Impact of Ergothioneine, Hercynine, and Histidine on Oxidative Degradation of Hyaluronan and Wound Healing

Polysaccharide hydrogels for skin wound healing

Advances in the development and utilization of polysaccharide materials are highly promising, offering prominent applications in the field of tissue engineering for addressing diverse clinical needs, including wound healing, bone regeneration, cartilage repair, and treatment of conditions such as arthritis. Novel polysaccharide materials are popular owing to their inherent stability, biocompatibility, and repeatability. This review presents an overview of the biomedical applications of natural polysaccharide hydrogels and their derivatives. Herein, we discuss the latest advancements in the fabrication, physicochemical properties, and biomedical applications of polysaccharide-based hydrogels, including chitosan, hyaluronic acid, alginate, and cellulose. Various processing techniques applicable to polysaccharide materials are explored, such as the transformation of polysaccharide hydrogels into electrospun nanofibers, microneedles, microspheres, and nanogels. Furthermore, the use of polysaccharide hydrogels in the context of wound-healing applications, including hemostatic effects, antimicrobial activities, anti-inflammatory properties, and promotion of angiogenesis, is presented. Finally, we address the challenges encountered in the development of polysaccharide hydrogels and outline the potential prospects in this evolving field.

Redox Properties of Mn(III)porphyrins in Hyaluronan Oxidative Degradation: Single Electron Transfer Mechanism

Cationic Mn(III)-meso-tetraarylporphyrin derivatives, substituted in para position with different size alkyl chains, were investigated to function as antioxidants in free-radical degradation of high-molar-mass hyaluronan by the methods of rotational viscometry and oximetry. The results of rotational viscometry showed that MnTM-4-PyP5+, MnTE-4-PyP5+, MnTPr-4-PyP5+, MnTPen-4-PyP5+ and MnTHep-4-PyP5+ showed high efficiency in decomposing H2O2, and reducing of peroxidized hyaluronan. When using oxygen electrode, MnTE-4-PyP5+, MnTPr-4-PyP5+, MnTPen-4-PyP5+, and MnTHep-4-PyP5+ applied to function as protective antioxidants in hyaluronan degradation, the uptake of dissolved oxygen from the reaction milieu was rapid, followed by continual increase in oxygen concentration up to the end of the measurement. However, when especially MnTE-4-PyP5+, MnTPr-4-PyP5+, and MnTPen-4-PyP5+ were examined as hyaluronan chain-breaking antioxidants, after short-term dissolved oxygen uptake, almost no increase in oxygen concentration was shown.

Development of 3D Printable Gelatin Methacryloyl/Chondroitin Sulfate/Hyaluronic Acid Hydrogels as Implantable Scaffolds

The development of biomaterials tailored for various tissue engineering applications has been increasingly researched in recent years; however, stimulating cells to synthesise the extracellular matrix (ECM) is still a significant challenge. In this study, we investigate the use of ECM-like hydrogel materials composed of Gelatin methacryloyl (GelMA) and glycosaminoglycans (GAG), such as hyaluronic acid (HA) and chondroitin sulphate (CS), to provide a biomimetic environment for tissue repair. These hydrogels are fully characterised in terms of physico-chemical properties, including compression, swelling behaviour, rheological behaviour and via 3D printing trials. Furthermore, porous scaffolds were developed through freeze drying, producing a scaffold morphology that better promotes cell proliferation, as shown by in vitro analysis with fibroblast cells. We show that after cell seeding, freeze-dried hydrogels resulted in significantly greater amounts of DNA by day 7 compared to the GelMA hydrogel. Furthermore, freeze-dried constructs containing HA or HA/CS were found to have a significantly higher metabolic activity than GelMA alone.

Exploring tear viscosity with quartz crystal microbalance technology

Tear viscosity is a critical property affecting tear distribution and ocular surface stability. While not widely established as a primary diagnostic marker, deviations from normal viscosity can impact ocular health, potentially contributing to conditions such as dry eye syndrome. Despite their importance, traditional viscometers require sample volumes that are not feasible to use with tear volume. This research introduces a novel Quartz Crystal Microbalance (QCM)-based method for tear viscosity measurement, offering a viscometer prototype that operates with minimal sample volumes. Human tear samples, solutions used in artificial eye drops, and various commercial eye drop brands were evaluated. Results show that the QCM method aligns with established viscosity ranges. The average viscosity of healthy human tears was found to be 1.73 ± 0.61 cP, aligning with the typical range of 1-10 cP. Variability in the viscosities of eye drop can be attributed to differences in their chemical compositions. The QCM method offers benefits such as reduced sample consumption and rapid results, enhancing understanding of tear dynamics for ocular health. Further research with larger sample sizes is needed to establish normative viscosity values in healthy individuals and those with dry eye syndrome, which is crucial for validating the device's clinical efficacy.

Pullulan-Based Hydrogels in Wound Healing and Skin Tissue Engineering Applications: A Review

Wound healing is a complex process of overlapping phases with the primary aim of the creation of new tissues and restoring their anatomical functions. Wound dressings are fabricated to protect the wound and accelerate the healing process. Biomaterials used to design dressing of wounds could be natural or synthetic as well as the combination of both materials. Polysaccharide polymers have been used to fabricate wound dressings. The applications of biopolymers, such as chitin, gelatin, pullulan, and chitosan, have greatly expanded in the biomedical field due to their non-toxic, antibacterial, biocompatible, hemostatic, and nonimmunogenic properties. Most of these polymers have been used in the form of foams, films, sponges, and fibers in drug carrier devices, skin tissue scaffolds, and wound dressings. Currently, special focus has been directed towards the fabrication of wound dressings based on synthesized hydrogels using natural polymers. The high-water retention capacity of hydrogels makes them potent candidates for wound dressings as they provide a moist environment in the wound and remove excess wound fluid, thereby accelerating wound healing. The incorporation of pullulan with different, naturally occurring polymers, such as chitosan, in wound dressings is currently attracting much attention due to the antimicrobial, antioxidant and nonimmunogenic properties. Despite the valuable properties of pullulan, it also has some limitations, such as poor mechanical properties and high cost. However, these properties are improved by blending it with different polymers. Additionally, more investigations are required to obtain pullulan derivatives with suitable properties in high quality wound dressings and tissue engineering applications. This review summarizes the properties and wound dressing applications of naturally occurring pullulan, then examines it in combination with other biocompatible polymers, such chitosan and gelatin, and discusses the facile approaches for oxidative modification of pullulan.

