Combinational antimicrobial activity of biogenic TiO2 NP/ZnO NPs nanoantibiotics and amoxicillin-clavulanic acid against MDR-pathogens

The development of effective strategies against multidrug-resistant (MDR) pathogens is an urgent need in modern medicine. Nanoantibiotics (nABs) offer a new hope in countering the surge of MDR-pathogens. The aim of the current study was to evaluate the antibacterial activity of two attractive nABs, TiO2 NPs and ZnO NPs, and their performance in improving the antimicrobial activity of defined antibiotics (amoxicillin-clavulanic acid, amox-clav) against MDR-pathogens. The nABs were synthesized using a green method. The physicochemical characteristics of the synthesized nanoparticles were determined using standard methods. The results showed the formation of pure anatase TiO2 NPs and hexagonal ZnO NPs with an average particle size of 38.65 nm and 57.87 nm, respectively. The values of zeta potential indicated the high stability of the samples. At 8 mg/mL, both nABs exhibited 100 % antioxidant activity, while ZnO showed significantly higher activity at lower concentrations. The antibiofilm assay showed that both nABs could inhibit the formation of biofilms of Acinetobacter baumannii 80 and Escherichia coli 27G (MDR-isolates). However, ZnO NPs showed superior antibiofilm activity (100 %) against E. coli 27G. The MIC values were determined to be 8 (1), 2 (2), and 4 (4) mg/mL for amox-clav, TiO2 NPs, and ZnO NPs against A. baumannii 80 (E. coli 27G), respectively. The results showed that both nABs had synergistically enhanced antibacterial performance in combination with amox-clav. Specifically, an 8-fold reduction in MIC values of antibiotics was observed when they were combined with nABs. These findings highlight the potential of TiO2 NPs and ZnO NPs as effective nanoantibiotics against MDR-pathogens. The synergistic effect observed when combining nABs with antibiotics suggests a promising approach for combating antibiotic resistance. Further research and development in this area could lead to the development of more effective treatment strategies against MDR infections.

Effect of copper oxide and zinc oxide nanoparticles on photosynthesis and physiology of Raphanus sativus L. under salinity stress

The study evaluates the impact of two metal oxide nanoparticles: copper oxide (CuO) and zinc oxide (ZnO) on the growth and physiology of Raphanus sativus L. (radish) under salinity stress. Fifteen days old seedlings of R. sativus were subjected to different concentrations of salt stress (0 mM, 150 mM, and 300 mM NaCl) alone and in interaction with 100 mgL-1 metal oxide nanoparticle treatments (CuO and ZnO NPs via foliar spray) for 15 days. The results confirmed the severe effects of salinity stress on the growth and physiology of radish plants by decreasing nutrient uptake, leaf area, and photosystems photochemistry and by increasing proline accumulation, anthocyanin, flavonoids content, and antioxidant enzyme activities which is directly linked to increased oxidative stress. The foliar application of CuO and ZnO NPs alleviated the adverse effects of salt stress on radish plants, as indicated by improving these attributes. Foliar spray of ZnO NPs was found efficient in improving the leaf area, photosynthetic electron transport rate, the PSII quantum yield, proton conductance and mineral content in radish plants under NaCl stress. Besides, ZnO NPs decreased the NaCl-induced oxidative stress by declining proline, anthocyanin, and flavonoids contents and enzymatic activities such as superoxide dismutase (SOD), ascorbate peroxidase (APX) and guaiacol peroxidase (GOPX). Thus, our study revealed that ZnO NPs are more effective and have beneficial effects over CuO NPs in promoting growth and reducing the adverse effects of NaCl stress in radish plants.

Charge Transfer Copper Chelating Complex and Biogenically Synthesized Copper Oxide Nanoparticles Using Salvia officinalis Laves Extract in Comparative Spectrofluorimetric Estimation of Anticancer Dabrafenib

Cancer is a broad category of disease that can affect virtually any organ or tissue in the body when abnormal cells grow uncontrollably, invade surrounding tissue, and/or spread to other organs. Dabrafenib is indicated for the treatment of adult patients with advanced non-small cell lung cancer. In the present study, two newly developed spectrofluorimetric probes for the detection of the anticancer drug Dabrafenib (DRF) in its authentic and pharmaceutical products using an ecologically synthesized copper oxide nanoparticle (CuONPs) from Salvia officinalis leaf extract and a copper chelate complex are presented. The first system is based on the influence of the particular optical properties of CuONPs on the enhancement of fluorescence detection. The second system, on the other hand, acts through the formation of a copper charge transfer complex. Various spectroscopic and microscopic studies were performed to confirm the environmentally synthesized CuONPs. The fluorescence detections in the two systems were measured at λex 350 and λem of 432 nm. The results showed the linear concentration ranges for the DRF-CuONPs-SDS and DRF-Cu-SDS complexes were determined to be 1.0-500 ng mL- 1 and 1.0-200 ng mL- 1, respectively. FI = 1.8088x + 21.418 (r = 0.9997) and FI = 2.7536x + 163.37 (r = 0.9989) were the regression equations. The lower detection and quantification limits for the aforementioned fluorescent systems were determined to be 0.4 and 0.8 ng mL- 1 and 1.0 ng mL- 1, respectively. The results also showed that intra-day DRF assays using DRF-CuONPs-SDS and DRF-Cu(NO3)2-SDS systems yielded 0.17% and 0.54%, respectively. However, the inter-day assay results for the above systems were 0.27% and 0.65%, respectively. The aforementioned two systems were effectively used in the study of DRF with excellent percent recoveries of 99.66 ± 0.42% and 99.42 ± 0.56%, respectively. Excipients such as magnesium stearate, titanium dioxide, red iron oxide, and silicon dioxide used in pharmaceutical formulations, as well as various common cations, amino acids, and sugars, had no effect on the detection of compound.

Exploring the potential of molecularly imprinted polymers and metal/metal oxide nanoparticles in sensors: recent advancements and prospects

Metal/metal oxide nanoparticles have gained increasing attention in recent years due to their outstanding features, including optical and catalytic properties, as well as their excellent conductivity. The implementation of metal/metal oxide nanoparticles, combined with molecularly imprinted polymers (MIPs) has paved the way for a new generation of building blocks to engineer and enhance the fascinating features of advanced sensors. This review critically evaluates the impact of combining metal/metal oxide nanoparticles with MIPs in sensors. It covers synthesis strategies, advantages of coupling these materials with MIPs, and addresses questions about the selectivity of these hybrid materials. In the end, the current challenges and future perspectives of this field are discussed, with a particular focus on the potential applications of these hybrid composites in the sensor field. This review highlights the exciting opportunities of using metal/metal oxide nanoparticles along with MIPs for the development of next-generation sensors.

Functionalized gum acacia-activated carbon-CaO/NiO nanocomposite for potential photocatalytic removal of organic pollutants from water

A functionalized gum acacia-activated carbon-CaO/NiO nanocomposite was synthesized using an eco-friendly sol-gel method. The formed nanocomposite was designed to apply various light sources to enhance the improved removal of organic dyes such as methylene blue, methyl orange, methyl red, and rhodamine B from aqueous media. The band gap energies of CaO, NiO nanoparticles and gum acacia-activated carbon were 3.54, 4.28, and 5.34 eV, respectively, corresponding to a reflection edge of 350, 290, and 232 nm, respectively. The surface area of the synthesized nanocomposite was measured to be 17.892 m2 g-1. Sunlight and 20 mg L-1 of the nanocomposite quenched the dyes (methylene blue, 99.7%; methyl orange, 98.3%; methyl red, 96.7%; and rhodamine B, 93.5%) after 120, 100, 100, and 75 min of irradiation, respectively. However, after 80, 100, 100, and 75 min, the percentage of dyes under UV light irradiation was 98.6%, 95.8%, 98.4%, and 94.2% for methylene blue, methyl orange, methyl red, and rhodamine B, respectively. The nanocomposite showed excellent stability after five cycles of dye reduction.

Comparative toxicity assessment of individual, binary and ternary mixtures of SiO2, Fe3O4, and ZnO nanoparticles in freshwater microalgae, Scenedesmus obliquus: Exploring the role of dissolved ions

Metal oxide nanoparticles (NPs) are considered among the most prevalent engineered nanomaterials. To have a deeper understanding of the mode of action of multiple metal oxide nanoparticles in mixtures, we have used a unicellular freshwater microalga Scenedesmus obliquus as a model organism. The toxicity of silicon dioxide (SiO2), iron oxide (Fe3O4), and zinc oxide (ZnO) NPs was studied individually as well as in their binary (SiO2 + Fe3O4, Fe3O4 + ZnO, and ZnO + SiO2) and ternary (SiO2 + Fe3O4 + ZnO) combinations. The effects of metal ions from ZnO and Fe3O4 were investigated as well. The results observed from the study, showed that a significant amount of toxicity was contributed by the dissolved ions in the mixtures of the nanoparticles. Decreases in the cell viability, ROS generation, lipid peroxidation, antioxidant enzyme activity, and photosynthetic efficiency were analyzed. Among all the individual particles, ZnO NPs showed the maximum effects and increased the toxicities of the binary mixtures. The binary and ternary mixtures of the NPs clearly showed increased toxic effects in comparison with the individual entities. However, the ternary combination had lesser toxic effects than the binary combination of Fe3O4 + ZnO. The decline in cell viability and photosynthetic efficiency were strongly correlated with various oxidative stress biomarkers emphasizing the crucial role of reactive oxygen species in inducing the toxic effects. The findings from this study highlight the importance of evaluating the combinatorial effects of various metal oxide NPs as part of a comprehensive ecotoxicity assessment in freshwater microalgae.

