Carbon Based Polymeric Nanocomposites for Dye Adsorption: Synthesis, Characterization, and Application

Harnessing the power of bacterial laccases for xenobiotic degradation in water: A 10-year overview

Industrialization and population growth are leading to the production of significant amounts of sewage containing hazardous xenobiotic compounds. These compounds pose a threat to human and animal health, as well as the overall ecosystem. To combat this issue, chemical, physical, and biological techniques have been used to remove these contaminants from water bodies affected by human activity. Biotechnological methods have proven effective in utilizing microorganisms and enzymes, particularly laccases, to address this problem. Laccases possess versatile enzymatic characteristics and have shown promise in degrading different xenobiotic compounds found in municipal, industrial, and medical wastewater. Both free enzymes and crude enzyme extracts have demonstrated success in the biotransformation of these compounds. Despite these advancements, the widespread use of laccases for bioremediation and wastewater treatment faces challenges due to the complex composition, high salt concentration, and extreme pH often present in contaminated media. These factors negatively impact protein stability, recovery, and recycling processes, hindering their large-scale application. These issues can be addressed by focusing on large-scale production, resolving operation problems, and utilizing cutting-edge genetic and protein engineering techniques. Additionally, finding novel sources of laccases, understanding their biochemical properties, enhancing their catalytic activity and thermostability, and improving their production processes are crucial steps towards overcoming these limitations. By doing so, enzyme-based biological degradation processes can be improved, resulting in more efficient removal of xenobiotics from water systems. This review summarizes the latest research on bacterial laccases over the past decade. It covers the advancements in identifying their structures, characterizing their biochemical properties, exploring their modes of action, and discovering their potential applications in the biotransformation and bioremediation of xenobiotic pollutants commonly present in water sources.

Functionalized gum acacia-activated carbon-CaO/NiO nanocomposite for potential photocatalytic removal of organic pollutants from water

A functionalized gum acacia-activated carbon-CaO/NiO nanocomposite was synthesized using an eco-friendly sol-gel method. The formed nanocomposite was designed to apply various light sources to enhance the improved removal of organic dyes such as methylene blue, methyl orange, methyl red, and rhodamine B from aqueous media. The band gap energies of CaO, NiO nanoparticles and gum acacia-activated carbon were 3.54, 4.28, and 5.34 eV, respectively, corresponding to a reflection edge of 350, 290, and 232 nm, respectively. The surface area of the synthesized nanocomposite was measured to be 17.892 m2 g-1. Sunlight and 20 mg L-1 of the nanocomposite quenched the dyes (methylene blue, 99.7%; methyl orange, 98.3%; methyl red, 96.7%; and rhodamine B, 93.5%) after 120, 100, 100, and 75 min of irradiation, respectively. However, after 80, 100, 100, and 75 min, the percentage of dyes under UV light irradiation was 98.6%, 95.8%, 98.4%, and 94.2% for methylene blue, methyl orange, methyl red, and rhodamine B, respectively. The nanocomposite showed excellent stability after five cycles of dye reduction.

Use of artificial intelligence for optimizing biosorption of textile wastewater using agricultural waste

Most of the dyes are toxic and non-biodegradable in textile industry wastewaters. Therefore, removal of textile dye using agriculture waste becomes crucial for the environment. This can be accomplished by the biosorption process which is the passive uptake of pollutants by agricultural waste. In this study, Response Surface Methodology (RSM), Artificial Neural Network (ANN) and Adaptive Neuro-Fuzzy Inference System (ANFIS) were used to obtain optimum conditions for Methylene Blue (MB) removal using sugarcane bagasse and peanut hulls as low-cost agricultural waste. The experimental design was carried out to study the effect of temperature, pH, biosorbent amount and dye concentration. The maximum MB dye removal considering the effect of total dissolved solids from aqueous solutions of 74.49% and 67.99% by sugarcane bagasse and peanut hulls, respectively. The models specify that they could predict biosorption with high accuracy having R²-value above 0.9. Statistical studies for RSM, ANFIS and ANN models were compared. Further, the models were optimized for maximum dye removal was at 1.21 g of biosorbent, pH 5.24, 31.24 mg/L MB concentration, 22.29°C of dye solution using sugarcane bagasse and at 1.37 g of biosorbent, pH 5.77, 36.7 mg/L MB concentration, 26.8°C of dye solution using peanut hulls. Additionally, Fourier Transform Infra-Red (FTIR) spectral analysis was also carried out to confirm the biosorption.

