Development of Cerium Oxide/Corncob Nanocomposite: A Cost-Effective and Eco-Friendly Adsorbent for the Removal of Heavy Metals

Potassium permanganate-modified eggshell biosorbent for the removal of diclofenac from liquid environment: adsorption performance, isotherm, kinetic, and thermodynamic analyses

This study assess how well diclofenac (DCF) can be separated from aqueous solution using potassium permanganate-modified eggshell biosorbent (MEB). The MEB produced was characterised using XRD, FTIR, and SEM. Batch experiments were conducted to examine and assess the impact of contact time, adsorbent dosage, initial concentration, and temperature on the adsorption capacity of the MEB in the DCF sequestration. The best parameters to obtained 95.64% DCF removal from liquid environment were 0.05 g MEB weight, 50 mg/L initial concentration, and 60 min contact time at room temperature. The maximum DCF sequestration capacity was found to be 159.57 mg/g with 0.05 g of MEB at 298 K. The adsorption isotherm data were more accurately predicted by the Freundlich model, indicating a process of heterogeneous multilayer adsorption. The results of the kinetic study indicated that the pseudo-second-order kinetic models best matched the experimental data. The findings revealed that the dynamic of DCF entrapment is largely chemisorption and diffusion controlled. Based on the values of thermodynamic parameters, the process is both spontaneous and endothermic. The primary processes of DCF sorption mechanism onto the MEB were chemical surface complexation, hydrogen bonding, π-π stacking, and electrostatic interactions. The produced MEB showed effective DCF separation from the aqueous solution and continued to have maximal adsorption capability even after five regeneration cycles. These findings suggest that MEB could be highly efficient adsorbent for the removal of DCF from pharmaceutical wastewater.

Exploring the Potential of Endophytic Microorganisms and Nanoparticles for Enhanced Water Remediation

Endophytic microorganisms contribute significantly to water bioremediation by enhancing pollutant degradation and supporting aquatic plant health and resilience by releasing bioactive compounds and enzymes. These microorganisms inhabit plant tissues without causing disease or any noticeable symptoms. Endophytes effectively aid in eliminating contaminants from water systems. Nanoparticles serve as potent enhancers in bioremediation processes, augmenting the efficiency of pollutant degradation by increasing surface area and bioavailability, thereby improving the efficacy and rate of remediation. Their controlled nutrient release and ability to stabilize endophytic colonization further contribute to the enhanced and sustainable elimination of contaminated environments. The synergistic effect of endophytes and nanoparticles in water remediation has been widely explored in recent studies, revealing compelling outcomes. Water pollution poses significant threats to human health, ecosystems, and economies; hence, the sixth global goal of the Sustainable Development Agenda 2030 of the United Nations aims to ensure the availability and sustainable management of water resources, recognizing their crucial importance for current and future generations. Conventional methods for addressing water pollution exhibit several limitations, including high costs, energy-intensive processes, the production of hazardous by-products, and insufficient effectiveness in mitigating emerging pollutants such as pharmaceuticals and microplastics. Noticeably, there is an inability to effectively remove various types of pollutants, thus resulting in incomplete purification cycles. Nanoparticle-enhanced water bioremediation offers an innovative, eco-friendly alternative for degrading contaminants. A growing body of research has shown that integrating endophytic microorganisms with nanoparticles for water bioremediation is a potent and viable alternative. This review examines the potential of using endophytic microorganisms and nanoparticles to enhance water remediation, exploring their combined effects and applications in water purification. The paper also provides an overview of synthetic methods for producing endophyte-nanoparticle composites to optimize their remediation capabilities in aqueous environments. The final section of the review highlights the constraints related to integrating endophytes with nanoparticles.

Occurrence, source identification and ecological risk assessment of heavy metals in water and sediments of Uchalli lake - Ramsar site, Pakistan

Uchalli Lake is an internationally significant Ramsar site that needs protection for supporting migratory birds. The current study aimed to assess wetland health by examining water and sediments utilizing total and labile heavy metals concentration, pollution indices, ecological risk assessment, water recharge and pollution induction sources through isotope tracer techniques. Al concentration in water was of serious concern as it was 440 times higher than the maximum acceptable concentration of Environmental Quality Standard of the UK for aquatic life in saline waters. Labile concentration predicted very severe enrichment of Cd, Pb, and moderate enrichment of Cu. Modified ecological risk index predicted very high ecological risk in sediments. The δ 18O, δ2H and D-excess values indicate that the lake was mainly recharged by local meteoric water. Enriched values of δ 18O and δ2H suggest a high evaporation of lake water, making lake sediments more enriched with metals. Isotopic and D-excess values of groundwater suggest a quick rainwater recharge to groundwater around the Uchalli Lake. Nitrates isotopes indicate that the rainwater runoff is main source of induction of fertilizers, pesticides and soil bonded metals in the lake system. The lake is recharged by rainwater runoff, from catchment areas, that erode the soil particles and agricultural residual waste dumped in the lake.