How could actinobacteria augment the growth and redox homeostasis in barley plants grown in TiO2NPs-contaminated soils? A growth and biochemical study

The increases in titanium dioxide nanoparticles (TiO2-NPs) released into the environment have raised concerns about their toxicity. However, their phytotoxic impact on plants is not well studied. Therefore, this study aimed at a deeper understanding of the TiO2-NPs phytotoxic impact on barley (Hordeum vulgare) growth and stress defense. We also hypothesized that soil inoculation with bioactive Rhodospirillum sp. JY3 strain can be applied as a biological fertilizer to alleviate TiO2-NPs phytotoxicity. At TiO2-NPs phytotoxicity level, photosynthesis was significantly retarded (∼50% reduction) in TiO2-NPs treated-barley plants which accordingly affect the biomass of barley plants. This retardation was accompanied by a remarkable induction of oxidative damage (H2O2, lipid peroxidation) with a concomitant reduction in the antioxidant defense metabolism. At a glance, Rhodospirillum sp. JY3 ameliorated the reduction in growth by enhancing the photosynthetic efficiency in contaminated barley plants. Moreover, Rhodospirillum sp. JY3 inoculation reduced the oxidative damage induced by TiO2-NPs via quenching H2O2 production and lipid peroxidation. Regarding the antioxidant defense arsenal, Rhodospirillum sp. JY3 enhanced both enzymatic (e.g. peroxidase (POX), catalase (CAT), superoxide dismutase (SOD), …. etc.) and non-enzymatic (glutathione (GSH), ascorbate (ASC), polyphenols, flavonoids, tocopherols) antioxidants in shoots and to a greater extent roots of barley plants. Moreover, the inoculation significantly enhanced the heavy metal-detoxifying metabolites (eg. phytochelatins, glutaredoxin, thioredoxin, peroxiredoxin) as well as metal-detoxifying enzymes in barley shoots and more apparently in roots of TiO2-NPs stressed plants. Furthermore, there was an organ-specific response to TiO2-NPs and Rhodospirillum sp. JY3. To this end, this study shed light, for the first time, on the molecular bases underlie TiO2-NPs stress mitigating impact of Rhodospirillum sp. JY3 and it introduced Rhodospirillum sp. JY3 as a promising eco-friendly tool in managing environmental risks to maintain agricultural sustainability.

Exploring the potential of metal and metal oxide nanomaterials for sustainable water and wastewater treatment: A review of their antimicrobial properties

Metallic nanoparticles (NPs) are of particular interest as antimicrobial agents in water and wastewater treatment due to their broad suppressive range against bacteria, viruses, and fungi commonly found in these environments. This review explores the potential of different types of metallic NPs, including zinc oxide, gold, copper oxide, and titanium oxide, for use as effective antimicrobial agents in water and wastewater treatment. This is due to the fact that metallic NPs possess a broad suppressive range against bacteria, viruses, as well as fungus. In addition to that, NPs are becoming an increasingly popular alternative to antibiotics for treating bacterial infections. Despite the fact that most research has been focused on silver NPs because of the antibacterial qualities that are known to be associated with them, curiosity about other metallic NPs as potential antimicrobial agents has been growing. Zinc oxide, gold, copper oxide, and titanium oxide NPs are included in this category since it has been demonstrated that these elements have antibacterial properties. Inducing oxidative stress, damage to the cellular membranes, and breakdowns throughout the protein and DNA chains are some of the ways that metallic NPs can have an influence on microbial cells. The purpose of this review was to engage in an in-depth conversation about the current state of the art regarding the utilization of the most important categories of metallic NPs that are used as antimicrobial agents. Several approaches for the synthesis of metal-based NPs were reviewed, including physical and chemical methods as well as "green synthesis" approaches, which are synthesis procedures that do not involve the employment of any chemical agents. Moreover, additional pharmacokinetics, physicochemical properties, and the toxicological hazard associated with the application of silver NPs as antimicrobial agents were discussed.

Influence of ozone microbubble enhanced oxidation on mine effluent mixes and Daphnia magna toxicity

The mining industry often must mix different kinds of water on the mine site during pre-treatment or post-treatment before the final discharge of the treated water to the environment. Microbubble ozonation has proven to be efficient in the removal of contaminants of concern from mine water, such as metals, metalloids, and nitrogen compounds, which can persist in the environment and entail toxicity issues. This study evaluated the efficiency of ozone microbubbles combined with lime precipitation on contaminant removal and its impact on toxicity for Daphnia magna with five different mine effluent mixes from an active mine site located in Abitibi-Témiscamingue, QC, Canada. For the non-acidic mixes, two scenarios were tested: first, pre-treatment of metals using lime precipitation and a flocculant was conducted prior to ozonation; and second, ozonation was conducted prior to metals post-treatment using the same precipitation and flocculation technique. Results showed that the NH₃-N removal efficiency ranged from 90% for the lower initial concentrations (1.1 mg/L) to more than 99% for the higher initial concentrations (58.4 mg/L). Moreover, ozonation without metals pre-treatment improved NH₃-N treatment efficiency in terms of kinetics but entailed abnormal toxicity issues. Results of bioassays conducted on water with metals pre-treatment did not show any toxicity events but showed abnormal toxicity patterns on the mixes treated without metals pre-treatment (diluted effluents were toxic, while undiluted were not). At 50% dilution, the water was toxic, probably due to the potential presence of metal oxide nanoparticles. The confirmation of the source of toxicity requires further investigation.

Metal oxide nanoparticles inhibit nitrogen fixation and rhizosphere colonization by inducing ROS in associative nitrogen-fixing bacteria Pseudomonas stutzeri A1501

The potential effects of engineered metal oxide nanoparticles (MONPs) on bacterial nitrogen fixation are of great concern. Herein, the impact and mechanism of the increasing-used MONPs, including TiO₂, Al₂O₃, and ZnO nanoparticles (TiO₂NP, Al₂O₃NP, and ZnONP, respectively), on nitrogenase activity was studied at the concentrations ranging from 0 to 10 mg L^-1 using associative rhizosphere nitrogen-fixing bacteria Pseudomonas stutzeri A1501. Nitrogen fixation capacity was inhibited by MONPs in an increasing degree of TiO₂NP < Al₂O₃NP < ZnONP. Realtime qPCR analysis showed that the expressions of nitrogenase synthesis-related genes, including nifA and nifH, were inhibited significantly when MONPs were added. MONPs could cause the explosion of intracellular ROS, and ROS not only changed the permeability of the membrane but also inhibited the expression of nifA and biofilm formation on the root surface. The repressed nifA gene could inhibit transcriptional activation of nif-specific genes, and ROS reduced the biofilm formation on the root surface which had a negative effect on resisting environmental stress. This study demonstrated that MONPs, including TiO₂NP, Al₂O₃NP, and ZnONP, inhibited bacterial biofilm formation and nitrogen fixation in the rice rhizosphere, which might have a negative effect on the nitrogen cycle in bacteria-rice system.

Physical properties and pharmacological applications of Co3O4, CuO, NiO and ZnO nanoparticles

Nano materials have found developing interest in biogenic approaches in the present times. In this study, metal oxide nanoparticles (NPs) such as cobalt oxide (Co₃O₄), copper oxide (CuO), nickel oxide (NiO) and zinc oxide (ZnO), were synthesized using a convenient and rapid method. The structural features of synthesized metal oxide NPs were studied using various microscopic and spectroscopic techniques like SEM, TEM, XRD, FTIR and EDX. The characterization results confirmed that the prepared NPs possess highly pure, unique and crystalline geometry with size ranging between 10 and 20 nm. The synthesized nanoparticles were successfully employed for pharmacological applications. Enzyme inhibition potential of NPs was evaluated against the urease and tyrosinase enzymes. The percent inhibition for the urease enzyme was observed as 80 to 90% by using Co₃O₄, CuO, NiO and ZnO NPs while ZnO NPs were found to have best anti-urease and anti-tyrosinase activities. Moreover, effective inhibition was observed in the case of ZnO NPs at IC₅₀ values of 0.0833 and 0.1732 for urease and tyrosinase enzymes which were comparable to reference drugs thiourea and kojic acid. The lower the IC₅₀ value, higher the free radical scavenging power. Antioxidant activity by DPPH free radical scavenging method was found moderately high for the synthesized metal oxide NPs while best results were obtained for Co₃O₄ and ZnO NPs as compared to the standard ascorbic acid. Antimicrobial potential was also evaluated via the disc diffusion and well diffusion methods. CuO NPs show a better zone of inhibition at 20 and 27 mm by using both methods. This study proves that the novel metal oxide NPs can compete with the standard materials used in the pharmacological studies nowadays.

