Hyperbranched Polycarbosiloxanes: Synthesis by Piers-Rubinsztajn Reaction and Application as Precursors to Magnetoceramics

Tris(pentafluorophenyl)borane-catalyzed Hydride Transfer Reactions in Polysiloxane Chemistry-Piers-Rubinsztajn Reaction and Related Processes

Tris(pentafluorophenyl)borane (TPFPB) is a unique Lewis acid that catalyzes the condensation between hydrosilanes (Si-H) and alkoxysilanes (Si-OR), leading to the formation of siloxane bonds (Si-OSi) with the release of hydrocarbon (R-H) as a byproduct-the so-called Piers-Rubinsztajn reaction. The analogous reactions of hydrosilanes with silanols (Si-OH), alcohols (R-OH), ethers (R-OR') or water in the presence of TPFPB leads to the formation of a siloxane bond, alkoxysilane (Si-OR or Si-OR') or silanol (Si-OH), respectively. The above processes, often referred to as Piers-Rubinsztajn reactions, provide new synthetic tools for the controlled synthesis of siloxane materials under mild conditions with high yields. The common feature of these reactions is the TPFPB-mediated hydride transfer from silicon to carbon or hydrogen. This review presents a summary of 20 years of research efforts related to this field, with a focus on new synthetic methodologies leading to numerous previously difficult to synthesize well-defined siloxane oligomers, polymers and copolymers of a complex structure and potential applications of these new materials. In addition, the mechanistic aspects of the recently discovered reactions involving hydride transfer from silicon to silicon are discussed in more detail.

A Comprehensive Review on Processing, Development and Applications of Organofunctional Silanes and Silane-Based Hyperbranched Polymers

Since the last decade, hyperbranched polymers (HBPs) have gained wider theoretical interest and practical applications in sensor technology due to their ease of synthesis, highly branched structure but dimensions within nanoscale, a larger number of modified terminal groups and lowering of viscosity in polymer blends even at higher HBP concentrations. Many researchers have reported the synthesis of HBPs using different organic-based core-shell moieties. Interestingly, silanes, as organic-inorganic hybrid modifiers of HBP, are of great interest as they resulted in a tremendous improvement in HBP properties like increasing thermal, mechanical and electrical properties compared to that of organic-only moieties. This review focuses on the research progress in organofunctional silanes, silane-based HBPs and their applications since the last decade. The effect of silane type, its bi-functional nature, its influence on the final HBP structure and the resultant properties are covered in detail. Methods to enhance the HBP properties and challenges that need to be overcome in the near future are also discussed.

The ultimate Lewis acid catalyst: using tris(pentafluorophenyl) borane to create bespoke siloxane architectures

The breadth of utility of a commercially available and stable strong Lewis acid catalyst, tris(pentafluorophenyl)borane, has been explored, highlighting its use towards a wide range of unique siloxane products and their corresponding applications. This article focuses on the variety of different outcomes that this impressive borane offers in controlled and selective manners by the variation of reaction conditions, precursor functionalities, reagent or catalyst loading, and the mechanistic considerations that contribute. With a predominant focus on the Piers-Rubinsztajn reaction and its modifications, tris(pentaflurophenyl)borane's utility is highlighted in the synthesis of linear, cyclic and macrocyclic siloxanes, aryl-/alkoxysiloxanes, and other bespoke products. The significance of the catalytic transformation within the field of siloxane chemistry is discussed alongside some of the challenges that arise from using the borane catalyst.

Porous Organic Polymers Derived from Ferrocene and Tetrahedral Silicon-Centered Monomers for Carbon Dioxide Sorption