Highly gallol-substituted, rapidly self-crosslinkable, and robust chitosan hydrogel for 3D bioprinting

Although three-dimensional (3D) bioprinting is a promising technology for reconstructing artificial tissues and organs using bioink, there is a lack of a bioink that satisfies all requirements, including printability, gelation, mechanical properties, and cytocompatibility, Herein, a novel self-crosslinkable bioink derived from chitosan (CS) and gallic acid (GA) is presented. 3D printed scaffolds with excellent shape fidelity are realized by systematically analyzing the self-crosslinking mechanism of hydrogel formation from CS-GA conjugates and by optimizing various parameters of the printing process. The CS-GA hydrogel forms rapidly in a physiological pH without any chemical crosslinking agent. In addition, the CS-GA hydrogel exhibited various physical and chemical intermolecular interactions, fast gelation rates, and excellent mechanical properties (>337 kPa). Moreover, the CS-GA hydrogel singificantly improves the cell viability (>92 %) and proliferation of the bioink. Therefore, the self-crosslinkable CS-GA bioink has great potential to overcome the limitations of conventional bioinks.

Anti-Inflammatory Effects of the 35kDa Hyaluronic Acid Fragment (B-HA/HA35)

Background

Hyaluronic acid (HA) and HA fragments interact with a variety of human body receptors and are involved in the regulation of various physiological functions and leukocyte trafficking in the body. Accordingly, the development of an injectable HA fragment with good tissue permeability, the identification of its indications, and molecular mechanisms are of great significance for its clinical application. The previous studies showed that the clinical effects of injectable 35kDa B-HA result from B-HA binding to multiple receptors in different cells, tissues, and organs. This study lays the foundation for further studies on the comprehensive clinical effects of injectable B-HA.

Methods

We elaborated on the production process, bioactivity assay, efficacy analyses, and safety evaluation of an injectable novel HA fragment with an average molecular weight of 35 kDa (35 kDa B-HA), produced by recombinant human hyaluronidase PH20 digestion.

Results

The results showed that 35 kDa B-HA induced human erythrocyte aggregation (rouleaux formation) and accelerated erythrocyte sedimentation rates through the CD44 receptor. B-HA application and injection treatment significantly promoted the removal of mononuclear cells from the site of inflammation and into the lymphatic circulation. At a low concentration, 35 kDa B-HA inhibited production of reactive oxygen species and tumor necrosis factor by neutrophils; at a higher concentration, 35 kDa B-HA promoted the migration of monocytes. Furthermore, 35 kDa B-HA significantly inhibited the migration of neutrophils with or without lipopolysaccharide treatment, suggesting that in local tissues, higher concentrations of 35 kDa B-HA have antiinflammatory effects. After 99mTc radiolabeled 35 kDa B-HA was intravenously injected into mice, it quickly entered into the spleen, liver, lungs, kidneys and other organs through the blood circulation.

Conclusion

This study demonstrated that the HA fragment B-HA has good tissue permeability and antiinflammatory effects, laying a theoretical foundation for further clinical studies.

A new chitosan-based thermosensitive nanoplatform for combined photothermal and chemotherapy

Targeting the delivery of anti-cancer drugs to a tumor site is essential for effective treatment and to ensure minimal damage to healthy cells and tissues. In this work, a chitosan-based nanoplatform was constructed for combined photothermal therapy and chemotherapy of breast cancer. The pH-sensitive and biocompatible biopolymer chitosan (CS) was grafted with N-vinylcaprolactam (NVCL) and modified with biotin (Bio), imparting it with temperature sensitive property and also the ability for active targeting. The polymer self-assembled to give nanoparticles (NPs) loaded with indocyanine green (ICG) and doxorubicin (DOX). When the NPs are exposed to near-infrared (NIR) laser irradiation, ICG converts the light to heat, inducing a significant phase transition in the NPs and facilitating the release of the drug cargo. In addition, the solubility of chitosan is increased in the slightly acidic microenvironment of the tumor site, which also promotes drug release. A detailed analysis of the NPs both in vitro and in vivo showed that the carrier system is biocompatible, while the drug-loaded NPs are selectively taken up by cancer cells. Particularly when augmented with NIR irradiation, this leads to potent cell death in vitro and also in an in vivo murine xenograft model of breast cancer.

A comparative study on cross-linking of fibrillar gel prepared by tilapia collagen and hyaluronic acid with EDC/NHS and genipin

Chemical cross-linking is an important step to grant satisfying properties to collagen-based materials. However, there are few comparative studies on crossing-linking of collagen-based fibrillar gels which are preferred biomaterials for similar properties to native tissues with different cross-linking agents. In this study, a fibrillar gel was fabricated with tilapia collagen and hyaluronic acid, and cross-linking conditions with EDC/NHS and genipin were discussed. Genipin gave gels much higher equilibrium cross-linking degree than EDC/NHS. ATR-FTIR and XPS showed EDC/NHS offered short-range cross-linking formed by amino and carboxyl groups in fibrils, while genipin induced long-range cross-linking by nucleophilic reaction through attack of amino groups in fibrils on carbon atoms at C-3 as well as ester groups in genipin, besides improved hydrogen bonds. XRD and SEM revealed the structural integrity of gels was strengthened after cross-linking, whereas fibril bundles disaggregated into thin fibrils. Consequently, swelling capacity and anti-degraded property were enhanced significantly, while thermal stability weakened. The fibrillar gels had good biocompatibility, but interestingly the appearance and migration of L929 fibroblasts were influenced by cross-linking degree. These results demonstrated that aquatic collagen-based fibrillar gel cross-linked by genipin had greater potential in biomaterials than EDC/NHS, whereas the cross-linking degree should be controlled.

Hyaluronan interactions with cationic surfactants - Insights from fluorescence resonance energy transfer and anisotropy techniques

Interactions of hyaluronan with micelles formed by cationic surfactants were studied by the time-resolved measurement of fluorescence resonance energy transfer (FRET) using perylene and fluorescein as probes. Two surfactants were studied - Cetyltrimethylammonium bromide (CTAB) and Septonex. In pure micellar solutions, the same values of FRET efficiency were found for both surfactants, but values for the binding of the probe pair were lower for Septonex micelles than in the case of CTAB. This was attributed to steric effects of the carbethoxy group in the Septonex polar head. Upon the addition of hyaluronan, decreased FRET efficiency and increased binding were detected in comparison with pure surfactants. To resolve the structure of the formed aggregates, steady state and time-resolved fluorescence anisotropy was employed as an additional technique. All results indicated that cationic micelles bind to hyaluronan forming a pearl necklace structure with micelles of smaller size compared to pure surfactant. Besides theoretical interest, the studied polyelectrolyte-surfactant system may be interesting for the formulation of drug delivery systems.

