State University Ames Iowa 50011 USA
| | - Greg Curtzwiler
- Food Science and Human Nutrition, Iowa State University Ames Iowa 50011 USA.,Polymer and Food Protection Consortium, Iowa State University Ames Iowa 50011 USA
| | - Shan Jiang
- Materials Science and Engineering, Iowa State University Ames Iowa 50011 USA .,Polymer and Food Protection Consortium, Iowa State University Ames Iowa 50011 USA
| |
Collapse
|
16
|
Chen X, Guigo N, Pizzi A, Sbirrazzuoli N, Li B, Fredon E, Gerardin C. Ambient Temperature Self-Blowing Tannin-Humins Biofoams. Polymers (Basel) 2020; 12:polym12112732. [PMID: 33213107 PMCID: PMC7698803 DOI: 10.3390/polym12112732] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/05/2020] [Revised: 11/15/2020] [Accepted: 11/17/2020] [Indexed: 11/16/2022] Open
Abstract
Ambient temperature self-blowing tannin-furanic foams have been prepared by substituting a great part-even a majority-of furfuryl alcohol with humins, a polyfuranic material derived from the acid treatment at high temperature of fructose. Closed-cell foams were prepared at room temperature and curing, while interconnected-cell foams were prepared at 80 °C and curing, this being due to the more vigorous evaporation of the solvent. These foams appear to present similar characteristics as other tannin-furanic foams based only on furfuryl alcohol. A series of tannin-humins-furfuryl alcohol oligomer structures have been defined indicating that all three reagents co-react. Humins appeared to react well with condensed tannins, even higher molecular weight humins species, and even at ambient temperature, but they react slower than furfuryl alcohol. This is due to their high average molecular weight and high viscosity, causing their reaction with other species to be diffusion controlled. Thus, small increases in solvent led to foams with less cracks and open structures. It showed that furfuryl alcohol appears to also have a role as a humins solvent, and not just as a co-reagent and self-polymerization heat generator for foam expansion and hardening. Stress-strain for the different foams showed a higher compressive strength for both the foam with the lowest and the highest proportion of humins, thus in the dominant proportions of either furfuryl alcohol or the humins. Thus, due to their slower reactivity as their proportion increases to a certain critical level, more of them do proportionally participate within the expansion/curing time of the foam to the reaction.
Collapse
Affiliation(s)
- Xinyi Chen
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (E.F.)
| | - Nathanael Guigo
- Department of Chemistry, University of the Cote d’Azur, 06103 Nice, France; (N.G.); (N.S.); (B.L.)
| | - Antonio Pizzi
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (E.F.)
- Correspondence:
| | - Nicolas Sbirrazzuoli
- Department of Chemistry, University of the Cote d’Azur, 06103 Nice, France; (N.G.); (N.S.); (B.L.)
| | - Bin Li
- Department of Chemistry, University of the Cote d’Azur, 06103 Nice, France; (N.G.); (N.S.); (B.L.)
| | - Emmanuel Fredon
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (E.F.)
| | - Christine Gerardin
- LERMAB, University of Lorraine, Boulevard des Aiguillettes, 54000 Nancy, France;
| |
Collapse
|
17
|
The Toxicological Testing and Thermal Decomposition of Drive and Transport Belts Made of Thermoplastic Multilayer Polymer Materials. Polymers (Basel) 2020; 12:polym12102232. [PMID: 32998361 PMCID: PMC7600647 DOI: 10.3390/polym12102232] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/18/2020] [Revised: 09/27/2020] [Accepted: 09/28/2020] [Indexed: 11/17/2022] Open
Abstract
The article presents the potential impact of flat drive and transport belts on people's safety during a fire. The analysis distinguished belts made of classically used fabric-rubber composite materials reinforced with cord and currently used multilayer polymer composites. Moreover, the products' multilayers during the thermal decomposition and combustion can be a source of emissions for unpredictable and toxic substances with different concentrations and compositions. In the evaluation of the compared belts, a testing methodology was used to determine the toxicometric indicators (WLC50SM) on the basis of which it was possible to determine the toxicity of thermal decomposition and combustion products in agreement with the standards in force in several countries of the EU and Russia. The analysis was carried out on the basis of the registration of emissions of chemical compounds during the thermal decomposition and combustion of polymer materials at three different temperatures. Moreover, the degradation kinetics of the polymeric belts by using the thermogravimetric (TGA) technique was evaluated. Test results have shown that products of thermal decomposition resulting from the neoprene (NE22), leder leder (LL2), thermoplastic connection (TC), and extra high top cower (XH) belts can be characterized as moderately toxic or toxic. Their toxicity significantly increases with the increasing temperature of thermal decomposition or combustion, especially above 450 °C. The results showed that the belts made of several layers of polyamide can be considered the least toxic in fire conditions. The TGA results showed that NBR/PA/PA/NBR belt made with two layers of polyamide and the acrylonitrile-butadiene rubber has the highest thermal stability in comparison to other belts.
