Study of POSS on the Properties of Novel Inorganic Dental Composite Resin

POSS and PEG Contained Copolymer for Antibioadhesive Rigid Contact Lenses Materials Application

Myopia is a global public health issue. Rigid contact lenses (RCLs) are an effective way to correct or control myopia. However, bioadhesion issues remain one of the significant obstacles limiting its clinical application. Although enhancing hydrophilicity through various surface treatments can mitigate this problem, the duration of effectiveness is short-lived and the processing involved is complex and costly. Herein, an antiadhesive RCLs material was designed via 8-armed methacrylate-POSS (8MA-POSS), and poly(ethylene glycol) methacrylate (PEGMA) copolymerization with 3-[tris(trimethylsiloxy)silyl] propyl methacrylate (TRIS). The POSS and PEG segments incorporated P(TRIS-co-PEGMA-co-8MA-POSS) (PTPM) material was obtained and their optical transparency, refractive index, resolution, hardness, surface charge, thermal features, and wettability were tested and optimized. The antibioadhesion activities, including protein, lipid, and bacteria, were evaluated as well. In vitro and in vivo results indicated that the optimized antibioadhesive PTPM materials present good biocompatibility and biosafety. Thus, such POSS and PEG segments containing material were a potential antibioadhesive RCL material option.

POSS hybrid bioactive glass dental composite resin materials: Synthesis and analysis

INTRODUCTION

This study create a dental composite by hybirding polyhedral oligo-sesquioxide nano monomers and bioactive glass BG 45S5.

METHODS

Make an experimental composite resin material with a 60 % filler content overall by substituting 20 % of the filler with BG 45S5. The experimental resins are grouped and named P0, P2, P4, P6 and P8 based on the reactive nanomonomer methacrylic acid-based multifaceted oligomeric sesquisiloxane (POSS) added by 2 %-8 % in the resin matrix portion of each group. Utilize a universal testing machine to analyze and compare the mechanical properties of these, then perform Fourier infrared spectrum analysis, double bond conversion analysis, and scanning electron microscope analysis. Based on this, after soaking the experimental materials artificial saliva solution or lactic acid solution for a while, the pH changes of the solution, the release of Ca2+ and PO43- ions, and the precipitation of apatite on the resin material's surface were tested and analyzed. Cell viability tests were used to assess sample cell viability and quantify the cytotoxicity of biological cells. The independent sample t-test was used to examine the group comparisons, and a difference was considered statistically significant at P<0.05.

RESULTS

Outstanding mechanical and the double bond conversion are demonstrated by the nanocomposites when the POSS concentration hits 4 wt%. Agglomeration will cause the performance to deteriorate if the concentration beyond this threshold. In the P4 group, the double bond conversion, CS, and FS rose by a large margin, respectively, in comparison to the blank control group P0. Thankfully, the data demonstrate that adding POSS increases adhesive ability when compared to the blank group P0, however, there is no discernible difference between the other experimental groups. The acid neutralization capacity of the P4 group is essentially the same as that of the control group (P0). Ca2+ and PO43- ions are released in significant amounts following treatment with lactic acid solution, although this tendency is clearly less pronounced in artificial saliva. SEM and EDX data indicate that when the experimental resin is soaked in lactic acid solution and artificial saliva, apatite precipitation will happen on its surface. The results of the cell viability test indicated that there was no statistically significant difference between the experimental groups, and the viability of the cells increased after 24hours and 48 hours.

CONCLUSIONS

POSS was included into the composite resin along with 20% bioactive glass as a filler. When the proportion of POSS is less than 4%, the indices of composite resin materials rise in a dose-dependent way. When this value is surpassed, performance begins to deteriorate. The inclusion of POSS has no influence on the biological activity of the composites, which means that the hybrid composite resin is capable of acid neutralization, ion release, and apatite precipitation.

CLINICAL SIGNIFICANCE

The experimental composite resin can be used as an intelligent material in clinical treatment. It has the clinical application potential of preventing demineralization of tooth hard tissue, promoting remineralization, and improving edge sealing through apatite precipitation.

