Research on the Anticorrosion Properties of CeO2-GO/EP Nanocomposite Coating in Simulated Sea Water

CeO2-rGO Composites for Photocatalytic H2 Evolution by Glycerol Photoreforming

The interaction between CeO₂-GO or CeO₂-rGO and gold as co-catalysts were here investigated for solar H₂ production by photoreforming of glycerol. The materials were prepared by a solar photoreduction/deposition method, where in addition to the activation of CeO₂ the excited electrons were able to reduce the gold precursor to metallic gold and the GO into rGO. The presence of gold was fundamental to boost the H₂ production, whereas the GO or the rGO extended the visible-light activity of cerium oxide (as confirmed by UV-DRS). Furthermore, the strong interaction between CeO₂ and Au (verified by XPS and TEM) led to good stability of the CeO₂-rGO-Au sample with the evolved H₂ that increased during five consecutive runs of glycerol photoreforming. This catalytic behaviour was ascribed to the progressive reduction of GO into rGO, as shown by Raman measurements of the photocatalytic runs. The good charge carrier separation obtained with the CeO₂-rGO-Au system allowed the simultaneous production of H₂ and reduction of GO in the course of the photoreforming reaction. These peculiar features exhibited by these unconventional photocatalysts are promising to propose new solar-light-driven photocatalysts for green hydrogen production.

Metals and metal oxides polymer frameworks as advanced anticorrosive materials: design, performance, and future direction

Metals (Ms) and metal oxides (MOs) possess a strong tendency to coordinate and combine with organic polymers to form respective metal–polymer frameworks (MPFs) and metal oxide polymer frameworks (MOPFs). MPFs and MOPFs can be regarded as composites of organic polymers. MPFs and MOPFs are widely used for industrial and biological applications including as anticorrosive materials in the aqueous phase as well as in the coating conditions. The presence of the Ms and MOs in the polymer coatings improves the corrosion inhibition potential of MPFs and MOPFs by improving their self-healing properties. The Ms and MOs fill the micropores and cracks through which corrosive species such as water, oxygen, and corrosive ions and salts can diffuse and destroy the coating structures. Therefore, the Ms and MOs enhance the durability as well as the effectiveness of the polymer coatings. The present review article is intended to describe the corrosion inhibition potential of some MPFs and MOPFs of some most frequently utilized transition metal elements such as Ti, Si, Zn, Ce, Ag, and Au. The mechanism of corrosion inhibition of MPFs and MOPFs is also described in the presence and absence of metal and metal oxides.

Effect of CeO2-GO Nanocomposite on the Anticorrosion Properties of Epoxy Coating in Simulated Acid Rain Solution

The lamellar structure of graphene oxide and the filling effect of nano-cerium oxide particles together provide a good barrier and stability to coating. In this paper, cerium oxide-graphene oxide (4:1) nanocomposite was prepared by the hydrothermal synthesis method. The effect of cerium oxide-graphene oxide (4:1) nanocomposite on the anticorrosion properties of epoxy coating in simulated acid rain solution was studied by open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), Mott-Schottky curve, Tafel curve, and micromorphological characterization, in order to compare it with pure epoxy coating, graphene oxide epoxy coating, and cerium oxide epoxy coating. The obtained results showed that cerium oxide-graphene oxide (4:1) epoxy coating's protection efficiency was as high as 98.62%. These results indicated that cerium oxide-graphene oxide modified anticorrosive coating had an excellent application prospect in an acid rain environment. Meanwhile, owing to the poor protection ability of epoxy resin and unstably hydrolysis product of CeO2 to the acidic medium, the resistance of CeO2-GO (4:1)/EP coating to acidic corrosive medium was relatively poorer than that of neutral and saline-alkali corrosive medium.

Evaluation of the Anticorrosion Performance of CeO2-Modified Graphene Oxide Nanocomposite Epoxy Coating Subjected to Simulated Saline-Alkali Solution

In the marine service environment, metal materials have a serious risk of corrosion. The corrosion rate of metal materials will be accelerated by the dual action of temperature change and alkali salt in saline-alkali environment. In order to delay the metal materials’ corrosion rate and prolong their service life, this paper used a CeO₂–GO (4:1) nanocomposite prepared by the hydrothermal synthesis method to make an anticorrosion coating. The anticorrosion performance was evaluated by stereo microscope and 3D images of the corrosion site were fitted for calculation. The state evolution of the CeO₂–GO (4:1)/EP coating immerged in a simulated saline-alkali solution was studied by open circuit potential (OCP), electrochemical alternating current impedance spectroscopy (EIS), Mott–Schottky curve and Tafel curve. The results indicated that CeO₂–GO (4:1) nanocomposites exhibited good resistance compared with graphene oxide and nano cerium oxide in a simulated saline-alkali environment. The research in this paper lays a firm theoretical foundation for the application of nano cerium-oxide-modified graphene oxide anticorrosive coating in saline-alkali environment engineering.

Nano-SiO2 and Silane Coupling Agent Co-Decorated Graphene Oxides with Enhanced Anti-Corrosion Performance of Epoxy Composite Coatings

Coatings are of great significance for irons and steels in regards to the harsh marine environment. Graphene oxides (GO) have been considered as an ideal filler material of epoxy coating. However, the undesired dispersion in the epoxy together with easy agglomeration and stacking remain great problems for practical application of GO composited epoxy coatings. A method that can effectively solve both self-aggregation and poor dispersion of GO is highly desired. Herein, we present a high dispersion strategy of graphene oxides in epoxy by co-decoration of nano-SiO₂ and silane coupling agent. The co-decorated GO filled epoxy coating exhibits high anti-corrosion performance, including high electrochemical impedance, high self-corrosive potential, low self-corrosive current, and superior electrochemical impedance stability for ten days to Q235 carbon steel. This work displays new possibilities for designing novel coating materials with high performance toward practical marine anti-corrosion applications.