Modeling study for predicting altered cellular activity induced by nanomaterials based on Dlk1-Dio3 gene expression and structural relationships

Nanomaterials have been widely applied and developed due to its unique physicochemical characteristics, such as their small size. The environmental and biological effects caused by nanomaterials have raised concerns. In particular, some nanometal oxides have obvious biological toxicity and pose a major safety problem. The prediction model established by combining the expression levels of key genes with quantitative structure-activity relationship (QSAR) studies can predict the biotoxicity of nanomaterials by relying on both structural information and gene regulation information. This model can fill the gap of missing mechanisms in QSAR studies. In this study, we exposed A549 cells and BEAS-2B cells to 21 nanometal oxides for 24 h. Cell viability was assessed by measuring absorbance values using the CCK8 assay, and the expression levels of the Dlk1-Dio3 gene cluster were measured. By using the theoretical basis of the nano-QSAR model and the improved principles of the SMILES-based descriptors to combine specific gene expression and structural factors, new models were constructed using Monte Carlo partial least squares (MC-PLS) for the biotoxicity of the nanometal oxides on two different lung cells. The overall quality of the nano-QSAR models constructed by combining specific gene expression and structural parameters for A549 and BEAS-2B cells was better than that of the models constructed based on structural parameters only. The coefficient of determination (R²) of the A549 cell model increased from 0.9044 to 0.9969, and the Root Mean Square Error (RMSE) decreased from 0.1922 to 0.0348. The R² of the BEAS-2B cell model increased from 0.9355 to 0.9705, and the RMSE decreased from 0.1206 to 0.0874. The model validation proved the proposed models have a good prediction, generalization ability and model stability. This study offers a new research perspective for the toxicity assessment of nanometal oxides, contributing to a more systematic safety evaluation of nanomaterials.

Titanium biogenic nanoparticles to help the growth of Trichoderma harzianum to be used in biological control

BACKGROUND

The biogenic synthesis of metallic nanoparticles is a green alternative that reduces the toxicity of this nanomaterials and may enable a synergy between the metallic core and the biomolecules employed in the process enhancing biological activity. The aim of this study was to synthesize biogenic titanium nanoparticles using the filtrate of the fungus Trichoderma harzianum as a stabilizing agent, to obtain a potential biological activity against phytopathogens and mainly stimulate the growth of T. harzianum, enhancing its efficacy for biological control.

RESULTS

The synthesis was successful and reproductive structures remained in the suspension, showing faster and larger mycelial growth compared to commercial T. harzianum and filtrate. The nanoparticles with residual T. harzianum growth showed inhibitory potential against Sclerotinia sclerotiorum mycelial growth and the formation of new resistant structures. A great chitinolytic activity of the nanoparticles was observed in comparison with T. harzianum. In regard to toxicity evaluation, an absence of cytotoxicity and a protective effect of the nanoparticles was observed through MTT and Trypan blue assay. No genotoxicity was observed on V79-4 and 3T3 cell lines while HaCat showed higher sensitivity. Microorganisms of agricultural importance were not affected by the exposure to the nanoparticles, however a decrease in the number of nitrogen cycling bacteria was observed. In regard to phytotoxicity, the nanoparticles did not cause morphological and biochemical changes on soybean plants.

CONCLUSION

The production of biogenic nanoparticles was an essential factor in stimulating or maintaining structures that are important for biological control, showing that this may be an essential strategy to stimulate the growth of biocontrol organisms to promote more sustainable agriculture.

Soil polluted with nano ZnO reveals unstable bacterial communities and decoupling of taxonomic and functional diversities

Due to relentless production and disposal of nano zinc oxide (nZnO), it has become critical to comprehend the serious risks large-scale accumulation of nZnO pose to bacterial communities in soil. The primary objective was to evaluate the changes in bacterial community structure and associated functional pathways through predictive metagenomic profiling and subsequent validation through Quantitative Realtime PCR in soil spiked with nZnO (0, 50, 200, 500 and 1000 mg Zn kg^-1) and similar levels of bulk ZnO. The results revealed that soil microbial biomass-C, -N, -P, soil respiration and enzyme activities decreased markedly at higher ZnO levels. The alpha diversity decreased with increasing ZnO level, with more impact under nZnO, while beta diversity analyses indicated a distinct dose- dependent separation of bacterial communities. The dominant taxa including Proteobacteria, Bacterioidetes, Acidobacteria and Planctomycetes significantly increased in abundance, while Firmicutes, Actinobacteria and Chloroflexi decreased in abundance with elevated nZnO and bZnO levels. Redundancy analysis indicated that changes in bacterial community structure instilled a greater dose- rather than size- specific response on key microbial parameters. Predicted key functions did not show a dose- specific response, and at 1000 mg Zn kg^-1, methane metabolism as well as starch and sucrose metabolism was attenuated, while functions involving two component systems and bacterial secretion systems were enhanced under bZnO indicating better stress avoidance mechanism than under nZnO. Realtime PCR and microbial endpoint assays confirmed the metagenome derived taxonomic and functional data, respectively. Taxa and functions that varied substantially under stress were established as bioindicators to predict nZnO toxicity in soils. Taxon-function decoupling indicated that the soil bacterial communities deployed adaptive mechanisms under high ZnO, with lesser buffering capacity and resilience of communities under nZnO.

Metagenomics indicates abundance of biofilm related genes and horizontal transfer of multidrug resistant genes among bacterial communities in nano zinc oxide polluted soil

The unsafe and reckless disposal of metal oxide nanoparticles like ZnO (nZnO) into the soil could seriously impact bacterial behavioural responses and functions. Under such stress, biofilm formation is considered to be a robust mechanism for bacterial survival in soil. We examined the response of bacterial metagenomes in soils exposed to varying levels of Zn (50, 200, 500 and 1000 mg kg^-1) as nano Zn oxide (nZnO) in terms of biofilm genesis and regulation and their co-occurrences with multidrug resistance genes (MDRGs) and mobile genetic elements (MGEs). The size-specific effects of nZnO were verified using its bulk counterpart (bZnO). Both nZnO and bZnO facilitated profusion of biofilm related genes (BGs) especially at higher Zn levels (500 and 1000 mg kg^-1 Zn), though maximum abundance was registered at a comparatively lower level under nZnO. In general, nZnO favoured an enhancement of genes involved in exopolysaccharide biosynthesis and attachment, while bZnO favoured genes related to capsule formation, chemotaxis and biofilm dispersion. Co-occurrence network analysis revealed significant positive correlations between abundances of BGs, MDRGs and MGEs, indicating an enhanced probability for horizontal gene transfer of MDRGs in nZnO polluted soils.

Comparative bioaccumulation, translocation, and phytotoxicity of metal oxide nanoparticles and metal ions in soil-crop system

Exposure of the soil environment to metal nanoparticles (MNPs) has been extensive because of their indiscriminate use and the disposal of MNP products in various applications. In MNP-amended soil, various crops can absorb the nanoparticles, and accumulation of the MNPs in farm products has potential risks for bioconcentration in humans and livestock. Here, we evaluated the comparative bioaccumulation, translocation, and phytotoxicity of MNPs (ZnO and CuO NPs) and metal ions (Zn(NO3)2 and Cu(NO3)2) in four different crops, namely lettuce, radish, bok choy, and tomato. We carried out pot experiments to evaluate the phytotoxicity in the crops from the presence of MNPs and metal ions. Phytotoxicity from different treatments differed depending on the plant species, and metal types. In addition, exposure to Zn and Cu showed positive dose-dependent effects on their bioaccumulation in each crop. However, there were no significant differences in metal bioaccumulation depending on whether the crops were exposed to MNPs or metal ions. By calculating the bioconcentration factor (BCF) and translocation factor (TF), we were able to estimate the biological uptake and translocation abilities of MNPs and metal ions for each crop. It was found that lettuce and radish had greater BCFs than bok choy and tomato, while bok choy and tomato had higher TFs. Also, the uptake and translocation of Zn were better than those of Cu. However, the values for BCF and TF for each crop showed no significant differences between MNP and metal ion exposure. A micro X-ray fluorescence (μ-XRF) spectrometer analysis demonstrated that only Zn elements appeared in the primary veins and edges of all leaves and the storage root of radish. Our study aims to estimate bioaccumulation, translocation, and the implied potential risks from MNPs accumulated in different plant species.

Exploring specific biomarkers regarding neurobehavioral toxicity of lead dioxide nanoparticles in medaka fish in different water matrices

Nano-scale lead dioxide (nPbO₂) is an industrial metal oxide nanoparticle that can be also formed as a corrosion by-product from chlorination of Pb-containing plumbing materials. nPbO₂ governs release of toxic lead ion in drinking water and receiving organisms; however, its modes of toxic action regarding neurobehavioral toxicity remain unclear. This study evaluated the toxicity mechanism of nPbO₂ (10 and 20 mg/L) versus its released Pb(II)_aq (100 μg/L) in terms of aqueous chemistry, bioavailability and neurobehavioral toxicity to medaka fish in different water matrices. In very hard water (VHW), dissolved salts enhanced the aggregation and sedimentation of nPbO₂, resulting in higher bioavailability and altered locomotion of treated fish than those fish exposed to nPbO₂ in soft water with humic acid (SW + HA). Transcriptomic results identified six differentially expressed genes with greater altered expression with nPbO₂ than the control or Pb(II)_aq exposure. With VHW exposure, nPbO₂ caused greater altered expression of genes involved in cell adhesion (nlgn1 and epd), cell cytoskeleton (α1-tubulin), and relevant apoptosis (c-fos, birc5.1-a and casp3), as compared with SW + HA or Pb(II)_aq exposure. This study provides novel molecular mechanistic insights into the neurobehavioral nanotoxicity using nPbO₂ and medaka fish as surrogates, suggesting nPbO₂ promotes neurobehavioral dysfunction, leading to adverse outcomes from gene alteration to the organismal level. The identified biomarkers responded specifically to the nPbO₂-induced neurotoxicity in different water matrices can be used for evaluating toxicity risks of small metal oxide particulates on human or aquatic life under environmentally relevant exposures.

