Sunscreen Enhancement of Octyl Methoxycinnamate Microcapsules by Using Two Biopolymers as Wall Materials

Acid-catalyzed phenolation of lignin with tea polyphenol: Enhancing uv resistance and oxidation resistance for potential applications

The rapid development of the industry has led to the destruction of the earth's ozone layer, resulting in an increasingly serious problem of excessive ultraviolet radiation. Exploring effective measures to address these problems has become a hot topic. Lignin shows promise in the design and preparation of anti-ultraviolet products due to its inherent properties. However, it is important to investigate way to enhance the reactivity of lignin and determine its application form in related products. In this study, phenolic reactions with tea polyphenols were conducted through acid-catalyzed conversion, utilizing organic solvent lignin as the primary material. The phenolic hydroxyl content of the original lignin increased significantly by 218.8 %, resulting in notable improvements in UV resistance and oxidation resistance for phenolic lignin. Additionally, micro-nanocapsule emulsions were formed using phenolic lignin particles as surfactants through ultrasonic cavitation with small-molecule sunscreens. A bio-based sunscreen was prepared with phenolated lignin micro-nanocapsules as the active ingredient, achieving an SPF 100.2 and demonstrating excellent stability. The sunscreen also exhibited strong antioxidant properties and impermeability, ensuring user safety. This research offers a current solution for improving the application of lignin in sunscreens while also broadening the potential uses of plant-based materials in advanced functional products.

Design of Bombyx mori (B. mori) Silk Fibroin Microspheres for Developing Biosafe Sunscreen

Sunscreens play a crucial role in protecting the skin from ultraviolet (UV) damage. However, present commercial sunscreens have a tendency to generate free radicals in the UV window, resulting in serious inflammatory responses and health problems. In this study, we demonstrate that silk fibroin microspheres (SFMPs) assembled from regenerated silk fibroin (SF) could scavenge free radicals while preventing UV irradiation and thus present a promising sunscreen. The SFMP reflected more UV light than SF and presented a higher stability than that of organic commercial sunscreens. In vitro analysis proved that SFMP could more efficiently scavenge the hydroxy radical and reduce the intracellular reactive oxygen than titanium dioxide (TiO2). In vivo experiments exhibited that SFMP provided stronger skin protection against UV irradiation than commercial sunscreens and TiO2. Furthermore, SFMP treatment significantly inhibited the skin inflammatory response. This work suggests that the SFMP has great potential to be developed into a biosafe sunscreen.

Advances in protein-based microcapsules and their applications: A review

Due to their excellent emulsification, biocompatibility, and biological activity, proteins are widely used as microcapsule wall materials for encapsulating drugs, natural bioactive substances, essential oils, probiotics, etc. In this review, we summarize the protein-based microcapsules, discussing the types of proteins utilized in microcapsule wall materials, the preparation process, and the main factors that influence their properties. Additionally, we conclude with examples of the vital role of protein-based microcapsules in advancing the food industry from primary processing to deep processing and their potential applications in the biomedical, chemical, and textile industries. However, the low stability and controllability of protein wall materials lead to degraded performance and quality of microcapsules. Protein complexes with polysaccharides or modifications to proteins are often used to improve the thermal instability, pH sensitivity, encapsulation efficiency and antioxidant capacity of microcapsules. In addition, factors such as wall material composition, wall material ratio, the ratio of core to wall material, pH, and preparation method all play critical roles in the preparation and performance of microcapsules. The application area and scope of protein-based microcapsules can be further expanded by optimizing the preparation process and studying the microcapsule release mechanism and control strategy.

Recent developments in sunscreens based on chromophore compounds and nanoparticles

Sunscreen formulations have undergone significant advancements in recent years, with a focus on improving UV radiation protection, photostability, and environmental sustainability. Chromophore compounds and nanoparticles have emerged as key components in these developments. This review highlights the latest research and innovations in chromophore compounds and nanoparticle-based sunscreens. It discusses the role of nanoparticles, such as zinc oxide and titanium dioxide, in scattering and absorbing UV radiation while remaining cosmetically acceptable. Chromophore compounds, encapsulated in nanoparticles, are explored for their potential to enhance UV protection by absorbing specific wavelengths of light. Additionally, advances in photo-stability, broad-spectrum protection, antioxidant inclusion, and biodegradability are discussed. The evolving landscape of sunscreen technology aims to provide more effective and environment-friendly solutions for safeguarding skin from the sun's harmful effects.

