Exploring NIR Aza-BODIPY-Based Polarity Sensitive Probes with ON-and-OFF Fluorescence Switching in Pluronic Nanoparticles

Improving the spatial resolution and signal-to-noise ratio of ultrasound switchable fluorescence imaging

Ultrasound switchable fluorescence (USF) imaging, a hybrid imaging technology that combines the advantages of both fluorescence sensitivity and acoustic resolution in centimeter-deep tissue, has great potential for biomedical different applications. A camera-based USF imaging system reveals its capability of capturing both spatial and temporal dynamics of the USF signal in tissue. In this study, various algorithms were explored to enhance the spatial resolution and signal-to-noise ratio (SNR) of USF images, utilizing temporal and spatial information from a camera-based time-domain USF imaging system. The correlation method proved effective in boosting SNR, while the ascending-slope-weighted method enhanced spatial resolution. Additionally, the spatially back-projection method significantly improved spatial resolution in silicone phantoms. The results underscore the advantages of incorporating temporal and spatial information from USF signals.

Ultrasound-switchable fluorescence thermometry with dual detection channels using temperature-sensitive liposomes

Temperature measurements in biological tissues play a crucial role in studying metabolic activities. In this study, we introduce a noninvasive thermometry technique based on two-color ultrasound-switchable fluorescence (USF). This innovative method allows for a local temperature mapping within a microtube filled with temperature-sensitive liposomes as nano imaging agents. By measuring the temperature-dependent fluorescence emission of the liposomes using a spectrometer, we identify four characteristic temperatures. The local background temperature can be estimated by analyzing the corresponding appearance time of these four characteristic temperatures in the dynamic USF signals captured by a camera-based USF system with two detection channels. Simultaneous measurements with an infrared (IR) camera showed a 0.38°C ± 0.27°C difference between USF thermometry and IR thermography in a physiological temperature range of 36.48°C-40.14°C. This shows that the two-color USF thermometry technique is a reliable, noninvasive tool with excellent spatial and thermal resolution.

Non-destructive real-time monitoring and investigation of the self-assembly process using fluorescent probes

Self-assembly has been considered as a strategy to construct superstructures with specific functions, which has been widely used in many different fields, such as bionics, catalysis, and pharmacology. A detailed and in-depth analysis of the self-assembly mechanism is beneficial for directionally and accurately regulating the self-assembly process of substances. Fluorescent probes exhibit unique advantages of sensitivity, non-destructiveness, and real-time self-assembly tracking, compared with traditional methods. In this work, the design principle of fluorescent probes with different functions and their applications for the detection of thermodynamic and kinetic parameters during the self-assembly process were systematically reviewed. Their efficiency, limitations and advantages are also discussed. Furthermore, the promising perspectives of fluorescent probes for investigating the self-assembly process are also discussed and suggested.

Substituent directed cellular imaging in the 800-850 nm range with BF2-azadipyrromethene fluorophores

Three bis(anilino)-substituted NIR-AZA fluorophores have been designed, synthesized and tested to bridge the availability gap of molecular fluorophores for live-cell microscopy imaging in the 800-850 nm spectral range. The concise synthetic route allows for the later stage introduction of three tailored peripheral substituents which guides the sub-cellular localization and imaging. Live-cell fluorescence imaging of lipid droplets, plasma membrane and cytosolic vacuoles was successfully achieved. Photophysical and internal charge transfer (ICT) properties of each fluorophore were examined through solvent studies and analyte responses.

Exploiting directed self-assembly and disassembly for off-to-on fluorescence responsive live cell imaging

A bio-responsive nanoparticle was formed by the directed self-assembly (DSA) of a hydrophobic NIR-fluorophore with poloxamer P₁₈₈. Fluorophore emission was switched off when part of the nanoparticle, however upon stimulus induced nanoparticle dis-assembly the emission switched on. The emission quenching was shown to be due to fluorophore hydration and aggregation within the nanoparticle and the turn on response attributable to nanoparticle disassembly with embedding of the fluorophore within lipophilic environments. This was exploited for temporal and spatial live cell imaging with a measurable fluorescence response seen upon intracellular delivery of the fluorophore. The first dynamic response, seen within minutes, was from lipid droplets with other lipophilic regions such as the endoplasmic reticulum, nuclear membranes and secretory vacuoles imageable after hours. The high degree of fluorophore photostability facilitated continuous imaging for extended periods and the off to on switching facilitated the real-time observation of lipid droplet biogenesis as they emerged from the endoplasmic reticulum. With an in-depth understanding of the principles involved, further assembly controlling functional responses could be anticipated.