A Comparative Study on the Microscale and Macroscale Mechanical Properties of Dental Resin Composites

Dental resin composites are universal restorative materials, and various kinds of fillers are used to reinforce their mechanical properties. However, a combined study on the microscale and macroscale mechanical properties of dental resin composites is missing, and the reinforcing mechanism of the composites is still not fully clarified. In this work, the effects of the nano-silica particle on the mechanical properties of dental resin composites were studied by combined dynamic nanoindentation tests and macroscale tensile tests. The reinforcing mechanism of the composites was explored by combining near-infrared spectroscopy, scanning electron microscope, and atomic force microscope characterizations. It was found that the tensile modulus increased from 2.47 GPa to 3.17 GPa, and the ultimate tensile strength increased from 36.22 MPa to 51.75 MPa, with the particle contents increasing from 0% to 10%. From the nanoindentation tests, the storage modulus and hardness of the composites increased by 36.27% and 40.90%, respectively. The storage modulus and hardness were also found to increase by 44.11% and 46.46% when the testing frequency increased from 1 Hz to 210 Hz. Moreover, based on a modulus mapping technique, we found a boundary layer in which the modulus gradually decreased from the edge of the nanoparticle to the resin matrix. Finite element modeling was adopted to illustrate the role of this gradient boundary layer in alleviating the shear stress concentration on the filler-matrix interface. The present study validates mechanical reinforcement and provides a potential new insight for understanding the reinforcing mechanism of dental resin composites.

Molecular Simulations of Low-Shrinkage Dental Resins Containing Methacryl-Based Polyhedral Oligomeric Silsesquioxane (POSS)

Nanocomposites of methacrylate-based polyhedral oligomeric silsesquioxane (POSS) are used as resins in dentistry to fill dental cavities. In this article, molecular dynamics simulations (MDS) are used to study and understand the interactions of monofunctional and multifunctional methacrylate groups on hybrid resins containing POSS additives for dental applications. These interactions are further related to the structural properties of the nanocomposites, which in turn affect their macro-properties that are important, especially when used for specific uses such as dental resins. For monofunctional methacrylate, nanocomposite of methacryl isobutyl POSS (MIPOSS) and for multifunctional methacrylate, methacryl POSS (MAPOSS) are used in this study. Molecular dynamic simulations (MDS) are performed on both MIPOSS and MAPOSS systems by varying the amount of POSS. On a weight percent basis, 1%, 3%, 5%, and 10% POSS are added to the resin. Density calculations, stress-strain, and powder diffraction simulations are used to evaluate the macro-properties of these nanocomposites and compare them with the experimental findings reported in the literature. The observations from the simulation results when compared to the experimental results show that MDS can be efficiently used to design, analyze, and simulate new nanocomposites of POSS.

Novel Multifunctional Spherosilicate-Based Coupling Agents for Improved Bond Strength and Quality in Restorative Dentistry

The aim of this study was to investigate the restorative connections of composite materials after fracture, under controlled conditions of treating the materials with novel, spherosilicate-based (SS) primers bearing both methacryl (MA) and trimethoxysilyl (TMOS) groups. The chemistry of methacrylate group insertion and reactive groups hydrolysis has been studied with the aid of ¹H NMR (Nuclear Magnetic Resonance) spectroscopy. The light-cured resin composites were repaired by activating the connection site with the obtained primers and, for comparison, a silane (methacryloxypropyltrimethoxysilane, MATMOS) as a conventional coupling agent bearing the same reactive groups. The resistance of such a joint was tested in a three-point bending test after 24 h and 28 days period of sample conditioning. The effect of bond application was also studied, showing that spherosilicate-based primers may be used more effectively than MATMOS for two-step (primer-composite) restorative process, while for silane, the three-step process with bond application is crucial for satisfactory joint quality. The joint failure mode was determined by microscopic analysis and it was found that SS-4MA-4TMOS and SS-2MA-6TMOS application resulted in mostly composite, and not joint, failure. After 28 days of conditioning, the flexural strength of the joint repaired with SS-4MA-4TMOS was at 94% of the neat, solid material under the same procedure. However, the strength of the neat composite was observed to decline during the conditioning process by ~30%. The joint behavior was explained on the basis of the gradual hydrolysis effect (the greatest decrease being observed for silane).