Collapse
|
18
|
Monie F, Grignard B, Thomassin J, Mereau R, Tassaing T, Jerome C, Detrembleur C. Chemo‐ and Regioselective Additions of Nucleophiles to Cyclic Carbonates for the Preparation of Self‐Blowing Non‐Isocyanate Polyurethane Foams. Angew Chem Int Ed Engl 2020. [DOI: 10.1002/ange.202006267] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Affiliation(s)
- Florent Monie
- Center for Education and Research on Macromolecules (CERM) CESAM Research Unit University of Liège Department of Chemistry Sart-Tilman, B6A 4000 Liège Belgium
| | - Bruno Grignard
- Center for Education and Research on Macromolecules (CERM) CESAM Research Unit University of Liège Department of Chemistry Sart-Tilman, B6A 4000 Liège Belgium
| | - Jean‐Michel Thomassin
- Center for Education and Research on Macromolecules (CERM) CESAM Research Unit University of Liège Department of Chemistry Sart-Tilman, B6A 4000 Liège Belgium
| | - Raphael Mereau
- Institut des Sciences Moléculaires (ISM) UMR5255 CNRS Université de Bordeaux 351 Cours de la libération 33405 Talence Cedex France
| | - Thierry Tassaing
- Institut des Sciences Moléculaires (ISM) UMR5255 CNRS Université de Bordeaux 351 Cours de la libération 33405 Talence Cedex France
| | - Christine Jerome
- Center for Education and Research on Macromolecules (CERM) CESAM Research Unit University of Liège Department of Chemistry Sart-Tilman, B6A 4000 Liège Belgium
| | - Christophe Detrembleur
- Center for Education and Research on Macromolecules (CERM) CESAM Research Unit University of Liège Department of Chemistry Sart-Tilman, B6A 4000 Liège Belgium
| |
Collapse
|
19
|
Monie F, Grignard B, Thomassin JM, Mereau R, Tassaing T, Jerome C, Detrembleur C. Chemo- and Regioselective Additions of Nucleophiles to Cyclic Carbonates for the Preparation of Self-Blowing Non-Isocyanate Polyurethane Foams. Angew Chem Int Ed Engl 2020; 59:17033-17041. [PMID: 32521118 DOI: 10.1002/anie.202006267] [Citation(s) in RCA: 25] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2020] [Indexed: 11/07/2022]
Abstract
Polyurethane (PU) foams are indisputably daily essential materials found in many applications, notably for comfort (for example, matrasses) or energy saving (for example, thermal insulation). Today, greener routes for their production are intensively searched for to avoid the use of toxic isocyanates. An easily scalable process for the simple construction of self-blown isocyanate-free PU foams by exploiting the organocatalyzed chemo- and regioselective additions of amines and thiols to easily accessible cyclic carbonates is described. These reactions are first validated on model compounds and rationalized by DFT calculations. Various foams are then prepared and characterized in terms of morphology and mechanical properties, and the scope of the process is illustrated by modulating the composition of the reactive formulation. With impressive diversity and accessibility of the main components of the formulations, this new robust and solvent-free process could open avenues for construction of more sustainable PU foams, and offers the first realistic alternative to the traditional isocyanate route.