Modification of sugarcane bagasse with iron(III) oxide-hydroxide to improve its adsorption property for removing lead(II) ions

Lead contamination in wastewater results in toxicity of aquatic life and water quality, it is recommended to remove lead before discharging. Four sugarcane bagasse adsorbent materials of sugarcane bagasse powder (SB), sugarcane bagasse powder doped iron(III) oxide-hydroxide (SBF), sugarcane bagasse powder beads (SBB), and sugarcane bagasse powder doped iron(III) oxide-hydroxide beads (SBFB) were synthesized and characterized with various techniques. Their lead removal efficiencies were investigated by batch experiments on the effects of dose (0.1-0.6 g), contact time (1-6 h), pH (1, 3, 5, 7, 9, 11), and concentration (5-30 mg/L), adsorption isotherms, kinetics, and desorption experiments. All materials were amorphous phases presenting specific peaks of cellulose. SBB and SBFB detected sodium alginate peaks, and iron(III) oxide-hydroxide peaks were detected in SBF and SBFB. SB and SBF were scales or overlapping plate surfaces whereas SBB and SBFB had spherical shapes with coarse surfaces. The main functional groups of O-H, C=O, C-H, C-O, and C=C were observed in all materials, whereas Fe-O and -COOH were only found in materials with adding iron(III) oxide-hydroxide or bead material. The point of zero charges (pH_pzc) of all materials was higher than 4. The optimum conditions of SB, SBF, SBB, and SBFB with the highest lead removal efficiency at a lead concentration of 10 mg/L and pH 5 were 0.6 g and 6 h (96.08%), 0.2 g and 3 h (100%), 0.2 g and 2 h (98.22%), and 0. 1 g and 2 h (100%), respectively. Since SBFB spent less adsorbent dose and contact time than other materials with a lead removal efficiency of 100%, it was a more potential adsorbent than other materials. Thus, adding iron(III) oxide-hydroxide and changing material form helped to improve material efficiencies for lead adsorption. The maximum adsorption capacities of SB, SBF, SBB, and SBFB were 6.161, 27.027, 23.697, and 57.471 mg/L, respectively by fitting the Langmuir model. Langmuir isotherm was best fitted for SB and SBB, whereas the Freundlich model was best fitted for SBF and SBFB. The pseudo-second-order kinetic model was best fitted for all materials. Moreover, all adsorbents could be reused for more than 5 cycles with the lead removal efficiency of more than 73%. Therefore, SBFB was potential material to further apply for lead removal in industrial applications.

Recent Advances in Adsorptive Nanocomposite Membranes for Heavy Metals Ion Removal from Contaminated Water: A Comprehensive Review

Water contamination is one of the most urgent concerns confronting the world today. Heavy metal poisoning of aquatic systems has piqued the interest of various researchers due to the high toxicity and carcinogenic consequences it has on living organisms. Due to their exceptional attributes such as strong reactivity, huge surface area, and outstanding mechanical properties, nanomaterials are being produced and employed in water treatment. In this review, recent advances in the use of nanomaterials in nanoadsorptive membrane systems for wastewater treatment and heavy metal removal are extensively discussed. These materials include carbon-based nanostructures, metal nanoparticles, metal oxide nanoparticles, nanocomposites, and layered double hydroxide-based compounds. Furthermore, the relevant properties of the nanostructures and the implications on their performance for water treatment and contamination removal are highlighted. The hydrophilicity, pore size, skin thickness, porosity, and surface roughness of these nanostructures can help the water permeability of the nanoadsorptive membrane. Other properties such as surface charge modification and mechanical strength can improve the metal adsorption effectiveness of nanoadsorptive membranes during wastewater treatment. Various nanocomposite membrane fabrication techniques are also reviewed. This study is important because it gives important information on the roles of nanomaterials and nanostructures in heavy metal removal and wastewater treatment.