Crystalline Biohybrid Materials Based on Protein Cages

Highly ordered superstructures of nanomaterials can be synthesized using protein cages as templates for the assembly of inorganic nanoparticles. Here, we describe in detail the creation of these biohybrid materials. The approach involves computational redesign of ferritin cages, followed by recombinant protein production and purification of the new variants. Metal oxide nanoparticles are synthesized inside the surface-charged variants. The composites are assembled using protein crystallization to yield highly ordered superlattices, which are characterized, for example, with small angle X-ray scattering. This protocol provides a detailed and comprehensive account on our newly established strategy for the synthesis of crystalline biohybrid materials.

Cobalt oxide nanoparticles as a new strategy for enhancing methane production from anaerobic digestion of noxious aquatic weeds

This study investigated the effect of cobalt oxide nanoparticles (Co₃O₄-NPs) supplementation on anaerobic microbial population changes and anaerobic digestion (AD) performance and production. Co₃O₄-NPs (3 mg/L) showed the maximum enhancement of biogas yield over the cow dung (CD) as control and the co-digestion process of CD with water hyacinth (WH) by 58.9 and 27.2 %, respectively. Furthermore, methane (CH₄) yield was enhanced by 89.96 and 43.4 % over CD and co-digestion processes, respectively. Additionally, the microbiological assessment analysis using VIT® gene probe technology showed that Co₃O₄-NPs enhance the viability of total bacterial cells by 9 %. The techno-economic analysis reflects the revenue of this strategy on the highest net energy content of biogas, which was achieved with 3 mg/L Co₃O₄-NPs and was 428.05 kWh with a net profit of 67.66 USD/m³ of the substrate. Therefore, nanoparticle supplementation to the AD process can be considered a promising approach to enhance biogas and CH₄.

Smart nano-in-microparticles to tackle bacterial infections in skin tissue engineering

Chronic wounds (resulting from underlying disease, metabolic disorders, infections, trauma, and even tumours) pose significant health problems. In this work, microparticles, based on polysaccharides (maltodextrin or dextran) and amino acids, and doped with antibacterial nanoparticles (CuO or ZnO NPs) are designed. Smart nano-in-microparticles with a hierarchical 3D structure are developed. The ultimate goal aims at an innovative platform to achieve skin repair and to manage skin colonization by avoiding infection that could delay and even impair the healing process. The microparticles are prepared by spray-drying and cross-linked by heating, to obtain insoluble scaffolds able to facilitate cell proliferation in the wound bed. The nano-in-microparticles are characterized using a multidisciplinary approach: chemico-physical properties (SEM, SEM-EDX, size distribution, swelling and degradation properties, structural characterization - FTIR, XRPD, SAXS - mechanical properties, surface zeta potential) and preclinical properties (in vitro biocompatibility and whole-blood clotting properties, release studies and antimicrobial properties, and in vivo safety and efficacy on murine burn/excisional wound model) were assessed. The hierarchical 3D nano-in microparticles demonstrate to promote skin tissue repair in a preclinical study, indicating that this platform deserves particular attention and further investigation will promote the prototypes translation to clinics.

Application of α-Fe2O3 nanoparticles in controlling antibiotic resistance gene transport and interception in porous media

Metal oxide nanoparticles (MONPs) with a large specific surface area are expected to bind with antibiotic resistance genes (ARGs), thereby controlling ARGs' contamination by reducing their concentration and mobilization. Here, adsorption experiments were carried out and it was found that α-Fe₂O₃ NPs could chemically bind with ARGs (tetM-carrying plasmids) in water with an adsorption rate of 0.04 min^-1 and an adsorption capacity of 7.88 g/kg. Mixing α-Fe₂O₃ NPs into quartz sand column markedly increased the interceptive removal of ARGs from inflow water. The interception rate of 1.0 μg/mL ARGs in ultrapure water (25 mL, 5 pore volumes) through the sand column (plexiglass, length 8 cm, internal diameter 1.4 cm) with 1 g/kg α-Fe₂O₃ NPs was 1.73 times of that through the pure sand column; the interception rate overall increased with increasing addition of α-Fe₂O₃ NPs, reaching 68.8% with 20 g/kg α-Fe₂O₃ NPs. Coexisting Na⁺ (20 mM), Ca²⁺ (20 mM), and acidic condition (pH 4.0) could further increase the interception rate of ARGs by 1 g/kg α-Fe₂O₃ NPs from 21.1% to 86.2%, 90.7%, and 96.2%, respectively. The presence of PO₄^3- and humic acid at environmentally relevant concentrations would not significantly affect the interception of ARGs. In the treatment groups with PO₄^3- and humic acid, the removal rate decreased by only 1.8% and 0.1%, respectively. In addition, the interceptive removal of ARGs by α-Fe₂O₃ NPs-incorporated sand column was even better in actual surface water samples (87.2%) than that in the ultrapure water (21.1%). The findings provide a promising approach to treat ARGs-polluted water.

The effect of 100-200 nm ZnO and TiO2 nanoparticles on the in vitro-grown soybean plants

Engineered nanomaterials are increasingly used in everyday life applications and, in consequence, significant amounts are being released into the environment. From soil, water, and air they can reach the organelles of edible plants, potentially impacting the food chain and human health. The potential environmental and health impact of these nanoscale materials is of public concern. TiO2 and ZnO are among the most significant nanomaterials in terms of production amounts. Our study aimed at evaluating the effects of large-scale TiO2 (~100 nm) and ZnO (~200 nm) nanoparticles on soybean plants grown in vitro. The effect of different concentrations of nanoparticles (10, 100, 1000 mg/L) was evaluated regarding plant morphology and metabolic changes. ZnO nanoparticles showed higher toxicity compared to TiO2 in the experimental set-up. Overall, elevated levels of chlorophylls and proteins were observed, as well as increased concentrations of ascorbic and dehydroascorbic acids. Also, the decreasing stomatal conductance to water vapor and net CO2 assimilation rate show higher plant stress levels. In addition, ZnO nanoparticle treatments severely affected plant growth, while TEM analysis revealed ultrastructural changes in chloroplasts and rupture of leaf cell walls. By combining ICP-OES and TEM results, we were able to show that the nanoparticles were metabolized, and their internalization in the soybean plant tissues occurred in ionic forms. This behavior most likely is the main driving force of nanoparticle toxicity.

Metal and metal oxide-based antiviral nanoparticles: Properties, mechanisms of action, and applications

Certain types of metal-based nanoparticles are effective antiviral agents when used in their original form ("bare") or after their surfaces have been functionalized ("modified"), including those comprised of metals (e.g., silver) and metal oxides (e.g., zinc oxide, titanium dioxide, or iron dioxide). These nanoparticles can be prepared with different sizes, morphologies, surface chemistries, and charges, which leads to different antiviral activities. They can be used as aqueous dispersions or incorporated into composite materials, such as coatings or packaging materials. In this review, we provide an overview of the design, preparation, and characterization of metal-based nanoparticles. We then discuss their potential mechanisms of action against various kinds of viruses. Finally, the applications of some of the most common metal and metal oxide nanoparticles are discussed, including those fabricated from silver, zinc oxide, iron oxide, and titanium dioxide. In general, the major antiviral mechanisms of metal and metal oxide nanoparticles have been observed to be 1) attachment of nanoparticles to surface moieties of viral particles like spike glycoproteins, that disrupt viral attachment and uncoating in host cells; 2) generation of reactive oxygen species (ROS) that denature viral macromolecules such as nucleic acids, capsid proteins, and/or lipid envelopes; and 3) inactivation of viral glycoproteins by the disruption of the disulfide bonds of viral proteins. Several physicochemical properties of metal and metal oxide nanoparticles including size, shape, zeta potential, stability in physiological conditions, surface modification, and porosity can all impact the antiviral efficacy of the nanoparticles.

Use of dissociation degree in lysosomes to predict metal oxide nanoparticle toxicity in immune cells: Machine learning boosts nano-safety assessment

Potential immune responses resulting from exposure to metal oxide nanoparticles (MeONPs) have been the subject of intensive discussion in the last decade. Despite the extensive use of MeONPs in several applications, their toxic effects on immune cells have rarely been predicted in silico because of the complexity of immune responses and the complicated properties of MeONPs. In the present study, machine learning (ML) methods coupled with high-throughput in vitro bioassays were used to develop models for predicting the toxicity of MeONPs in immune cells. An ML model with a high prediction accuracy (97% and 96% in the training and test sets, respectively) was constructed by resolving the class imbalance problem in training and applying an ensembled algorithm. Further, to verify the model, MeONPs outside the scope of the datasets were selected to examine their cytotoxicity experimentally. The model was validated against independent MeONPs, with an accuracy of 91%. ML methods coupled with intracellular imaging revealed that the toxic ions released in the lysosome were an important determinant of toxicity in immune cells. Furthermore, ζ-potential, electronegativity, and size are crucial factors for predicting nanotoxicity. We believe the established modeling framework will provide useful insights for designing and applying safe nanoparticles and facilitating decision-making for environmental and health protection.

