The Effect of Glycidyl Azide Polymer Grafted Tetrafunctional Isocyanate on Polytriazole Polyethylene Oxide-Tetrahydrofuran Elastomer and its Propellant Properties

Nitrogen-rich energetic polymer powered aluminum particles with enhanced reactivity and energy content

Aluminum particles are of significant interest in enhancing the energy release performance of explosives. One of the major impediments to their use is that Al2O3 shell significantly decreases overall performance. To address this issue, we investigate creating aluminum particles with a glycidyl azide polymer (GAP) coating to improve their reactivity while retaining their energy content. We found that the aluminum particles were coated with a GAP layer of thickness around 8.5 nm. The coated aluminum particles were compared to non-coated powder by the corresponding reactivity parameters obtained from simultaneous differential scanning calorimetry, thermal gravimetric analysis, coupled with mass spectral and infrared spectral analyses. Besides, the comparison on the energy content was also conducted based on P-t tests and a laser-induced air shock from energetic materials (LASEM) technique. It was found that GAP shifted the oxidation onset of aluminum particles to a lower temperature by ~ 10 °C. Besides, the oxidation activation energy of aluminum particles was also reduced by ~ 15 kJ mol-1. In return, aluminum particles reduced the activation energy of the second stage decomposition of the GAP by 276 kJ mol-1. And due to the synergistic effect between aluminum and GAP, the decomposition products of GAP were prone to be oxycarbide species rather than carbonitride species. In addition, the P-t test showed the peak pressure and pressurization rate of GAP coated aluminum particles were separately 1.4 times and 1.9 times as large as those of non-coated aluminum particles. Furthermore, the LASEM experiment suggested the shock wave velocity of the GAP coated aluminum particles was larger than that of non-coated aluminum particles, and the largest velocity difference for them could be 0.6 km s-1. This study suggests after coating by GAP, the aluminum particles possess enhanced reaction performance, which shows potential application value in the fields of aluminized explosives and other energetic fields.

Adsorption of Polymer-Grafted Nanoparticles on Curved Surfaces

Nanometer-curved surfaces are abundant in biological systems as well as in nano-sized technologies. Properly functionalized polymer-grafted nanoparticles (PGNs) adhere to surfaces with different geometries and curvatures. This work explores some of the energetic and mechanical characteristics of the adhesion of PGNs to surfaces with positive, negative and zero curvatures using Coarse-Grained Molecular Dynamics (CGMD) simulations. Our calculated free energies of binding of the PGN to the curved and flat surfaces as a function of separation distance show that curvature of the surface critically impacts the adhesion strength. We find that the flat surface is the most adhesive, and the concave surface is the least adhesive surface. This somewhat counterintuitive finding suggests that while a bare nanoparticle is more likely to adhere to a positively curved surface than a flat surface, grafting polymer chains to the nanoparticle surface inverts this behavior. Moreover, we studied the rheological behavior of PGN upon separation from the flat and curved surfaces under external pulling force. The results presented herein can be exploited in drug delivery and self-assembly applications.

Glycidyl azide polymer-based polyurethane vitrimers with disulfide chain extenders

Glycidyl azide polymer-based polyurethane vitrimers were synthesized. By optimizing the parameters, the vitrimers showed decent mechanical properties, healability and reprocessability. Fillers were loaded to synthesize healable composites.

Curing Behaviors of Alkynyl-Terminated Copolyether with Glycidyl Azide Polymer in Energetic Plasticizers

Alkynyl-terminated polyethylene oxide−tetrahydrofuran (ATPET) and glycidyl azide polymer (GAP) could be linked through click-chemistry between the alkynyl and azide, and the product may serve a binder for solid propellants. The effects of the energetic plasticizers A3 [1:1 mixture of bis-(2,2-dinitropropy) acetal (BDNPA) and bis-(2,2-dinitropropyl) formal(BDNPN)] and Bu-NENA [N-butyl-N-(2nitroxyethyl) nitramine] on the curing reaction between ATPET and GAP have been studied. A diffusion-ordered nuclear magnetic resonance spectroscopy (DOSY-NMR) approach has been used to monitor the change in the diffusion coefficient of cross-linked polytriazole polyethylene oxide−tetrahydrofuran (PTPET). The change in the diffusion coefficient of PTPET with A3 plasticizer is significantly higher than that of PTPET with Bu-NENA. Viscosity analysis further highlighted the difference between A3 and Bu-NENA in the curing process—the curing curve of PTPET (A3) with time can be divided into two stages, with an inflection point being observed on the fourth day. For PTPET (Bu-NENA), in contrast, only one stage is seen. The above methods, together with gel permeation chromatography (GPC) analysis, revealed distinct effects of A3 and Bu-NENA on the curing process of PTPET. X-ray Photoelectron Spectroscopy (XPS) analysis showed that Bu-NENA has little effect on the valence oxidation of copper in the catalyst. Thermogravimetric (TG) analysis indicated that Bu-NENA helps to improve the thermal stability of the catalyst. After analysis of several possible factors by means of XPS, modeling with Material Studio and TG, the formation of molecular cages between Bu-NENA and copper is considered to be the reason for the above differences. In this article, GAP (Mn = 4000 g/mol) was used to replace GAP (Mn = 427 g/mol) to successfully synthesize the PTPET elastomer with Bu-NENA plasticizer. Mechanical data measured for the PTPET (Bu-NENA) sample included ε = 34.26 ± 2.98%, and σ = 0.198 ± 0.015 MPa.