Fabrication and assessment of a novel hybrid scaffold consisted of polyurethane-gellan gum-hyaluronic acid-glucosamine for meniscus tissue engineering

The meniscus has inadequate intrinsic regenerative capacity and its damage can lead to degeneration of articular cartilage. Meniscus tissue engineering aims to restore an injured meniscus followed by returning its normal function through bioengineered scaffolds. In the present study, the structural and biological properties of 3D-printed polyurethane (PU) scaffolds dip-coated with gellan gum (GG), hyaluronic acid (HA), and glucosamine (GA) were investigated. The optimum concentration of GG was 3% (w/v) with maintaining porosity at 88.1%. The surface coating of GG-HA-GA onto the PU scaffolds increased the compression modulus from 30.30 kPa to 59.10 kPa, the water uptake ratio from 27.33% to 60.80%, degradation rate from 5.18% to 8.84%, whereas the contact angle was reduced from 104.8° to 59.3°. MTT assay, acridine orange/ethidium bromide (AO/EB) fluorescent staining, and SEM were adopted to assess the behavior of the seeded chondrocytes on scaffolds, and it was found that the ternary surface coating stimulated the cell proliferation, viability, and adhesion. Moreover, the coated scaffolds showed higher expression levels of collagen II and aggrecan genes at day 7 compared to the control groups. Therefore, the fabricated PU-3% (w/v) GG-HA-GA scaffold can be considered as a promising scaffold for meniscus tissue engineering.

Fabrication and characterization of biaxially electrospun collagen/alginate nanofibers, improved with Rhodotorula mucilaginosa sp. GUMS16 produced exopolysaccharides for wound healing applications

Fabrication of scaffolds with enhanced mechanical properties and desirable cellular compatibility is critical for numerous tissue engineering applications. This study was aimed at fabrication and characterization of a nanofiber skin substitute composed of collagen (Col)/sodium alginate (SA)/ polyethylene oxide (PEO)/Rhodotorula mucilaginosa sp. GUMS16 produced exopolysaccharides (EPS) were prepared using the biaxial electrospinning technique. This study used collagen extracted from the bovine tendon as a natural scaffold, sodium alginate as an absorber of excess wound fluids, and GUMS16 produced exopolysaccharides as an antioxidant. Collagen was characterized using FTIR and EDS analyses. The cross-linked nanofibers were characterized by SEM, FTIR, tensile, contact-angle, swelling test, MTT, and cell attachment techniques. The average diameter of Col nanofiber was 910 ± 89 nm. The Col and Col-SA/PEO non-woven mats' water contact angle measurement was 41.6o and 56.4o, Col/EPS1%, Col/EPS2%, Col-SA/PEO + EPS1%, and Col-SA/PEO + EPS2% were 61.4o, 58.3o, 38.5o, and 50.6o, respectively. Cell viability of more than 100% was shown in Col-SA/PEO + EPS nanofibers. Also, SEM images of cells on nanofiber scaffolds demonstrated that all nanofibers incorporated with GUMS16-produced EPS have good cell growth and proliferation. The acquired results expressed that the GUMS16-produced EPS can be considered a novel biomacromolecule in electrospun fibers that increase cell viability and proliferation.

Photopolymerizable chitosan hydrogels with improved strength and 3D printability

Chitosan hydrogel have presented great potential in biomedical applications due to its biocompatibility, biodegradability and characteristic similarity to native extracellular matrix. However, 3D printing of chitosan hydrogel often suffers from weak formability and poor mechanical property, limiting its further utilization. In this study, a novel chiotsan hydrogel is prepared from maleic chitosan (MCS) with high acrylate group substitution (i.e. 1.67) and thiol-terminated poly (ethylene glycol) (TPEG) via step-chain growth photopolymerization approach, which can overcome significantly the oxygen inhibition effect. Rheological property, microstructure, mechanical properties and in vitro degradation can be regulated by changing the thiol/acrylate molar ratio. There is strong intermolecular action between MCS and TPEG. Notably, photopolymerized MCS/TPEG hydrogel exhibited ~2-fold and ~ 10-fold increase in gelling rate and compressive strength, respectively, compared to pure chitosan hydrogel. Based on these results, 3D printing of chitosan hydrogel fabricated by simultaneous extrusion deposition and thiol-acrylate photopolymerization, demonstrates printing accuracy and improved scaffold stability. This 3D printing of chitosan hydrogel shows no cytotoxicity and can support adherence of L929 cells, suggesting its potential in biomedical applications such as tissue engineering and drug delivery.

Design, preparation and in vitro characterization of biomimetic and bioactive chitosan/polyethylene oxide based nanofibers as wound dressings

Chitosan-based nanofibers (CS-NFs) are excellent artificial extracellular matrices (ECMs) due to the resemblance of CS with the glycosaminoglycans of the natural ECMs. Despite this excellent feature, the poor electrospinnability and mechanical properties of CS are responsible for important limitations in respect to its biomedical applications. To improve the CS's physico-chemical properties, new bioactive and biomimetic CS-NFs were formulated with polyethylene oxide (PEO), having incorporated different active components (ACs) with important beneficial effects for healing. Manuka honey (trophic and antimicrobial effects), propolis (antimicrobial effects), Calendula officinalis infusion (antioxidant effect, reepithelialization stimulating agent), insulin (trophic effect), and L-arginine (angiogenic effect) were selected as ACs. SEM morphology analysis revealed well-alignment, unidirectional arrays, with small diameters, no beads, and smooth surfaces for developed CS_PEO-ACs NFs. The developed NFs showed good biodegradability (NFs mats lost up to 60% of their initial weight in PBS), increased hemocompatibility (hemolytic index less than 4%), and a reduced cytotoxicity degree (cell viability degree more than 90%). In addition, significant antioxidant and antimicrobial effects were noted for the developed NFs which make them suitable for chronic wounds, due to the role of oxidative stress and infection risk in delaying normal wound healing. The most suitable for wound healing applications seems to be CS_PEO@P_C which showed an improved hemolysis index (2.92 ± 0.16%), is non-toxic (cell viability degree more than 97%), and has also significant radical scavenging effect (DPPH inhibition more than 65%). In addition, CS_PEO@P_C presents increased antimicrobial effects, more noticeably for Staphylococcus aureus strain, which is a key feature in preventing wound infection and delaying the healing process. It can be concluded that the developed CS/PEO-ACs NFs are very promising biomaterials for wound care, especially CS_PEO@P_C.