Adsorption Behavior of the L-Theanine onto Cation Exchange Resin ZGSPC106Na and D001SD

Adsorption is an important technology for the separation of different tea components. The adsorption behavior of L-theanine onto adsorbents was comprehensively studied in this paper. Among tested adsorbents, cation exchange resin ZGSPC106Na and D001SD were suitable for separating L-theanine, PVPP and PA-6 for catechins and macroporous resin HPD-400 for caffeine. Adsorption of L-theanine onto the cation resins was significantly influenced by the acidity, contact time and temperature. The adsorption behavior could be described by the pseudo-second-order rate equation and fitted to Langmuir and Freundlich models. ZGSPC106Na exhibited higher adsorption capacity, while D001SD showed higher adsorption selectivity. These might be attributed to the distinctive structure of the two resins and different ionization of the adsorbates. A method for simultaneous preparation of decaffeinated polyphenols, caffeine-enriched extract and decaffeinated L-theanine was established through successive separation on the columns fulfilled with PA-6, HPD-400 and D001SD, respectively.

Recent Advances in the Removal of Organic Dyes from Aqueous Media with Conducting Polymers, Polyaniline and Polypyrrole, and Their Composites

Water pollution by organic dyes, and its remediation, is an important environmental issue associated with ever-increasing scientific interest. Conducting polymers have recently come to the forefront as advanced agents for removing dye. The present review reports on the progress represented by the literature published in 2020-2022 on the application of conducting polymers and their composites in the removal of dyes from aqueous media. Two composites, incorporating the most important polymers, polyaniline, and polypyrrole, have been used as efficient dye adsorbents or photocatalysts of dye decomposition. The recent application trends are outlined, and future uses also exploiting the electrical and electrochemical properties of conducting polymers are offered.

Experimental Insights into Mesoporous Polyaniline-Based Nanocomposites for Anionic and Cationic Dye Removal

This work presents the preparation of inorganic-organic hybrid nanocomposites, namely three-dimensional polyaniline (Pani)/activated silica gel (ASG) (3D Pani@ASG), their characterization, and in removing application as a potential adsorbent for cationic brilliant green (BG), crystal violet (CV), and anionic Congo red (CR), and methyl orange (MO) dyes. Pani@ASG nanocomposites have been prepared by the in situ polymerization method and characterized using various techniques such as Fourier transform infrared (FTIR), X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) with selected area electron diffraction, thermogravimetric analysis with derivative thermogravimetry, zeta potential analyses, and Brunauer-Emmett-Teller (BET). The scanning electron microscopy (SEM) study confirms the average particle size of the Pani@ASG nanocomposite is in the range of 5 nm. FESEM, TEM, FTIR, and XRD analysis proved the successful decoration of ASG over Pani. The BET result of Pani@ASG shows a mesoporous nature with a pore diameter of less than 3 nm and a surface area of 423.90 m² g^-1. Both SEM and TEM analyses show the proportional distribution of ASG over Pani's surface. The adsorption trend of BG and MO on the studied materials at pH 7 was found as follows: Pani@ASG > Pani > ASG. The highest sorption capacities of MO and BG on Pani@ASG were 161.29 and 136.98 mg/g (T = 298.15 K, and Pani@ASG dose: 0.04 g for MO and 0.06 g for BG), which were greater compared with bare Pani and bare ASG, respectively. The interaction mechanism behind the adsorption of BG and MO dyes onto the Pani@ASG nanocomposite includes electrostatic interaction, π-π interaction, and hydrogen bonding. The mechanistic pathway and the interactions between the targeted dyes and Pani@ASG were further studied using adsorption isotherm, adsorption kinetics, and thermodynamics.

Highly efficient, bioactive, and bifunctional sorbent p-n-p visible light heterogeneous photocatalyst utilizing ultra-fine ZnS nanoparticles embedded in a polymeric nanocomposite