Evaluation of Maghemite Nanoparticles-Induced Developmental Toxicity and Oxidative Stress in Zebrafish Embryos/Larvae

Maghemite nanoparticles ([Formula: see text] NPs) have a wide array of applications in various industries including biomedical field. There is an absence of legislation globally for the regulation of the production, use, and disposal of such NPs as they are eventually dumped into the environment where these NPs might affect the living systems. This study evaluates the effect of the [Formula: see text] NP-induced developmental toxicity in zebrafish embryos/larvae. The commercially available Fe₂O₃ NPs were purchased, and zebrafish embryos toxicity test was done by exposing embryos to various concentrations of [Formula: see text] NPs at 1 hpf and analyzed at 96 hpf. Based on the LC₅₀ value (60.17 ppm), the sub-lethal concentrations of 40 and 60 ppm were used for further experiments. Hatching, lethality, developmental malformations, and heartbeat rate were measured in the control and treated embryos/larvae. The ionic Fe content in the media, and the larvae was quantified using ICP-MS and AAS. The biomolecular alterations in the control and treated groups were analyzed using FT-IR. The Fe ions present in the larvae were visualized using SEM-EDXS. In situ detection of AChE and apoptotic bodies was done using staining techniques. Biochemical markers (total protein content, AChE, and Na⁺ K⁺-ATPase) along with oxidants and antioxidants were assessed. A significant decrease in the heartbeat rate and hatching delay was observed in the treated groups affecting the developmental processes. Teratogenic analysis showed increased developmental deformity incidence in treated groups in a dose-dependent manner. The accumulation of Fe was evidenced from the ICP-MS, AAS, and SEM-EDXS. Alterations in AChE and Na⁺ K⁺-ATPase activity were observed along with an increment in the oxidants level with a concomitant decrease in antioxidant enzymes. These results show [Formula: see text] NP exposure leads to developmental malformation and results in the alteration of redox homeostasis.

Surface chemistry of metal oxide nanoparticles: NMR and TGA quantification

Surface functionalization is widely used to control the behavior of nanomaterials for a range of applications. However, methods to accurately quantify surface functional groups and coatings are not yet routinely applied to nanomaterial characterization. We have employed a combination of quantitative NMR (qNMR) and thermogravimetric analysis (TGA) to address this problem for commercial cerium, nickel, and iron oxide nanoparticles (NPs) that have been modified to add functional coatings with (3-aminopropyl)triethoxysilane (APTES), stearic acid, and polyvinylpyrrolidone (PVP). The qNMR method involves quantification of material that is released from the NPs and quantified in the supernatant after removal of NPs. Removal of aminopropylsilanes was accomplished by basic hydrolysis whereas PVP and stearic acid were removed by ligand exchange using sodium hexametaphosphate and pentadecafluorooctanoic acid, respectively. The method accuracy was confirmed by analysis of NPs with a known content of surface groups. Complementary TGA studies were carried out in both air and argon atmosphere with FT-IR of evolved gases in argon to confirm the identity of the functional groups. TGA measurements for some unfunctionalized samples show mass loss due to unidentified components which makes quantification of functional groups in surface-modified samples less reliable. XPS provides information on the presence of surface contaminants and the level of surface hydroxylation for selected samples. Despite the issues associated with accurate quantification using TGA, the TGA estimates agree reasonably well with the qNMR data for samples with high surface loading. This study highlights the issues in analysis of commercial nanomaterials and is an advance towards the development of generally applicable methods for quantifying surface functional groups.

Metal/metal oxide nanoparticles: Toxicity concerns associated with their physical state and remediation for biomedical applications

Metal/metal oxide nanoparticles show promise for various applications, including diagnosis, treatment, theranostics, sensors, cosmetics, etc. Their altered chemical, optical, magnetic, and structural properties have differential toxicity profiles. Depending upon their physical state, these NPs can also change their properties due to alteration in pH, interaction with proteins, lipids, blood cells, and genetic material. Metallic nanomaterials (comprised of a single metal element) tend to be relatively stable and do not readily undergo dissolution. Contrarily, metal oxide and metal alloy-based nanomaterials tend to exhibit a lower degree of stability and are more susceptible to dissolution and ion release when introduced to a biological milieu, leading to reactive oxygen species production and oxidative stress to cells. Since NPs have considerable mobility in various biological tissues, the investigation related to their adverse effects is a critical issue and required to be appropriately addressed before their biomedical applications. Short and long-term toxicity assessment of metal/metal oxide nanoparticles or their nano-formulations is of paramount importance to ensure the global biome's safety; otherwise, to face a fiasco. This article provides a comprehensive introspection regarding the effects of metal/metal oxides' physical state, their surface properties, the possible mechanism of actions along with the potential future strategy for remediation of their toxic effects.

Differential bioaccumulations and ecotoxicological impacts of metal-oxide nanoparticles, bulk materials, and metal-ions in cucumbers grown in sandy clay loam soil

Expanding applications of metal-oxide nanoparticles (NPs) and increased environmental deposition of NPs followed by their interactions with edible crops threaten yields. This study demonstrates the effects of aging (45 days in soil) of four NPs (ZnO, CuO, Al₂O₃, TiO₂; 3.9-34 nm) and their corresponding metal oxide bulk particles (BPs; 144-586 nm) on cucumbers (Cucumis sativus L.) cultivated in sandy-clay-loam field soil and compares these with the phytotoxic effects of readily soluble metal salts (Zn²⁺, Cu²⁺, and Al³⁺). Data revealed the cell-to-cell translocations of NPs, their attachments to outer and inner cell surfaces, nuclear membranes, and vacuoles, and their upward movements to aerial parts. Metal bioaccumulations in cucumbers were found in the order: (i) ZnO-NPs > ZnO-BPs > Zn²⁺, (ii) CuO-NPs > CuO-BPs > Cu²⁺, (iii) Al³⁺> Al₂O₃-NPs > Al₂O₃-BPs and (iv) TiO₂-NPs > TiO₂-BPs. Aging of NPs in soil for 45 days significantly enhanced metal uptake (P ≤ 0.05), for instance aged ZnO-NPs at 1 g kg^-1 increased the uptake by 20.7 % over non-aged ZnO-NPs. Metal uptakes inhibited root (RDW) and shoot (SDW) dry weight accumulations. For Cu species, maximum negative impact (%) was exhibited by Cu²⁺ (RDW:SDW = 94:65) followed by CuO-NPs (RDW:SDW = 78:34) and CuO-BPs (RDW:SDW = 27:22). Aging of NPs/BPs at 1-4 g kg^-1 further enhanced the toxic impact of tested materials on biomass accumulations and chlorophyll formation. NPs also induced membrane damage of root tissues and enhanced levels of antioxidant enzymes. The results of this study suggest that care is required when aged metal-oxide NPs of both essential (Zn and Cu) and non-essential (Al and Ti) metals interact with cucumber plants, especially, when they are used for agricultural purposes.

Dissolution magnitude and kinetics of ZnO nanoparticles mediated by water are dependent on O vacancy abundance: The environmental implications

Metal oxide nanoparticles (NPs) dissolution in water environment is an important issue with regard to their environmental behaviors. The metal ion dissolves from surface defective site, but the effect of defect abundance remains largely unknown. This study aims to reveal this effect using ZnO NPs and O vacancy as the model system. The abundance of O vacancy is modulated by using different precursors and changing calcination atmosphere and temperature. X-ray photoelectron spectroscopy characterization shows that surface O vacancy abundance is effectively modulated to be distributed in a wide range from 15.3% to 41.8%. The deviation of O/Zn mole-ratio from 1.00 is used to denote O vacancy abundance in the bulk crystal, and the deviation reaches up to 0.32. Experiments show that the kinetics and magnitude of ZnO NPs dissolution vary in H₂O, which are highly dependent on O vacancy abundance. In comparison, the specific surface area and aggregation state take minor roles. Particularly, Zn²⁺ dissolution rate in the first hour is more linearly correlated with surface O vacancy abundance than with specific surface area. Defects and their abundances should thus be co-considered with other physicochemical properties to fully understand the dissolution behaviors of metal oxide NPs in water environment. This study is of significance in comprehensively assessing and predicting the environmental risk of metal oxide NPs.

The application prospect of metal/metal oxide nanoparticles in the treatment of osteoarthritis

The current understanding of osteoarthritis is developing from a mechanical disease caused by cartilage wear to a complex biological response involving inflammation, oxidative stress and other aspects. Nanoparticles are widely used in drug delivery due to its good stability in vivo and cell uptake efficiency. In addition to the above advantages, metal/metal oxide NPs, such as cerium oxide and manganese dioxide, can also simulate the activity of antioxidant enzymes and catalyze the degradation of superoxide anions and hydrogen peroxide. Degrading of metal/metal oxide nanoparticles releases metal ions, which may slow down the progression of osteoarthritis by inhibiting inflammation, promoting cartilage repair and inhibiting cartilage ossification. In present review, we focused on recent research works concerning osteoarthritis treating with metal/metal oxide nanoparticles, and introduced some potential nanoparticles that may have therapeutic effects.