NIR as a "trigger switch" for rapid phase change, on-demand release, and photothermal synergistic antibacterial treatment with chitosan-based temperature-sensitive hydrogel

Temperature-sensitive hydrogels have shown good performances as wound dressing owing to their ability to fill wounds in the liquid state and to release drugs in a solid state. However, their treatment efficiency is restricted by the phase transition time. In this study, we developed a photothermal synergistic chitosan-based temperature-sensitive hydrogel, h-EGF-CS/β-GP-MPDA@Cip, with the unique properties of rapid phase transition and drug release under near-infrared light (NIR). High antibacterial efficiency was achieved when we covered infected mice wounds with hydrogels. The local high temperature produced under NIR illumination not only accelerated the formation of a porous gel to release the loaded drug on-demand, but also dissolved bacteria, achieving synergistic anti-bacterial treatment. In addition, the healing cycle of wounds could be significantly shortened by adding human epidermal growth factor (h-EGF) in the hydrogel. Overall, the developed temperature-sensitive hydrogel could utilise NIR as a "trigger switch" for on-demand drug release and photothermal-enhanced antibacterial treatment during the rapid phase change process.

A Prospective, Observational Registry Study to Evaluate Effectiveness and Safety of Hyaluronic Acid-Based Dermal Fillers in Routine Practice: Interim Analysis Results with One Year of Subject Follow-Up

Background

Monitoring the effectiveness, safety and emerging uses of hyaluronic acid (HA) fillers in their wide range of indications requires a holistic approach.

Purpose

To propose an observational study design aiming to gather real-world evidence (RWE) and continuously evaluate the performance and safety of marketed devices in routine practice.

Materials and Methods

A prospective, observational registry was initiated at six European sites. Investigators enrolled any subject receiving at least one injection with a target study device (TEOSYAL Deep Lines [HA_DL] and/or Global Action [HA_GA]). They followed their routine practice regarding injection technique, volume, and subject follow-up. Effectiveness was evaluated at 3 months using the global aesthetic improvement scale (GAIS). Safety was assessed based on common treatment reactions (CTR) and adverse events (AE).

Results

High quantity of RWE was collected following the initiation of this registry. In the first 158 subjects enrolled, 1220 injections were performed in more than 25 indications, including 679 with the target devices and 271 with devices of the same filler line. The primary objective was achieved, with 93.9% of treatments providing improvement at Month 3 according to the PI and subject. Post-injection CTR were mild to moderate and short-lived, and there was no clinically significant AE. More than 76% of treatments still provided some visible effect at month 12.

Conclusion

Based on RWE, HA_DL and HA_GL are effective and safe in their respective indications mostly distributed in the midface, perioral region, and lower face. Observational registries are a valuable asset in the context of post-market clinical follow-up.

Development of chitosan/poly (vinyl alcohol)/graphene oxide loaded with vanadium doped titanium dioxide patch for visible light driven antibacterial activity and accelerated wound healing application

Wound healing is a multi-stage process that is dynamic, interactive, and complicated. However, many nanomaterials are employed to expedite wound healing by demonstrating antibacterial activity or boosting cell proliferation. But only one phase is focused during the wound healing process. As a result, there is a need for optimum wound dressing materials that promotes different wound healing cascades with ideal properties. Herein, Graphene Oxide loaded with vanadium (V) doped titanium dioxide (TiO₂) blended with chitosan, and polyvinyl alcohol (CS/PVA/GO/TiO₂-V) patch was developed for wound healing. XRD, FTIR and FE-SEM analyses were carried out to study the morphology and structural property of the patch. The fabricated patch has a high surface porosity, excellent moisture vapor transfer rate, appropriate swelling behaviour, and oxygen permeability, which results in an excellent moist environment for wound breathing and effective management of wound exudates. The antibacterial test showed significant antibacterial efficacy against wound infections in the presence of light when compared to dark. In-vitro analysis such as hemocompatibility, cytotoxicity, cell adhesion, and scratch assay show the predicted potential wound healing application with high biocompatibility. These results suggest that CS/PVA/GO/TiO₂-V patch provides a microenvironment favourable to cells' growth and differentiation and positively modulates full-thickness wounds' healing.

Exploring the role of chitosan in affecting the adhesive, rheological and antimicrobial properties of carboxymethyl cellulose composite hydrogels

Natural polysaccharide-based hydrogels are promising in food and pharmaceutical applications. In this study, the potential of composite hydrogels prepared by carboxymethyl cellulose (CMC) and chitosan as glue for cigar wrapping applications was firstly studied. The impacts of degree of carboxymethyl substitution (DS) and the ratio of CMC:chitosan on the adhesive performance and rheological behaviors of composite hydrogels have been investigated. And the results indicated that relatively low DS of CMC and relatively low ratio of chitosan might be favorable for the adhesive properties of composite hydrogels. But a higher ratio of chitosan may significantly improve the rheological properties of composite hydrogels and alter their thermal-sensitivity. The impacts of chitosan on the wet ability with tobacco leaf, the morphology and the XRD patterns of composite hydrogels were also observed. The CMC-chitosan composite hydrogel could significantly decrease the total molds on tobacco leaf brought by CMC, and therefore may show great potential to improve the quality of cigar during long-term storage. All the information in this study is new, which could be useful for exploring the application of CMC-chitosan composite hydrogel in food, pharmaceutical, even other fields.

Multifunctional palygorskite@ZnO nanorods enhance simultaneously mechanical strength and antibacterial properties of chitosan-based film

A general and effective strategy was developed for improving simultaneously the mechanical strength and antibacterial performance of biopolymer-based films. The well-dispersed zinc oxide (ZnO) nanoparticles were in-situ loaded on non-toxic natural palygorskite (PAL) nanorod to form an antibacterial PAL@ZnO composite nanorod, which can be embedded into chitosan/gelatin (CS/GL) film to produce the composite films with noticeably enhanced mechanical properties and antibacterial activity against S. aureus and E. coli bacteria (inhibition zones are 21.82 ± 0.95 mm and 16.36 ± 1.64 mm, respectively). The toughness of films enhances to 35.13 ± 0.95 MPa and the moisture uptake decreases to 23.74 ± 0.02% after embedding 3% and 9% of PAL@ZnO, respectively. In addition, incorporating PAL@ZnO nanorods also significantly enhanced the water resistance, and thermal stability of film. This work provides an alternative way for the development of antibacterial films with potential applications in many fields such as food packing.

Assessment of the Substance Antioxidative Profile by Hyaluronan, Cu(II) and Ascorbate

In the minireview presented here, the authors discuss the evaluation of inhibitory effect of substances in the phases of initiation and propagation of high-molar-mass hyaluronan oxidative degradation. The experimental approach should be considered as original since on using a simple experimental assay it is possible to prove both the so-called “preventive” and “chain-breaking” antioxidant activity of investigated water-soluble endo- or exogenous substances.

