Development and Characterization of Silver Containing Free Standing Polymer FILMS for Dosimetry Applications

Post-Irradiation Behavior of Colored PVA-Based Films Containing Ag Nanoparticles as Radiation Detectors/Exposure Indicators

Ionizing radiation covers a broad spectrum of applications. Since radioactive/radiation pollution is directly related to radiation risk, radiation levels should be strictly controlled. Different detection methods can be applied for radiation registration and monitoring. In this paper, radiation-induced variations in the optical properties of silver-enriched PVA-based hydrogel films with and without azo dye (Toluidine blue O, TBO, and Methyl red, MR) additives were investigated, and the feasibility of these free-standing films to serve as radiation detectors/exposure indicators was assessed. AgNO3 admixed with PVA gel was used as a source for the radiation-induced synthesis of silver nanoparticles (AgNPs) in irradiated gel films. Three types of sensors were prepared: silver-enriched PVA films containing a small amount of glycerol (AgPVAGly); silver-enriched PVA films with toluidine blue adducts (AgPVAGlyTBO); and silver-enriched PVA films with methyl red additives (AgPVAGlyMR). The selection of TBO and MR was based on their sensitivity to irradiation. The irradiation of the samples was performed in TrueBeam2.1 (VARIAN) using 6 MeV photons. Different doses up to 10 Gy were delivered to the films. The sensitivity of the films was assessed by analyzing the characteristic UV-Vis absorbance peaks on the same day as irradiation and 7, 30, 45, 90, and 180 days after irradiation. It was found that the addition of azo dyes led to an enhanced radiation sensitivity of the AgNPs containing films (0.6 Gy-1 for AgPVAGlyTBO and 0.4 Gy-1 for AgPVAGlyMR) irradiated with <2 Gy doses, indicating their applicability as low-dose exposure indicators. The irradiated films were less sensitive to higher doses. Almost no dose fading was detected between the 7th and 45th day after irradiation. Based on the obtained results, competing AgNP formation and color-bleaching effects in the AgPVAGly films with dye additives are discussed.

Application of Red Onion Peel Extract for Green Synthesis of Silver Nanoparticles in Hydrogels Exhibiting Antimicrobial Properties

UV-initiated green synthesis of metal nanoparticles by using plant extracts as photoreducing agents is of particular interest since it is an environmentally friendly, easy-to-maintain, and cost-effective method. Plant molecules that act as reducing agents are assembled in a highly controlled way which makes them suitable for metal nanoparticle synthesis. Depending on the plant species, their application for green synthesis of metal nanoparticles for diverse applications may contribute to the mediation/reduction in organic waste amounts, thus enabling the implementation of the circular economy concept. In this work, UV-initiated green synthesis of Ag nanoparticles in hydrogels and hydrogel's thin films containing gelatin (matrix), red onion peel extract of different concentrations, water, and a small amount of 1 M AgNO₃ have been investigated and characterized using UV-Vis spectroscopy, SEM and EDS analysis, XRD technique, performing swelling experiments and antimicrobial tests using bacteria (Staphylococcus aureus, Acinetobacter baumannii, Pseudomonas aeruginosa), yeasts (Candida parapsilosis, Candida albicans) and microscopic fungi (Aspergillus flavus, Aspergillus fumigatus). It was found that the antimicrobial effectiveness of the silver-enriched red onion peel extract-gelatin films was higher at lower AgNO₃ concentrations as compared to those usually used in the commercially available antimicrobial products. The enhancement of the antimicrobial effectiveness was analyzed and discussed, assuming the synergy between photoreducing agent (red onion peel extract) and silver nitrate (AgNO₃) in the initial gel solutions leading to the intensification of Ag nanoparticles production.