Stability improvement of UV-filter between methoxy cinnamic acid derivatives and cyclodextrins inclusion complexes based on DFT and TD-DFT investigations

Structures and UV-vis absorption spectra of the host-guest interaction of the methoxy cinnamic acid (MCA) derivatives and cyclodextrins (CDs) were performed by using the density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations. All geometries of MCA derivatives (4-MCA, 245-MCA, 246-MCA), three types of CD (αCD, βCD, γCD), and five host-guest inclusion complexes between MCA and CD consisting of 4-MCA/αCD (1), 4-MCA/βCD (2), 245-MCA/βCD (3), 246-MCA/βCD (4), and 246-MCA/γCD (5) were fully optimized by using the M06-2X/6-31G (d,p) levels of theory. Two orientations (A and B) of the MCA guest molecule were considered. Upon examining the optimized geometry, five complexes of the methoxy cinnamic acid molecules are located inside the cavity of CD. Orientation B was more stable than orientation A because of the stronger intermolecular hydrogen bonds between the hydroxyl group of CD and the carboxylic group of MCA. The results indicated that the intermolecular hydrogen bond is mainly the driving force of formation between methoxy cinnamic acid and cyclodextrins. To reveal the host-guest interaction that is relevant to UV-filter compounds, the UV-vis absorption spectra were performed using TD-DFT calculations. The obtained results confirmed that orientation B is the most stable orientation and can absorb in both UVB and UVA regions which is similar to the parent MCA. Therefore, this knowledge will bring to understand the host-guest interaction between methoxy cinnamic acid and cyclodextrin complexes. The theoretical results are expected to provide valuable information for improving the stability of further UV-filter compounds.

Preparation of enzymolysis porous corn starch composite microcapsules embedding organic sunscreen agents and its UV protection performance and stability

In this paper, a natural composite wall material sunscreen microcapsule was prepared, which significantly improved the SPF value and photostability of the embedded sunscreen agents. Using modified porous corn starch and whey protein as wall materials, the sunscreen agents 2-[4-(diethylamino)-2-hydroxybenzoyl] benzoic acid hexyl ester and ethylhexyl methoxycinnamate were embedded by adsorption, emulsion, encapsulation and solidification. The embedding rate of the obtained sunscreen microcapsules was 32.71 % and the average size was 7.98 μm; the enzymatic hydrolyzed starch formed a porous structure, its X-ray diffraction pattern did not change significantly, and the specific volume and oil absorption rate increased by 39.89 % and 68.32 %, respectively, compared with those before enzymatic hydrolyzed; The porous surface of the starch after embedding the sunscreen was covered and sealed with whey protein. 120 h sunscreen penetration rate was lower than 12.48 %; Compared with the lotion containing the same amount of sunscreen but not encapsulated, the SPF value of the lotion containing sunscreen microcapsules increased by 62.24 %, and the photostability of sunscreen microcapsules increased by 66.28 % within 8 h under the irradiation intensity of 25 w/m². The wall material and the preparation method are natural and environmentally friendly, and have a good application prospect in low-leakage drug delivery system.

Chitosan-coated mesoporous silica particles as a plastic-free platform for photochemical suppression and stabilization of organic ultraviolet filters

Photochemical instability and reactivity of organic ultraviolet (UV) filters not only degrade the performance of sunscreen formulations but also generate toxic photodegradation products and reactive oxygen species (ROS). Although the encapsulation of organic UV filters into synthetic polymer particles has been widely investigated, synthetic plastics were recently banned for personal care and cosmetic products due to marine and coastal pollution issues. Here we present a plastic-free, photochemically stable and inactive UV filter platform based on chitosan-coated mesoporous silica microparticles, denoted 'mSOCPs', incorporating octyl methoxycinnamate (OMC) as a sunscreen agent. Sunlight induced the degradation of ∼80% free OMC in artificial sweat in 1 h at room temperature, while only 20% of OMC degraded for 3 h when encapsulated within mSOCPs. Moreover, mSOCPs efficiently suppressed the photochemical generation of ROS by about 99% through the combined effects of the mesoporous silica structure and chitosan coating. Accordingly, mSOCPs substantially increased the cell viability of fibroblasts exposed to UV irradiation. This work demonstrates that the biopolymer coatings of mesoporous inorganic particles can be a promising approach to the plastic-free encapsulation of organic UV filters for suppressing their photochemical reactivity and degradation.

