1
|
Su CY, Li D, Wang LJ, Wang Y. Eco-friendly electronic food labels: Development and application of Ion-SSPB double network hydrogel. J Colloid Interface Sci 2024; 671:154-164. [PMID: 38797141 DOI: 10.1016/j.jcis.2024.05.173] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/23/2024] [Revised: 05/18/2024] [Accepted: 05/22/2024] [Indexed: 05/29/2024]
Abstract
Although various conductive hydrogels have been developed for sensing, ideal materials for meeting the safety and toughness requirements of food detection are still lacking. This study introduces Ion-SSPB, a conductive hydrogel fabricated from eco-friendly, food-grade materials such as corn starch (CS), sodium alginate (SA), polyvinyl alcohol (PVA) and bentonite (BT). It leverages a green manufacturing approach designed for application in electronic food sensors. The hydrogel is achieved through a double network strategy and salt immersion method, which endows it with tunable mechanical and rheological properties. A key innovation of Ion-SSPB is the incorporation of bentonite, which enhances its performance, including low swelling, freezing resistance, and minimal residual adhesion. The hydrogel with 4% (w/v) BT concentration (Ion-SSPB4%) is an effective medium for detecting impedance changes in mangoes, correlating with their ripening stages. The Ion-SSPB hydrogel represents a significant advancement in the field of electronic food labels, combining environmental sustainability with technical efficacy.
Collapse
Affiliation(s)
- Chun-Yan Su
- College of Engineering, Beijing Advanced Innovation Center for Food Nutrition and Human Health, National Energy R & D Center for Non-food Biomass, China Agricultural University, P. O. Box 50 17 Qinghua Donglu Beijing, China
| | - Dong Li
- College of Engineering, Beijing Advanced Innovation Center for Food Nutrition and Human Health, National Energy R & D Center for Non-food Biomass, China Agricultural University, P. O. Box 50 17 Qinghua Donglu Beijing, China.
| | - Li-Jun Wang
- College of Food Science and Nutritional Engineering, Beijing Key Laboratory of Functional Food from Plant Resources, China Agricultural University, Beijing 100083, China.
| | - Yong Wang
- School of Chemical Engineering, University of New South Wales, Kensington, New South Wales, Australia
| |
Collapse
|
2
|
Zhao X, Yang M, Shi Y, Sun L, Zheng H, Wu M, Gao G, Ma T, Li G. Multifunctional bacterial cellulose-bentonite@polyethylenimine composite membranes for enhanced water treatment: Sustainable dyes and metal ions adsorption and antibacterial properties. JOURNAL OF HAZARDOUS MATERIALS 2024; 477:135267. [PMID: 39047552 DOI: 10.1016/j.jhazmat.2024.135267] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/25/2024] [Revised: 07/10/2024] [Accepted: 07/18/2024] [Indexed: 07/27/2024]
Abstract
Developing multifunctional materials for water treatment remains a significant challenge. Bacterial cellulose (BC) holds immense potential as an adsorbent with high pollutant-binding capacity, hydrophilicity, and biosafety. In this study, N-acetylglucosamine was used as a carbon source to ferment BC, incorporating amide bonds in situ. Bentonite, renowned for its adsorption properties, was added to the culture medium, resulting in BC-bentonite composite membranes via a one-step fermentation process. Polyethyleneimine (PEI) was crosslinked with amide bonds on the membrane via glutaraldehyde through Schiff base reactions to enhance the performance of the composite membrane. The obtained membrane exhibited increased hydrophilicity, enhanced active adsorption sites, and enlarged specific surface area. It not only physically adsorbed contaminants through its unique structure but also effectively captured dye molecules (Congo red, Methylene blue, Malachite green) via electrostatic interactions. Additionally, it formed stable complexes with metal ions (Cd²⁺, Pb²⁺, Cu²⁺) through coordination and effectively adsorbed their mixtures. Moreover, the composite membrane demonstrated the broad-spectrum antibacterial activity, effectively inhibiting the growth of tested bacteria. This study introduces an innovative method for fabricating composite membranes as adsorbents for complex water pollutants, showing significant potential for long-term wastewater treatment of organic dyes, heavy metal ions, and pathogens.
Collapse
Affiliation(s)
- Xueqing Zhao
- Key Laboratory of Molecular Microbiology and Technology, Ministry of Education, College of Life Sciences, Nankai University, Tianjin 300071, China
| | - Mingbo Yang
- Key Laboratory of Molecular Microbiology and Technology, Ministry of Education, College of Life Sciences, Nankai University, Tianjin 300071, China
| | - Yucheng Shi
- Key Laboratory of Molecular Microbiology and Technology, Ministry of Education, College of Life Sciences, Nankai University, Tianjin 300071, China
| | - Liyuan Sun
- Key Laboratory of Molecular Microbiology and Technology, Ministry of Education, College of Life Sciences, Nankai University, Tianjin 300071, China
| | - Haolong Zheng
- Key Laboratory of Molecular Microbiology and Technology, Ministry of Education, College of Life Sciences, Nankai University, Tianjin 300071, China
| | - Mengmeng Wu
- Key Laboratory of Molecular Microbiology and Technology, Ministry of Education, College of Life Sciences, Nankai University, Tianjin 300071, China
| | - Ge Gao
- Key Laboratory of Molecular Microbiology and Technology, Ministry of Education, College of Life Sciences, Nankai University, Tianjin 300071, China.
| | - Ting Ma
- Key Laboratory of Molecular Microbiology and Technology, Ministry of Education, College of Life Sciences, Nankai University, Tianjin 300071, China; Tianjin Engineering Technology Center of Green Manufacturing Biobased Materials, Tianjin 300071, China.
| | - Guoqiang Li
- Key Laboratory of Molecular Microbiology and Technology, Ministry of Education, College of Life Sciences, Nankai University, Tianjin 300071, China; Tianjin Engineering Technology Center of Green Manufacturing Biobased Materials, Tianjin 300071, China.
| |
Collapse
|
3
|
Dong Y, Abbasi A, Mohammadnejad S, Nasrollahzadeh M, Sheibani R, Otadi M. Recent progresses in bentonite/lignin or polysaccharide composites for sustainable water treatment. Int J Biol Macromol 2024; 278:134747. [PMID: 39151844 DOI: 10.1016/j.ijbiomac.2024.134747] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/23/2023] [Revised: 07/19/2024] [Accepted: 08/12/2024] [Indexed: 08/19/2024]
Abstract
Today, with the growth of the human population, industrial activities have also increased. Different industries such as painting, cosmetics, leather, etc. have broadly developed, and as a result, they also produce a lot of pollutants. These pollutants can enter the environment and pollute water, air, and soil. Organic dyes, nitro compounds, drug residues, pesticides and herbicides are pollutants that should be removed from the environment. Natural polymers or biopolymers are important types of organic materials that are broadly applied for different applications. Among them, polysaccharides and lignin, which are two types of biopolymers, have attracted much consideration owing to their advantages such as biocompatibility, environmental friendly, safety, availability, etc. Polysaccharides include cellulose, gum, starch, alginate (Alg), chitin, and chitosan (CS). On the other hand, bentonite is one of the types of clays, which owing to their properties like large specific surface area, adsorption performance, naturally available, etc., have drawn the interest of many researchers. As a result, the synthesis of a composite including polysaccharide/lignin and bentonite can be very efficient for different applications, especially environmental ones. In this review, we instigated the preparation of these composites as well as the removal performance of them. In fact, we reported recent advancements in the synthesis of lignin- and polysaccharide-bentonite composites for the removal of diverse kinds of contaminants like organic dyes, nitro compounds, and hazardous materials.