High-Performance Dental Composites Based on Hierarchical Reinforcements

Use of high-performance fibers such as poly(p-phenylene-2,6-benzobisoxazole) (PBO) improves the mechanical properties of dental fiber-reinforced composites (FRCs). However, the surfaces of high-performance fibers are relatively inert, and the interface with the resin matrix is poor. This has become a limitation restricting the performance of PBO FRCs in dentistry. Nanomaterials were introduced onto PBO fibers to construct various hierarchical reinforcements to obtain a dental FRC with higher flexural performance and optimized interface bonding. Four hierarchical reinforcements were constructed: PBO-ZnO nanoparticles (NPs), PBO-ZnO nanowires (NWs), PBO-ZnO NPs–cage silsesquioxane (POSS), and PBO-ZnO NWs-POSS. Performance following this optimized method was evaluated at macroscale and microscale levels, including measurement of the interfacial properties and mechanical properties of FRCs. The physicochemical characteristics of PBO fibers before and after modification were measured to determine the interfacial bonding mechanisms and to verify the connection between the microinterface and macromechanical properties. The cytotoxicity of the preferred PBO FRC was evaluated using the CCK8 assay. In comparison to other designs, the interfacial shear strength (IFSS) of PBO-ZnO NWs-POSS was the highest (29.31 ± 2.40 MPa). The corresponding FRC had the highest flexural strength under a static load (925.0 ± 39.2 MPa), the flexural modulus (39.39 ± 1.41 GPa) was equivalent to that of human dentin, and in vitro cytotoxicity was acceptable. The interfacial bonding mechanisms of PBO-ZnO NWs-POSS resulted from mechanical interlocking, chemical bonds, hydrogen bonds, and van der Waals forces. In summary, the PBO-ZnO NWs-POSS hierarchical reinforcement was introduced in dental FRCs and showed remarkable enhancement of the IFSS and flexural properties. We verified that the PBO-ZnO NWs-POSS hierarchical reinforcement was successful. This PBO FRC may be applied in dentistry as a new option for endodontic posts. Our study provides an interface design strategy for developing high-performance FRCs reinforced with high-performance fibers for dental applications.

Characterization of Methacrylate-Based Resins Containing Methacryl-Polyhedral Oligomeric Silsesquioxanes (MA-POSS-8)

The use of functionalized dental adhesives that might prevent degradation of the dentin hybrid layer has been proposed. The aim of the study was to characterize the physicochemical properties and the potential to induce mineral precipitation of methacrylate-based resins containing methacryl-functionalized polyhedral oligomeric silsesquioxane (MA-POSS-8). In total, six different compositions of resins based on bisphenol A glycerolate dimethacrylate (BisGMA, 40 to 60 wt.%), triethylene glycol dimethacrylate (TEGDMA, 5 to 35 wt.%) and 2-hydroxyethyl methacrylate (HEMA, 25 or 35 wt.%) were prepared and infiltrated with 5 wt.% MA-POSS-8. Unfilled resins served as control. Degree of conversion, viscosity, Martens hardness, indentation modulus, water sorption, and sol fraction were investigated. Polymerized specimens were examined by SEM/EDX for the presence of Ca/P precipitates after immersion in artificial saliva for 28 days at 37 °C. Statistical analysis was performed with two-way ANOVA and Tukey’s post-hoc test (p < 0.05). The degree of conversion ranged from 55.0 to 59.8% and was not affected by the addition of MA-POSS-8. Viscosity ranged from 60.0 to 422.3 mPa*s and was not affected by MA-POSS-8 except for one methacrylate-based resin with 60 wt.% BisGMA. Martens hardness and indentation modulus ranged from 161.3 to 138.1 N/mm² and 4.2 to 3.9 kN/mm² and were affected by MA-POSS-8 in only one resin (50 wt.% BisGMA, 25 wt.% TEGDMA, 25 wt.% HEMA). Water sorption was not affected by MA-POSS-8; sol fraction was below the detection limit. Formation of Ca/P precipitates was observed on all specimens of test and control groups. Material properties were not affected adversly by MA-POSS-8 except for slight differences in Martens Hardness, indentation modulus, viscosity, in some groups.

Dental Restorative Materials for Elderly Populations

The incidence of dental caries, especially root caries, has risen in elderly populations in recent years. Specialized restorative materials are needed due to the specific site of root caries and the age-related changes in general and oral health in the elderly. Unfortunately, the restorative materials commonly used clinically cannot fully meet the requirements in this population. Specifically, the antibacterial, adhesive, remineralization, mechanical, and anti-aging properties of the materials need to be significantly improved for dental caries in the elderly. This review mainly discusses the strengths and weaknesses of currently available materials, including amalgam, glass ionomer cement, and light-cured composite resin, for root caries. It also reviews the studies on novel anti-caries materials divided into three groups, antimicrobial, remineralization, and self-healing materials, and explores their potential in the clinical use for caries in the elderly. Therefore, specific restorative materials for caries in the elderly, especially for root caries, need to be further developed and applied in clinical practice.