Enhanced Sunscreen Effects via Layer-By-Layer Self-Assembly of Chitosan/Sodium Alginate/Calcium Chloride/EHA

The sunscreen nanocapsules were successfully synthesized by the way of layer-by-layer self-assembly using charged droplets (prepared by emulsification of LAD-30, Tween-80 and EHA (2-Ethylhexyl-4-dimethylaminobenzoate)) as templates. Chitosan/sodium alginate/calcium chloride were selected as wall materials to wrap EHA. The emulsions with the ratio of Tween-80 to EHA (1:1) were stable. A stable NEI negative emulsion can be obtained when the ratio of Tween-80 and LAD-30 was 9:1. Chitosan solutions (50 kDa, 0.25 mg/mL) and sodium alginate solutions (0.5 mg/mL) were selected to prepare nanocapsules. The nanocapsules were characterized via some physico-chemical methods. Based on the synergistic effects of the electrostatic interaction between wall materials and emulsifiers, EHA was effectively encapsulated. DLS and TEM showed that the sunscreen nanocapsules were dispersed in a spherical shape with nano-size, with the increasing number of assembly layers, the size increased from 155 nm (NEI) to 189 nm (NEII) to 201 nm (NEIII) and 205 nm after solidification. The release studies in vitro showed sustained release behavior of the nanocapsules were observed with the increase of the number of deposition layers, implying a good coating effect. The sunscreen nanocapsules could control less than 50% the release of EHA after crosslinking of calcium chloride and sodium alginate, which also could effectively avoid the stimulation of the sun protection agent on the skin.

Photoprotection and Photostability of a New Lignin-Gelatin-Baccharis antioquensis-Based Hybrid Biomaterial

The aim of this study was to develop a new hybrid biomaterial that could photo-stabilize and improve the photoprotective capacity of a Baccharis antioquensis extract. Different combinations of lignin/gelatin/natural extract were applied to prepare hybrid biomaterial nanoparticles (NPs), which were then incorporated into an emulsion. The in vitro photoprotection and photostability were evaluated. The methanolic extract showed high phenolic content (646.4 ± 9.5 mg GAE/g dry extract) and a DPPH radical assay revealed that the antiradical capacity of the extract (0.13 to 0.05 g extract/mmol DPPH) was even better than that of BHT. The particle size of the hybrid biomaterial ranged from 100 to 255 nm; a polydispersity index (PdI) between 0.416 and 0.788 is suitable for topical use in dermocosmetic products. The loading capacity of the extract ranged from 27.0 to 44.5%, and the nanoparticles (NPs) showed electrostatic stability in accordance with the zeta potential value. We found that the formulation based on lignin: extract (1:1 ratio) and gelatin: lignin: extract (0.5:0.5:1 ratio) demonstrated photoprotection qualities with a sun protection factor (SPF) ranging from 9.4 to 22.6. In addition, all the hybrid NP-formulations were time-stable with %SPFeff and %UVAPFeff greater than 80% after exposure to 2 h of radiation. These results suggest that the hybrid biopolymer-natural extract improved the photoprotection and photostability properties, as well as the antiradical capacity, of the B. antioquensis extract, and may be useful for trapping high polyphenol content from natural extracts, with potential application in cosmeceutical formulations.

Microencapsulation of Photochromic Solution with Polyurea by Interfacial Polymerization

Photochromic materials are interesting materials because of their color-changing property under UV light and visible light irradiation. However, they are vulnerable to many factors, such as pH oxygen, ion, solvent, etc. because of the unsaturated bonds existing on the photochromic molecular. Microencapsulation of the photochromic materials can separate them from the surroundings. Here, photochromic microcapsules using 3,3-Diphenyl-3H-naphtho[2,1-b] pyran (NP)/solution as core and polyurea as shell via interfacial polymerization were prepared, and bis(2,2,6,6-tetramethyl-4-piperidinyl)sebacate (HALS 770) was used as photostabilizer. Fourier transform infrared spectroscopy (FTIR), a laser particle size analyzer, a scanning electron microscope (SEM), a thermogravimetric analyzer and an ultraviolet-visible spectrophotometer were used for characterization. The results showed that the microcapsules had a uniform particle size of about 0.56 μm when the percentage of the oil phase (core) in the emulsion was less than 15%, the addition amount of the emulsifier was 0.4%, and the stirring rate was 1800 r/min. The microcapsules showed better performance in thermal stability when the core/shell ratio was 1:1. The photostabilizer had little impact on the color-changing property of the microcapsule, but it could protect the microcapsules from UV light radiation aging.