Nano-Brushes of Alcohols Grafted onto Cellulose Nanocrystals for Reinforcing Poly(Butylene Succinate): Impact of Alcohol Chain Length on Interfacial Adhesion

Modification and characterization of a novel and fluorine-free cellulose nanofiber with hydrophobic and oleophobic properties

In this study, a brand-new, easy, and environmentally friendly approach for chemically functionalizing 2,2,6,6-tetramethylpiperidinyloxyl radical (TEMPO)-oxidized cellulose nanofiber (TOCNF) to produce modified cellulose nanofiber (octadecylamine-citric acid-CNF) was proposed. Effects of octadecylamine (ODA)/TOCNF mass ratio on the chemical structure, morphology, surface hydrophobicity and oleophobicity were studied. According to Fourier transform infrared spectroscopy (FTIR) analysis, ODA was successfully grafted onto the TOCNF by simple citric acid (CA) esterification and amidation reactions. Scanning electron microscopy (SEM) showed that a new rough structure was formed on the ODA-CA-CNF surface. The water contact angle (WCA) and the castor oil contact angle (OCA) of the ODA-CA-CNF reached 139.6° and 130.6°, respectively. The high-grafting-amount ODA-CA-CNF was sprayed onto paper, and the OCA reached 118.4°, which indicated good oil-resistance performance. The low-grafting-amount ODA-CNF was applied in a pH-responsive indicator film, exhibiting a colour change in response to the pH level, which can be applied in smart food packaging. The ODA-CA-CNF with excellent water/oil-resistance properties and fluorine-free properties can replace petrochemical materials and can be used in the fields of fluorine-free oil-proof paper.

Multiple noncovalent interactions tailored crystallization and performance reinforcement mechanisms of Biopolyester Composites with functional Cellulose Nanocrystals

The slow crystallization and weak mechanical features of poly (butylene adipate-co-terephthalate) (PBAT) have become a severe industrial problem in food packaging. Inspired by principle of bionic structure, functional cellulose nanocrystals (CNC) modified with hexamethylene diisocyanate (HMDI) and toluene diisocyanate (TDI) can enhance the crystallization ability and mechanical properties of PBAT nanocomposites. Significantly, CNC-T (CNC modified by TDI) showed a stronger reinforced effect on PBAT properties than unmodified CNCs and CNC-H (CNC modified by HMDI) nanofillers due to hydrogen bonds, π-π interaction between PBAT matrix and CNC-T nanofillers with benzene ring structure. Thus, compared with pure PBAT, PBAT/5CNC-T composites displayed an enhancement of 34.5 % on the tensile strength and exhibited the most robust nucleation ability on PBAT crystallization than CNC and CNC-H. Meanwhile, the possible nucleation, crystallization, and performance reinforcement mechanisms of PBAT nanocomposites have been presented, which is very beneficial for designing robust PBAT nanocomposites with functional cellulose nanocrystals for potential green packaging.

Graft onto approaches for nanocellulose-based advanced functional materials

The resurgence of cellulose as nano-dimensional 'nanocellulose' has unlocked a sustainable bioeconomy for the development of advanced functional biomaterials. Bestowed with multifunctional attributes, such as renewability and abundance of its source, biodegradability, biocompatibility, superior mechanical, optical, and rheological properties, tunable self-assembly and surface chemistry, nanocellulose presents exclusive opportunities for a wide range of novel applications. However, to alleviate its intrinsic hydrophilicity-related constraints surface functionalization is inevitably needed to foster various targeted applications. The abundant surface hydroxyl groups on nanocellulose offer opportunities for grafting small molecules or macromolecular entities using either a 'graft onto' or 'graft from' approach, resulting in materials with distinctive functionalities. Most of the reviews published to date extensively discussed 'graft from' modification approaches, however 'graft onto' approaches are not well discussed. Hence, this review aims to provide a comprehensive summary of 'graft onto' approaches. Furthermore, insight into some of the recently emerging applications of this grafted nanocellulose including advanced nanocomposite formulation, stimuli-responsive materials, bioimaging, sensing, biomedicine, packaging, and wastewater treatment has also been reviewed.

Novel Electrically Conductive Cellulose Nanocrystals with a Core-Shell Nanostructure Towards Biodegradable Electronics