Collapse
Affiliation(s)
- Yahao Dong
- Henan Key Laboratory of Green Chemistry, Collaborative Innovation Center of Henan Province for Green Manufacturing of Fine Chemicals, Henan Engineering Laboratory of Chemical Pharmaceutical and Biomedical Materials, Key Laboratory of Green Chemical Media and Reactions, Ministry of Education, School of Chemistry and Chemical Engineering, Henan Normal University, Xinxiang 453007, PR China
| | - Azadeh Abbasi
- Department of Chemistry, Faculty of Science, University of Qom, Qom 3716146611, Iran
| | - Sepideh Mohammadnejad
- Department of Chemical Engineering, Central Tehran Branch, Islamic Azad University, Iran
| | | | - Reza Sheibani
- Amirkabir University of Technology-Mahshahr Campus, University St., Nahiyeh san'ati, Mahshahr, Khouzestan, Iran
| | - Maryam Otadi
- Department of Chemical Engineering, Central Tehran Branch, Islamic Azad University, Iran
| |
Collapse
|
4
|
Patra P, Upadhyay TK, Alshammari N, Saeed M, Kesari KK. Alginate-Chitosan Biodegradable and Biocompatible Based Hydrogel for Breast Cancer Immunotherapy and Diagnosis: A Comprehensive Review. ACS APPLIED BIO MATERIALS 2024; 7:3515-3534. [PMID: 38787337 PMCID: PMC11190989 DOI: 10.1021/acsabm.3c00984] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/22/2023] [Revised: 12/21/2023] [Accepted: 12/21/2023] [Indexed: 05/25/2024]
Abstract
Breast cancer is the most common type of cancer and the second leading cause of cancer-related mortality in females. There are many side effects due to chemotherapy and traditional surgery, like fatigue, loss of appetite, skin irritation, and drug resistance to cancer cells. Immunotherapy has become a hopeful approach toward cancer treatment, generating long-lasting immune responses in malignant tumor patients. Recently, hydrogel has received more attention toward cancer therapy due to its specific characteristics, such as decreased toxicity, fewer side effects, and better biocompatibility drug delivery to the particular tumor location. Researchers globally reported various investigations on hydrogel research for tumor diagnosis. The hydrogel-based multilayer platform with controlled nanostructure has received more attention for its antitumor effect. Chitosan and alginate play a leading role in the formation of the cross-link in a hydrogel. Also, they help in the stability of the hydrogel. This review discusses the properties, preparation, biocompatibility, and bioavailability of various research and clinical approaches of the multipolymer hydrogel made of alginate and chitosan for breast cancer treatment. With a focus on cases of breast cancer and the recovery rate, there is a need to find out the role of hydrogel in drug delivery for breast cancer treatment.
Collapse
Affiliation(s)
- Pratikshya Patra
- Department
of Biotechnology, Parul Institute of Applied Sciences and Animal Cell
Culture and Immunobiochemistry Lab, Research and Development Cell, Parul University, Vadodara, Gujarat 391760, India
| | - Tarun Kumar Upadhyay
- Department
of Biotechnology, Parul Institute of Applied Sciences and Animal Cell
Culture and Immunobiochemistry Lab, Research and Development Cell, Parul University, Vadodara, Gujarat 391760, India
| | - Nawaf Alshammari
- Department
of Biology, College of Science, University
of Hail, Hail 53962, Saudi Arabia
| | - Mohd Saeed
- Department
of Biology, College of Science, University
of Hail, Hail 53962, Saudi Arabia
| | - Kavindra Kumar Kesari
- Department
of Applied Physics, School of Science, Aalto
University, Espoo FI-00076, Finland
- Centre
of Research Impact and Outcome, Chitkara
University, Rajpura 140417, Punjab, India
| |
Collapse
|
5
|
Çevik TN, Kivilcimdan Moral Ç. Zinc oxide nanoparticles encapsulated in alginate beads: a promising and recyclable adsorbent for simultaneous uptake of toxic metals. NANOTECHNOLOGY 2024; 35:345701. [PMID: 38776881 DOI: 10.1088/1361-6528/ad4ee9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/18/2024] [Accepted: 05/22/2024] [Indexed: 05/25/2024]
Abstract
Heavy metal toxicity is a known problem and various methods are used for treatment. Adsorption has some advantages and it would be promising if environmentally friendly and cheap materials were utilized. Alginate and zinc oxide nanoparticles were selected and composite alginate beads were used for the removal of mixed metals from aqueous solutions. Batch and column experiments were conducted to determine some parameters' effects and the adsorbent's real application potential. According to the batch experiments, zinc oxide nanoparticles to alginate ratio of 0.5 g g-1, and pH levels nearby to the neutral range led to better metal removals. 0.5 ml min-1of flow rate supplied better metal removal efficiencies in columns, with the highest treatment as 86% of Pb2+. Acid treatment can be successfully applied for the regeneration of the adsorbent, at least three times only with a 4% reduction in the adsorption efficiency. Heavy metal uptake was compatible with the pseudo 2nd order model indicating chemisorption as a dominant mechanism. Also, the intraparticle diffusion model illustrated adsorption might govern more than one step. The Langmuir model had the best fit and suggested monolayer covering for Pb2+, 76.3 mg g-1. Alginate-based nanocomposite beads were useful for mixed metal removal and could be used.
Collapse
Affiliation(s)
- Tuğba Nur Çevik
- Department of Environmental Engineering, Akdeniz University, 07058 Antalya, Turkey
| | | |
Collapse
|
6
|
Chelu M, Musuc AM, Popa M, Calderon Moreno JM. Chitosan Hydrogels for Water Purification Applications. Gels 2023; 9:664. [PMID: 37623119 PMCID: PMC10453846 DOI: 10.3390/gels9080664] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/24/2023] [Revised: 08/14/2023] [Accepted: 08/15/2023] [Indexed: 08/26/2023] Open
Abstract
Chitosan-based hydrogels have gained significant attention for their potential applications in water treatment and purification due to their remarkable properties such as bioavailability, biocompatibility, biodegradability, environmental friendliness, high pollutants adsorption capacity, and water adsorption capacity. This article comprehensively reviews recent advances in chitosan-based hydrogel materials for water purification applications. The synthesis methods, structural properties, and water purification performance of chitosan-based hydrogels are critically analyzed. The incorporation of various nanomaterials into chitosan-based hydrogels, such as nanoparticles, graphene, and metal-organic frameworks, has been explored to enhance their performance. The mechanisms of water purification, including adsorption, filtration, and antimicrobial activity, are also discussed in detail. The potential of chitosan-based hydrogels for the removal of pollutants, such as heavy metals, organic contaminants, and microorganisms, from water sources is highlighted. Moreover, the challenges and future perspectives of chitosan-based hydrogels in water treatment and water purification applications are also illustrated. Overall, this article provides valuable insights into the current state of the art regarding chitosan-based hydrogels for water purification applications and highlights their potential for addressing global water pollution challenges.
