Revealing the Effect of MnO2, Activated Carbon and MnO2/Activated Carbon on Chitosan Polymer Host Fabricated Co NPs: Antibacterial Performance and Degradation of Organic Compounds

Unraveling the multifaceted mechanisms and untapped potential of activated carbon in remediation of emerging pollutants: A comprehensive review and critical appraisal of advanced techniques

The rapid global expansion of industrialization has resulted in the discharge of a diverse range of hazardous contaminants into the ecosystem, leading to extensive environmental contamination and posing a pressing ecological concern. In this context, activated carbon (AC) has emerged as a highly promising adsorbent, offering significant advantages over conventional forms. For instance, AC has demonstrated remarkable adsorption capabilities, as evidenced by the successful removal of atrazine and ibuprofen using KOH and KOH-CO2-activated char, achieving impressive adsorption rates of 90% and 95%, respectively, at an initial dosage of 10 mg L-1. Moreover, AC can effectively adsorb aromatic compounds through π-π stacking interactions. The aromatic rings in organic molecules can align and interact with the carbon atoms in AC's structure, leading to effective adsorption. In this review, by employing a systematic analysis of recent research findings (majorly from 2015 to 2023), an in-depth exploration of AC's evolution and its wide-ranging applications in adsorbing and remediating emerging pollutants, including dyes, organic contaminants, and hazardous gases and mitigating the adverse impacts of such emerging pollutants on ecosystems have been discussed. It serves as a valuable resource for researchers, professionals, and policymakers involved in environmental remediation and pollution control, facilitating the development of sustainable and effective strategies for mitigating the global impact of emerging pollutants.

Synthesis of oxidized carboxymethyl cellulose-chitosan and its composite films with SiC and SiC@SiO2 nanoparticles for methylene blue dye adsorption

The cationic methylene blue (MB) dye sequestration was studied by using oxidized carboxymethyl cellulose-chitosan (OCMC-CS) and its composite films with silicon carbide (OCMC-CS-SiC), and silica-coated SiC nanoparticles (OCMC-CS-SiC@SiO2). The resulting composite films were characterized through various analytical techniques, including Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Thermogravimetric analysis (TGA), Field emission scanning electron microscopy (FESEM), and energy-dispersive X-ray spectroscopy (EDS). The dye adsorption properties of the synthesized composite films were comprehensively investigated in batch experiments and the effect of parameters such as contact time, initial dye concentration, catalyst dosages, temperature, and pH were systematically evaluated. The results indicated that the film's adsorption efficiency was increased by increasing the contact time, catalyst amount, and temperature, and with a decreased initial concentration of dye solution. The adsorption efficiency was highest at neutral pH. The experimental results demonstrated that OCMC-CS films have high dye adsorption capabilities as compared to OCMC-CS-SiC, and OCMC-CS-SiC@SiO2. Additionally, the desorption investigation suggested that the adsorbents are successfully regenerated. Overall, this study contributes to the development of sustainable and effective adsorbent materials for dye removal applications. These films present a promising and environmentally friendly approach to mitigate dye pollution from aqueous systems.

Green Synthesis of Withania coagulans Extract-Mediated Zinc Oxide Nanoparticles as Photocatalysts and Biological Agents

Recently, biosynthesized nanoparticles (NPs) have played a vital role as an alternative to physical and chemical methods. Here, a distinctive bioinspired synthesis of zinc oxide nanoparticles (ZnO NPs) has been introduced using leaf extracts of Withania coagulans as the reducing agent by using distilled water and methanol. The synthesized catalysts were analyzed through ultraviolet-visible spectroscopy, dynamic light scattering, scanning electron microscopy, Fourier transform infrared, energy-dispersive X-ray analysis, and X-ray diffraction for NP synthesis, morphology, functional group, elemental composition, and peak crystallinity analysis. The phytochemical analysis of 2,2-diphenyl-1-picrylhydrazyl (DPPH), total flavonoid content, total alkaloid content, and total phenolic content of the crude methanolic extract of the plant was also performed, suggesting the greatest potential as the supporting material for ZnO NPs. The NPs were investigated for their catalytic efficiency in the degradation of dyes (rhodamine B dye) and against important human food-borne pathogens (Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli). ZnO NPs exhibited a strong catalytic activity in the degradation of dyes and against bacteria. The results also showed an enhanced activity of ZnO NPs of methanolic extract (ZnO-M) composites compared to zinc oxide of distilled water (ZnO-D). The % age degradation of the dye, Kapp, and linear relationship were obtained from pseudo-first-order kinetics. The highest reduction rate in 30 and 60 min was observed under sunlight by ZnO-M and ZnO-D, respectively. The rate constant Kapp for the reduction of the dye was 13.6 × 10-1 min-1 and 6.8 × 10-1 min-1, respectively (numerical values). For ZnO-M, ln(Kapp) ≈ 0.309. For ZnO-D, ln(Kapp) ≈ -0.385. These rate constants represent the degradation of the dye in the presence of ZnO-M and ZnO-D catalysts. In addition, NPs were found to be most active against S. aureus (18 mm in the case of ZnO-M and 15 mm in the case of ZnO-D) than P. aeruginosa and E. coli. The results suggested that the prepared ZnO NPs could be used in pharmaceutical industries as well as photocatalysts. ZnO-M had greater control over particle size and morphology, potentially resulting in smaller, more uniform NPs. ZnO-D achieved fine size control but not potentially better than that compared to organic solvents.