Solvent-Dependent Fluorescence Properties of CH2-bis(BODIPY)s

Biocompatible luminophores based on organic dyes, which have fluorescence characteristics that are highly sensitive to the properties of the solvating medium, are of particular interest as highly sensitive, selective, and easy-to-use analytical agents. We found that BODIPY dimers (2,2'-, 2,3'-3,3'-CH₂-bis(BODIPY) (1-3)) demonstrate fluorescence characteristics with a high sensitivity to the presence of polar solvents. The intense fluorescence of 1-3 in nonpolar/low-polarity solvents is dramatically quenched in polar media (acetone, DMF, and DMSO). It has been established that the main reason for CH₂-bis(BODIPY) fluorescence quenching is the specific solvation of dyes by electron-donating molecules (Solv) with the formation of stable supramolecular CH₂-bis(BODIPY)·2Solv structures. Using steady-state absorption and fluorescence spectroscopy, time-resolved fluorescence spectroscopy, and computational modeling, the formation mechanism, composition, and structure of CH₂-bis(BODIPY)·2Solv supramolecular complexes have been substantiated, and their stability has been evaluated. The results show the promise of developing fluorescent probes based on CH₂-bis(BODIPY)s for detecting toxic N/O-containing compounds in solutions.

Aggregation behavior and spectroscopic properties of red-emitting distyryl-BODIPY in aqueous solution, Langmuir-Schaefer films and Pluoronic® F127 micelles

Red-emitting distyryl substituted BODIPY dyes are among the most promising luminophors for bioimaging and optics applications. However, the practical application of BODIPYs is limited due to their high hydrophobicity and tendency to aggregate in aqueous organic solutions and solid phase. In this article, we propose an elegant solution to this problem. To this end, we carried out the detailed experimental and quantum-chemical study of the structural and spectral features of BF₂-ms-phenyl-5,5'-bis(4-dimethylaminostyryl)-3,3'-dimethyl-2,2'-dipyrromethene (distyryl-BDP). The particular attention was paid to analysis of high sensitivity of the distyryl-BDP spectral characteristics to the solvent properties, and also the aggregation behavior features both in water-organic media and in mono- and multilayer Langmuir-Schaefer films. We selected the best conditions to obtain the hydrophilic micellar structures of distyryl-BDP with Pluronic® F127 having a high efficiency of dye solubilization. This method increasing the solubility improves the distyryl-BDP transport efficiency in physiological aqueous media. The aqueous solutions of distyryl-BDP-Pl micelles show the intense fluorescence in the phototherapy window region (λ_fl = 739 nm).

Thermo- and pH-sensitive nanoparticles of poly (N-isopropylacrylamide-decenoic acid-1-vinylimidazole) for ultrasound switchable fluorescence imaging

We herein report the synthesis of poly (9-decenoic acid-1-vinylimidazole-N-isopropylacrylamide) nanoparticles containing indocyanine green (ICG) in one pot and in water phase throughout the reaction. We have shown that copolymers of 9-decenoic acid and 1-vinylimidazole, or 9-decenoic acid alone, have an enhanced sensitivity to pH values between 7.4 and 6.8 and are superior to the widely used acrylic acid. We have also shown that incorporation of acidic comonomers leads to the favorable outcome of a higher fluorescence signal intensity in lower pH values, whereas the opposite is true of basic comonomers, where the fluorescence signal intensity is lower at low pH values. It was shown that to keep the pH response favorable the molar ratio of basic comonomers to acidic comonomers should roughly equal 1:4. We controlled the lower critical solution temperature (LCST) of the nanoparticles from around 30 to 38°C for different applications by adding acrylamide comonomers. Finally, the nanoparticles at varying pH values, when imaged by an ultrasound switchable fluorescence (USF) imaging system, showed pH sensitivity and thermosensitivity at physiological and tumor pH.

