An In Situ Experiment to Evaluate the Aging and Degradation Phenomena Induced by Marine Environment Conditions on Commercial Plastic Granules

Biodegradable microplastics aging processes accelerated by returning straw in paddy soil

Biodegradable microplastics (MPs) have been released into agricultural soils and inevitably undergo various aging processes. Straw return is a popular agricultural management strategy in many countries. However, the effect of straw return on the aging process of biodegradable MPs in flooded paddy soil, which is crucial for studying the characteristics, fate, and environmental implications of biodegradable MPs, remains unclear. Here, we constructed a 180-day microcosm incubation to elucidate the aging mechanism of polylactic acid (PLA)-MPs in straw-enriched paddy soil. This study elucidated that the prominent aging characteristic of PLA-MPs occurred in the straw-enriched paddy soil, accompanied by increased chrominance (76.64-182.3 %), hydrophilicity (2.92-22.07 %), roughness (33.12-58.01 %), and biofilm formation (42.12-100.3 %) for the PLA-MPs, especially with 2 % (w/w) straw return treatment (P < 0.05). A 2 % straw return treatment has significantly impacted ester CO group changes in PLA-MPs, altered the MPs-attached soil bacterial communities composition, strengthened bacterial network structure, and increased soil proteinase K activity. The findings of this work demonstrated that flooded, straw-enriched paddy soil accelerated PLA-MPs aging affected by soil-water chemistry, soil microbe, and soil enzymatic. This study helps to deepen our understanding of the aging process of PLA-MPs in straw return paddy soil. ENVIRONMENTAL IMPLICATION: Microplastics (MPs) are emerging contaminants in the global soil and terrestrial ecosystems. Biodegradable MPs are more likely to be formed and released into agricultural soils during aging. Straw return is a popular agricultural management strategy in many countries. Considering the wide use of plastic film, sewage sludge, plastic-coated fertilizer, and organic fertilizer in agricultural ecosystems, it is crucial to pay attention to the aging process of biodegradable MPs in straw-enriched paddy soil, which has not been adequately emphasized. This aspect has been overlooked in previous studies and threatens ecosystems. This study demonstrated that straw-enriched paddy soil accelerated polylactic acid (PLA)-MPs aging influenced by the dissolved organic matter, microorganisms, and enzyme activity associated with straw decomposition.

The comparative toxicity of biobased, modified biobased, biodegradable, and petrochemical-based microplastics on the brackish water flea Diaphanosoma celebensis

The escalating production and improper disposal of petrochemical-based plastics have led to a global pollution issue with microplastics (MPs), which pose a significant ecological threat. Biobased and biodegradable plastics are believed to mitigate plastic pollution. However, their environmental fate and toxicity remain poorly understood. This study compares the in vivo effects of different types of MPs, poly(butylene adipate-co-terephthalate) as a biodegradable plastic, polylactic acid (PLA) as a biobased plastic, β-cyclodextrin-grafted PLA as a modified biobased plastic, and low density polyethylene as the reference petrochemical-based plastic, on the key aquatic primary consumer Diaphanosoma celebensis. Exposure to MPs resulted in significant reproductive decline, with comparable effects observed irrespective of MP type or concentration. Exposure to MPs induced distinct responses in redox stress, with transcriptional profiling revealing differential gene expression patterns that indicate varied cellular responses to different types of MPs. ATP-binding cassette transporter activity assays demonstrated altered efflux activity, mainly in response to modified biobased and biodegradable MPs. Overall, this study highlights the comparable in vivo and in vitro effects of biobased, biodegradable, and petrochemical-based MPs on aquatic primary consumers, highlighting their potential ecological implications.

Degradation efficiency of biodegradable plastics in subtropical open-air and marine environments: Implications for plastic pollution

Bioplastics are increasingly used as a solution to tackle plastic pollution problems. However, their degradability in natural environments is currently under debate. To evaluate their degradation efficiencies, we conducted in-situ degradation experiments in an open-air and two marine environments in Hong Kong. Three groups of biodegradable plastic were tested, namely (1) additive-modified low-density polyethylene (LDPE), labelled as oxo-biodegradable or photodegradable plastics, (2) polylactic acid (PLA), and (3) polyvinyl alcohol (PVA)/starch blends. Most biodegradable plastics fail to completely degrade but remain visually present after six months of exposure. Only PLA is able to demonstrate 100 % disintegration in one to three months in marine settings, suggesting that subtropical marine environments may favor PLA degradation. Biodegradable plastics that are bio-based (PLA and PVA/Starch blends) show notably larger mass losses by 23-100 % than the fossil-based ones (modified-LDPE). Our results reveal higher degradation efficiencies of PLA and PVA/Cassava starch blend in marine than open-air settings (with mass losses larger by 50 %, and by 39-41 %, respectively), potentially via biodegradation and hydrolysis. Meanwhile, modified-LDPE and PVA/Corn starch blends in general show higher degradation efficiencies in open-air than marine settings (with mass losses larger by 2 %, and by 17-33 %, respectively), potentially via abiotic oxidation. Since all tested biodegradable plastics exhibit potential fragmentation signs, further investigation is needed to characterize the behaviours of the microplastics generated. The current labelling on biodegradable bags fails to provide comprehensive information regarding their actual environmental degradation behaviours, especially considering their fragmentation risk and limited degradation exhibited in this study. This highlights the imperative for improved messaging to ensure consumers are better informed about these products.