Using quasi-SMILES for the predictive modeling of the safety of 574 metal oxide nanoparticles measured in different experimental conditions

The production of nanomaterials continues its rapid growth; however, newly manufactured nanomaterials' environmental and health safety are among the most significant concerns. A safety assessment is usually a lengthy and costly process, so computational studies are often used to complement experimental testing. One of the most time-efficient techniques is structure-activity relationships (SAR) modeling. In this project, we analyzed the Sustainable Nanotechnology (S2NANO) dataset that contains 574 experimental cell viability and toxicity datapoints for Al₂O₃, CuO, Fe₂O₃, Fe₃O₄, SiO₂, TiO₂, and ZnO measured in different conditions. We aimed to develop classification- and regression-based structure-activity relationship models using quasi-SMILES molecular representation. Introduced quasi-SMILES took into consideration all available information, including structural features of nanoparticles (molecular structure, core size, etc.) and related experimental parameters (cell line, dose, exposure time, assay, hydrodynamic size, surface charge, etc.). Resultant regression models demonstrated sufficient predictive power, while classification models demonstrated higher accuracy.

Synergistic biocidal effects of metal oxide nanoparticles-assisted ultrasound irradiation: Antimicrobial sonodynamic therapy against Streptococcus mutans biofilms

BACKGROUND

Antimicrobial sonodynamic therapy (aSDT) is an adjunctive modality, which uses ultrasound irradiation to kill microbial cells by the activation of a sonosensitizer. The aim of this study was to evaluated the synergistic biocidal effects of zinc oxide nanoparticles (ZnO NPs) and titanium dioxide nanoparticles (TiO₂ NPs) as the metal oxide nanoparticles (MONPs)-assisted ultrasound irradiation against Streptococcus mutans biofilms.

MATERIALS AND METHODS

Following preparation and characterization of MONPs, cellular uptake and generation of intracellular reactive oxygen species (ROS) were assessed. After determination of the sub-significant reduction (SSR) doses of ZnO NPs, TiO₂ NPs, ZnO/TiO₂ NPs, and ultrasound intensity against S. mutans, anti-biofilm effects of aSDT were assessed using colorimetric assay, plate counting, and field emission scanning electron microscope (FESEM) analysis. Also, the metabolic activity of S. mutans and the expression levels of glucosyltransferase B (gtfB) as a main virulence factor of S. mutans were evaluated by XTT assay and quantitative real-time polymerase chain reaction following ZnO/TiO₂ NPs^SSR- mediated aSDT.

RESULTS

The finding of this study showed that an incubation time of 5 min was sufficient to achieve maximal uptake of MONPs. The ROS production following aSDT using ZnO NPs, TiO₂ NPs, and ZnO/TiO₂ NPs were ~ 4.1-, 5.6-, and 11.7-fold increase, respectively. The dose-dependent reduction in cell viability of S. mutans was revealed by increasing the concentrations of ZnO NPs, TiO₂ NPs, ZnO/TiO₂, as well as ultrasound intensities. According to the data, 1.5 µg/mL, 3.1 µg/mL, 25 µg/mL, and 0.75 W/cm² were considered as the SSR doses of ZnO/TiO₂ NPs, ZnO NPs, TiO₂ NPs, and ultrasound intensity, respectively (P>0.05). ZnO/TiO₂ NPs^SSR-mediated aSDT showed a significantly higher biofilm inhibitory activity than the other treatment groups (P<0.05). Based on the FE-SEM analysis, aSDT based on the ZnO/TiO₂ NPs^SSR had a strong anti-biofilm effect against preformed biofilms of S. mutans on the enamel slabs. Also, the metabolic activity of S. mutans and the expression levels of gtfB were significantly decreased to 85.5% and 12.3-fold, respectively following ZnO/TiO₂ NPs^SSR-mediated aSDT (P<0.05). No considerable difference was observed in anti-biofilm activity between ZnO/TiO₂ NPs^SSR- mediated aSDT and 0.2% CHX (P>0.05).

CONCLUSION

The results revealed anti-metabolic and anti-biofilm potential activities of ZnO/TiO₂ NPs-mediated aSDT against S. mutans with the highest cellular uptake and ROS generation.

CuO, ZnO, and γ-Fe2O3 nanoparticles modified the underground biomass and rhizosphere microbial community of Salvia miltiorrhiza (Bge.) after 165-day exposure

To investigate whether metal oxide nanoparticles exhibit toxicity or positive effects on medicinal plants, CuO, ZnO, and γ-Fe₂O₃ nanoparticles (NPs), at concentrations of 100 and 700 mg kg^-1_, were introduced into the cultivation of Salvia miltiorrhiza (Bge.). Metal elemental contents, chemical constituents, biomass and the structure of the rhizosphere microbial community was used to estimate this effect. The results indicated CuO NPs increased the Cu content and ZnO NPs increased the Zn content significantly as exposure increased, γ-Fe₂O₃ NPs had no significant effect on Fe content in S. miltiorrhiza roots, while 100 mg kg^-1 ZnO and CuO NPs significantly decreased the Fe content in roots. Additionally, ZnO and γ-Fe₂O₃ NPs increased the underground biomass, and diameter of S. miltiorrhiza roots. However, these three metal oxide nanoparticles had no significant effect on total tanshinones, while the 700 mg kg^-1 γ-Fe₂O₃ NPs treatment increased salvianolic acid B content by 36.46%. High-throughput sequencing indicated at 700 mg kg^-1 ZnO NPs, the relative abundance of Humicola (Zn superoxide dismutase producer), was notably increased by 97.46%, and that of Arenimonas, Thiobacillus and Methylobacillus (taxa related to heavy metal tolerance) was significantly increased by 297.14%, 220.26% and 107.00%. The 700 mg kg^-1 CuO NPs exposure caused a significant increase in the relative abundances of Sphingomonas (a copper-resistant and N₂-fixing genus) and Flavisolibacter (stripe rust biocontrol bacteria) by 127.32% and 118.33%. To our best knowledge, this is the first study to examine the potential impact of NPs on the growth and rhizosphere microorganisms of S. miltiorrhiza.

Biomedical applications of metal oxide nanoparticles in aging and age-associated diseases

Metal oxide nanoparticles are known to exhibit unique properties such as catalyzing the neutralization of superoxide anions, hydroxyl radicals, hydrogen peroxides and behave as antioxidant enzymes. Oxidative stress, damage and chronic inflammation are major causes and consequences of aging and age-associated disorders. With the increasing popularity of metal oxide nanoparticles, they have been applied in various age-related pathologies using their antioxidant property. Metal oxide nanoparticles have been used as diagnostic, therapeutic, and as theranostics. This review summarizes the applications of metal oxide nanoparticles in aging and age-associated disorders such as cardiovascular diseases, diabetes, cancer, neurodegenerative disorders. Oxidative stress plays a central role in the activation of inflammatory pathways, disturbing the mitochondrial function, decreasing the telomere length and leading the cell towards senescence or death. Oxidative damage is the common pathway in the progression of aging and related diseases. Metal oxide nanoparticles scavenge or precisely detect the generated reactive oxygen species, hence applied in both diagnostics and therapeutics.

Zeta potentials (ζ) of metal oxide nanoparticles: A meta-analysis of experimental data and a predictive neural networks modeling

Zeta potential is usually measured to estimate the surface charge and the stability of nanomaterials, as changes in these characteristics directly influence the biological activity of a given nanoparticle. Nowadays, theoretical methods are commonly used for a pre-screening safety assessments of nanomaterials. At the same time, the consistency of data on zeta potential measurements in the context of environmental impact is an important challenge. The inconsistency of data measurements leads to inaccuracies in predictive modeling. In this article, we report a new curated dataset of zeta potentials measured for 208 silica- and metal oxide nanoparticles in different media. We discuss the data curation framework for zeta potentials designed to assess the quality and usefulness of the literature data for further computational modeling. We also provide an analysis of specific trends for the datapoints harvested from different literature sources. In addition to that, we present for the first time a structure-property relationship model for nanoparticles (nano-SPR) that predicts values of zeta potential values measured in different environmental conditions (i.e., biological media and pH).

Novel mycosynthesis of Co3O4, CuO, Fe3O4, NiO, and ZnO nanoparticles by the endophytic Aspergillus terreus and evaluation of their antioxidant and antimicrobial activities

Several fungal endophytes were isolated and screened for their ability to biosynthesize a variety of nanoparticles (NPs), as a potentially simple and eco-friendly method with low cost. Among these fungi, a promising isolate named ORG-1 was found able to synthesize five different NPs types: Co₃O₄NPs, CuONPs, Fe₃O₄NPs, NiONPs, and ZnONPs. The ORG-1 strain was identified as Aspergillus terreus according to the morphological and molecular studies. Synthesis of these NPs was initially monitored by UV-Vis spectroscopy and further characterized by Fourier transform infrared spectroscopy. X-ray diffraction patterns revealed their crystalline structure. Dynamic light scattering analysis was applied to study the particle size distribution and stability. Transmission electron microscope studies indicated the morphology of the synthesized NPs. Additionally, the biological activities of the in vitro antioxidant and antimicrobial potentials were evaluated. Co₃O₄NPs, CuONPs, Fe₃O₄NPs, NiONPs, and ZnONPs showed promising antioxidant activity with 50% inhibitory concentrations of 85.44, 96.74, 102.41, 87.41, and 108.67 μg mL^-1, respectively. The synthesized NPs exhibited potent antimicrobial activities against several plant and human pathogens. To our knowledge, this is the first report on the use of one microbial strain for the synthesis of a variety of NPs. This study suggests endophytic fungi as new and alternate platforms with an exceptional potentiality for the synthesis of NPs with promising activities. KEY POINTS: • Discovery of a promising endophytic fungus for synthesis of five different types of NPs. • Mycosynthesis and characterization of all the synthesized NPs were investigated. • The synthesized NPs showed promising antioxidant and antimicrobial activities.

