Synthesis and Heavy-Metal Sorption Studies of N,N-Dimethylacrylamide-Based Hydrogels

Synergistic effect of ZnO/Ag2O@g-C3N4 based nanocomposites embedded in carrageenan matrix for dye degradation in water

This research achieved success by synthesizing innovative nanocomposite composed of zinc oxide (ZnO), graphitic carbon nitride (g-C3N4) and silver oxide (Ag2O) nanomaterials incorporated into a carrageenan matrix, thus creating an environmentally friendly and stable support structure. The synthesis process involved hydrothermal and chemical precipitation methods to create photocatalytic g-C3N4, ZnO, and Ag2O nanocomposites. The success is evident through the characterization results, which unveiled distinctive peaks corresponding to Zn-O (590-404 cm-1) and Ag-O (2072 cm-1) stretching in the Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses, conclusively confirming the successful synthesis of g-C3N4, ZnO, Ag2O, and their respective nanocomposites. Further validation through a scanning electron microscope coupled with an energy dispersive spectrometer (SEM-EDX) and elemental mapping affirmed the presence of Zn, O, Ag, C, and N. Additionally, transmission electron microscope (TEM) imaging unveiled the nanosheet morphology of g-C3N4, the nanorod structure of ZnO, and the spherical form of Ag2O nanomaterials. ZnO and Ag2O nanomaterials demonstrated a consistent 10-20 nm size range. To underscore their ability to harness visible light, the nanomaterials were excited at 380 nm, emitting visible light emission within the 400-450 nm range. The synthesized nanocomposites showcased outstanding adsorption and photocatalytic properties, achieving efficiency ranging from 80 % to 98 %, attributed to the synergistic interactions between the various components. These findings culminate in a confirmation of the research's success, validating the exceptional potential of these nanocomposites for various applications.

Bio-Based Polyurethane Foams for the Removal of Petroleum-Derived Pollutants: Sorption in Batch and in Continuous-Flow

In this paper, we evaluated the potential of two synthesized bio-based polyurethane foams, PU1 and PU2, for the removal of diesel and gasoline from water mixtures. We started the investigation with the experiment in batch. The total sorption capacity S (g/g) for the diesel/water system was slightly higher with respect to gasoline/water, with a value of 62 g/g for PU1 and 65 g/g for PU2. We found that the sorption follows a pseudo second-order kinetic model for both the materials. The experimental data showed that the best isotherm models were obtained with Langmuir and Redlich–Peterson models. In addition, to provide an idea of the process scalability for future industrial applications, we tested the sorption capacity of the foams using a continuous-flow of the same oil/water mixtures and we obtained performances even better with respect to the batch test. The regeneration can be performed up to 50 times by centrifuge, without losing efficacy.

Removal of Copper(II) from Aqueous Environment Using Silk Sericin-Derived Carbon

Sericin is a by-product of the silk industry. Its recycling contributes to environmental protection and the sustainable development of the cocoon silk industry. In this paper, on the basis of realizing sericin enrichment in solution, the Cu(II) adsorption capacities of sericin-derived carbon (SC), prepared at different pyrolysis temperatures, were studied. SC was characterized using scanning electron microscopy (SEM) and the zeta potential. The effects of the initial concentration of Cu(II), pH, adsorption temperature, and contact time on the adsorption process were evaluated, followed by an investigation of the mechanism of Cu(II) adsorption by SC. The results showed that SC has a porous structure that provides sites for Cu(II) adsorption. The maximum adsorption capacity of Cu(II) onto SC1050, 17.97 mg/g, was obtained at an adsorption temperature of 35 °C and a pH of 5.5. In addition, the pseudo-second-order kinetic model and Langmuir isotherm model correctly described the adsorption process of Cu(II) onto SC1050. Therefore, SC can act as a potential adsorbent for removing Cu(II) from water. This study helps promote the effective use of cocoon silk resources.

Behavior and mechanism of the adsorption of lead by an eco-friendly porous double-network hydrogel derived from keratin

In this study, a novel eco-friendly porous double-network keratin/polyacrylic acid (keratin-PAA) hydrogel was prepared using the one-pot method to improve the adsorption performance of the hydrogel toward Pb(II). The obtained porous keratin-PAA hydrogel was then characterized using nitrogen adsorption-desorption isotherms, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The interaction mechanism of Pb(II) and the keratin-PAA hydrogel was further investigated using X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). The results showed that keratin-PAA hydrogel was successfully synthesized, with a specific surface area of 49.35 m²/g and a uniform pore distribution of 6.20 nm. The synthesized keratin-PAA hydrogel only took 6 min to adsorb nearly 70% of Pb(II) from the solution because of the interconnected porous network. The keratin-PAA hydrogel also showed a maximal adsorption amount of 234.6 mg/g, and satisfactory selectivity toward Pb(II). The adsorption kinetics of the keratin-PAA hydrogel binding to Pb(II) could be better described by the pseudo-second-order model, whereas the adsorption isotherms could be fitted using the Langmuir equation; this suggested that chemisorption was the main rate-limiting step. The XPS and FT-IR analysis results indicated that the sulfur-, nitrogen- and oxygen-containing groups in the keratin-PAA hydrogel were the main binding sites for Pb(II). In real aqueous samples, the keratin-PAA hydrogel could remove 93-104% of Pb(II). It is clear that the keratin-PAA hydrogel is an outstanding adsorbent material for the removal of Pb(II) from aqueous samples.

A Short Review on the N,N-Dimethylacrylamide-Based Hydrogels

Scientists have been encouraged to find different methods for removing harmful heavy metal ions and dyes from bodies of water. The adsorption technique offers promising outcomes for heavy metal ion removal and is simple to run on a large scale, making it appropriate for practical applications. Many adsorbent hydrogels have been developed and reported, comprising N,N-dimethylacrylamide (DMAA)-based hydrogels, which have attracted a lot of interest due to their reusability, simplicity of synthesis, and processing. DMAA hydrogels are also a suitable choice for self-healing materials and materials with good mechanical properties. This review work discusses the recent studies of DMAA-based hydrogels such as hydrogels for dye removal and the removal of hazardous heavy metal ions from water. Furthermore, there are also references about their conduct for self-healing materials and for enhancing mechanical properties.