Expandable Graphite for Flame Retardant PA6 Applications

Research on Thermal Stability and Flammability of Wood Scob-Based Loose-Fill Thermal Insulation Impregnated with Multicomponent Suspensions

Loose-fill thermal composite insulation produced from surface-modified wood scobs has been explored as a potential fire-resistant material for building envelopes. This work involves fire resistance behavior comparisons between four coating systems consisting of liquid glass, liquid glass-tung oil, liquid glass-expandable graphite, and liquid glass-tung oil-expandable graphite. The techniques of thermogravimetric and differential thermogravimetric analyses, gross heat combustion via a calorimetric bomb, cone calorimetry, SEM imaging of char residues, and energy dispersive spectrometry for elemental analysis, as well as propensity to undergo continuous smoldering, were implemented. The coating technique resulted in greater thermal stability at a higher temperature range (500-650 °C) of the resulting loose-fill thermal composite insulation, reduced flame-damaged area heights after the exposure of samples at 45° for 15 s and 30 s, with a maximum of 49% decreased gross heat combustion, reduced heat release and total smoke release rates, improved char residue layer formation during combustion and changed smoldering behavior due to the formation of homogeneous and dense carbon layers. The results showed that the highest positive impact was obtained using the liquid glass and liquid glass-expandable graphite system because of the ability of the liquid glass to cover the wood scob particle surface and form a stable and strong expanding carbon layer.

A Multi-Material Flame-Retarding System Based on Expandable Graphite for Glass-Fiber-Reinforced PA6

A synergistic multi-material flame retardant system based on expandable graphite (EG), aluminum diethylphosphinate (AlPi), melamine polyphosphate (MPP), and montmorillonite (MMT) has been studied in glass-fiber-reinforced polyamide 6 (PA6). Analytical evaluations and fire performances were evaluated using coupled thermogravimetric analysis (TGA) and Fourier-transform infrared spectroscopy (FTIR) as well as cone calorimetry, UL-94 fire testing, and limiting oxygen index (LOI). A combination of EG/AlPi/MPP/MMT has been shown to provide superior flame-retarding properties when integrated at 20 wt.% into glass-fiber-reinforced PA6 (25 wt.%), achieving UL-94 V0 classification and an oxygen index of 32%. Strong residue formation resulted in low heat development overall, with a peak heat release rate (pHRR) of 103 kW/m2, a maximum of average heat release rate (MAHRE) of 33 kW/m2, and deficient total smoke production (TSP) of 3.8 m2. Particularly remarkable was the structural stability of the char residue. The char residue could easily withstand an areal weight of 35 g/cm2, showing no visible deformation.

Fabrication of Rigid Isocyanate-Based Polyimide Foam Achieved Excellent Use Safety via Synergy between Expandable Graphite and Phosphorus-Containing Polyol

For the advantages of low cost, excellent thermal insulation, and sound absorption properties, the rigid isocyanate-based polyimide foam (RPIF) presents great application prospects as a building insulation material. However, its inflammability and the accompanying toxic fumes create huge safety hazard. In this paper, reactive phosphate-containing polyol (PPCP) is synthesized and employed with expandable graphite (EG) to obtain RPIF with excellent use safety. EG can be considered as an ideal partner for PPCP to weaken the drawbacks in toxic fume release. Limiting oxygen index (LOI), cone calorimeter test (CCT), and toxic gas results show that the combination of PPCP and EG can synergistically enhance flame retardancy and the use safety of RPIF owing to the unique structure of a dense char layer possessing a flame barrier and toxic gas adsorption effects. When EG and PPCP are simultaneously applied to the RPIF system, the higher EG dosage will bring higher positive synergistic effects in the use safety of RPIF. The most preferred ratio of EG and PPCP is 2:1 (RPIF-10-5) in this study; RPIF-10-5 shows the highest LOI, low CCT results and specific optical density of smoke, and low HCN concentration. This design and the findings are of great significance to improving the application of RPIF.

Synthesis of P-/N-Containing Bamboo-Activated Carbon toward Enhanced Thermal Stability and Flame Retardancy of Polylactic Acid

A P-/N-containing bamboo-activated carbon (BACm) was successfully synthesized by steam activation of bamboo charcoal and chemical grafting to as-prepared activated carbon using the reaction of phosphoric acid and urea. Characterizations of BACm presented a synergistic grafting of P and N elements to the BAC surface. The BACm was further loaded in a polylactic acid (PLA) matrix to prepare BACm/PLA composites. Mechanical strength study showed tensile strength dropped from 75.19 MPa to 61.30 MPa, and tensile modulus from 602.49 MPa to 375.56 MPa, suggesting a rigidity reduction and deformation resistance enhancement owing to the roughened surface of BACm that interlocked with the polymer. The thermogravimetric analysis showed that the carbon residue rate of BACm dramatically fell to 49.25 wt.% in contrast to 88.28% for the control BAC, and cone calorimeter measurements confirmed the enhancement of flame retardancy of the composites with BACm loading, and the carbon residue rate increased progressively with BACm loading in the composites, notably up to 8.60 wt.% for the BAC/PLA9 composite, which outweighed the theoretical residue rate by more than 50%. The elemental analysis also confirmed rich P/N levels of the dense carbon residue layer that could perform synergistically and effectively in fire suppression. The BACm tended to stimulate the earlier decomposition of the composites and formed a continuous residual carbon layer which functioned as an effective barrier hindering the mass and heat transfer between the combustion zone and the underlying matrix. Moreover, 9 wt.% of BACm loading could attain a V-0 rating (UL94) for the composite with an improved limiting oxygen index up to 31.7%. The biomass-based modified activated carbon in this work could be considered as an alternative flame retardant in polymer applications.