Retentive Characteristics of a Polyetheretherketone Post-Core Restoration with Polyvinylsiloxane Attachments

A new application of a polyetheretherketone (PEEK) post-core restoration combined with polyvinylsiloxane (PVS) attachments was proposed and substantiated. This study aimed to evaluate retentive characteristics of the PEEK post-core restoration with PVS attachment systems. Specimens with PVS attachments were fabricated to evaluate retention force during 10,000 cyclic dislodgements. Additionally, the retention forces of PVS attachments with three different values of Shore hardness were further measured before and after aging treatments. The results of cyclic dislodgement test indicated a strong negative linear relationship between the cyclic times and retention force (p < 0.0001, r = −0.957). Furthermore, the retention forces of the PVS were significantly improved with Shore hardness increased, which was also affected by the aging treatment (F (2, 138) = 10.95, p < 0.0001). Therefore, the PEEK post-core restoration with PVS attachments exhibited the favorable retention force, which could be a promising alternative for dental prostheses.

Use of Protein Repellents to Enhance the Antimicrobial Functionality of Quaternary Ammonium Containing Dental Materials

An advancement in preventing secondary caries has been the incorporation of quaternary ammonium containing (QAC) compounds into a composite resin mixture. The permanent positive charge on the monomers allows for electrostatic-based killing of bacteria. Spontaneous adsorption of salivary proteins onto restorations dampens the antimicrobial capabilities of QAC compounds. Protein-repellent monomers can work with QAC restorations to achieve the technology's full potential. We discuss the theory behind macromolecular adsorption, direct and indirect characterization methods, and advances of protein repellent dental materials. The translation of protein adsorption to microbial colonization is covered, and the concerns and fallbacks of the state-of-the-art protein-resistant monomers are addressed. Last, we present new and exciting avenues for protein repellent monomer design that have yet to be explored in dental materials.

Preparation of Tri(alkenyl)functional Open-Cage Silsesquioxanes as Specific Polymer Modifiers

The scientific reports on polyhedral oligomeric silsesquioxanes are mostly focused on the formation of completely condensed T₈ cubic type structures and recently so-called double-decker derivatives. Herein, we report on efficient synthetic routes leading to trifunctionalized, open-cage silsesquioxanes with alkenyl groups of varying chain lengths from -vinyl to -dec-9-enyl and two types of inert groups (iBu, Ph) at the silsesquioxane core. The presented methodology was focused on hydrolytic condensation reaction and it enabled obtaining titled compounds with high yields and purity. A parallel synthetic methodology that was based on the hydrosilylation reaction was also studied. Additionally, a thorough characterization of the obtained compounds was performed, also in terms of their thermal stability, melting and crystallization temperatures (TGA and DSC) in order to show the changes in the abovementioned parameters dependent on the type of reactive as well as inert groups at Si-O-Si core. The presence of unsaturated alkenyl groups has a profound impact on the application potential of these systems, i.e., as modifiers or comonomers for copolymerization reaction.

Hyperbranched Poly(ether-siloxane)s Containing Ammonium Groups: Synthesis, Characterization and Catalytic Activity

In this article we report an easy synthetic route towards hyperbranched polyglycerols (Amm-HBPGs) containing trimethylammonium groups and siloxane or hydroxyl end-groups. Siloxane derivatives of Amm-HBPGs were synthesized in an efficient five-step procedure including an anionic ring opening copolymerization of the phthalimide-epoxy monomer with glycidol, followed by reactions with allyl bromide, hydrosililation with hydrogenheptamethyltrisiloxane, hydrazinolysis of phthalimide groups and quaternization of resulting amine groups with methyl iodide. Hydroxyl derivatives were obtained by quaternization of previously reported aminated HBPG’s with methyl iodide. Polymeric products were characterized using various NMR techniques, FTIR, and elemental analysis. Both Amm-HBPGs were shown to be effective in catalysis of addition of CO2 to oxirane. The hydrophilic catalysts showed higher efficiency but synthesis of ethylene carbonate was accompanied by formation of small amounts of ethylene glycol. The siloxane-containing catalyst was easily separable from reaction mixture showing high potential in the process of converting carbon dioxide into valuable chemical raw materials.