Herein, we present two novel ferrocene-containing porous organic polymers, FPOP-1 and FPOP-2, by the Heck reactions of 1,1'-divinylferrocene with two tetrahedral silicon-centered units, i.e., tetrakis(4-bromophenyl)silane and tetrakis(4'-bromo-[1,1'-biphenyl]-4-yl)silane. The resulting materials possess high thermal stability and moderate porosity with the Brunauer-Emmer-Teller (BET) surface areas of 499 m2 g-1 (FPOP-1) and 354 m2 g-1 (FPOP-2) and total pore volumes of 0.43 cm3 g-1 (FPOP-1) and 0.49 cm3 g-1 (FPOP-2). The porosity is comparable to previously reported ferrocene-containing porous polymers. These materials possess comparable CO2 capacities of 1.16 mmol g-1 (5.10 wt%) at 273 K and 1.0 bar, and 0.54 mmol g-1 (2.38 wt%) at 298 K and 1.0 bar (FPOP-1). The found capacities are comparable to, or higher than many porous polymers having similar or higher surface areas. They have high isosteric heats of up to 32.9 kJ mol-1, proving that the affinity between the polymer network and CO2 is high, which can be explained by the presence of ferrocene units in the porous networks. These results indicate that these materials can be promisingly utilized as candidates for the storage or capture of CO2. More ferrocene-containing porous polymers can be designed and synthesized by combining ferrocene units with various aromatic monomers under this strategy and their applications could be explored.

Structural analysis of hyperbranched polyhydrocarbon synthesized by electrochemical polymerization

Structure of a hyperbranched polyhydrocarbon obtained by electrochemical polymerization was analyzed by various NMR techniques and modeling. The calculated physical properties from its bulk model system well matched with experimental results.

Use of Piers-Rubinsztajn Chemistry to Access Unique and Challenging Silicon Phthalocyanines

Axial functionalization is one mode that enables the solubility of silicon phthalocyanines (SiPcs). Our group observed that the use of typical axial functionalization methodologies on reaction of Cl₂SiPc with the chlorotriphenyl silane reagent unexpectedly resulted in the equal formation of triphenyl silyloxy silicon tetrabenzotriazacorrole ((3PS)-SiTbc) and the desired bis(tri-phenyl siloxy)-silicon phthalocyanine ((3PS)₂-SiPc). The formation of a (3PS)-SiTbc was unexpected, and the separation of (3PS)-SiTbc and (3PS)₂-SiPc was difficult. Therefore, in this study, we investigated the use of Piers-Rubinsztajn (PR) chemistry as an alternative method to functionalize the axial position of a SiPc to avoid the generation of a Tbc derivative. PR chemistry is a novel method to form a Si-O bond starting with a Si-H-based reactant and a -OH-based nucleophile enabled by tris(pentafluorophenyl)borane as a catalyst. The PR chemistry was screened on several fronts on how it can be applied to SiPcs. It was found that the process needs to be run in nitrobenzene at a molar ratio and at a particular temperature. To this end, the triphenylsiloxy derivative (3PS)₂-SiPc was produced and fully characterized, without the production of a Tbc derivative. In addition, we explored and outlined that the PR chemistry method can enable the formation of other SiPc derivatives that are inaccessible utilizing other established axial substitution chemistry methods such as (TM₃)₂-SiPc and (MDM)₂-SiPc. These additional materials were also physically characterized. The main conclusion is that the PR chemistry method can be applied to SiPcs and yield several alternative derivatives and has the potential to apply to additional macrocyclic compounds for unique derivative formation.

The Influence of Zinc Waste Filler on the Tribological and Mechanical Properties of Silicone-Based Composites

Silicones are often used for various types of coatings, but due to their poor mechanical properties, they often require modification to meet specific requirements. At the same time, various production processes throughout the world generate different types of waste, the disposal of which is harmful to the environment. One possible solution is to use production waste as a filler. In this paper, the authors investigated how the use of metallurgical production waste products as fillers changed the mechanical properties of silicone composites prepared by casting. Composite samples were characterized using tensile tests, resilience, pin-on-disc, Schopper–Schlobach abrasion, hardness, and density measurements. Based on the obtained results, the authors assessed the effect of each of the fillers used in different weight proportions. The results showed that the silicone composite filled with 5 wt% zinc dust showed the lowest decrease in tensile strength and Young’s modulus, with a simultaneous significant reduction in abrasion compared with the reference sample. This research shows that zinc waste can be successfully introduced into a silicone matrix in cases where it is important to reduce abrasive wear.