The Impact of β-Radiation Crosslinking on Flammability Properties of PA6 Modified by Commercially Available Flame-Retardant Additives

A comparative study was conducted investigating the influence of β-radiation crosslinking (β-RC) on the fire behavior of flame retardant-modified polyamide 6 (PA6). In order to provide a comprehensive overview, a variety of commercially available flame-retardant additives were investigated, exhibiting different flame retarding actions such as delusion, char formation, intumescence and flame poisoning. This study focused on the identification of differences in the influence of β-RC on fire behavior. Coupled thermal gravimetrical analysis (TGA) and Fourier transformation infrared spectroscopy (FTIR) were used to conduct changes within the decomposition processes. Dynamic thermal analysis (DTA) was used to identify structural stability limits and fire testing was conducted using the limiting oxygen index (LOI), vertical UL-94 and cone calorimeter testing. Crosslinking was found to substantially change the fire behavior observed, whereas the observed phenomena were exclusively physical for the given formulations studied: warpage, char residue destruction and anti-dripping. Despite these phenomena being observed for all β-RC formulations, the impact on fire resistivity properties were found to be very different. However, the overall fire protection properties measured in UL-94 fire tests were found to deteriorate for β-RC formulations. Only β-RC formulations based on PA6/EG were found to achieve a UL-94 V0 classification.

Expandable Graphite as a Multifunctional Flame-Retarding Additive for Highly Filled Thermal Conductive Polymer Formulations

Expandable graphite (EG) and graphite (G) were assessed as multifunctional additives improving both flame retardancy and thermal conductivity in highly filled, thermal conductive polymeric materials based on polyamide 6 (PA6). Fire testing was conducted using modern UL-94, LOI and cone calorimeter test setups. It is demonstrated that thermal conductivity can significantly influence the time to ignition, although offering little fire resistance once ignited even in highly filled systems. Thus, for PA6 formulations containing solely 70 wt.% G, the peak heat release rate (pHRR) measured in cone calorimeter tests was 193 kW/m², whereas PA6 formulations containing 20 wt.% EG/50 wt.% G did not exhibit a measurable heat development. Particular attention was paid to effect separation between thermal conductivity and residue formation. Good thermal conductivity properties are proven to be particularly effective in test scenarios where the heat impact is comparatively low and the testing environment provides good heat dissipation and convective cooling possibilities. For candle-like ignition scenarios (e.g., LOI), filling levels of >50 wt.% (G or EG/G) are shown to be sufficient to suppress ignition exclusively by thermal conductivity. V0 classifications in UL-94 vertical burning tests were achieved for PA6 formulations containing ≥70 wt.% G, ≥25 wt.% EG and ≥20 wt.% EG/25 wt.% G.

Expandable Graphite, Aluminum Diethylphospinate and Melamine Polyphosphate as Flame Retarding System in Glass Fiber-Reinforced PA6

A flame retardant system based on expandable graphite (EG), aluminum diethylphosphinate (AlPI) and melamine polyphosphate (MPP) was investigated in glass fiber- (GF) reinforced polyamide 6 (PA6). Burning characteristics were evaluated via cone calorimeter, limiting oxygen index (LOI) and UL-94 tests. Thermogravimetric analysis (TGA) and coupled Fourier transform infrared spectroscopy (FTIR) was used to investigate the decomposition process as well as flame retardant modes of actions. Specifically, in the cone calorimeter tests, formulations containing EG showed excellent flame retardant properties for non-reinforced and reinforced PA6. The best performance was achieved for 25 wt.% glass fiber-reinforced PA6 containing solely 20 wt.% EG, corresponding to a measured pHRR of 134 kW/m² and a total smoke production of 1.2 m². Higher glass fiber contents of 45 wt.% (30 vol.%) revealed a lower char volume, which was attributed to both the limited space available for expansion and the sheer-induced reduction in particle size during processing. All of the reinforced PA6 formulations only achieved V2 classifications, but this was at low filling degrees (10 wt.%) for both net EG or EG/AlPi/MPP combinations. For GF-reinforced PA6 containing EG/AlPi/MPP mixtures, a synergistic effect was found to improve the oxygen index up to 30.6%.