Electronic waste (e-waste) is the fastest growing waste stream and its negative impact on the environment and human health is major because of the toxicity and non-biodegradability of its constituents. For their biodegradability and nontoxicity, bio-based materials have been proposed as potential material candidates in the field of electronics. Among these, cellulose nanocrystals (CNCs) have many interesting properties including biodegradability, high mechanical strength, and possibility to functionalize. In terms of electrical properties, CNCs are electrically insulated, limiting their potential in electronics. This work aims to build up a poly(o-toluidine)-like shell around the CNCs to render them conductive. For this goal, the surface of the CNCs was carbamated using 2,4-toluene diisocyanate through the para-isocyanates and the ortho-isocyanates were later hydrolyzed to amine groups using HCl-acidified dimethylsulfoxide. The resultant o-toluidine-like molecules on the CNC surface were then polymerized using ammonium persulfate to form an electrically conductive shell around each CNC. The resultant CNCs were then characterized for their chemical, morphological, and electrical properties. Fourier-transform infrared analysis of the CNCs at each stage confirmed the expected chemical changes upon carbamation, hydrolysis, and polymerization and X-ray diffraction confirmed the permanence of the native crystalline structure of the CNCs. The atomic force microscopy images showed that the obtained CNCs were on average slightly thicker than the original ones, possibly due to the growth of the poly(o-toluidine) shell around them. Finally, using the four-point method, the obtained CNCs were electrically conductive with a conductivity of 0.46 S/cm. Such novel electrically conductive CNCs should have great potential in a wide range of applications including electronics, sensing, and medicine.

Recent Advances on Cellulose Nanocrystals and Their Derivatives

Nanocellulose, typically cellulose nanocrystals (CNCs), has excellent properties and is widely used. In particular, CNC has a small dimension, high chemical reactivity, and high sustainability, which makes it an excellent candidate as a starting material to be converted into nanocellulose derivatives. Chemical modification is essential for obtaining the desired products; the modifications create different functional attachment levels and generate novel microstructures. Recent advances on nanocellulose derivatives have not yet been reviewed and evaluated for the last five years. Nanocellulose derivative materials are being used in a wide variety of high-quality functional applications. To meet these requirements, it is essential for researchers to fully understand CNCs and derivative materials, precisely their characteristics, synthesis methods, and chemical modification approaches. This paper discusses CNC and its derivatives concerning the structural characteristics, performance, and synthesis methods, comparing the pros and cons of these chemical modification approaches reported in recent years. This review also discusses the critical physicochemical properties of CNC derivative products, including solubility, wetting performance, and associated impacts on properties. Lastly, this paper also comments on the bottlenecks of nanocellulose derivatives in various applications and briefly discusses their future research direction.

Grafting Diels-Alder moieties on cellulose nanocrystals through carbamation

The Diels-Alder reaction is a promising click chemistry for the design of advanced materials from cellulose nanocrystals (CNCs). Transferring such chemistry to cellulose nanocrystals requires the precise grafting of reactive Diels-Alder moeities under heterogeneous conditions without compromising the nanocrystals morphology. In this study toluene diisocyanate is used as a spacer to graft Diels-Alder moieties viz the furyl and protected maleimido moieties onto cellulose nanocrystals. A factorial experimental design reveals that reaction time and reactant molar ratio positively affect the grafting efficiency, as evidenced by FTIR and CHNS elemental analysis. The surface degree of substitution was analyzed via CHNS elemental analysis and XPS and found to range between 0.05 to 0.30, with a good agreement between the two techniques. ¹³C CP/MAS NMR confirmed that the grafted moieties and CNCs are intact after reaction. Side reactions were also observed and their impact on performing controllable click chemistry between cellulose nanocrystals is discussed.

Impact of the Surface Properties of Cellulose Nanocrystals on the Crystallization Kinetics of Poly(Butylene Succinate)

The hydrophilicity of cellulose nanocrystals (CNCs) is a major challenge for their processing with hydrophobic polymers and matrices. As a result, many surface modifications have been proposed to hydrophobize CNCs. The authors showed in an earlier study that grafting alcohols of different chain lengths onto the surface of CNCs using toluene diisocyanate (TDI) as a linker can systematically hydrophobize CNCs to a water contact angle of up to 120° depending on the alcohol chain length. Then, the hydrophobized CNCs were used to mechanically reinforce poly(butylene succinate) (PBS), which is a hydrophobic polymer. As a result of hydrophobization, PBS/CNCs interfacial adhesion and the composite mechanical properties significantly improved with the increasing CNC contact angle. Continuing on these results, this paper investigates the impact of CNC surface properties on the crystallization behavior of PBS using differential scanning calorimetry (DSC). The results showed that the crystallization temperature of PBS increased from 74.7 °C to up to 86.6 °C as a result of CNC nucleation activity, and its value was proportionally dependent on the contact angle of the CNCs. In agreement, the nucleation activity factor (φ) estimated using Dobreva and Gutzow’s method decreased with the increasing CNC contact angle. Despite the nucleation action of CNCs, the rate constant of PBS crystallization as estimated using the Avrami model decreased in general as a result of a prevailing impeding effect. This decrease was minimized with increasing the contact angle of the CNCs. The impeding effect also increased the average activation energy of crystallization, which was estimated using the Kissinger method. Moreover, the Avrami exponent (n) decreased because of CNC addition, implying a heterogeneous crystallization, which was also apparent in the crystallization thermograms. Overall, the CNC addition facilitated PBS nucleation but retarded its crystallization, and both processes were significantly affected by the surface properties of the CNCs.