Collapse
Affiliation(s)
| | - Adina Magdalena Musuc
- “Ilie Murgulescu” Institute of Physical Chemistry, 202 Spl. Independentei, 060021 Bucharest, Romania; (M.C.); (M.P.)
| | | | - Jose M. Calderon Moreno
- “Ilie Murgulescu” Institute of Physical Chemistry, 202 Spl. Independentei, 060021 Bucharest, Romania; (M.C.); (M.P.)
| |
Collapse
|
7
|
Ahmaruzzaman M, Roy P, Bonilla-Petriciolet A, Badawi M, Ganachari SV, Shetti NP, Aminabhavi TM. Polymeric hydrogels-based materials for wastewater treatment. CHEMOSPHERE 2023; 331:138743. [PMID: 37105310 DOI: 10.1016/j.chemosphere.2023.138743] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/17/2023] [Revised: 04/18/2023] [Accepted: 04/19/2023] [Indexed: 05/19/2023]
Abstract
Low-cost and reliable wastewater treatment is a relevant issue worldwide to reduce the concentration of environmental pollutants. Industrial effluents containing dyes, heavy metals, and other inorganic and organic compounds can pollute water resources; therefore, novel technologies are required to mitigate and control their release into the environment. Adsorption is one of the simplest methods for treating contaminated water in which a wide spectrum of adsorbents can be used to remove emerging compounds. Hydrogels are interesting materials with high adsorption capacities that can be synthesized via green routes. These adsorbents are promising for large-scale industrial wastewater treatment applications; however, gaps still exist in achieving sustainable commercial implementation. This review focuses on the discussion and analysis of preparation, characterization, and adsorption properties of hydrogels for water purification. The advantages of these polymeric materials for water treatment were analyzed, including their performance in the removal of different organic and inorganic contaminants. Recent advances in the functionalization of hydrogels and the synthesis of novel composites have also been described. The adsorption capacities of hydrogel-based adsorbents are higher than 500 mg/g for different organic and inorganic pollutants, and can reach values of up to >2000 mg/g for organic compounds, significantly outperforming other materials reported for water cleaning. The main interactions involved in the adsorption of water pollutants using hydrogel-based adsorbents were described and explained to allow the interpretation of their removal mechanisms. The current challenges in the implementation of hydrogels for water purification in real-life operations are also highlighted. This review provides an updated picture of hydrogels as interesting materials to address water depollution worldwide.
Collapse
Affiliation(s)
- Md Ahmaruzzaman
- Department of Chemistry, National Institute of Technology Silchar, 788010, Assam, India.
| | - Prerona Roy
- Department of Chemistry, National Institute of Technology Silchar, 788010, Assam, India
| | | | - Michael Badawi
- Laboratoire de Physique et Chimie Théoriques UMR CNRS 7019, Université de Lorraine, Nancy, France
| | - Sharanabasava V Ganachari
- Center for Energy and Environment, School of Advanced Sciences, KLE Technological University, Hubballi, 580 031, India
| | - Nagaraj P Shetti
- Center for Energy and Environment, School of Advanced Sciences, KLE Technological University, Hubballi, 580 031, India
| | - Tejraj M Aminabhavi
- Center for Energy and Environment, School of Advanced Sciences, KLE Technological University, Hubballi, 580 031, India.
| |
Collapse
|
8
|
Sen TK. Agricultural Solid Wastes Based Adsorbent Materials in the Remediation of Heavy Metal Ions from Water and Wastewater by Adsorption: A Review. Molecules 2023; 28:5575. [PMID: 37513447 PMCID: PMC10386015 DOI: 10.3390/molecules28145575] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/05/2023] [Revised: 07/02/2023] [Accepted: 07/12/2023] [Indexed: 07/30/2023] Open
Abstract
Adsorption has become the most popular and effective separation technique that is used across the water and wastewater treatment industries. However, the present research direction is focused on the development of various solid waste-based adsorbents as an alternative to costly commercial activated carbon adsorbents, which make the adsorptive separation process more effective, and on popularising the sustainable options for the remediation of pollutants. Therefore, there are a large number of reported results available on the application of raw or treated agricultural biomass-based alternatives as effective adsorbents for aqueous-phase heavy metal ion removal in batch adsorption studies. The goal of this review article was to provide a comprehensive compilation of scattered literature information and an up-to-date overview of the development of the current state of knowledge, based on various batch adsorption research papers that utilised a wide range of raw, modified, and treated agricultural solid waste biomass-based adsorbents for the adsorptive removal of aqueous-phase heavy metal ions. Metal ion pollution and its source, toxicity effects, and treatment technologies, mainly via adsorption, have been reviewed here in detail. Emphasis has been placed on the removal of heavy metal ions using a wide range of agricultural by-product-based adsorbents under various physicochemical process conditions. Information available in the literature on various important influential physicochemical process parameters, such as the metal concentration, agricultural solid waste adsorbent dose, solution pH, and solution temperature, and importantly, the adsorbent characteristics of metal ion removal, have been reviewed and critically analysed here. Finally, from the literature reviewed, future perspectives and conclusions were presented, and a few future research directions have been proposed.
Collapse
Affiliation(s)
- Tushar Kanti Sen
- Chemical Engineering Department, College of Engineering, King Faisal University, P.O. Box 380, Al-Ahsa 31982, Saudi Arabia
| |
Collapse
|
9
|
Yin X, Ke T, Zhu H, Xu P, Wang H. Efficient Removal of Heavy Metals from Aqueous Solution Using Licorice Residue-Based Hydrogel Adsorbent. Gels 2023; 9:559. [PMID: 37504438 PMCID: PMC10379308 DOI: 10.3390/gels9070559] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2023] [Revised: 07/05/2023] [Accepted: 07/06/2023] [Indexed: 07/29/2023] Open
Abstract
The removal of heavy metals through adsorption represents a highly promising method. This study focuses on the utilization of an abundant cellulose-rich solid waste, licorice residue (LR), as a natural material for hydrogel synthesis. To this end, LR-EPI hydrogels, namely, LR-EPI-5, LR-EPI-6 and LR-EPI-8, were developed by crosslinking LR with epichlorohydrin (EPI), specifically targeting the removal of Pb, Cu, and Cr from aqueous solutions. Thorough characterizations employing Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy confirmed the successful crosslinking of LR-EPIs by EPI, resulting in the formation of porous and loosely structured hydrogels. Batch studies demonstrated the high efficacy of LR-EPI hydrogels in removing the three heavy metal ions from aqueous solutions. Notably, LR-EPI-8 exhibited the highest adsorption capacity, with maximum capacities of 591.8 mg/g, 458.3 mg/g, and 121.4 mg/g for Pb2+, Cr3+, and Cu2+, respectively. The adsorption processes for Pb2+ and Cu2+ were well described by pseudo-second-order kinetics and the Langmuir model. The adsorption mechanism of LR-EPI-8 onto heavy metal ions was found to involve a combination of ion-exchange and electrostatic interactions, as inferred from the results obtained through X-ray photoelectron spectroscopy and FTIR. This research establishes LR-EPI-8 as a promising adsorbent for the effective removal of heavy metal ions from aqueous solutions, offering an eco-friendly approach for heavy metal removal and providing an environmentally sustainable method for the reutilization of Chinese herb residues. It contributes to the goal of "from waste, treats waste" while also addressing the broader need for heavy metal remediation.
Collapse
Affiliation(s)
- Xiaochun Yin
- Department of Civil Engineering, New Mexico State University, Las Cruces, NM 88003, USA
- School of Public Health, Gansu University of Chinese Medicine, Lanzhou 730000, China
| | - Ting Ke
- School of Public Health, Gansu University of Chinese Medicine, Lanzhou 730000, China
| | - Hai Zhu
- School of Public Health, Gansu University of Chinese Medicine, Lanzhou 730000, China
| | - Pei Xu
- Department of Civil Engineering, New Mexico State University, Las Cruces, NM 88003, USA
| | - Huiyao Wang
- Department of Civil Engineering, New Mexico State University, Las Cruces, NM 88003, USA
| |
Collapse
|
10
|
Hu C, Zheng Z, Huang M, Yang F, Wu X, Zhang A. Adsorption Characterization of Cu(II) and Cd(II) by a Magnetite-Chitosan Composite: Kinetic, Thermodynamic and Equilibrium Studies. Polymers (Basel) 2023; 15:2710. [PMID: 37376356 DOI: 10.3390/polym15122710] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2023] [Revised: 06/11/2023] [Accepted: 06/14/2023] [Indexed: 06/29/2023] Open
Abstract
Optimizing the use of magnetite-chitosan composites for heavy metal adsorption has been of great interest due to their environmental friendliness. To gain insights into their potential with green synthesis, this study analyzed one of these composites through X-ray diffraction, Fourier-transform infrared spectroscopy and scanning electron microscopy. Adsorption properties were then explored via static experiments to evaluate the pH dependence, isotherms, kinetics, thermodynamics and regeneration adsorption of Cu(II) and Cd(II). Results disclosed that the optimum pH of adsorption was 5.0, the equilibrium time was about 10 min, and the capacity for Cu(II) and Cd(II) reached 26.28 and 18.67 mg/g, respectively. The adsorption amount of cations increased with temperature from 25 °C to 35 °C and decreased with further increase in temperature from 40 °C to 50 °C, which might be related to the unfolding of chitosan; the adsorption capacity was above 80% of the initial value after two regenerations and about 60% after five regenerations. The composite has a relatively rough outer surface, but its inner surface and porosity are not obvious; it has functional groups of magnetite and chitosan, and chitosan might dominate the adsorption. Consequently, this research proposes the value of maintaining green synthesis research to further optimize the composite system of heavy metal adsorption.