Hyaluronic acid-functionalized poly-lactic acid (PLA) microfibers regulate vascular endothelial cell proliferation and phenotypic shape expression

This work was designed to evaluate the efficacy of hyaluronic acid (HA) functionalized tubular poly-lactic acid (PLA) microfibers in directing the luminal pre-endothelialization of vascular endothelial cells (ECs). Tubular HA/PLA microfibers with hierarchical architecture were prepared by electrospinning and chemical cross-linking process. A layer of HA microfibrous film coating was fixed on the inner wall surface of the tubular HA/PLA microfibers, resulting in higher anisotropy wettability and relatively lower surface energy and roughness. We confirmed that HA coating on PLA microfibers surface have reduced hemolytic activity and coagulation degree. Mouse vascular ECs exhibited surface-dependent differences in cell elongation and proliferation (HA/PLA > PLA). Compared with PLA microfibers, the gene expression levels of platelet EC adhesion molecule-1 (PECAM-1/CD31) and vascular endothelial growth factor (VEGF) in ECs of HA/PLA microfibers surface were up-regulated. Immunostaining analysis revealed that the surface of HA/PLA nanofibers supported the expression of mature vascular EC phenotype CD31 protein. In vitro co-culture analysis showed that the luminal pre-endothelialization induced vascular smooth muscle cells (SMCs) to maintain their phenotypic shape and establish natural behavior patterns in the hierarchical tubular scaffold. These studies indicate that the biophysical cues of scaffolds are potent regulators of vascular EC endothelialization.

Preclinical efficacy study of a porous biopolymeric scaffold based on gelatin-hyaluronic acid-chondroitin sulfate in a porcine burn injury model: role of critical molecular markers (VEGFA, N-cadherin, COX-2), gamma sterilization efficacy and a comparison of healing potential to Integra™

Development of scaffold from biopolymers can ease the requirements for donor skin autograft and plays an effective role in the treatment of burn wounds. In the current study, a porous foam based, bilayered hydrogel scaffold was developed using gelatin, hyaluronic acid and chondroitin sulfate (G-HA-CS). The fabricated scaffold was characterized physicochemically for pre- and post-sterilization efficacy by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA).In-vitrostudies proved that the scaffold promoted cellular proliferation. The efficacy of G-HA-CS scaffold was compared with Integra™ at different time points (7, 14, 21 and 42 days), in a swine second degree burn wound model. Remarkable healing potential of the scaffold was evident from the wound contraction rate, reduction of IL-6, TNF-αand C3. The expression of healing markers TGF-β1 and collagen 1 revealed significant skin regeneration with regulated fibroblast activation towards the late phase of healing (p< 0.001 at day 21 and 42 vs. control). Expression of Vascular Endothelial Growth Factor A (VEGFA), vimentin and N-cadherin were found to favor angiogenesis and skin regeneration. Mechanistically, scaffold promoted wound healing by modulation of CD-45, cyclooxygenase-2 and MMP-2. Thus, the promising results with foam based scaffold, comparable to Integra™ in swine burn injury model offer an innovative lead for clinical translation for effective management of burn wound.

Characterization of chitosan film with cinnamon essential oil emulsion co-stabilized by ethyl-Nα-lauroyl-l-arginate hydrochloride and hydroxypropyl-β-cyclodextrin

To improve the antimicrobial properties of chitosan films, cinnamon essential oil (CEO) nanoemulsion (1% and 3% v/v CEO) stabilized by ethyl-N^α-lauroyl-l-arginate hydrochloride (LAE) alone or co-stabilized by LAE and hydroxypropyl-β-cyclodextrin (HPCD) were incorporated into chitosan matrix. The micromorphology, physical and antimicrobial properties of the composite films were compared. The dense structure of the CEO nanoemulsion co-stabilized by LAE and HPCD reduced the water vapor permeability and water content. The incorporation of the CEO nanoemulsion co-stabilized by LAE and HPCD, reduced the adverse effects of CEO on the mechanical properties and microstructure of the film, and even slightly increased the tensile strength. In addition, the antimicrobial properties of chitosan films were enhanced due to the encapsulation and emulsification effect of HPCD and LAE on CEO. This work indicated that the prepared chitosan based edible films had the potential to be used in the field of food packaging to improve food safety.

Dual antioxidant-photosensitizing hydrogel system: Cross-linking of chitosan with tannic acid for enhanced photodynamic efficacy

Herein, a new antioxidant-photosensitizing hydrogel based on chitosan has been developed to control photodynamic therapy (PDT) activity in cancer treatment. In PDT, photosensitizers generate reactive oxygen species (ROS) during photochemical reactions, leading oxidative damage to cancer cells. However, high ROS levels are lethal to non-target healthy cells and tissues such as endothelial cells and blood cells. To mediate these drawbacks, we improved PDT with a natural polyphenolic antioxidant, Tannic acid (TA), to control the ROS level and minimize side effects through singlet oxygen (¹O₂) scavenging. In this work, chitosan-based hydrogels were designed using tannic acid as an antioxidant cross-linker and loaded with water-soluble N, N'-di-(l-alanine)-3,4,9,10-perylene tetracarboxylic diimide (PDI-Ala) as a photosensitizer. Our results showed that the hydrogel formed a three-dimensional (3D) microstructure with good mechanical strength and significant singlet oxygen production and antioxidant activity. In addition, the behavior of human melanoma cell line A375 and dental pulp stem cells (as normal cells) was compared and studied during an in vitro photodynamic treatment. Normal cells had a higher viability than cancer cells, indicating that the PDT is more effective on cancer cells than on normal cells. The new hydrogels could be applied as an effective new drug to control PDT performance.

Chondro-inductive hyaluronic acid/chitosan coacervate-based scaffolds for cartilage tissue engineering

Injuries related to articular cartilage are among the most challenging musculoskeletal problems because of poor repair capacity of this tissue. The lack of efficient treatments for chondral defects has stimulated research on cartilage tissue engineering applications combining porous biocompatible scaffolds with stem cells in the presence of external stimuli. This work presents the role of rat bone marrow mesenchymal stem cell (BMSC) encapsulated-novel three-dimensional (3D) coacervate scaffolds prepared through complex coacervation between different chitosan salts (CHI) and sodium hyaluronate (HA). The 3D architecture of BMSC encapsulated scaffolds (HA/CHI) was shown by scanning electron microscopy (SEM) to have an interconnected structure to allow cell-cell and cell-matrix interactions. Chondrogenic induction of encapsulated BMSCs within HA/CHI coacervates demonstrated remarkable cellular viability in addition to the elevated expression levels of chondrogenic markers such as sex determining region Y-box 9 protein (SOX9), aggrecan (ACAN), cartilage oligomeric matrix protein (COMP) and collagen type II (COL2A1) by immunofluorescence staining, qPCR and ELISA test. Collectively, HA/CHI coacervates are promising candidates for future use of these scaffolds in cartilage tissue engineering applications.