This study reports the successful synthesis of a ZnS@GO@Pani polymeric nanocomposite (NC) via chemical polymerization. The product was used for simultaneous photocatalytic degradation-adsorption of malachite green (MG), a carcinogenic and widely used dye. The physicochemical properties of the prepared NC were characterized by various techniques. Morphological and XRD results confirmed the fine size of ZnS nanoparticles (NPs) with an approximate mean size of 5 nm, uniformly distributed within the polymeric matrix. For comparative purposes, photocatalytic dye degradation-adsorption of this nanohybrid was explored both in the dark and under natural light. It was observed that 0.1 g of the ternary NC in MG aqueous solution (20 ppm) leads to dye adsorption within 15 minutes with an efficiency of 70% under dark conditions. Also, MG removal efficiency of up to 90% was achieved in 15 minutes under natural light owing to integrated photocatalytic degradation-adsorption mechanisms. Adsorption isotherm studies were performed considering Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R) models. The results showed that the Freundlich isotherm with R 2 = 0.988 is well consistent with the experimental data. Integrated photocatalytic degradation-adsorption kinetics were modeled with pseudo-first-order (PFO) and pseudo-second-order (PSO) models where PSO with R 2 = 0.999 best fitted the data, implying the predominant role of chemical adsorption in the dye removal process. Antibacterial tests revealed superior antibacterial activity of the prepared ZnS@GO@Pani NC against both Gram-negative and Gram-positive bacteria, demonstrating the remarkable synergistic effect of ZnS NPs embedded in the GO@Pani matrix. Accordingly, the prepared NC could be regarded as a promising candidate for wastewater treatment applications. The leaching and regeneration studies also confirmed that the prepared NC is a non-toxic dye removal agent with good reusability.

Removal of Organic Dyes from Aqueous Solutions by Activated Carbons Prepared from Residue of Supercritical Extraction of Marigold

In the present work, we reported on the efficiency of the removal of organic dyes by adsorption on activated carbons prepared from the residue of supercritical extraction of marigold. The performance of adsorbents prepared was tested towards methyl red, methylene blue, malachite green, and crystal violet at room temperature. The effects of carbonization (500 and 700 °C) and activation (700 and 800 °C) temperatures, textural parameters, and acid-base character of the adsorbent surface on the sorption properties of the activated carbons were established. Activated carbons are characterized by low developed specific surface area, from 2 to 206 m²/g, and have a basic character of the surface (pH of carbons water extracts ranging from 10.4 to 11.2). Equilibrium adsorption isotherms were investigated. The equilibrium data were analyzed in the Langmuir, Freundlich, and Temkin models. The adsorption capacities of activated carbons studied varied from 47.62 to 102.43 mg/g towards methyl red, 53.14 to 139.72 mg/g towards methyl red, 425.46 to 622.80 towards malachite green and 155.91 to 293.75 mg/g towards crystal violet, from their water solutions. Kinetics of the adsorption of the organic dyes studied were found to be described by the pseudo-second-order model. It was proven that through the physical activation of the residue of supercritical extraction of marigold, it is possible to obtain carbonaceous materials of very high adsorption capacity towards organic pollutants.

Biosorption of Cr(VI) Using Cellulose Nanocrystals Isolated from the Waterless Pulping of Waste Cotton Cloths with Supercritical CO2: Isothermal, Kinetics, and Thermodynamics Studies

In the present study, supercritical carbon dioxide (scCO2) was utilized as a waterless pulping for the isolation of cellulose nanocrystals (CNCs) from waste cotton cloths (WCCs). The isolation of CNCs from the scCO2-treated WCCs' fiber was carried out using sulphuric acid hydrolysis. The morphological and physicochemical properties analyses showed that the CNCs isolated from the WCCs had a rod-like structure, porous surface, were crystalline, and had a length of 100.03 ± 1.15 nm and a width of 7.92 ± 0.53 nm. Moreover, CNCs isolated from WCCs had a large specific surface area and a negative surface area with uniform nano-size particles. The CNCs isolated from WCCs were utilized as an adsorbent for the hexavalent chromium [Cr(VI)] removal from aqueous solution with varying parameters, such as treatment time, adsorbent doses, pH, and temperature. It was found that the CNCs isolated from the WCCs were a bio-sorbent for the Cr(VI) removal. The maximum Cr(VI) removal was determined to be 96.97% at pH 2, 1.5 g/L of adsorbent doses, the temperature of 60 °C, and the treatment time of 30 min. The adsorption behavior of CNCs for Cr(VI) removal was determined using isothermal, kinetics, and thermodynamics properties analyses. The findings of the present study revealed that CNCs isolated from the WCCs could be utilized as a bio-sorbent for Cr(VI) removal.