Weathering increases the acute toxicity of plastic pellets leachates to sea-urchin larvae-a case study with environmental samples

Microplastics, particles under 5 mm, pervade aquatic environments, notably in Tarragona's coastal region (NE Iberian Peninsula), hosting a major plastic production complex. To investigate weathering and yellowness impact on plastic pellets toxicity, sea-urchin embryo tests were conducted with pellets from three locations-near the source and at increasing distances. Strikingly, distant samples showed toxicity to invertebrate early stages, contrasting with innocuous results near the production site. Follow-up experiments highlighted the significance of weathering and yellowing in elevated pellet toxicity, with more weathered and colored pellets exhibiting toxicity. This research underscores the overlooked realm of plastic leachate impact on marine organisms while proposes that prolonged exposure of plastic pellets in the environment may lead to toxicity. Despite shedding light on potential chemical sorption as a toxicity source, further investigations are imperative to comprehend weathering, yellowing, and chemical accumulation in plastic particles.

Exploring the hidden environmental pollution of microplastics derived from bioplastics: A review

Bioplastics might be an ecofriendly alternative to traditional plastics. However, recent studies have emphasized that even bioplastics can end up becoming micro- and nano-plastics due to their degradation under ambient environmental conditions. Hence, there is an urgent need to assess the hidden environmental pollution caused by bioplastics. However, little is known about the evolutionary trends of bibliographic data, degradation pathways, formation, and toxicity of micro- and nano-scaled bioplastics originating from biodegradable polymers such as polylactic acid, polyhydroxyalkanoates, and starch-based plastics. Therefore, the prime objective of the current review was to investigate evolutionary trends and the latest advancements in the field of micro-bioplastic pollution. Additionally, it aims to confront the limitations of existing research on microplastic pollution derived from the degradation of bioplastic wastes, and to understand what is needed in future research. The literature survey revealed that research focusing on micro- and nano-bioplastics has begun since 2012. This review identifies novel insights into microbioplastics formation through diverse degradation pathways, including photo-oxidation, ozone-induced degradation, mechanochemical degradation, biodegradation, thermal, and catalytic degradation. Critical research gaps are identified, including defining optimal environmental conditions for complete degradation of diverse bioplastics, exploring micro- and nano-bioplastics formation in natural environments, investigating the global occurrence and distribution of these particles in diverse ecosystems, assessing toxic substances released during bioplastics degradation, and bridging the disparity between laboratory studies and real-world applications. By identifying new trends and knowledge gaps, this study lays the groundwork for future investigations and sustainable solutions in the realm of sustainable management of bioplastic wastes.

Differential scanning calorimetry (DSC): An important tool for polymer identification and characterization of plastic marine debris

Differential scanning calorimetry (DSC), a routine thermoanalytical method in material science, is gaining utility in plastic pollution research to improve polymer identification. We optimized a DSC method, experimentally testing pan types, temperature ramps, number of melts, and minimum sample masses. Using the optimized method, we created an in-house thermogram library from 201 polymer reference standards. We determined peak melting temperature cutoffs for differentiating variants of PE and nylon. PE cutoffs remained stable after experimentally weathering standards outdoors or for severely weathered HDPE debris found on Hawaii's beaches. Marine debris samples, across a range of weathering severity and previously identified as either low-density or high-density polyethylene (LDPE or HDPE) based on the 1377 cm-1 peak indicating methyl groups by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), were analyzed by DSC to confirm or challenge the ATR-FTIR PE differentiation. ATR-FTIR was correct for >80% of the HDPE samples, but <40% of those initially identified as LDPE by ATR-FTIR. Accuracy did not relate to weathering extent. Most samples mis-identified as LDPE were HDPE that had formed methyl groups likely from chain scission during photooxidation. ATR-FTIR alone is unreliable for differentiating weathered PE, DSC is required. We provide a multiple-method workflow for complete and accurate polymer identification, even for microplastics ≥0.03 mg. Applying these methods can better identify the polymer composition of marine debris, essential for sourcing and recycling efforts.

