Enhanced Efficiency of Dye-Sensitized Solar Cells Based on Polymer-Assisted Dispersion of Platinum Nanoparticles/Carbon Nanotubes Nanohybrid Films as FTO-Free Counter Electrodes

Application of Nanohybrid Substrates with Layer-by-Layer Self-Assembling Properties to High-Sensitivity Surface-Enhanced Raman Scattering Detection

The present study was conducted to prepare and investigate large-area, high-sensitivity surface-enhanced Raman scattering (SERS) substrates. Organic/inorganic nanohybrid dispersants consisting of an amphiphilic triblock copolymer (hereafter referred to simply as "copolymer") and graphene oxide (GO) were used to stabilize the growth and size of gold nanoparticles (AuNPs). Ion-dipole forces were present between the AuNPs and copolymer dispersants, while the hydrogen bonds between GO and the copolymer prevented the aggregation of GO, thereby stabilizing the AuNP/GO nanohybrids. Transmission electron microscopy (TEM) revealed that the AuNPs had particle sizes of 25-35 nm and a relatively uniform size distribution. The AuNP/GO nanohybrids were deposited onto the glass substrate by using the solution drop-casting method and employed for SERS detection. The self-assembling properties of two-dimensional sheet-like GO led to a regular lamellar arrangement of AuNP/GO nanohybrids, which could be used for the preparation of large-area SERS substrates. Following removal of the copolymer by annealing at 300 °C for 2 h, measurements were obtained under scanning electron microscopy. The results confirmed that 2D GO nanosheets were capable of stabilizing AuNPs, with the final size reaching approximately 40 nm. These AuNPs were adsorbed on both sides of the GO nanosheets. Because the GO nanosheets were merely 5 nm-thick, a good three-dimensional hot-junction effect was generated along the z-axis of the AuNPs. Lastly, the prepared material was used for the SERS detection of rhodamine 6G (R6G), a commonly used highly fluorescent dye. An enhancement factor (EF) of up to 3.5 × 106 was achieved, and the limit of detection was approximately 10-10 M. Detection limits of 10-10 M and < 10-10 M were also observed with the detection of Direct Blue 200 and the biological molecule adenine. It is therefore evident that AuNP/copolymer/GO nanohybrids are large-area flexible SERS substrates that hold great potential in environmental monitoring and biological system detection applications.

Flexible Hybrid Electronics Nanofiber Electrodes with Excellent Stretchability and Highly Stable Electrical Conductivity for Smart Clothing

In this paper, a side-by-side, dual-nozzle electrospinning process was used to prepare a flexible hybrid electronics (FHE) material with excellent stretchable properties. A highly stable electrical conductivity was also imparted to the resulting membrane electrodes using silver nanoparticles (AgNPs) and carbon-based nanomaterials of different structures. The AgNP/carbon-based nanomaterials were coated onto bicomponent polymer nanofibers (composed of polyurethane (PU) and polyvinylidene difluoride (PVDF)) on the nanofiber membrane. The FHE nanofiber electrodes were finally integrated into clothing designed to accurately measure human body sensing signals (e.g., electrocardiography (ECG) and electromyography (EMG) signals). To effectively increase the high electrical conductivity, a polymer-type dispersant (polyisobutylene-b-poly(oxyethylene)-b-polyisobutylene, a triblock copolymer) was used to effectively and stably disperse AgNPs with different particle sizes and carbon-based nanomaterials with different geometric dimensions (e.g., zero-dimensional carbon black, one-dimensional carbon nanotubes, and two-dimensional graphene) through non-covalent adsorption. Moreover, the bicomponent PVDF-PU nanofibers were immersed in a mixed dispersant of AgNPs and carbon-based nanomaterials at low concentrations, and thermal post-treatment was conducted to improve the electrical conductivity. The AgNP/graphene oxide (GO) nanofiber electrode exhibited a continuous phase with a stable material microstructure after 5000 repetitions of 50% tension-tension fatigue testing. The waveform pattern obtained from the proposed AgNP/GO nanofiber electrode was compared with those of traditional ECG and EMG electrodes. The nanofiber web electrode treated with organic/inorganic mixed dispersants and verified via tests of its electrical and fatigue properties was found to be suitable for long-term ECG and EMG monitoring, and it has excellent potential in wearable smart sensors.

Immobilization of Air-Stable Copper Nanoparticles on Graphene Oxide Flexible Hybrid Films for Smart Clothes

Through the use of organic/inorganic hybrid dispersants—which are composed of polymeric dispersant and two-dimension nanomaterial graphene oxide (GO)—copper nanoparticles (CuNPs) were found to exhibit nano stability, air-stable characteristics, as well as long-term conductive stability. The polymeric dispersant consists of branched poly(oxyethylene)-segmented esters of trimellitic anhydride adduct (polyethylene glycol−trimethylolpropane−trimellitic anhydride, designated as PTT). PTT acts as a stabilizer for CuNPs, which are synthesized via in situ polymerization and redox reaction of the precursor Cu(CH₃COO)₂ within an aqueous system, and use graphene oxide to avoid the reduction reaction of CuNPs. The results show that after 30 days of storage the CuNPs/PTT/GO composite film maintains a highly conductive network (9.06 × 10⁻¹ Ω/sq). These results indicate that organic/inorganic PTT/GO hybrid dispersants can effectively maintain the conductivity stability of CuNPs and address the problem of CuNP oxidation. Finally, the new CuNPs/PTT/GO composite film was applied to the electrocardiogram (ECG) smart clothes. This way, a stable and antioxidant-sensing electrode can be produced, which is expected to serve as a long-term ECG monitoring device.