Collapse
Affiliation(s)
- Chao Hu
- Hubei Province Research Center of Engineering Technology for Utilization of Botanical Functional Ingredients, Hubei Engineering University, Xiaogan 432000, China
- College of Life Science and Technology, Hubei Engineering University, Xiaogan 432000, China
| | - Zuhong Zheng
- Hubei Province Research Center of Engineering Technology for Utilization of Botanical Functional Ingredients, Hubei Engineering University, Xiaogan 432000, China
- College of Life Science and Technology, Hubei Engineering University, Xiaogan 432000, China
| | - Mengyao Huang
- College of Life Science and Technology, Hubei Engineering University, Xiaogan 432000, China
| | - Fan Yang
- College of Life Science and Technology, Hubei Engineering University, Xiaogan 432000, China
| | - Xuewei Wu
- College of Life Science and Technology, Hubei Engineering University, Xiaogan 432000, China
| | - Aiqun Zhang
- College of Life Science and Technology, Hubei Engineering University, Xiaogan 432000, China
| |
Collapse
|
11
|
Bouaziz N, Kouira O, Aouaini F, Bukhari L, Knani S, Znaidia S, Lamine AB. Adsorption of antibiotics by bentonite-chitosan composite: Phenomenological modeling and physical investigation of the adsorption process. Int J Biol Macromol 2023:125156. [PMID: 37270136 DOI: 10.1016/j.ijbiomac.2023.125156] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/26/2023] [Revised: 05/18/2023] [Accepted: 05/28/2023] [Indexed: 06/05/2023]
Abstract
The increased use of antibiotics worldwide turned into a serious preoccupation due to their environmental and health impacts. Since the majority of antibiotic residuals are hardly eliminated from wastewater, based on usual methods, other treatments receive considerable attention. Adsorption is known as the most effective method of the treatment of antibiotics. In this paper, the adsorption isotherms of doripenem, ampicillin, and amoxicillin on bentonite-chitosan composite are determined at three temperatures, T = 303.15, 313.15 and 323.15 K, which are used to achieve a theoretical investigation of the removal phenomenon, based on a statistical physics theory. Three analytical models are utilized to describe the AMO, AMP, and DOR adsorption phenomena at the molecular level. From the fitting results, all antibiotic adsorption on a BC adsorbent is associated with the monolayer formation with one type of site. Concerning the number of adsorbed molecules per site (n), it is concluded that multi-docking (n < 1) and multi-molecular (n > 1) phenomena are feasible for AMO, AMP, and DOR adsorption on BC. The adsorption amounts at saturation of the BC adsorbent, deduced by the monolayer model, are found to be 70.4-88.0 mg/g for doripenem, 57.8-79.2 mg/g for ampicillin and 38.6-67.5 mg/g for amoxicillin indicating that the antibiotics adsorption performance of BC was greatly depended on temperature where the adsorption capacities increased with the increment of this operating variable. All adsorption systems are demonstrated by a calculation of the energy of adsorption, considering that the extrication of these pollutants implies physical interactions. The thermodynamic interpretation confirms the spontaneous and feasible nature of the adsorption of the three antibiotics on BC adsorbent. In brief, BC sample is regarded as a promising adsorbent to extract antibiotics from water and presents important potentials to be effected in wastewater handling at industrial level.
Collapse
Affiliation(s)
- Nadia Bouaziz
- Laboratory of Quantum and Statistical Physics LR 18 ES 18, Faculty of Sciences of Monastir, Environnement Street, 5019 Monastir, Tunisia.
| | - Oumayma Kouira
- Laboratory of Quantum and Statistical Physics LR 18 ES 18, Faculty of Sciences of Monastir, Environnement Street, 5019 Monastir, Tunisia
| | - Fatma Aouaini
- Department of Physics, College of Science, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh 11671, Saudi Arabia
| | - Lamies Bukhari
- Department of Physics, College of Science, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh 11671, Saudi Arabia
| | - Salah Knani
- Department of Physics, College of Science, Northern Border University, Arar, Saudi Arabia.
| | - Sami Znaidia
- College of Sciences and Arts in Mahayel Asir, Department of Physics, King Khalid University, Abha, Saudi Arabia
| | - Abdelmottaleb Ben Lamine
- Laboratory of Quantum and Statistical Physics LR 18 ES 18, Faculty of Sciences of Monastir, Environnement Street, 5019 Monastir, Tunisia
| |
Collapse
|
12
|
Tang J, Wang L, Qin W, Qing Z, Du C, Xiao S, Yan B. High reusability and adsorption capacity of acid washed calcium alginate/chitosan composite hydrogel spheres in the removal of norfloxacin. CHEMOSPHERE 2023:139048. [PMID: 37245593 DOI: 10.1016/j.chemosphere.2023.139048] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/11/2023] [Revised: 05/23/2023] [Accepted: 05/25/2023] [Indexed: 05/30/2023]
Abstract
Calcium alginate (CA) hydrogel spheres were widely used as adsorbents to remove organics, but their adsorption capacities and reusability to some antibiotics are unsatisfactory. In this study, calcium alginate/chitosan (CA/CTS) hydrogel spheres were prepared as precursors. Acid-washed CA/CTS (CA/CTS-M) hydrogel spheres (310.6 mg/g) behaved much better adsorption capacity of norfloxacin (NOR) than CA (69.5 mg/g) and CA/CTS (87.7 mg/g) hydrogel spheres. Astonishingly, after being reused for 15 cycles, CA/CTS-M has no loss of NOR adsorption capacity. In the original idea, acid wash was expected to remove the chitosan in CA/CTS hydrogel spheres for obtaining a larger specific surface area. Both scanning electron microscopy and Brunauer-Emmett-Teller test showed that acid wash can remove CTS from CA/CTS hydrogel spheres to increase the specific surface area. However, part of the chitosan remained in CA/CTS-M, having a role to enhance the structural stability of the material, because the acid-washed CA (about 2 mm) has a significantly smaller diameter than CA/CTS-M (about 3 mm). According to the influence of pH and density functional theory calculations, electrostatic attraction is the key driving force of NOR adsorption. Importantly, acid wash led to more negative-charged surface characterized by Zeta potential, which is the main reason of the significantly enhanced adsorption capacity of CA/CTS-M in removal of NOR. In short, CA/CTS-M hydrogel spheres are environment friendly and highly stable adsorbents with high adsorption capacity in the removal of NOR.