Microbial colonization patterns and biodegradation of petrochemical and biodegradable plastics in lake waters: insights from a field experiment

Introduction

Once dispersed in water, plastic materials become promptly colonized by biofilm-forming microorganisms, commonly known as plastisphere.

Methods

By combining DNA sequencing and Confocal Laser Scanning Microscopy (CLSM), we investigated the plastisphere colonization patterns following exposure to natural lake waters (up to 77 days) of either petrochemical or biodegradable plastic materials (low density polyethylene - LDPE, polyethylene terephthalate - PET, polylactic acid - PLA, and the starch-based MaterBi® - Mb) in comparison to planktonic community composition. Chemical composition, water wettability, and morphology of plastic surfaces were evaluated, through Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM), and static contact angle analysis, to assess the possible effects of microbial colonization and biodegradation activity.

Results and Discussion

The phylogenetic composition of plastisphere and planktonic communities was notably different. Pioneering microbial colonisers, likely selected from lake waters, were found associated with all plastic materials, along with a core of more than 30 abundant bacterial families associated with all polymers. The different plastic materials, either derived from petrochemical hydrocarbons (i.e., LDPE and PET) or biodegradable (PLA and Mb), were used by opportunistic aquatic microorganisms as adhesion surfaces rather than carbon sources. The Mb-associated microorganisms (i.e. mostly members of the family Burkholderiaceae) were likely able to degrade the starch residues on the polymer surfaces, although the Mb matrix maintained its original chemical structure and morphology. Overall, our findings provide insights into the complex interactions between aquatic microorganisms and plastic materials found in lake waters, highlighting the importance of understanding the plastisphere dynamics to better manage the fate of plastic debris in the environment.

Mitigating plastic pollution at sea: Natural seawater degradation of a sustainable PBS/PBAT marine rope

This paper evaluates the use of a PBS/PBAT biodegradable rope to reduce the environmental impact of fishing gear lost at sea. The study aims to better understand the degradation mechanisms that the rope and its monofilaments may encounter due to the long term exposure to seawater. The monofilaments were immersed in natural seawater for up to 18 months, and rope samples were also immersed to study aging at a larger scale and evaluate the ability of a modelling tool to predict initial and aged states of the rope. At low temperatures, no loss of properties was observed for the monofilament and rope. However, at higher temperatures, biodegradation and hydrolysis processes were observed, leading to a faster loss of properties in the monofilament compared to the rope. The modelling tool provided conservative predictions due to severe mechanical test conditions of aged monofilament and a degradation gradient within the rope structure.

Holes on surfaces of the weathered plastic fragments from coastal beaches

The surface morphology of weathered plastics undergoes a variety of changes. In this study, 3950 plastic fragments from 26 beaches around the world, were assessed to identify holes. Holes were identified on 123 fragments on 20 beaches, with the highest frequency (10.3 %) being identified at Qesm AL Gomrok Beach in Egypt. The distribution of holes could be divided into even, single-sided, and random types. The external and internal holes were similar in size (37 ± 15 μm) of even type fragments. The external holes were larger than the internal holes in single-sided (516 ± 259 μm and 383 ± 161 μm) and random (588 ± 262 μm and 454 ± 210 μm) fragment types. The external hole sizes were positively correlated with the internal hole sizes for each type. This study reports a novel deformation phenomenon on the surface of weathered plastics and highlights their potential effects on plastics.

The Smart Drifter Cluster: Monitoring Sea Currents and Marine Litter Transport Using Consumer IoT Technologies

The study of marine Lagrangian transport holds significant importance from a scientific perspective as well as for practical applications such as environmental-pollution responses and prevention (e.g., oil spills, dispersion/accumulation of plastic debris, etc.). In this regard, this concept paper introduces the Smart Drifter Cluster: an innovative approach that leverages modern "consumer" IoT technologies and notions. This approach enables the remote acquisition of information on Lagrangian transport and important ocean variables, similar to standard drifters. However, it offers potential benefits such as reduced hardware costs, minimal maintenance expenses, and significantly lower power consumption compared to systems relying on independent drifters with satellite communication. By combining low power consumption with an optimized, compact integrated marine photovoltaic system, the drifters achieve unlimited operational autonomy. With the introduction of these new characteristics, the Smart Drifter Cluster goes beyond its primary function of mesoscale monitoring of marine currents. It becomes readily applicable to numerous civil applications, including recovering individuals and materials at sea, addressing pollutant spills, and tracking the dispersion of marine litter. An additional advantage of this remote monitoring and sensing system is its open-source hardware and software architecture. This fosters a citizen-science approach, enabling citizens to replicate, utilize, and contribute to the improvement of the system. Thus, within certain constraints of procedures and protocols, citizens can actively contribute to the generation of valuable data in this critical field.