Mutagenicity Evaluation of Nanoparticles by the Ames Assay

The Ames assay is a classic and robust method for identifying and evaluating chemical mutagens that reverse the mutations of Salmonella typhimurium and/or Escherichia coli bacteria strains with amino acid synthesis defects. It is also called the bacterial reverse mutation assay. Ames assay has been widely used for detecting genetic toxicity of many chemicals and gained increased applications in risk assessment of emerging environmental pollutants such as nanomaterials. In this chapter, we presented a detailed step-by-step method using the Ames assay to detect potential mutagenicity of metal oxide nanoparticles. The strategy to use the liver S9 fraction for bioactivation and a preincubation procedure is recommended. This method is easy to use to test genetic toxicity of other environmental contaminants and new chemicals.

Recent advances in chemical surface modification of metal oxide nanoparticles with silane coupling agents: A review

Nowadays, metal oxide nanoparticles (NPs) have been applied in various fields of nanotechnology including catalysis of chemical reactions, drug delivery, water treatment, textile industries, polymer composites, adhesives, and coatings. The greatest challenge in relation to metal oxide NPs is high tendency to aggregation. Chemical surface modification of metal oxide NPs has gained widely interest to control of dispersion and aggregation of NPs. Silane modifiers are one of the most important bifunctional modifiers that are frequently used for surface treatment of metal oxide NPs. In this review paper, we first focus on the synthesis, surface thermodynamic properties, surface modification techniques, and kinetic of silanization reaction of metal oxide NPs. Then, the recent development in using silane modifiers for treatment of metal oxide NPs in various applications were investigated. It was found that the unmodified NPs have high surface energy and are thermodynamically unstable. The thermodynamic properties of NPs including G_m^s, H_m^s, and S_m^sincrease with decreasing the particle size. Aggregation phenomena is the simple way to reduce the excess surface energy of NPs that leads to an increase in particle size. Therefore, the chemical surface modification of NPs using silane modifiers can be used as an effective method for the prevention of NPs agglomeration and improvement of NPs stability.

Benchmark dose analyses of toxic endpoints in lung cells provide sensitivity and toxicity ranking across metal oxide nanoparticles and give insights into the mode of action

INTRODUCTION

The benchmark dose (BMD) is a dose that produces a predetermined change in the response rate of an adverse effect. This approach is increasingly utilized to analyze quantitative dose-response relationships. To proof this concept, statistical analysis was compared with the BMD approach in order to rank the sensitivity as well as the toxicity and to describe the mode of action.

METHODS

Bronchial (BEAS-2B) and alveolar epithelial cells (A549) were exposed to a wide concentration range (0.4-100 μg/mL) of five metal oxide nanoparticles (CeO₂, CuO, TiO₂, ZnO, ZrO₂). Eight toxicity endpoints were determined representing integrity of lysosomal and cell membrane, oxidative stress level, glutathione based detoxification (glutathione S-transferase), oxidative metabolism (cytochrome P450), alteration of the mitochondrial membrane potential, alteration of phase II antioxidative enzyme (NAD(P)H:quinone oxidoreductase), and de novo DNA synthesis.

RESULTS

Based on the BMD calculated for the most sensitive test, the toxicity decreased in the following order: ZnO > CuO > TiO₂>ZrO₂>CeO₂ in BEAS-2B. Both statistical evaluation methods revealed a higher sensitivity of BEAS-2B cells. The BMD-derived mode of action for CuO confirmed the existing hypotheses and provided insights into less known mechanisms.

CONCLUSION

The findings proofed that BMD analysis is an effective tool to evaluate different aspects of risk assessment.

Zn2+ leakage and photo-induced reactive oxidative species do not explain the full toxicity of ZnO core Quantum Dots

Metal oxide nanoparticles (NPs), and among them metal oxides Quantum Dots (QDs), exhibit a multifactorial toxicity combining metal leaching, oxidative stress and possibly direct deleterious interactions, the relative contribution of each varying according to the NP composition and surface chemistry. Their wide use in public and industrial domains requires a good understanding and even a good control of their toxicity. To address this question, we engineered ZnO QDs with different surface chemistries, expecting that they would exhibit different photo-induced reactivities and possibly different levels of interaction with biological materials. No photo-induced toxicity could be detected on whole bacterial cell toxicity assays, indicating that ROS-dependent damages, albeit real, are hidden behind a stronger source of toxicity, which was comforted by the fact that the different ZnO QDs displayed the same level of cell toxicity. However, using in vitro DNA damage assays based on quantitative PCR, significant photo-induced reactivity could be measured precisely, showing that different NPs exhibiting similar inhibitory effects on whole bacteria could differ dramatically in terms of ROS-generated damages on biomolecules. We propose that direct interactions between NPs and bacterial cell surfaces prime over any kind of intracellular damages to explain the ZnO QDs toxicity on whole bacterial cells.

Acute toxicity evaluation of nanoparticles mixtures using luminescent bacteria

As the application of nanoparticles (NPs) and their release to the environment has increased, it is important to verify their toxicity, with a special emphasis on particle solubilization and the interaction of NP mixtures. In the current study, a model luminescent bacteria, Vibrio fischeri, was employed to test the acute toxicity of individual NPs and their binary mixtures, including metal NPs (ZnNPs, CuNPs) and metal oxide NPs (ZnONPs, CuONPs). The independent action model was used to reflect the synergistic, additive, or antagonistic interactions of binary mixtures of these NPs. The results showed that the median effective concentration (EC₅₀) inhibited the luminescence of V. fischeri were 20.5, 4.1, 11.6, and 118.7 mg L^-1 for ZnNPs, CuNPs, ZnONPs, and CuONPs, respectively, suggesting that the toxicity of these NPs to V. fischeri were as the following order: CuNPs > ZnONPs > ZnNPs > CuONPs. The combined effect of NPs were found to be antagonistic for CuNPs-ZnONPs and CuNPs-CuONPs, synergistic for CuONPs-ZnNPs, CuNPs-ZnNPs, and ZnONPs-CuONPs, and additive for ZnNPs-ZnONPs, revealing a complex pattern of possible interactions. The differences of dissolved metal ions partly accounted for the different combined toxicity of binary mixtures of NPs. The findings have important implications for better understanding the true environmental risk of NP mixtures.

Nanostructured metal oxides and its hybrids for photocatalytic and biomedical applications

Metal oxide nanoparticles and its hybrids are deemed to be one of the most attractive materials in an extensive range of applications due to their impressive optical, electronic, photocatalytic, and biological properties. Metal oxide based nanomaterials with extraordinary characteristics have been proposed, prepared, and used as main materials in the recent area of photocatalysis and biomedicine, due to their non-toxic nature, large specific surface area, useful optical bandgap, and high biological activity. Herein, this review reveals the recent advance development in the area like photocatalytic, anticancer and antibacterial performance of metal oxide nanomaterials for multidimensional applications. Consequently, we also focused on the encountered difficulties and prospects for the future application of metal oxide-based composites as promising candidates for the development of highly efficient photocatalytic and biomedical systems. This review article also delivers advanced knowledge to the scientific community who intends to design efficient photocatalytic and biomedical systems.

Metal/Metal Oxide Nanoparticles: Toxicity, Applications, and Future Prospects

The ever-growing resistance of pathogens to antibiotics and crop disease due to pest has triggered severe health concerns in recent years. Consequently, there is a need of powerful and protective materials for the eradication of diseases. Metal/metal oxide nanoparticles (M/MO NPs) are powerful agents due to their therapeutic effects in microbial infections. In this context, the present review article discusses the toxicity, fate, effects and applications of M/MO NPs. This review starts with an introduction, followed by toxicity aspects, antibacterial and testing methods and mechanism. In addition, discussion on the impact of different M/MO NPs and their characteristics such as size, shape, particle dissolution on their induced toxicity on food and plants, as well as applications in pesticides. Finally, prospective on current and future issues are presented.

Sublethal effects of chronic exposure to CdO or PbO nanoparticles or their binary mixture on the honey bee (Apis millefera L.)

Cadmium and lead-based nanotechnologies are increasingly used in agricultural, industrial, and biological processes; however, potential adverse effects of nanomaterials on honey bees had not been assessed. In this study, effects of exposures to sublethal concentrations of PbO and CdO nanoparticles (NPs), either separately or in combination on honey bee (Apis mellifera) workers, were assessed. Honey bee workers were orally exposed for 9 days under laboratory conditions to sublethal concentrations (20% of LC₅₀) of CdO (0.01 mg/ml^-) and PbO (0.65 mg/ml^-) NPs either separately or combined. Effects on survival, feeding rate, activity of acetylcholinesterase (AChE), and expression of selected stress-related detoxifying enzymes were quantified. Survival and feeding rates decreased particularly in bees fed sugar syrup containing CdO NPs or binary mixtures of NPs of both metal oxides. Expressions of genes involved in detoxification of xenobiotics were affected by various combinations. Expression of catalase was 13.6-fold greater in bees consumed sugar syrup diet containing binary mixture of sublethal concentrations of both CdO and PbO NPs than it was in unexposed, control bees. AChE activity in heads of honey bees was inhibited by 3.8-, 3.0-, and 2.8-fold relative to control, respectively, in response to exposure to Cd or/and Pb oxide NPs. This result indicates potential neurotoxic effects of these NPs to honey bees. CdO NPs exhibited greater potency to honey bees. Overall, sublethal concentrations of CdO or/and PbO NPs resulted in detrimental effects on honeybee workers.