Collapse
Affiliation(s)
- Jia Tang
- State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing, 100012, China; College of Geosciences and Environmental Engineering, Southwest Jiaotong University, Chengdu, 611756, China
| | - Liangjie Wang
- State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing, 100012, China; College of Chemical and Environmental Engineering, Shenzhen University, Shenzhen, 518060, China
| | - Weiwei Qin
- College of Geosciences and Environmental Engineering, Southwest Jiaotong University, Chengdu, 611756, China
| | - Zhuolin Qing
- State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing, 100012, China; College of Geosciences and Environmental Engineering, Southwest Jiaotong University, Chengdu, 611756, China
| | - Cong Du
- State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing, 100012, China
| | - Shuhu Xiao
- State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing, 100012, China.
| | - Bingfei Yan
- State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing, 100012, China; College of Water Sciences, Beijing Normal University, Beijing, 100875, China.
| |
Collapse
|
13
|
Yang L, Bao L, Dong T, Xie H, Wang X, Wang H, Wu J, Hao C. Adsorption properties of cellulose/guar gum/biochar composite hydrogel for Cu 2+, Co 2+ and methylene blue. Int J Biol Macromol 2023:125021. [PMID: 37244343 DOI: 10.1016/j.ijbiomac.2023.125021] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/22/2022] [Revised: 05/10/2023] [Accepted: 05/19/2023] [Indexed: 05/29/2023]
Abstract
Herein, Typha angustifolia was used as a charcoal source and chemically modified with a strong oxidizing agent, potassium permanganate (KMnO4), to obtain modified Typha angustifolia (MTC). Then, the green, stable and efficient CMC/GG/MTC composite hydrogel was successfully prepared by compounding MTC with carboxymethyl cellulose (CMC) and guar gum (GG) by free radical polymerization. Various variables that influence adsorption performance were explored, and optimal adsorption conditions were determined. The maximum adsorption capacity calculated from the Langmuir isotherm model was 805.45, 772.52, and 598.28 mg g-1 for Cu2+, Co2+, and methylene blue (MB), respectively. The XPS results revealed that the main mechanism of removing pollutants by adsorbent is surface complexation and electrostatic attraction. After five adsorption-desorption cycles, the CMC/GG/MTC adsorbent still exhibited good adsorption and regeneration capacity. This study provides a low-cost, effective and simple method for preparation of hydrogels from modified biochar, which has excellent application potential in the removal of heavy metal ions and organic cationic dye contaminants from wastewater.
Collapse
Affiliation(s)
- Lingze Yang
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China
| | - Lei Bao
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China
| | - Tong Dong
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China
| | - Honghao Xie
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China
| | - Xiaohong Wang
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China.
| | - Huili Wang
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China
| | - Jingbo Wu
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China
| | - Chen Hao
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China.
| |
Collapse
|
14
|
Zhang W, Xu Y, Mu X, Li S, Liu X, Lei Z. Research Progress of Polysaccharide-Based Natural Polymer Hydrogels in Water Purification. Gels 2023; 9:gels9030249. [PMID: 36975698 PMCID: PMC10048097 DOI: 10.3390/gels9030249] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2023] [Revised: 03/13/2023] [Accepted: 03/17/2023] [Indexed: 03/29/2023] Open
Abstract
The pollution and scarcity of freshwater resources are global problems that have a significant influence on human life. It is very important to remove harmful substances in the water to realize the recycling of water resources. Hydrogels have recently attracted attention due to their special three-dimensional network structure, large surface area, and pores, which show great potential for the removal of pollutants in water. In their preparation, natural polymers are one of the preferred materials because of their wide availability, low cost, and easy thermal degradation. However, when it is directly used for adsorption, its performance is unsatisfactory, so it usually needs to be modified in the preparation process. This paper reviews the modification and adsorption properties of polysaccharide-based natural polymer hydrogels, such as cellulose, chitosan, starch, and sodium alginate, and discusses the effects of their types and structures on performance and recent technological advances.
Collapse
Affiliation(s)
- Wenxu Zhang
- Key Laboratory of Eco-Functional Polymer Materials of the Ministry of Education, Northwest Normal University, Lanzhou 730070, China
- College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China
- Key Laboratory of Eco-Environmental Polymer Materials of Gansu Province, Northwest Normal University, Lanzhou 730070, China
| | - Yan Xu
- Key Laboratory of Eco-Functional Polymer Materials of the Ministry of Education, Northwest Normal University, Lanzhou 730070, China
- College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China
- Key Laboratory of Eco-Environmental Polymer Materials of Gansu Province, Northwest Normal University, Lanzhou 730070, China
| | - Xuyang Mu
- Key Laboratory of Eco-Functional Polymer Materials of the Ministry of Education, Northwest Normal University, Lanzhou 730070, China
- College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China
- Key Laboratory of Eco-Environmental Polymer Materials of Gansu Province, Northwest Normal University, Lanzhou 730070, China
| | - Sijie Li
- Key Laboratory of Eco-Functional Polymer Materials of the Ministry of Education, Northwest Normal University, Lanzhou 730070, China
- College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China
- Key Laboratory of Eco-Environmental Polymer Materials of Gansu Province, Northwest Normal University, Lanzhou 730070, China
| | - Xiaoming Liu
- Key Laboratory of Eco-Functional Polymer Materials of the Ministry of Education, Northwest Normal University, Lanzhou 730070, China
- College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China
- Key Laboratory of Eco-Environmental Polymer Materials of Gansu Province, Northwest Normal University, Lanzhou 730070, China
| | - Ziqiang Lei
- Key Laboratory of Eco-Functional Polymer Materials of the Ministry of Education, Northwest Normal University, Lanzhou 730070, China
- College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China
- Key Laboratory of Eco-Environmental Polymer Materials of Gansu Province, Northwest Normal University, Lanzhou 730070, China
| |
Collapse
|
15
|
Recent Application Prospects of Chitosan Based Composites for the Metal Contaminants Wastewater Treatment. Polymers (Basel) 2023; 15:polym15061453. [PMID: 36987232 PMCID: PMC10057141 DOI: 10.3390/polym15061453] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2023] [Revised: 03/06/2023] [Accepted: 03/12/2023] [Indexed: 03/17/2023] Open
Abstract
Heavy metals, known for their toxic nature and ability to accumulate and magnify in the food chain, are a major environmental concern. The use of environmentally friendly adsorbents, such as chitosan (CS)—a biodegradable cationic polysaccharide, has gained attention for removing heavy metals from water. This review discusses the physicochemical properties of CS and its composites and nanocomposites and their potential application in wastewater treatment.
Collapse
|
16
|
Gao X, Huang X, Lin J, Yu C, Tang C, Huang Y. Porous boron nitride nanofibers enhanced sodium acrylate and acrylamide copolymer hydrogels for effective adsorption of Pb 2. SOFT MATTER 2023; 19:973-982. [PMID: 36636922 DOI: 10.1039/d2sm01341j] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
A new composite hydrogel adsorbent for adsorption of Pb2+ has been prepared by combining porous boron nitride nanofibers (BNNFs) and the acrylamide and sodium acrylate copolymer (P(AANa-co-AM)) via a chemical crosslinking method. Porous BNNFs with abundant hydroxyl functional groups can form hydrogen bond interactions with carboxyl and amino functional groups of the copolymer in the composite hydrogel and carry and dissipate forces for the composite hydrogels. So the mechanical performances of the copolymer hydrogels can be effectively improved, which is very valuable for the practical application of the composite hydrogel to remove Pb2+ from waste water. The thermal stability and swelling performance of the pure copolymer hydrogels were also greatly improved. This is not only because of the strong hydrogen bond interactions but also the good thermal stability and flexibility of BNNFs. The composite hydrogel adsorbent shows superior adsorption capacity for Pb2+ (490.2 mg g-1) to most of the reported hydrogel adsorbents. The chemisorption dominates the whole adsorption process according to the pseudo-second-order kinetic and the Langmuir models. The composite hydrogel adsorbent also shows good reusability. Therefore, we believe that the prepared composite hydrogels will play an important role in removing Pb2+ from wastewater.
