Synthesis and Properties of Moisture-Cured Reactive Polyurethane Containing Castor Oil and Oxime Compounds

Efficient Regulation of the Cross-Linking Structure in Polyurethane: Achieving Outstanding Processing and Mechanical Properties for a Wind Turbine Blade

Although epoxy resin has been extensively used in the field of wind turbine blades, polyurethane has attracted much attention in recent years, due to its potential value of better fatigue resistance, lower processing viscosity and higher strength than epoxy resin blades. Herein, we construct a dense cross-linking structure in polyurethane (PU) based on different amounts of hydroxypropyl methacrylate (HPMA) with low processing viscosity and excellent mechanical properties. By increasing the content of HPMA, the thermal stability of PU is enhanced, but the micro-morphology does not change significantly. When the content of HPMA is 50 g (in 200 g copolymer), the PU sample PH-50 exhibits a viscosity of 70 MPa·s and a gelation time of 120 min at 25 °C, which is sufficient to complete processes like pouring and filling. By post-curing the PH-50 at 80 °C for 2 h, the heat distortion temperature can reach 72 °C, indicating the increase of temperature resistance. The PU copolymers also have excellent mechanical and dynamic thermo-mechanical properties due to the cross-linking structure between PU chains and poly-HPMA chains. Additionally, the PU copolymer has excellent compatibility with various glass fiber fabrics (GFF), showing a good match in the vacuum infusion experiment and great properties in the mechanical test. By compounding PH-50 with GFF, the composite with high strength is easily prepared for a wind turbine blade in various positions. The tensile strengths of the composites are all over 1000 MPa in the 0° direction. Such composites are promising for the future development of wind turbine blades that meet the stringent requirements for outstanding processing and mechanical properties.

New Star-Shaped Polyether-Pentols (PEPOs) for Fabrication of Crosslinked Polyurethanes-Synthesis and Characterization

Polyether-pentols (PEPOs) were synthesized from glycidyl ethers and butylene oxide with the application of tripotassium salts of 2,2,6,6-tetrakis(hydroxymethyl)cyclohexanol (HMCH) activated 18C6 for ring-opening polymerization (ROP). The construction of the applied initiator system reflects the ability of crown ether to influence the degree of ion-pair separation with an increased activating effect. As a result formation of bi- or trimodal polymers was observed with molar masses in the range of (Mn = 1200-6000). The observed multi-fraction composition is prescribed to the formation of ionic aggregates with different reactivities during polymerization. The mechanism of the studied processes is discussed. The obtained PEPOs served for a crosslinked PUR synthesis, for which the hydrogen bond index for coupling of hard segments was calculated. Additionally, the range of phase separation was calculated that was higher for PUR-containing aromatic rings as the substituent.