Facile synthesis of CuO/g-C3N4 nanolayer composites with superior catalytic reductive degradation behavior

The cupric oxide (CuO) loaded graphitic carbon nitride (g-C₃N₄) nanocomposites (CuO/g-C₃N₄) were prepared by a facile calcination method. The formation of monoclinic CuO nanocrystals along with g-C₃N₄ was confirmed by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopic analysis. X-ray photoelectron spectral (XPS) analysis further confirms the formation of CuO/g-C₃N₄. Distribution of CuO stone-like crystalline nanoparticles on g-C₃N₄ nanosheets was observed by transmission electron microscopic images. The influence of CuO loading on the optical property of g-C₃N₄ was determined by ultraviolet (UV)-visible absorption and photoluminescence (PL) spectral analysis. Band gap was decreased from 2.7 to 2.3 eV by the addition of CuO nanoparticles. The catalytic performance of the synthesized samples in 4-nitrophenol (4-NP) and methyl orange (MO) reduction was evaluated. The 5 wt% CuO/g-C₃N₄ showed 99.5% (7 min) and 99.7% (4 min) reduction efficiency for 4-NP and MO respectively. The 5 wt% CuO/g-C₃N₄ could become a potential catalyst in the chemical treatment of organic pollutants.

Excellent photocatalytic and antibacterial activities of bio-activated carbon decorated magnesium oxide nanoparticles

Green production of nanomaterials are restrict toxic substances and motivated the noxious free environment. Photocatalysis and antibacterial resistance are more promising and efficient fields for their chemical reductants and clean environment. Herein, we adopted a green and simple method for the biosynthesis of MgO NPs using Manilkara zapota as a bio source. Recently, the green synthesis of magnesium oxide nanoparticles has been a keen interest amongst researchers and scientists due to its simplicity eco-friendliness, non-toxic, inexpensive and potential to perform as an antibacterial agent. Activated carbon/Magnesium oxide (AC/MgO) photocatalyst was blended through a simple solution evaporation method. The surface electron microscopy (SEM) study reviles that AC/MgO had smooth and aggregated particles. The Fourier transform infrared (FT-IR) and x-ray diffraction (XRD) study confirms the structural formation and incorporation of nanoparticles into the AC matrix. Results confirmed the flourishing integration of MgO NPs over the activated carbon matrix. The electron movement and valency of AC/MgO photocatalyst reduced the bandgap and their findings were characterized by ultra visible diffuse reflectance spectroscopy (UV-DRS) and x-ray photoelectron spectroscopy (XPS). The blended AC/MgO photocatalyst was analyzed for photodegradation of Rhodamine- B (Rh-B) dye using a UV-visible spectrophotometer. The degradation study projects that the AC/MgO photocatalyst degrades (Rh-B) dye with 99% efficiency under simulated solar irradiation. This efficient degradation of (Rh-B) dye by AC/MgO photocatalyst is ascribed to the synergetic AC as catalytic support and adsorbent and MgO as photocatalyst. Finally, the photocatalytic material shows a better bactericidal effect in both gram-positive bacteria Escherichia coli-745 and gram-negative bacteria Staphylococcus aureus-9779. The AC/MgO photocatalyst is effectively used in bacteriocidal and photocatalytic removal of dyes and can be used for further development of water reuse and bio-medical fields. In addition, this research shows a viable method for synthesizing a cheap and effective AC/MgO for the photocatalytic destruction of organic pollutants.