Collapse
Affiliation(s)
- Xiangqian Gao
- School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130, P. R. China
- Hebei Key Laboratory of Boron Nitride Micro and Nano Materials, Hebei University of Technology, Tianjin 300130, P. R. China.
| | - Xindi Huang
- School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130, P. R. China
- Hebei Key Laboratory of Boron Nitride Micro and Nano Materials, Hebei University of Technology, Tianjin 300130, P. R. China.
| | - Jing Lin
- School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130, P. R. China
- Hebei Key Laboratory of Boron Nitride Micro and Nano Materials, Hebei University of Technology, Tianjin 300130, P. R. China.
| | - Chao Yu
- School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130, P. R. China
- Hebei Key Laboratory of Boron Nitride Micro and Nano Materials, Hebei University of Technology, Tianjin 300130, P. R. China.
| | - Chengchun Tang
- School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130, P. R. China
- Hebei Key Laboratory of Boron Nitride Micro and Nano Materials, Hebei University of Technology, Tianjin 300130, P. R. China.
| | - Yang Huang
- School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130, P. R. China
- Hebei Key Laboratory of Boron Nitride Micro and Nano Materials, Hebei University of Technology, Tianjin 300130, P. R. China.
| |
Collapse
|
17
|
Zhao C, Liu G, Tan Q, Gao M, Chen G, Huang X, Xu X, Li L, Wang J, Zhang Y, Xu D. Polysaccharide-based biopolymer hydrogels for heavy metal detection and adsorption. J Adv Res 2023; 44:53-70. [PMID: 36725194 PMCID: PMC9936414 DOI: 10.1016/j.jare.2022.04.005] [Citation(s) in RCA: 46] [Impact Index Per Article: 46.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2022] [Revised: 03/14/2022] [Accepted: 04/09/2022] [Indexed: 02/04/2023] Open
Abstract
BACKGROUND With rapid development in agriculture and industry, water polluted with heavy metallic ions has come to be a serious problem. Adsorption-based methods are simple, efficient, and broadly used to eliminate heavy metals. Conventional adsorption materials have the problems of secondary environmental contamination. Hydrogels are considered effective adsorbents, and those prepared from biopolymers are biocompatible, biodegradable, non-toxic, safe to handle, and increasingly used to adsorb heavy metal ions. AIM OF REVIEW The natural origin and easy degradability of biopolymer hydrogels make them potential for development in environmental remediation. Its water absorption capacity enables it to efficiently adsorb various pollutants in the aqueous environment, and its internal pore channels increase the specific surface area for adsorption, which can provide abundant active binding sites for heavy metal ions through chemical modification. KEY SCIENTIFIC CONCEPT OF REVIEW As the most representative of biopolymer hydrogels, polysaccharide-based hydrogels are diverse, physically and chemically stable, and can undergo complex chemical modifications to enhance their performance, thus exhibiting superior ability to remove contaminants. This review summarizes the preparation methods of hydrogels, followed by a discussion of the main categories and applications of polysaccharide-based biopolymer hydrogels.
Collapse
Affiliation(s)
- Chenxi Zhao
- Institute of Vegetables and Flowers, Chinese Academy of Agricultural Sciences, Key Laboratory of Vegetables Quality and Safety Control, Ministry of Agriculture of China, Beijing 100081, People's Republic of China; College of Horticulture, Northeast Agricultural University, Harbin 150030, People's Republic of China
| | - Guangyang Liu
- Institute of Vegetables and Flowers, Chinese Academy of Agricultural Sciences, Key Laboratory of Vegetables Quality and Safety Control, Ministry of Agriculture of China, Beijing 100081, People's Republic of China.
| | - Qiyue Tan
- Institute of Vegetables and Flowers, Chinese Academy of Agricultural Sciences, Key Laboratory of Vegetables Quality and Safety Control, Ministry of Agriculture of China, Beijing 100081, People's Republic of China; College of Horticulture, Northeast Agricultural University, Harbin 150030, People's Republic of China
| | - Mingkun Gao
- Institute of Vegetables and Flowers, Chinese Academy of Agricultural Sciences, Key Laboratory of Vegetables Quality and Safety Control, Ministry of Agriculture of China, Beijing 100081, People's Republic of China
| | - Ge Chen
- Institute of Vegetables and Flowers, Chinese Academy of Agricultural Sciences, Key Laboratory of Vegetables Quality and Safety Control, Ministry of Agriculture of China, Beijing 100081, People's Republic of China
| | - Xiaodong Huang
- Institute of Vegetables and Flowers, Chinese Academy of Agricultural Sciences, Key Laboratory of Vegetables Quality and Safety Control, Ministry of Agriculture of China, Beijing 100081, People's Republic of China
| | - Xiaomin Xu
- Institute of Vegetables and Flowers, Chinese Academy of Agricultural Sciences, Key Laboratory of Vegetables Quality and Safety Control, Ministry of Agriculture of China, Beijing 100081, People's Republic of China
| | - Lingyun Li
- Institute of Vegetables and Flowers, Chinese Academy of Agricultural Sciences, Key Laboratory of Vegetables Quality and Safety Control, Ministry of Agriculture of China, Beijing 100081, People's Republic of China
| | - Jing Wang
- Institute of Quality Standard and Testing Technology for Agro Products, Chinese Academy of Agricultural Sciences, Key Laboratory of Agrifood Safety and Quality, Ministry of Agriculture of China, Beijing 100081, People's Republic of China
| | - Yaowei Zhang
- College of Horticulture, Northeast Agricultural University, Harbin 150030, People's Republic of China.
| | - Donghui Xu
- Institute of Vegetables and Flowers, Chinese Academy of Agricultural Sciences, Key Laboratory of Vegetables Quality and Safety Control, Ministry of Agriculture of China, Beijing 100081, People's Republic of China.
| |
Collapse
|
18
|
Chen J, Zhao K, Liu L, Gao Y, Zheng L, Liu M. Modified kaolin hydrogel for Cu 2+ adsorption. E-POLYMERS 2022. [DOI: 10.1515/epoly-2022-0085] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
Abstract
Removal of Cu2+ ions from contaminated water is an important but challenging task. This study reports the synthesis of a composite hydrogel from two natural polysaccharides, namely, sodium alginate and chitosan, using inexpensive kaolin as a raw material and polyacrylamide as a modifier. The hydrogel had a high adsorption capacity and selectivity for Cu2+. The composite hydrogel was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The pseudo-second-order kinetic model was the most suitable model for the kinetic results, and the Langmuir isotherm model was the most representative of the sorption system. The results revealed that the adsorption process was mainly controlled by chemisorption. The maximum adsorption capacity of the adsorbent was 106.4 mg·g−1. Therefore, this study presents a new perspective on the application of composite hydrogels as Cu2+ adsorbents.