Tough chitosan/poly(acrylamide-acrylic acid)/cellulose nanofibrils/ethylene glycol nanocomposite organohydrogel with tolerance to hot and cold environments

Simultaneously achieving good mechanical properties and high tolerance to hot and cold environments in hydrogel materials remains a challenge. In this work, ethylene glycol (EG) and cellulose nanofibrils (CNFs) were introduced into chitosan/poly(acrylamide-acrylic acid) double-network hydrogels to improve their toughness and tolerance to hot and cold environments. The effect of EG and CNFs on the properties of the hydrogels was studied respectively. EG increases the tolerance of the hydrogel to hot and cold environments. However, EG had a negative effect on the mechanical properties of hydrogels. In addition, CNFs substantially enhanced the strength and toughness of the chitosan/poly(acrylamide-acrylic acid)/EG organohydrogels. Finally, with the cooperative action of EG and CNFs, high-strength and tough organohydrogels (tensile strength = 0.71 MPa, elongation at break = 787.2%) with a high tolerance to hot and cold environments (-23 °C to 60 °C) were obtained. Further, EG enabled the organohydrogel to revert to its original state after drying at 60 °C. This paper provides a new route to prepare high-strength and tough organohydrogels with a high tolerance to hot and cold environments.

Comparative Analyses of Inflammatory Response and Tissue Integration of 14 Hyaluronic Acid-Based Fillers in Mini Pigs

Purpose

Hyaluronic acid (HA)-based dermal fillers have been approved for various clinical indications, both cosmetic and medical. Previous studies that have assessed the performance of HA dermal fillers have primarily focused on evaluating filler durability, and only a few have studied their distribution within the tissues. The present study aimed to compare tissue integration of various types of HA dermal fillers having different clinical indications and varying injection depths.

Methods

To examine the local inflammatory response and distribution pattern of 14 HA dermal fillers (six Neuramis [NEU], one Belotero [BEL], three Juvéderm [JUV], and four Restylane [RES]), each product was injected intradermally and subcutaneously at the backs of two male miniature pigs. Histopathological evaluation and visual examination of the tissue sections were conducted 1 and 4 weeks after injection.

Results

Mean inflammatory cell infiltration scores tended to be lower in response to fillers from the NEU and BEL series than to those from the JUV and RES series after intradermal and subcutaneous injection. Furthermore, the inflammatory response to fillers with higher physicochemical properties specifically designed for injection into deeper layers of the skin tended to be slightly higher than those designated for injection into more superficial layers. There was no significant difference in tissue integration according to clinical indication and injection depth, although fillers from the NEU and BEL series exhibited better tissue integration than those from the JUV and RES series.

Conclusion

Our findings not only suggest that the local inflammatory response and tissue integration differ across HA dermal filler products, but also that these parameters could vary according to the recommended clinical indication and injection depth of the products.

Hyaluronan as a Prominent Biomolecule with Numerous Applications in Medicine

Hyaluronan (HA) is a natural glycosaminoglycan present in many tissues of all vertebrates. HA has various biological functions, which are dependent on its molar mass. High-molar-mass HA has anti-angiogenic, immunosuppressive and anti-inflammatory properties, while low-molar-mass HA has opposite effects. HA has also antioxidative properties, however on the other hand it can be readily degraded by reactive oxygen species. For many years it has been used in treatment of osteoarthritis, cosmetics and in ophthalmology. In the last years there has been a growing interest of HA to also be applied in other fields of medicine such as skin wound healing, tissue engineering, dentistry and gene delivery. In this review we summarize information on modes of HA administration, properties and effects of HA in various fields of medicine including recent progress in the investigation of HA.

Chitosan-anthracene hydrogels as controlled stiffening networks

In this study, we report the synthesis of single and dual-crosslinked anthracene-functional chitosan-based hydrogels in the absence of toxic initiators. Single crosslinking was achieved through dimerization of anthracene, whereas dual-crosslinked hydrogel was formed through dimerization of anthracene and free radical photopolymerization of methacrylated-chitosan in the presence of non-toxic initiator riboflavin, a well-known vitamin B2. Both single and dual-crosslinked hydrogels were found to be elastic, as was determined through rheological analysis. We observed that the dual-crosslinked hydrogels exhibited higher Young's modulus than the single-crosslinked hydrogels, where the modulus for single and dual-crosslinked hydrogels were measured as 9.2 ± 1.0 kPa and 26 ± 2.8 kPa, respectively resulting in significantly high volume of cells in dual-crosslinked hydrogel (2.2 × 10⁷ μm³) compared to single-crosslinked (4.9 × 10⁶ μm³). Furthermore, we investigated the cytotoxicity of both hydrogels towards 3T3-J2 fibroblast cells through CellTiter-Glo assay. Finally, immunofluorescence staining was carried out to evaluate the impact of hydrogel modulus on cell morphology. This study comprehensively presents functionalization of chitosan with anthracene, uses nontoxic initiator riboflavin, modulates the degree of crosslinking through dimerization of anthracene and free radical photopolymerization, and further modulates cell behavior through the alterations of hydrogel properties.

Chitosan/PDLLA-PEG-PDLLA solution preparation by simple stirring and formation into a hydrogel at body temperature for whole wound healing

Various chitosan (CS)-based dressings are used for wound treatment in clinical settings. Dressings that can be easily prepared and conveniently applied to treat wounds are highly desirable. In this study, a hybrid hydrogel was prepared using CS and poly (D,l-lactide)-poly (ethylene glycol)-poly (D,l-lactide) (PPP) through a simple process for convenient application. The optimal formula included a 7% CS PPP micellar solution, exhibiting excellent liquidity and allowing optional application as a spray. Molecular dynamic simulations indicated that CS and PPP established interactions via H-bonds and formed a long-chain complex, easily forming a hydrogel. Upon application, it rapidly transformed into a hydrogel and tightly adhered to the skin, forming a hemostatic (decreased 53.4%) and antibacterial (increased to about 90%) barrier, demonstrating accelerated wound healing (58.0%). This simple CS hybrid hydrogel can be easily prepared and applied and has potential applicability in clinical wound treatment.