Weathering and degradation of polylactic acid masks in a simulated environment in the context of the COVID-19 pandemic and their effects on the growth of winter grazing ryegrass

The COVID-19 pandemic has led to explosive growth in the production and consumption of disposable medical masks, which has caused new global environmental problems due to the improper disposal of these masks and lack of effective mask recycling methods. To reduce the environmental load caused by the inability of synthetic plastics to degrade, polylactic acid (PLA) masks, as a biodegradable environmentally friendly plastic, may become a solution. This study simulated the actual degradation process of new PLA masks in different environments by soaking them in various solutions for 4 weeks and explored the influence of the treated PLA fabric fibers on the growth of winter ryegrass. The results show that the weathering degradation of PLA fibers in water mainly occurs through the hydrolysis of ester bonds, and weathering leads to cheese-like and gully-like erosion on the surface of the PLA fiber fabric layer and finally to fiber fracture and the release of microplastics (MPs). The average number of MPs released within 4 weeks is 149.5 items/piece, the particle size is 20-500 µm (44%), and 63.57% of the MPs are transparent fibers. The outer, middle, and inner layers of weathered PLA masks tend to be hydrophilic and have lower mechanical strength. PLA fibers after different treatment methods affect the growth of winter ryegrass. PLA masks are undoubtedly a greener choice than ordinary commercial masks, but in order to confirm this, the entire degradation process, the final products, and the impact on the environment need to be further studied. In the future, masks may be developed to be made from more environmentally friendly biodegradable materials that can have good protecting effects and also solve the problem of end-of-life recycling. A SYNOPSIS: Simulation of the actual degradation process of PLA masks and exploration of the influence of mask degradation on the growth of winter ryegrass.

Long-term immersion of compostable plastics in marine aquarium: Microbial biofilm evolution and polymer degradation

The best-selling compostable plastics, polylactic acid (PLA) and polybutylene adipate-co-terephthalate (PBAT), can accidentally end up in the marine environment due to plastic waste mismanagement. Their degradation and colonization by microbial communities are poorly documented in marine conditions. To better understand their degradation, as well as the dynamics of bacterial colonization after a long immersion time (99, 160, and 260 days), PBAT, semicrystalline, and amorphous PLA films were immersed in a marine aquarium. Sequencing and chemical analyses were used in parallel to characterize these samples. Despite the variation in the chemical intrinsic parameters of these plastics, their degradation remains very slow. Microbial community structure varied according to the immersion time with a high proportion of Archaea. Moreover, the plastisphere structure of PBAT was specific. A better understanding of compostable plastic degradability is crucial to evaluate their impact on ecosystems and to eco-design new recyclable plastics with optimal degradation properties.

A Biodegradable, Bio-Based Polymer for the Production of Tools for Aquaculture: Processing, Properties and Biodegradation in Sea Water

Bio-based, biodegradable polymers can dramatically reduce the carbon dioxide released into the environment by substituting fossil-derived polymers in some applications. In this work, prototypes of trays for aquaculture applications were produced via injection molding by using a biodegradable polymer, Mater-Bi^®. A characterization carried out via calorimetric, rheological and mechanical tests revealed that the polymer employed shows properties suitable for the production of tools to be used in aquaculture applications. Moreover, the samples were subjected to a biodegradation test in conditions that simulate the marine environment. The as-treated samples were characterized from gravimetrical, morphological and calorimetric point of views. The obtained data showed a relatively low biodegradation rate of the thick molded samples. This behavior is of crucial importance since it implies a long life in marine water for these manufacts before their disappearing.