Collapse
Affiliation(s)
- Jin Chen
- College of Material Science and Engineering, Xi’an University of Science and Technology , Xi’an 710054 , China
| | - Kun Zhao
- College of Material Science and Engineering, Xi’an University of Science and Technology , Xi’an 710054 , China
| | - Lu Liu
- College of Material Science and Engineering, Xi’an University of Science and Technology , Xi’an 710054 , China
| | - Yuyu Gao
- College of Material Science and Engineering, Xi’an University of Science and Technology , Xi’an 710054 , China
| | - Lu Zheng
- College of Material Science and Engineering, Xi’an University of Science and Technology , Xi’an 710054 , China
| | - Min Liu
- College of Material Science and Engineering, Xi’an University of Science and Technology , Xi’an 710054 , China
| |
Collapse
|
19
|
Adsorption behaviours of copper(II), lead(II), and cadmium(II) ions from aqueous solution by polyethylenimine -modified magnetic hydrogel nanocomposites. JOURNAL OF POLYMER RESEARCH 2022. [DOI: 10.1007/s10965-022-03377-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
|
20
|
Comparative Studies of RSM, RSM–GA and ANFILS for Modeling and Optimization of Naphthalene Adsorption on Chitosan–CTAB–Sodium Bentonite Clay Matrix. JOURNAL OF APPLIED SCIENCE & PROCESS ENGINEERING 2022. [DOI: 10.33736/jaspe.4749.2022] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022] Open
Abstract
The aim of this article was to compare the predictive abilities of the optimization techniques of response surface methodology (RSM), the hybrid of RSM–genetic algorithm (RSM–GA) and adaptive neuro-fuzzy interference logic system (ANFILS) for design responses of % removal of naphthalene and adsorption capacity of the synthesized composite nanoparticles of chitosan–cetyltrimethylammonium bromide (CTAB)–sodium bentonite clay. The process variables considered were surfactant concentration, , activation time, , activation temperature, , and chitosan dosage, . The ANFILS models showed better modeling abilities of the adsorption data on the synthesized composite adsorbent than those of ANN for reason of lower % mean absolute deviation, lower % error value, higher coefficient of determination, , amongst others and lower error functions’ values than those obtained using ANN for both responses. When applied RSM, the hybrid of RSM–genetic algorithm (RSM–GA) and ANFILS 3–D surface pot optimization technique to determine the optimal conditions for both responses, ANFILS was adjudged the best. The ANFILS predicted optimal conditions were = 116.00 mg/L, = 2.06 h, = 81.2oC and = 5.20 g. Excellent agreements were achieved between the predicted responses of 99.055% removal of naphthalene and 248.6375 mg/g adsorption capacity and their corresponding experimental values of 99.020% and 248.86 mg/g with % errors of -0.0353 and 0.0894 respectively. Hence, in this study, ANFILS has been successfully used to model and optimize the conditions for the treatment of industrial wastewater containing polycyclic aromatic compounds, especially naphthalene and is hereby recommended for such and similar studies.
Collapse
|
21
|
Zhang R, Liu B, Ma J, Zhu R. Preparation and characterization of carboxymethyl cellulose/chitosan/alginic acid hydrogels with adjustable pore structure for adsorption of heavy metal ions. Eur Polym J 2022. [DOI: 10.1016/j.eurpolymj.2022.111577] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
22
|
Wu X, Song Y, Yin P, Xu Q, Yang Z, Xu Y, Liu X, Wang F, Wang Y, Sun W, Cai H. Construction of a novel double network polymer composite and evaluation of its highly efficient adsorption properties for copper ions. J Appl Polym Sci 2022. [DOI: 10.1002/app.53007] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Xiaoqiong Wu
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| | - Yutong Song
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| | - Ping Yin
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| | - Qiang Xu
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| | - Zhenglong Yang
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| | - Yanbin Xu
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| | - Xiguang Liu
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| | - Feng Wang
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| | - Ying Wang
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| | - Wenjuan Sun
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| | - Honglan Cai
- School of Chemistry and Materials Science Ludong University Yantai People's Republic of China
| |
Collapse
|
23
|
Preparation of Ion 2+-COS/SA Multifunctional Gel Films for Skin Wound Healing by an In Situ Spray Method. Mar Drugs 2022; 20:md20060401. [PMID: 35736204 PMCID: PMC9227795 DOI: 10.3390/md20060401] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2022] [Revised: 06/02/2022] [Accepted: 06/14/2022] [Indexed: 12/15/2022] Open
Abstract
The rapid preparation of safe and efficient wound dressings that meet the needs of the entire repair process remains a major challenge for effective therapeutic wound healing. Natural, sprayable Ion2+-COS/SA multifunctional dual-network gel films created by the in situ coordination of chitooligosaccharide (COS), metal ions and sodium alginate (SA) using casting and an in-situ spray method were synthesized. The gel films exhibited excellent physicochemical properties such as swelling, porosity and plasticity at a COS mass fraction of 3%. Furthermore, at this mass fraction, the addition of bimetallic ions led to the display of multifunctional properties, including significant antioxidant, antibacterial and cytocompatibility properties. In addition, experiments in a total skin defect model showed that this multifunctional gel film accelerates wound healing and promotes skin regeneration. These results suggest that the sprayable Ion2+-COS/SA multifunctional pro-healing gel film may be a promising candidate for the clinical treatment of allodermic wounds.
Collapse
|
24
|
Multifunctional Gel Films of Marine Polysaccharides Cross-Linked with Poly-Metal Ions for Wound Healing. Pharmaceuticals (Basel) 2022; 15:ph15060750. [PMID: 35745669 PMCID: PMC9227937 DOI: 10.3390/ph15060750] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2022] [Revised: 06/09/2022] [Accepted: 06/13/2022] [Indexed: 11/17/2022] Open
Abstract
The development of an efficient and convenient material to improve skin tissue regeneration is a major challenge in healthcare. Inspired by the theory of moist wound healing, portable chitooligosaccharide (COS)/sodium alginate (SA) dual-net gel films containing multiple metal ions were prepared by a casting and in-situ spray method, which can be used to significantly promote wound healing without the use of therapeutic drugs. A variety of divalent cations was introduced in this experiment to improve the advantages of each metal ion by forming metal ion chelates with COS. Moreover, the physicochemical properties and antioxidant properties of nIon2+-COS/SA gel films were systematically characterized and evaluated by in vitro experiments. The gel films showed good antibacterial activity against Gram-negative and Gram-positive bacteria. In addition, the gel films showed good cytocompatibility in cellular experiments, and the gel films with Zn2+ and Sr2+ addition significantly accelerated wound healing in whole skin defect model experiments. Therefore, this nIon2+-COS/SA gel film is an ideal candidate material for wound dressing.
Collapse
|
25
|
Ji Z, Zhang Y, Wang H, Li C. Research progress in the removal of heavy metals by modified chitosan. TENSIDE SURFACT DET 2022. [DOI: 10.1515/tsd-2021-2414] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/16/2023]
Abstract
Abstract
Chitosan and its modifiers have been widely studied for their good biocompatibility and excellent adsorption properties for heavy metal ions. The synthesis and application of modified chitosan, the effects of process variables (such as pH, amount of adsorbent, temperature, contact time, etc.), adsorption kinetics, thermodynamics and the adsorption mechanism on the removal of heavy metal ions are reviewed. The purpose is to provide the latest information about chitosan as adsorbent and to promote the synthesis of modified chitosan and its application in the removal of heavy metals.
Collapse
Affiliation(s)
- Zheng Ji
- Department of Medicinal Chemistry , School of Pharmacy, Anhui University of Chinese Medicine , Hefei , China
| | - Yansong Zhang
- Department of Medicinal Chemistry , School of Pharmacy, Anhui University of Chinese Medicine , Hefei , China
| | - Huchuan Wang
- Department of Medicinal Chemistry , School of Pharmacy, Anhui University of Chinese Medicine , Hefei , China
| | - Chuanrun Li
- Department of Medicinal Chemistry , School of Pharmacy, Anhui University of Chinese Medicine , Hefei , China
| |
Collapse
|
26
|
Seida Y, Tokuyama H. Hydrogel Adsorbents for the Removal of Hazardous Pollutants—Requirements and Available Functions as Adsorbent. Gels 2022; 8:gels8040220. [PMID: 35448121 PMCID: PMC9028382 DOI: 10.3390/gels8040220] [Citation(s) in RCA: 15] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/06/2022] [Revised: 03/28/2022] [Accepted: 03/30/2022] [Indexed: 02/04/2023] Open
Abstract
Over the last few decades, various adsorption functions of polymer hydrogels for the removal of hazardous pollutants have been developed. The performance of hydrogel adsorbents depends on the constituents of the gels and the functions produced by the polymer networks of the gels. Research on hydrogels utilizing the characteristic functions of polymer networks has increased over the last decade. The functions of polymer networks are key to the development of advanced adsorbents for the removal of various pollutants. No review has discussed hydrogel adsorbents from the perspective of the roles and functions of polymer networks in hydrogels. This paper briefly reviews the basic requirements of adsorbents and the general characteristics of hydrogels as adsorbents. Thereafter, hydrogels are reviewed on the basis of the roles and functions of the polymer networks in them for the removal of hazardous pollutants by introducing studies published over the last decade. The application of hydrogels as adsorbents for the removal of hazardous pollutants is discussed as well.