A novel porous hollow carboxyl-polysulfone microsphere for selective removal of cationic dyes

Herein, we obtained porous hollow carboxyl-polysulfone (PH-CPSF) microspheres through non-solvent-induced phase separation (NIPS) method and simple modification, used as highly efficient adsorbents for removing cationic dyes from sewage. The resulting PH-CPSF microspheres possess a hollow core and sponge-like shell structure, with high surface area, durable chemical inertness and structural stability. The as-synthesized PH-CPSF microspheres deliver a desirable adsorption effect after deprotonation treatment, with an adsorption capacity reaching up to 154.5 mg g^-1 at 25 °C (pH = 7) of methylene blue (MB). The inter-molecular interactions between MB and the surface of the PH-CPSF, including π-π interaction, hydrogen bonding, strong charge attraction and weak charge attraction endow the adsorption ability of the PH-CPSF. The pseudo-second-order kinetic model pronounces in the adsorption behavior, and the adsorption equilibrium data is fitted to the Langmuir model. Moreover, PH-CPSF microspheres can also be used as adsorption fillers for large-scale water purification, and a removal rate of 94.0% for MB can be achieved under a flow rate of 8000 L m^-3 h^-1. The reusability of 95.3% removal effect for PH-CPSF microspheres after 20 consecutive cycles can be attained by a simple regeneration treatment. The adsorption efficiency of the PH-CPSF microspheres was evaluated by variety of cationic and anionic dyes, with high adsorption capacity toward cationic dyes (100%) and less than 10% toward anionic dyes. These results manifest that PH-CPSF microspheres are a potential adsorbent with long-term purification capabilities, which are expected to be used in small and large-scale sewage treatment.

Polymeric Nanocomposites for Environmental and Industrial Applications

Polymeric nanocomposites (PNC) have an outstanding potential for various applications as the integrated structure of the PNCs exhibits properties that none of its component materials individually possess. Moreover, it is possible to fabricate PNCs into desired shapes and sizes, which would enable controlling their properties, such as their surface area, magnetic behavior, optical properties, and catalytic activity. The low cost and light weight of PNCs have further contributed to their potential in various environmental and industrial applications. Stimuli-responsive nanocomposites are a subgroup of PNCs having a minimum of one promising chemical and physical property that may be controlled by or follow a stimulus response. Such outstanding properties and behaviors have extended the scope of application of these nanocomposites. The present review discusses the various methods of preparation available for PNCs, including in situ synthesis, solution mixing, melt blending, and electrospinning. In addition, various environmental and industrial applications of PNCs, including those in the fields of water treatment, electromagnetic shielding in aerospace applications, sensor devices, and food packaging, are outlined.

Recent Advances in Functional Polymer Materials for Energy, Water, and Biomedical Applications: A Review

Academic research regarding polymeric materials has been of great interest. Likewise, polymer industries are considered as the most familiar petrochemical industries. Despite the valuable and continuous advancements in various polymeric material technologies over the last century, many varieties and advances related to the field of polymer science and engineering still promise a great potential for exciting new applications. Research, development, and industrial support have been the key factors behind the great progress in the field of polymer applications. This work provides insight into the recent energy applications of polymers, including energy storage and production. The study of polymeric materials in the field of enhanced oil recovery and water treatment technologies will be presented and evaluated. In addition, in this review, we wish to emphasize the great importance of various functional polymers as effective adsorbents of organic pollutants from industrial wastewater. Furthermore, recent advances in biomedical applications are reviewed and discussed.

Adsorptive Separation of Brilliant Green Dye from Water by Tartaric Acid-Treated Holarrhena antidysenterica and Citrullus colocynthis Biowaste

Holarrhena antidysenterica (Ha) and Citrullus colocynthis (Cc) biowaste from indigenous Pakistan resources was used to remove toxic brilliant green (BG) dye from aqueous solutions in a batch mode. Tartaric acid chemical modification gave promising results than the nonmodified forms of biowaste. Surface characterization was carried out by FT-IR and SEM. The optimum conditions for (BG) dye elimination by Ha-tartaric acid modified (Ha-Ta) were 1.8 g, 45 minutes, 4.0 pH; 40°C, and 100 rpm and with Cc-tartaric acid modified (Cc-Ta) were 1.6 g, 45 minutes, 6.0 pH; 40°C, and 150 rpm dye solution shaking rate, which gave optimum results. Equilibrium data of raw and chemically modified biowaste followed the Langmuir model indicating monolayer chemisorption. Qmax values were found to be 55.24 mg/g, 112.35 mg/g, 50.50 mg/g, and 79.36 mg/g for Ha, Ha-Ta, Cc, and Cc-Ta. Kinetics followed the pseudo-second-order kinetic model. Dye removal involved surface and intraparticle mode of diffusion. Thermodynamic studies proved the process to be spontaneous and exothermic one. The adsorbents can be effectively utilized for the removal of toxic basic dyes, such as BG from wastewaters.