Fluorescent Polymers Conspectus

The development of luminescent materials is critical to humankind. The Nobel Prizes awarded in 2008 and 2010 for research on the development of green fluorescent proteins and super-resolved fluorescence imaging are proof of this (2014). Fluorescent probes, smart polymer machines, fluorescent chemosensors, fluorescence molecular thermometers, fluorescent imaging, drug delivery carriers, and other applications make fluorescent polymers (FPs) exciting materials. Two major branches can be distinguished in the field: (1) macromolecules with fluorophores in their structure and (2) aggregation-induced emission (AIE) FPs. In the first, the polymer (which may be conjugated) contains a fluorophore, conferring photoluminescent properties to the final material, offering tunable structures, robust mechanical properties, and low detection limits in sensing applications when compared to small-molecule or inorganic luminescent materials. In the latter, AIE FPs use a novel mode of fluorescence dependent on the aggregation state. AIE FP intra- and intermolecular interactions confer synergistic effects, improving their properties and performance over small molecules aggregation-induced, emission-based fluorescent materials (AIEgens). Despite their outstanding advantages (over classic polymers) of high emission efficiency, signal amplification, good processability, and multiple functionalization, AIE polymers have received less attention. This review examines some of the most significant advances in the broad field of FPs over the last six years, concluding with a general outlook and discussion of future challenges to promote advancements in these promising materials that can serve as a springboard for future innovation in the field.

Fluorescent chitosan-BODIPY macromolecular chemosensors for detection and removal of Hg2+ and Fe3+ ions

The detection of heavy metals, such as Hg2+ and Fe3+, is of great significance. In this work, fluorescent small-molecule BODIPY (BY-3) bearing CC group was synthesized firstly. And then, the chitosan-based polymer sensor CY-1 was synthesized through the spontaneous NH2/C≡C click reaction. The synthesized CY-1 can effectively bind and recognize Hg2+/Hg+ by the -C=N groups formed in the click reaction. Moreover, the macromolecular sensors CS-1 and CS-2 were synthesized by incorporating another recognition sites to CY-1. These synthesized macromolecular sensors can not only recognize Hg2+/Hg+, but also effectively recognize Fe3+/Fe2+. All of them exhibited significant quenching effect, visible to the naked eye under UV irradiation. The detection limit of CY-1 for Hg2+ was 1.51 × 10-6 mol/L, and the detection limit of CS-2 for Fe3+ was 2.30 × 10-6 mol/L. The BODIPY-chitosan sensors synthesized in this work have the functions of removing heavy metal ions besides the identifying ability. The maximum adsorption capacity of 1 g chitosan to Hg2+ was 108 mg as the best one. This article provides a new method to prepare macromolecular sensors for the detection and removal of heavy metal ions. As a useful natural polymer, chitosan's application scope was enlarged.

Near-infrared temperature-switchable fluorescence nanoparticles

Background

Near infrared (NIR) environment-sensitive fluorophores are highly desired for many biomedical applications because of its non-invasive operation, high sensitivity and specificity, non-ionizing radiation and deep penetration in biological tissue. When the fluorophores are appropriately encapsulated in or conjugated with some thermal-sensitive polymers, they could work as excellent temperature-sensing probes.

Methods

In this study, we synthesized and characterized a series of NIR temperature-switchable nanoparticles based on two series of NIR fluorophores aza-BODIPY (ADP is used for abbreviation in this work) and Zinc phthalocyanine (ZnPc) and four pluronic polymers (F127, F98, F68 and F38). Encapsulating the fluorophores in the polymers by sonication, we synthesized the nanoparticles that showed switch-like functions of the fluorescence intensity (and/or lifetime) as the temperature, with high switch on-to-off ratio. We also investigated various factors that might change the temperature thresholds (T_th) of the switch functions, in order to control T_th during synthesis.

Results

These nanoparticles showed excellent temperature-switchable properties of fluorescence intensity and/or lifetime. Meanwhile, some factors (i.e., pluronic categories and nanoparticles' concentration) significantly affected the nanoparticles' T_ths while other (i.e., fluorophore categories) that weakly affected T_ths.

Conclusions

By selecting appropriate pluronic categories and adjusting the nanoparticle's concentration, we can synthesize the nanoparticles with a wide range of T_ths. These temperature-switchable fluorescence nanoparticles can be used for biomedical imaging and in vivo tissue temperature sensing/imaging.