Collapse
Affiliation(s)
- Yoshimi Seida
- Natural Science Laboratory, Toyo University, 5-28-20 Hakusan, Bunkyo-ku, Tokyo 112-8606, Japan
- Correspondence: ; Tel.: +81-3-3945-4894
| | - Hideaki Tokuyama
- Department of Chemical Engineering, Tokyo University of Agriculture and Technology, 2-24-16, Naka-cho, Koganei, Tokyo 184-8588, Japan;
| |
Collapse
|
27
|
Schmidt LN, Horst MF, Lencina MMS, López OV, Ninago MD. Gels based on calcium alginate/pillared bentonite: structural characterization and their use as cadmium removal agent. JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH. PART A, TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING 2022; 57:218-228. [PMID: 35275030 DOI: 10.1080/10934529.2022.2050124] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/05/2021] [Revised: 02/24/2022] [Accepted: 02/28/2022] [Indexed: 06/14/2023]
Abstract
In this work, calcium alginate hydrogels with natural and pillared bentonites (0.5 and 5% w/w) were synthetized in two geometries (disks and beads) and their capacity to adsorb cadmium ion from aqueous media was evaluated. Pillarization effect on bentonite morphology was evidenced by SEM, XRD, LD and BET isotherms. Structure and swelling capacity of hydrogels were determined, showing that hydrogels beads with pillared clays presented the higher ability to retain water. Regarding cadmium adsorption capacity, the effect of pH media (3, 5 and 7), the contact time (0 to 320 min.) and the initial cadmium ion concentration (6 to 42 mg/L) were studied employing hydrogel beads. Regardless bentonite type and concentration, the optimal pH cadmium adsorption was 7, reaching the highest adsorption capacity (93%) for hydrogel with 0.5% natural bentonite. Besides, the equilibrium adsorption time was reached at 120 min for all studied hydrogels and experimental data fitted with a pseudo-second order kinetic model.
Collapse
Affiliation(s)
| | - María Fernanda Horst
- Instituto de Química del Sur INQUISUR (UNS-CONICET), Universidad Nacional del Sur, Bahía Blanca, Argentina
- Departamento de Química, Universidad Nacional del Sur, Bahía Blanca, Argentina
| | - María Malvina Soledad Lencina
- Instituto de Química del Sur INQUISUR (UNS-CONICET), Universidad Nacional del Sur, Bahía Blanca, Argentina
- Instituto de Física del Sur IFISUR (UNS-CONICET), Departamento de Física, Universidad Nacional del Sur, Bahía Blanca, Argentina
| | - Olivia Valeria López
- Planta Piloto de Ingeniería Química PLAPIQUI (UNS-CONICET), Bahía Blanca, Argentina
- Departamento de Química, Universidad Nacional del Sur, Bahía Blanca, Argentina
| | - Mario Daniel Ninago
- Facultad de Ciencias Aplicadas a la Industria, Universidad Nacional de Cuyo. (FCAI-UNCuyo) Departamento de Ingeniería Química, San Rafael, Argentina
- Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Buenos Aires, Argentina
| |
Collapse
|
28
|
Study on the Performance of Composite Adsorption of Cu2+ by Chitosan/β-Cyclodextrin Cross-Linked Zeolite. SUSTAINABILITY 2022. [DOI: 10.3390/su14042106] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/27/2023]
Abstract
In order to remove Cu2+ from wastewater, a kind of microsphere adsorbent (SCDO) with high efficiency for Cu2+ adsorption was prepared by the microdrop condensation method, where chitosan (CTS) and sodium alginate (SA) were used as the matrix to crosslink β-cyclodextrin (β-CD) and zeolite (Zeo). The structure and properties of SCDO were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Upon that, the adsorption performance of SCDO for Cu2+ was studied, in which the effects of pH, initial concentration, dosage, adsorption time and temperature were investigated. The results showed that the removal rate of Cu2+ reached 97.08%, and the maximum adsorption capacity was 24.32 mg/g with the temperature at 30 °C, the dosage of SCDO at 12 g/L, the initial concentration of Cu2+ at 100 mg/L, the pH of the solution at 6.0 and the adsorption time at 120 min, respectively. The adsorption process of Cu2+ by SCDO occurred in accordance with quasi-second-order kinetics model and Langmuir adsorption isotherm. After four repeats of continuous adsorption and desorption, the regenerative removal rate of Cu2+ could still reach 84.28%, which indicated that SCDO had outstanding reusability.
Collapse
|
29
|
Li J, Li K, Yan J, ZHOU TAIGANG. Investigation the adsorption behavior of functional biochar-based porous composite for efficient removing Cu(Ⅱ) in aqueous solution. NEW J CHEM 2022. [DOI: 10.1039/d2nj02384a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Biochar was modified by acylation reaction using EDTA. Then, a novel biochar-based porous composite was prepared successfully using modified biochar as base to remove Cu(Ⅱ) in wastewater. In addition, functional...
Collapse
|
30
|
Xu X, He C, Luo F, Wang H, Peng Z. Transparent, Conductive Hydrogels with High Mechanical Strength and Toughness. Polymers (Basel) 2021; 13:2004. [PMID: 34207446 PMCID: PMC8235116 DOI: 10.3390/polym13122004] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/26/2021] [Revised: 06/16/2021] [Accepted: 06/16/2021] [Indexed: 02/06/2023] Open
Abstract
Transparent, conductive hydrogels with good mechanical strength and toughness are in great demand of the fields of biomedical and future wearable smart electronics. We reported a carboxymethyl chitosan (CMCS)-calcium chloride (CaCl2)/polyacrylamide (PAAm)/poly(N-methylol acrylamide (PNMA) transparent, tough and conductive hydrogel containing a bi-physical crosslinking network through in situ free radical polymerization. It showed excellent light transmittance (>90%), excellent toughness (10.72 MJ/m3), good tensile strength (at break, 2.65 MPa), breaking strain (707%), and high elastic modulus (0.30 MPa). The strain sensing performance is found with high sensitivity (maximum gauge factor 9.18, 0.5% detection limit), wide strain response range, fast response and recovery time, nearly zero hysteresis and good repeatability. This study extends the transparent, tough, conductive hydrogels to provide body-surface wearable devices that can accurately and repeatedly monitor the movement of body joints, including the movements of wrists, elbows and knee joints. This study provided a broad development potential for tough, transparent and conductive hydrogels as body-surface intelligent health monitoring systems and implantable soft electronics.
Collapse
Affiliation(s)
- Xiuru Xu
- Guangdong Provincial Key Laboratory of Micro/Nano Optomechatronic Engineering, College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518060, China; (X.X.); (F.L.); (H.W.)
- School of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China;
| | - Chubin He
- School of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China;
| | - Feng Luo
- Guangdong Provincial Key Laboratory of Micro/Nano Optomechatronic Engineering, College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518060, China; (X.X.); (F.L.); (H.W.)
| | - Hao Wang
- Guangdong Provincial Key Laboratory of Micro/Nano Optomechatronic Engineering, College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518060, China; (X.X.); (F.L.); (H.W.)
| | - Zhengchun Peng
- School of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China;
| |
Collapse
|