Moxifloxacin loaded nanoparticles of disulfide bridged thiolated chitosan-eudragit RS100 for controlled drug delivery

The aim of our study was to prepare nanoparticles of disulfide bridged thiolated chitosan and eudragit RS100 using the air oxidation method for controlled drug delivery. The developed nanoparticles were characterized by FTIR, DSC, TGA, zeta sizer, zeta potential, SEM and ¹H NMR. The loading, entrapment efficiency and in-vitro release of moxifloxacin from nanoparticles was determined. Toxicity was studied using Caco-2 cell line and pharmacokinetics of moxifloxacin from the developed nanoparticles was studied in albino rats. The FTIR analysis showed no chemical interaction of the drug with the thiolated polymers. The DSC and TGA showed the thermal stability of nanoparticles. The average particle size of nanoparticles was 87 nm, zeta potential of NTC3 was ± 19 and SEM showed the spherical shape of nanoparticles. The ¹H NMR spectra confirmed the structure of thiolated chitosan and eudragit RS100. The loading, encapsulation efficiency and release of moxifloxacin from NTC3 were 100.3%, 89.67% and 88.49% respectively. The nanoparticles in culture medium did not affect the viability of Caco-2 cells. The NTC3 formulation showed a greater bioavailability of moxifloxacin compared to the reference formulation. The study reports a convenient and effective way to prepare a chitosan and eudragit RS100 based drug delivery system with a controlled release pattern.

Thermo-responsive chitosan/silk fibroin/amino-functionalized mesoporous silica hydrogels with strong and elastic characteristics for bone tissue engineering

Amino-functionalized mesoporous silica nanoparticles with radially porous architecture were optimally synthesized, and they were used together with silk fibroin and chitosan to produce a type of covalently crosslinked composite hydrogel using genipin as a crosslinker. The optimally achieved composite gels were found to be thermo-responsive at physiological temperature and pH with well-defined injectability. They were also detected to have mechanically strong and elastic characteristics. In addition, these gels showed the ability to release bioactive Si ions suited to an effective dose range in approximately linear manners for a few weeks. Studies on the cell-gel constructs revealed that the composite gels well supported the growth of seeded MC3T3-E1 cells, and the deposition of matrix components. Results obtained from the detection of alkaline phosphatase activity and the matrix mineralization in the cell-gel constructs confirmed that these composite gels had certain osteogenic capacity. The obtained results suggest that these composite gels have promising potential in bone repair and regeneration.

Electrospun chitosan oligosaccharide/polycaprolactone nanofibers loaded with wound-healing compounds of Rutin and Quercetin as antibacterial dressings

Burn injury has posed devastating burdens on the public health due to its inevitable damage to the skin structure resulting in the increased risk of infection. Therefore, it is highly demanding to develop efficacious antibacterial wound-healing dressing. Despite the favourable wound-healing activities, the curative efficacy of phytochemical compounds of quercetin (Qe) and its derivatives is limited by their poor water solubility. Here, we have fabricated a novel electrospun nanofiber membrane (ENM) consisting of polycaprolactone (PCL), chitosan oligosaccharides (COS), and Qe/Rutin (Ru) as the potential bioactive dressing for wound healing. The incorporation of chitosan oligosaccharides (COSs) in the PCL scaffold at the optimized molar ratio not only contributed to the improved hydrophilicity and water absorption performance of the ENM but effectively increased the specific surface area of the formed nanofibers. In particular, the antioxidant and antibacterial activities of the Qe/rutin-loaded nanofiber membranes were tested, which revealed that the PCL-COS-Qe membrane exhibited superior performance among all nanofiber membranes. Therefore, the developed PCL-COS-Qe/Ru nanofiber membranes hold enormous potential as healthcare products, such as wound dressings for burn injuries.

Self-Associating Polymers Chitosan and Hyaluronan for Constructing Composite Membranes as Skin-Wound Dressings Carrying Therapeutics

Chitosan, industrially acquired by the alkaline N-deacetylation of chitin, belongs to β-N-acetyl-glucosamine polymers. Another β-polymer is hyaluronan. Chitosan, a biodegradable, non-toxic, bacteriostatic, and fungistatic biopolymer, has numerous applications in medicine. Hyaluronan, one of the major structural components of the extracellular matrix in vertebrate tissues, is broadly exploited in medicine as well. This review summarizes that these two biopolymers have a mutual impact on skin wound healing as skin wound dressings and carriers of remedies.

All-polysaccharide hydrogels for drug delivery applications: Tunable chitosan beads surfaces via physical or chemical interactions, using oxidized pullulan

The present work reports a versatile approach to the manufacture of chitosan beads with tunable pore size and targeted properties. To achieve this, the as prepared chitosan beads were allowed to interact with aqueous solutions of two types of oxidized pullulan derivatives. Depending on the functional groups present on the pullulan structure after oxidation, i.e., carboxyl or aldehyde, covalent or physical hybrid hydrogels could be prepared. The attachment of oxidized pullulan onto chitosan structure was checked by FTIR, RMN, XPS and thermal analysis. The morphology of the hybrid structures was evaluated by using Scanning Electron Microscopy (SEM). After structural evaluations, all the prepared hydrogels were characterized by means of dynamic vapor sorption and swelling degree studies, exhibiting a Case-II swelling mechanism. Drug model compounds, such as ibuprofen, bacitracin and neomycin were used for drug loading and release assays, proving high drug loading capacity and tunable release behavior. Drug loaded beads exhibited antibacterial activity and hemocompatibility experiments indicated no coagulation phenomena.

Microfluidic synthesis of chitosan-coated magnetic alginate microparticles for controlled and sustained drug delivery

The present work aimed to assemble a simple, portable and economical L-junction microfluidic device to realize the adjustment and tunability of homogeneous round-shaped particles synthesis. In this study, we synthesize two kind of microparticles, including magnetic alginate microparticles (MAM) and chitosan-coated magnetic alginate (CMAM) used for controlling the drug release under a mild condition. Comparing to the traditional method, the MAM synthesized via this microfluidic approach has uniform size distribution, adjustable diameter as well as tunable magnetism. By exploring the amoxicillin as model drug, the MAM displays excellent pH-sensitive release, the effect of particle size on the drug release rate was investigated as well. The results show the smaller particles (220 μm) show a faster release rate than the bigger materials (1000 μm) due to their larger specific area, providing more frequency to interact with the reaction solution. The positive polyelectrolyte, chitosan, coated on the magnetic alginate surface endows CMAM time extension in drug release by two times, successfully achieving drug controlled and sustained release via the kinetics analysis. In summary, this microfluidic approach provides a convenient and efficient fluidic design for the well-controlled synthesis of micro-and nanoscale particles, which is a potential choice used for controlled and sustained drug release.