Fourier Transform Infrared Spectroscopy to Assess the Degree of Alteration of Artificially Aged and Environmentally Weathered Microplastics

Fourier transform infrared (FTIR) is a spectroscopy technique widely used to identify organic materials. It has recently gained popularity in microplastic (MP) pollution research to determine the chemical composition of unknown plastic fragments. However, it could also be used to evaluate the degree of ageing of MPs collected from the environment. In this context, the principal aim of our research has been to qualitatively evaluate the natural weathering of environmental MPs collected in an Italian freshwater body (the Ofanto River) using ATR-FTIR technology. Furthermore, we compared environmental particles to weathered artificial MPs under controlled light and temperature conditions and to unaltered pristine materials to assess the results. FTIR spectra were acquired using a Nicolet Summit FTIR (ThermoFisher Scientific) equipped with an Everest ATR with a diamond Crystal plate and a DTGS KBr detector (wavenumber range 4000-500 cm^-1, 32 scans per spectrum, spectral resolution of 4 cm^-1). The degree of ageing was assessed using three different indexes known to be related to changes in MPs: Carbonyl Index (CI), Hydroxyl Index (HI), and Carbon-Oxygen Index (COI). The overall results showed that the regions reflecting changes (hydroxyl groups, peaks from 3100 to 3700 cm^-1, alkenes or carbon double bonds, 1600 and 1680 cm^-1, and carbonyl groups, 1690 and 1810 cm^-1) appeared significantly modified in artificial and natural weathered particles compared to the pristine materials. The indexes calculated for polymers degraded under the artificial photo and thermo ageing conditions displayed a general tendency to increase with the time in contact with irradiation time. Particular enhancements of CI of PS fragment and PE pellet, HI of PE and PS fragments and PE pellet, and COI of PS fragment were observed. Otherwise, the following incubation of the same particles at a constant temperature of 45 °C did not further affect the chemical composition of the particles. Moreover, new unique peaks were also observed in the freshwater particles, almost all in the fingerprint region (1500-500 cm^-1). Differences in CI, HI, and COI were evidenced among the different morphological MP shapes. On the one hand, the CI calculated for the environmental PE pellets showed values ranging from 0.05 to 0.26 with a mean value of 0.17 ± 0.10. Most samples (57%) presented a CI with values between 0.16 and 0.30. On the other hand, fragments presented slicer modifications in the carbonyl region with CI values lower than pellets (0.05 ± 0.05). This index helps evaluate the degradation of PE MPs by UV light, increasing with enhancing residence time in the environment. Conversely, fragments showed greater values of HI (5.90 ± 2.57) and COI (1.04 ± 0.48) than pellets, as well as lines, which presented the maximum value of HI (11.51). HI is attributed to the bond vibrations of hydroxyl, carboxyl, or phenol groups. In contrast, COI is frequently attributed to the vibrations of C_O bonds found in carbohydrates, alkanes, secondary alcohols, and ketones. In conclusion, our results showed characteristics spectra acquired from environmental particles compared to pristine and artificial aged ones. The interpretation of our main results emphasizes the need to conduct ecotoxicological experimental studies using naturally weathered particles due to the unicity of their properties, which are more helpful for understanding microplastic pollution effects.

Influence of Different Environments and Temperatures on the Photo-Oxidation Behaviour of the Polypropylene

The photo-oxidation of polypropylene at two different temperatures and in three different environments-air, distilled water and sea water-has been followed as a function of the irradiation time. The photo-oxidation kinetic is dramatically dependent on the amount of oxygen available for the oxidation reactions and on the temperature. While the photo-oxidation is very fast in air, the degradation is much slower in the two aqueous media. The degradation in sea water is slightly slower than in distilled water. In all cases, the degradation kinetic increases remarkably with the temperature. This behavior has been attributed to the lower oxygen availability for the oxidation reactions of the polymers. The light difference of the degradation kinetic between the two aqueous media depends on the small difference of the oxygen concentration at the test temperatures of 40 and 70 °C. At the latter temperature, the difference between the degradation kinetic in distilled water and sea water is still less important because increasing the temperature decreases the solubility of the oxygen, and it tends to became very similar in both samples of water.

Rapid Identification of Beached Marine Plastics Pellets Using Laser-Induced Breakdown Spectroscopy: A Promising Tool for the Quantification of Coastal Pollution

The rapid identification of beached marine micro-plastics is essential for the determination of the source of pollution and for planning the most effective strategies for remediation. In this paper, we present the results obtained by applying the laser-induced breakdown spectroscopy (LIBS) technique on a large sample of different kinds of plastics that can be found in a marine environment. The use of chemometric analytical tools allowed a rapid classification of the pellets with an accuracy greater than 80%. The LIBS spectrum and statistical tests proved their worth to quickly identify polymers, and in particular, to distinguish C-O from C-C backbone pellets, and PE from PP ones. In addition, the PCA analysis revealed a correlation between appearance (surface pellets roughness) and color (yellowing), as reported by other recent studies. The preliminary results on the analysis of metals accumulated on the surface of the pellets are also reported. The implication of these results is discussed in view of the possibility of frequent monitoring of the marine plastic pollution on the seacoast.