Bioavailability and translocation of metal oxide nanoparticles in the soil-rice plant system

To determine the bioavailability and translocation of metal oxide nanoparticles (MONPs) in the soil-rice plant system, we examined the accumulation and micro-distribution of ZnO nanoparticles (NPs), CuO NPs and CeO₂ NPs (50, 100 and 500 mg/kg) in the paddy soil and rice plants under flooded condition for 30 days using single-step chemical extraction and diffusive gradients in thin films (DGT) technique combined with micro X-ray fluorescence spectroscopy (μ-XRF). The results show that various MONPs changed the soil properties, especially the redox potential was enhanced to -165.33 to -75.33 mV compared to the control. The extraction efficiency of Zn, Cu and Ce in the paddy soil from high to low was EDTA, DTPA, CaCl₂ and DGT. Moreover, exposure to 500 mg/kg CuO NPs and CeO₂ NPs induced the primary accumulation of Cu and Ce elements in rice roots as high as 235.48 mg Cu/kg and 164.84 mg Ce/kg, respectively, while the Zn concentration in shoots was up to 313.18 mg/kg under highest ZnO NPs with a 1.5 of translocation factor. The effect of MONPs on the plant growth was mainly related to the chemical species and solubility of MONPs. Micro-XRF analysis shows that Zn was mostly located in the root cortex while Cu was primarily accumulated in the root exodermis and few Ce distributed in the root. Pearson correlation coefficients indicate that only DTPA-extracted metals in soil were significantly and well correlated to the Zn, Cu and Ce accumulation in rice seedlings exposed to MONPs. This work is of great significance for evaluating the environmental risks of MONPs in soil and ensuring the safety of agricultural products.

Age-related physicochemical differences in ZnO nanoparticles in the seawater and their bacterial interaction

To assess the fate and behavior of engineered nanoparticles in the environment, it is important to examine the physicochemical and toxicological transformation of nanoparticles as they age in seawater. In this study, we investigated how aging and seawater conditions altered the physiochemical structure of nanoparticles and affected their interactions with bacteria. For this purpose, zinc oxide nanoparticles were aged under different seawater conditions by keeping them in 1%, 10%, and 100% seawater for 1 day and 20 days. The main physicochemical parameters (surface chemistry, chemical composition, particle size, and zeta potential) and toxicity of aged nanoparticles towards gram-negative Pseudomonas aeruginosa and gram-positive Staphylococcus aureus were examined. The results indicated that aged zinc oxide nanoparticles in various concentrations of seawater changed their surface chemistry, chemical composition, particle size, and zeta potentials. Growth inhibition results were observed in that the inhibition of gram-negative (Pseudomonas aeruginosa) bacteria was higher compared with the gram-positive (Staphylococcus aureus) bacteria, and Staphylococcus aureus activated with the aged zinc oxide nanoparticles. Also, the results showed that the key biochemical factors affected by the aging and seawater concentration.

Molecular characterization of virulence and drug resistance genes-producing Escherichia coli isolated from chicken meat: Metal oxide nanoparticles as novel antibacterial agents

Escherichia coli is a major global foodborne pathogen, infecting a wide range of animals and contaminating their meat products. E. coli, can lead to high morbidity and mortality with a huge economic loss especially if foodborne diseases are associated with multidrug resistant (MDR)- and multivirulent-producing pathogens. Due to the increased resistance to common antimicrobials used to treat livestock animals and human infections, the discovery of new and innovative nanomaterials are in high demand. Recently, metal oxides can be considered as effective inorganic agents with antimicrobial features. Hence, this study might be the first to evaluate the efficiency of metal oxide nanoparticles (MO-NPs) as novel antibacterial agents against MDR/multivirulent E. coli pathogens isolated from chicken meat. The occurrence of pathogenic E. coli was determined in fresh warm chicken meat parts (breast, thigh, liver and gizzard). Ninety-one of 132 (69%) chicken meat parts were Escherichia -positive with E. coli as the only species isolated. Out of identified 240 E. coli strains, 72.5% (174/240) were classified as MDR E. coli strains. Fifty-five profile patterns were obtained. From each pattern, one strain was randomly selected for further analysis of virulence and resistance genes. Extracted DNA was assessed for the presence of antibiotic resistance genes (bla_IMP-7, bla_IMP-25, bla_TEM, bla_SHV, bla_OXA-2, tetA, aadA, and aac(3)-IV) and virulence genes (stx1, stx2, hlyA, eaeA, aggR, eltB, estIb, papA, afa and hlyD). Clustering analyses revealed that 10 E. coli harboring the highest number of virulence and resistance genes were shifted together into one cluster designated as cluster X. The average activities of zinc peroxide nanoparticles (ZnO₂-NPs) were higher than that of zinc oxide nanoparticles (ZnO-NPs) and titanium dioxide nanoparticles (TiO₂-NPs) by 20% and 29%, respectively. The anti-inflammatory activity of ZnO₂-NPs in comparison with aspirin was assessed using membrane stabilization, albumin denaturation, and proteinase inhibition methods. Significant anti-inflammatory activity of ZnO₂-NPs was achieved at concentration levels of 500-1000 μg/ml. It seems that MO-NPs are effective alternative agents, since they exhibited a competitive antibacterial capability against MDR/multivirulent-producing E. coli pathogens isolated from chicken meat. Hence, ZnO₂-NPs are a promising nanoparticles-based material for controlling foodborne pathogens, thereby valued for food safety applications.

Mathematical modeling of cytotoxicity of metal oxide nanoparticles using the index of ideality correlation criteria

Several types of metal oxide nanoparticles (MO-NPs) are often utilized as one of the novel class of materials in the pharmaceutical industry and human health. The wide use of MO-NPs forces an enhanced understanding of their potential impact on human health and the environment. The research aims to investigate and develop a nano-QFAR (nano-quantitative feature activity relationship) model applying the quasi-SMILES such as cell line, assay, time exposition, concentration, nanoparticles size and metal oxide type for prediction of cell viability (%) of MO-NPs. The total set of 83 quasi-SMILES of MO-NPs divided into training, validation and test sets randomly three times. The statistical model results based on the balance of correlation target function (TF₁) and index of ideality correlation target function (TF₂) and the Monte Carlo optimization were compared. The comparison of two target function results indicated that TF₂ improves the predictability of models. The significance of various eclectic features of both increase and decrease of cell viability (%) is provided. Mechanistic interpretation of significant factors for the model are proposed as well. The sufficient statistical quality of three nano-QFAR models based on TF₂ reveals that the developed models can be efficiency for predictions of the cell viability (%) of MO-NPs.

Evaluating genotoxicity of metal oxide nanoparticles: Application of advanced supervised and unsupervised machine learning techniques

Presence of missing data points in datasets is among main challenges in handling the toxicological data for nanomaterials. As the processing of missing data is an important part of data analysis, we have introduced a read-across approach that uses a combination of supervised and unsupervised machine learning techniques to fill the missing values. A series of classification models (supervised learning) was developed to predict class label, and self-organizing map approach (unsupervised learning) was used to estimate relative distances between nanoparticles and refine results obtained during supervised learning. In this study, genotoxicity of 49 silicon and metal oxide nanoparticles in Ames and Comet tests. Collected literature data did not demonstrate significant variations related to the change of size including selected bulk materials. Genotoxicity-related features of nanomaterials were represented by ionic characteristics. General tendencies found in the current study were convincingly linked to known theories of genotoxic action at nano-level. Mechanisms of primary and secondary genotoxic effects were discussed in the context of developed models.

Nanosized titanium dioxide UV filter increases mixture toxicity when combined with parabens

To address the concern about the environmental impact of engineered nanoparticles frequently used in the recently marketed personal care and hygiene products (PCPs), we conducted a toxicity assessment and determined the EC₅₀ values of the nanosized inorganic UV filter TiO₂ (nano-TiO₂), as well as those of the organic UV filter oxybenzone (BP3) and three parabens (methyl, propyl, and benzylparaben) present in most PCPs formulation. The bioassays were carried out through standardized toxicity bioassays on two environmentally relevant aquatic species i.e. Daphnia magna and Phaeodactylum tricornutum. For nano-TiO₂ 48 h EC₅₀ on D. magna was 3.09 mgL^-1 and for parabens ranged from 32.52 to 1.35 mgL^-1. The two most toxic compounds on D. magna, nano-TiO₂ and benzylparaben (BzP), were further tested with the algae. For nano-TiO₂ 72 h EC₅₀ value was 2.27 mgL^-1 and for BzP it was 10.61 mgL^-1. In addition, D. magna was exposed to selected binary mixtures of the target compounds i.e. nano-TiO₂+BP3, nano-TiO₂+BzP and BP3+BzP On the endpoint of 48 h, a synergistic action was observed for nano-TiO₂+BP3 and nano-TiO₂+BzP, but an antagonistic effect occurred in the mixture BP3+BzP. These findings suggest that nano-TiO₂ can increase the toxicity of the mixture when combined with other compounds.