UV-Cured Transparent Silicone Materials with High Tensile Strength Prepared from Hyperbranched Silicon-Containing Polymers and Polyurethane-Acrylates

Flexibility and mechanical performance are essential for transparent silicone materials applied in some optical and electronic devices; however, the tensile strength of transparent silicone materials is fairly low. To overcome this problem, a kind of UV-cured transparent flexible silicone material with quite a high tensile strength and elongation at break was developed through UV-initiated thiol-ene reaction by hyperbranched silicon-containing polymers (HBPs) with a thiol substitute and acrylate-terminated polyurethanes. Unexpectedly, it is found that both the tensile strength and elongation at break of the transparent silicone materials are extraordinarily high, which can reach 3.40 MPa and 270.0%, respectively. The UV-cured materials have good UV resistance ability because their transmittance is still as high as 93.4% (800 nm) even when aged for 40 min in a UV chamber of 10.6 mW cm-2. They exhibit outstanding adhesion to substrates, and the adhesion to a glass slide, wood, and a tin plate is grade 1. The promising results encourage us to further improve the mechanical performance of flexible transparent silicone materials by effective chemical modification strategies with HBPs. An attempt was made to apply the UV-cured materials in a Gel-Pak box and it could be proved that the UV-cured materials may be one of the good candidates for use as packaging or protecting materials of optical or electronics devices such as the Gel-Pak product.

Janus ring siloxane: a versatile precursor of the extended Janus ring and tricyclic laddersiloxanes

All-cis-tetrasiloxycyclotetrasiloxanes (Janus ring siloxanes) were facilely prepared from all-cis-cyclotetrasiloxanetetraol or sodium cyclotetrasiloxane silanolates. Moreover, we demonstrated the synthesis of extended Janus rings, [RSi(OR')O]4, containing various functional groups, via the Piers-Rubinsztajn reaction using a Janus ring siloxane as a precursor. Remarkably, we discovered the formation of an unexpected all-cis tricyclic laddersiloxane as a by-product. These synthesized compounds can be potential monomers of well-defined cage silsesquioxanes, Janus-type nanomaterials, and porous materials.

Catalytic Synthesis of Oligosiloxanes Mediated by an Air Stable Catalyst, (C6F5)3B(OH2)

The utility of (C₆F₅)₃B(OH₂) as catalyst for the simple and environmentally benign synthesis of oligosiloxanes directly from hydrosilanes, is reported. This protocol offers several advantages compared to other methods of synthesizing siloxanes, such as mild reaction conditions, low catalyst loading, and a short reaction time with high yields and purity. The considerable H₂O-tolerance of (C₆F₅)₃B(OH₂) promoted a catalytic route to disiloxanes which showed >99% conversion of three tertiary silanes, Et₃SiH, PhMe₂SiH, and Ph₃SiH. Preliminary data on the synthesis of unsymmetrical disiloxanes (Si-O-Si') suggests that by modifying the reaction conditions and/or using a 1:1 combination of silane to silanol the cross-product can be favored. Intramolecular reactions of disilyl compounds with catalytic (C₆F₅)₃B(OH₂) led to the formation of novel bridged siloxanes, containing a Si-O-Si linkage within a cyclic structure, as the major product. Moreover, the reaction conditions enabled recovery and recycling of the catalyst. The catalyst was re-used 5 times and demonstrated excellent conversion for each substrate at 1.0 mol% catalyst loading. This seemingly simple reaction has a rather complicated mechanism. With the hydrosilane (R₃SiH) as the sole starting material, the fate of the reaction largely depends on the creation of silanol (R₃SiOH) from R₃SiH as these two undergo dehydrocoupling to yield a disiloxane product. Generation of the silanol is based on a modified Piers-Rubinsztajn reaction. Once the silanol has been produced, the mechanism involves a series of competitive reactions with multiple catalytically relevant species involving water, silane, and silanol interacting with the Lewis acid and the favored reaction cycle depends on the concentration of various species in solution.

Novel clickable and fluorescent poly(siloxane amine)s for reusable adhesives and reprocessable elastomers

A series of clickable and fluorescent poly(siloxane amine)s were firstly reported and used as dynamic adhesives and elastomers.