Chitosan derivatives-based films as pH-sensitive drug delivery systems with enhanced antioxidant and antibacterial properties

The purpose of this study was to develop and characterize chitosan (Ch)-based films incorporated with varying molecular weight (Mw) and acetylation degree (AD) chitosan-depolymerization-products (CDP), to be applied as drug delivery materials. As compared to Ch-film, optical and antioxidant potentials of Ch/CDP-based films were improved, particularly using low Mw and AD-CDP. Whereas, films water resistance, mechanical and antibacterial properties increased as CDP-Mw increased and AD decreased. For the thermal and swelling behaviors, better values were obtained using higher Mw and AD-CDP. Further, to assess their in vitro ciprofloxacin (CFX)-release behavior, loaded-CFX Ch/CDP-based films, crosslinked using glutaraldehyde, were prepared. Expect of elongation at break, crosslinked CFX-loaded films showed increased optical, water resistance, tensile strength and thermal properties, as compared to unloaded films. The CFX-release profiles indicated that a slower and sustained release was observed, particularly when using lower Mw and AD-CDP, and mainly for the crosslinked films during 48 h. These films can release CFX for up to 54% in 6 and 24 h, at pH 1.2 and 7.4, respectively. Through this study, novel biodegradable, swellable and pH-sensitive crosslinked Ch/CDP-based films may be considered as suitable and promising drug delivery systems.

Step-by-step design of poly (ε-caprolactone) /chitosan/Melilotus officinalis extract electrospun nanofibers for wound dressing applications

Composition of polymers and choosing the type of solvents in electrospinning systems is of great importance to achieve a mat with optimal properties. In this work, with emphasizing the influence of a novel solvent system, an electrospun wound dressing was designed in four steps. Firstly, to study the effect of polymer-solvent interactions and electrospinning distance, a constant amount of polycaprolactone (PCL) was dissolved at different compositions of formic acid (FA)/dichloromethane (DCM) and was electrospun at different distances. The composition of 80FA/20DCM and distance of 15 cm were selected as optimal conditions by lowest average diameter of fibers and simultaneously good surface uniformity. In the second step, the concentration of PCL was considered variable to achieve the lowest diameter of fibers. Finally, in the third and fourth steps, different concentrations of chitosan (CN) and constant dosage of Melilotus officinalis (MO) extract were added to the solution. The extract contained fibers had a mean diameter of 275 ± 41 nm which is in the required condition for wound caring. Eventually, the optimized PCL/CN and PCL/CN/MO specimens were evaluated by FTIR, DSC, Tensile, water contact angle, antibacterial assays, cell viability, and drug release analysis for determining their function and properties.

Manufacturing micro/nano chitosan/chondroitin sulfate curcumin-loaded hydrogel in ionic liquid: A new biomaterial effective against cancer cells

Chitosan/chondroitin sulfate (CHT/CS) curcumin-charged hydrogels were prepared through polyelectrolytic complexation (PEC) following two methodologies (PEC-CUR and PEC-T-CUR) and were applied on apoptosis of HeLa, HT29 and PC3 cancer cells. PEC-T-CUR (ionic liquid (IL) mixed using ultraturrax homogenizer) results show to be far better than for PEC-CUR (IL mixed using magnetic stirring), with IC₅₀ being improved 5.13 times to HeLa cancer cells (from 1675.2 to 326.7 μg mL^-1). PECs produced by this methodology presented favorable characteristics, such as particle size, hydrophobicity, pH swelling. Beyond this, the IL was quantitatively recovered in both cases. CUR entrapment levels were hugely loaded into PEC at around 100%. Swelling, dissolution/degradation, and pH_pzc assays showed that PECs may positively act in several environments, releasing the CUR, the CHT and CS as well. Characterization through FTIR, SEM, TEM, TGA, DSC, and WAXS confirmed CUR presence in both types of PECs, and cytotoxic studies showed the significant anticancer effects of CUR-containing PECs.

Versatile Use of Chitosan and Hyaluronan in Medicine

Chitosan is industrially acquired by the alkaline N-deacetylation of chitin. Chitin belongs to the β-N-acetyl-glucosamine polymers, providing structure, contrary to α-polymers, which provide food and energy. Another β-polymer providing structure is hyaluronan. A lot of studies have been performed on chitosan to explore its industrial use. Since chitosan is biodegradable, non-toxic, bacteriostatic, and fungistatic, it has numerous applications in medicine. Hyaluronan, one of the major structural components of the extracellular matrix in vertebrate tissues, is broadly exploited in medicine as well. This review summarizes the main areas where these two biopolymers have an impact. The reviewed areas mostly cover most medical applications, along with non-medical applications, such as cosmetics.

One-pot fabrication of lignin-based aromatic porous polymers for efficient removal of bisphenol AF from water

To remove the bisphenol AF (BPAF) from aqueous solution, two different types of lignin-based aromatic porous polymers (LAPP-1 and LAPP-2) were fabricated via one-pot crosslinking of lignin with 1,4-dichloroxylene and 4,4'-bis(chloromethyl)-1,1'-biphenyl, respectively. The successful synthesis of LAPPs was confirmed by FTIR and XPS, SEM, TEM and N₂ adsorption-desorption analysis. Then, batch adsorption experiments were conducted to investigate adsorption properties toward BPAF. Based on the results, the adsorption processes were in accordance with the pseudo-second-order kinetic model and the Freundlich isotherm model, and the thermodynamic studies showed that the adsorption was a spontaneous and exothermic process. It is remarkable that LAPPs exhibited good adsorption performance in wide ranges of pH and ionic strength as well as in recycling process. Notably, compared to LAPP-1, LAPP-2 exhibited higher adsorption capacity for BPAF, which can be ascribed to its higher porosity and content of aromatic ring. Moreover, the comprehensive analysis of experimental and theoretical results indicated that the π-π interactions and pore adsorption may jointly drive the uptake process of BPAF. Considering the simple fabrication method employed and excellent BPAF adsorption performance, LAPPs provided new insights into the development of advanced lignin-based adsorbents for removal of BPAF from water.

Hyaluronic acid electrospinning: Challenges, applications in wound dressings and new perspectives

Hyaluronic acid (HA) has already been consolidated in the literature as an extremely efficient biopolymer for biomedical applications. In addition to its biodegradability, HA also has excellent biological properties. In the nanofiber form, this polymer can mimic biological tissues, mainly the layers of the skin, and therefore has great potential as structures for the construction of wound dressings. Despite the numerous efforts from the scientific community proposing new dressings, this is an area in constant evolution. A dressing that brings together all the properties of an ideal dressing has not been developed yet. Electrospinning is a simple and versatile technique that correctly aligned with the functional properties of HA can produce multifunctional nanofiber structures capable of promoting skin recover quickly. This review discusses (i) key strategies for successful electrospinning of HA, (ii) main challenges and advances found in the electrospinning process, (iii) the bioactive properties of this polymer in the treatment of wounds, as well as (iv) the results obtained in the last decade by the in vitro and in vivo evaluation of the healing properties of these nanosystems.