Carbon Nanotube Reinforced Poly(ε-caprolactone)/Epoxy Blends for Superior Mechanical and Self-Sensing Performance in Multiscale Glass Fiber Composites

Electrospun core-sheath PCL nanofibers loaded with nHA and simvastatin and their potential bone regeneration applications

Introduction: Drugs and biocompatible nanoparticles have raised significant potential in advancing the bone regeneration. Electrospinning technology enables the full realization of the value of drugs and nanoparticles. Methods: In this study, we have successfully fabricated core-sheath nanofibers solely composed of polycaprolactone (PCL) polymer. Simvastatin (SIM) was confined to the core of the nanofibers while nanohydroxyapatite (nHA) was loaded on the nanofiber surface. Results: All the prepared nanofibers exhibited a cylindrical micromorphology, and the core-sheath structure was exploited using a Transmission Electron Microscope. X-ray pattern results indicated that SIM was in an amorphous state within nanofibers, while Fourier Transform InfraRed spectroscopy showed excellent chemical compatibility among SIM, nHA, and PCL. The actual loading of nHA within the nanofiber was determined by a thermogravimetric test due to the high melting point of nHA. Core-sheath nanofibers could release SIM for 672 h, which was attributed to the core-sheath structure. Furthermore, nanofibers loaded with SIM or nHA had a positive impact on cell proliferation, with the core-sheath nanofibers displaying the most favorable cell proliferation behavior. Discussion: Such a synergistic facilitation strategy based on materials and nanostructure may encourage researchers to exploit new biomedical materials in future.

Effect of the Simultaneous Addition of Polycaprolactone and Carbon Nanotubes on the Mechanical, Electrical, and Adhesive Properties of Epoxy Resins Cured with Ionic Liquids

Electrically-conductive epoxy nanocomposites (NCs) with improved mechanical and adhesive properties were achieved through the combined addition of poly(ε-caprolactone) (PCL) and carbon nanotubes (CNTs). Three different ionic liquids (ILs) were used as dual role agents, i.e., as both curing and dispersing agents. Regardless of the IL used, the epoxy/PCL matrix of the NCs showed a single-phase behaviour and similar glass transition (T_g) and crosslinking density (ν_e) values to the unfilled epoxy/PCL/IL systems. Although the CNTs were more poorly dispersed in the epoxy/PCL/CNT/IL NCs than in the reference epoxy/CNT/IL NCs, which led to slightly lower electrical conductivity values, the epoxy/PCL/CNT/IL NCs were still semiconductive. Their low-strain mechanical properties (i.e., flexural modulus and flexural strength) were similar or better than those of the reference epoxy/IL systems and their high-strain mechanical properties (i.e., deformation at break and impact strength) were significantly better. In addition, the positive effects of the PCL and the CNTs on the adhesive properties of the epoxy/IL system were combined. The substitution of ILs for traditional amine-based curing agents and biodegradable PCL for part of the epoxy resin represents an important advance on the road towards greater sustainability.

An Analysis of the Effect of Activation Temperature and Crack Geometry on the Healing Efficiency of Polycaprolactone (PCL)/Epoxy Blends

Self-healing materials have attracted great interest in recent years. Particularly, the use of thermoset/thermoplastics blends has emerged as a good option with relatively low activation temperatures and potential infinite healing cycles. Nevertheless, a methodical study of healing conditions and evaluation is still required for further industrial development. The effect of activation temperature and crack morphology in polycaprolactone (PCL)/epoxy blends are explored. For this purpose, PCL content was varied (5, 10, and 15 wt %) with contents lower than critical composition. Therefore, the morphology of all studied blends is the epoxy matrix with a separated PCL phase. In this sense, an increase in PCL content leads to a reduction in the Tg, due to the partial PCL miscibility, and the presence of larger PCL domains. It was observed that a higher temperature (150 °C) and PCL content led to a more efficient self-healing process because of both the lower viscosity of the melted PCL at higher temperatures and the presence of larger PCL reservoirs when increasing the PCL content. Crack morphology influence was studied by inducing cracks with different tools: a custom crack machine with a cutting blade, a scalpel, and a pin. The results show that the recovery was better when the cracks were smaller and shallower, that is, with the pin. In addition, the healing efficiency by means of both parameters, crack volume and depth change, showed more similar results in slimmer cracks, due to a lower crack width-to-depth ratio.