Investigation of Colored Film Indicators for the Assessment of the Occasional Radiation Exposure

Occupational radiation exposure monitoring is well-established in clinical or industrial environments with various different dosimeter systems. Despite the availability of many dosimetry methods and devices, a challenge with the occasional exposure registration, which may occur due to the spilling of radioactive materials or splitting of these materials in the environment, still exists, because not every individual will have an appropriate dosimeter at the time of the irradiation event. The aim of this work was to develop radiation-sensitive films—color-changing radiation indicators, which can be attached to or integrated in the textile. Polyvinyl alcohol (PVA)-based polymer hydrogels were used as a basis for fabrication of radiation indicator films. Several organic dyes (brilliant carmosine (BC), brilliant scarlet (BS), methylene red (MR), brilliant green (BG), brilliant blue (BB), methylene blue (MB) and xylenol orange (XiO)) were used as a coloring additives. Moreover, PVA films enriched with Ag nanoparticles (PVA-Ag) were investigated. In order to assess the radiation sensitivity of the produced films, experimental samples were irradiated in a linear accelerator with 6 MeV X-ray photons and the radiation sensitivity of irradiated films was evaluated using UV–Vis spectrophotometry method. The most sensitive were PVA-BB films indicating 0.4 Gy−1 sensitivity in low-dose (0–1 or 2 Gy) range. The sensitivity at higher doses was modest. These PVA-dye films were sensitive enough to detect doses up to 10 Gy and PVA-MR film indicated stable 33.3% decolorization after irradiation at this dose. It was found that the dose sensitivity of all PVA-Ag gel films varied from 0.068 to 0.11 Gy−1 and was dependent on the Ag additives concentration. Exchange of a small amount of water with ethanol or isopropanol caused the enhancement of radiation sensitivity in the films with the lowest AgNO3 concentration. Radiation-induced color change of AgPVA films varied between 30 and 40%. Performed research demonstrated the potential of colored hydrogel films in their applications as indicators for the assessment of the occasional radiation exposure.

Chemical Overview of Gel Dosimetry Systems: A Comprehensive Review

Advances in radiotherapy technology during the last 25 years have significantly improved both dose conformation to tumors and the preservation of healthy tissues, achieving almost real-time feedback by means of high-precision treatments and theranostics. Owing to this, developing high-performance systems capable of coping with the challenging requirements of modern ionizing radiation is a key issue to overcome the limitations of traditional dosimeters. In this regard, a deep understanding of the physicochemical basis of gel dosimetry, as one of the most promising tools for the evaluation of 3D high-spatial-resolution dose distributions, represents the starting point for developing new and innovative systems. This review aims to contribute thorough descriptions of the chemical processes and interactions that condition gel dosimetry outputs, often phenomenologically addressed, and particularly formulations reported since 2017.

Dosimetric Performance of Poly(vinyl alcohol)/Silver Nanoparticles Hybrid Nanomaterials for Colorimetric Sensing of Gamma Radiation

A colorimetric liquid sensor based on a poly(vinyl alcohol)/silver nanoparticle (PVA/AgNPs) hybrid nanomaterial was developed for gamma radiation in the range of 0−100 Gy. In this study, gamma rays (Cobalt-60 source) triggered the aggregation of AgNPs in a PVA/silver nitrate (AgNO3) hybrid solution. The color of this solution visibly changed from colorless to dark yellow. Absorption spectra of the PVA/AgNPs solution were analyzed by UV-Vis spectrophotometry in the range of 350−800 nm. Important parameters, such as pH and AgNO3 concentration were optimized. The accuracy, sensitivity, stability, and uncertainty of the sensor were investigated and compared to the reference standard dosimeter. Based on the spectrophotometric results, an excellent positive linear correlation (r = 0.998) between the absorption intensity and received dose was found. For the accuracy, the intra-class correlation coefficient (ICC) between the PVA/AgNPs sensor and the standard Fricke dosimeter was 0.998 (95%CI). The sensitivity of this sensor was 2.06 times higher than the standard dosimeter. The limit of detection of the liquid dosimeter was 13.4 Gy. Moreover, the overall uncertainty of this sensor was estimated at 4.962%, in the acceptable range for routine standard dosimeters (<6%). Based on its dosimetric performance, this new PVA/AgNPs sensor has potential for application as an alternative gamma sensor for routine dose monitoring in the range of 13.4−100 Gy.