Collapse
Affiliation(s)
- Florent Monie
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, University of Liège, Department of Chemistry, Sart-Tilman, B6A, 4000, Liège, Belgium
| | - Bruno Grignard
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, University of Liège, Department of Chemistry, Sart-Tilman, B6A, 4000, Liège, Belgium
| | - Jean-Michel Thomassin
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, University of Liège, Department of Chemistry, Sart-Tilman, B6A, 4000, Liège, Belgium
| | - Raphael Mereau
- Institut des Sciences Moléculaires (ISM), UMR5255 CNRS, Université de Bordeaux, 351 Cours de la libération, 33405, Talence Cedex, France
| | - Thierry Tassaing
- Institut des Sciences Moléculaires (ISM), UMR5255 CNRS, Université de Bordeaux, 351 Cours de la libération, 33405, Talence Cedex, France
| | - Christine Jerome
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, University of Liège, Department of Chemistry, Sart-Tilman, B6A, 4000, Liège, Belgium
| | - Christophe Detrembleur
- Center for Education and Research on Macromolecules (CERM), CESAM Research Unit, University of Liège, Department of Chemistry, Sart-Tilman, B6A, 4000, Liège, Belgium
| |
Collapse
|
20
|
Chen X, Li J, Xi X, Pizzi A, Zhou X, Fredon E, Du G, Gerardin C. Condensed tannin-glucose-based NIPU bio-foams of improved fire retardancy. Polym Degrad Stab 2020. [DOI: 10.1016/j.polymdegradstab.2020.109121] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
21
|
Chen X, Xi X, Pizzi A, Fredon E, Zhou X, Li J, Gerardin C, Du G. Preparation and Characterization of Condensed Tannin Non-Isocyanate Polyurethane (NIPU) Rigid Foams by Ambient Temperature Blowing. Polymers (Basel) 2020; 12:E750. [PMID: 32235495 PMCID: PMC7240429 DOI: 10.3390/polym12040750] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/06/2020] [Revised: 03/20/2020] [Accepted: 03/27/2020] [Indexed: 11/16/2022] Open
Abstract
Ambient temperature self-blowing mimosa tannin-based non-isocyanate polyurethane (NIPU) rigid foam was produced, based on a formulation of tannin-based non-isocyanate polyurethane (NIPU) resin. A citric acid and glutaraldehyde mixture served as a blowing agent used to provide foaming energy and cross-link the tannin-derived products to synthesize the NIPU foams. Series of tannin-based NIPU foams containing a different amount of citric acid and glutaraldehyde were prepared. The reaction mechanism of tannin-based NIPU foams were investigated by Fourier Trasform InfraRed (FT-IR), Matrix Assisted Laser Desorption Ionization (MALDI-TOF) mass spectrometry, and 13C Nuclear Magnetic Resonance (13C NMR). The results indicated that urethane linkages were formed. The Tannin-based NIPU foams morphology including physical and mechanical properties were characterized by mechanical compression, by scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). All the foams prepared showed a similar open-cell morphology. Nevertheless, the number of cell-wall pores decreased with increasing additions of glutaraldehyde, while bigger foam cells were obtained with increasing additions of citric acid. The compressive mechanical properties improved with the higher level of crosslinking at the higher amount of glutaraldehyde. Moreover, the TGA results showed that the tannin-based NIPU foams prepared had similar thermal stability, although one of them (T-Fs-7) presented the highest char production and residual matter, approaching 18.7% at 790 °C.
Collapse
Affiliation(s)
- Xinyi Chen
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (X.X.); (E.F.)
| | - Xuedong Xi
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (X.X.); (E.F.)
| | - Antonio Pizzi
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (X.X.); (E.F.)
| | - Emmanuel Fredon
- LERMAB, University of Lorraine, 27 rue Philippe Seguin, 88000 Epinal, France; (X.C.); (X.X.); (E.F.)
| | - Xiaojian Zhou
- Yunnan Key Laboratory of Wood Adhesives and Glue Products, Southwest Forestry University, Kunming 650224, China; (X.Z.); (J.L.); (G.D.)
| | - Jinxing Li
- Yunnan Key Laboratory of Wood Adhesives and Glue Products, Southwest Forestry University, Kunming 650224, China; (X.Z.); (J.L.); (G.D.)
| | - Christine Gerardin
- LERMAB, University of Lorraine, Boulevard des Aiguillettes, 54000 Nancy, France;
| | - Guanben Du
- Yunnan Key Laboratory of Wood Adhesives and Glue Products, Southwest Forestry University, Kunming 650224, China; (X.Z.); (J.L.); (G.D.)
| |
Collapse
|