Polylactide/Carbon Black Segregated Composites for 3D Printing of Conductive Products

Fabrication and Characterization of PLA/PBAT Blends, Blend-Based Nanocomposites, and Their Supercritical Carbon Dioxide-Induced Foams

In this study, a twin-screw extruder was used to fabricate poly(lactic acid) (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) blends and blend-based nanocomposites with carbon nanotube (CNT) or nanocarbon black (CB) as nanofillers. The fabricated samples were subsequently treated with supercritical carbon dioxide (scCO2) to fabricate the corresponding foams. Bi-phasic morphology and selective distribution of CNTs or CBs in the PBAT phase were observed in the blends/composites through scanning electron microscopy. After the scCO2 treatment, the selective foaming of the PBAT phase in the prepared blends/composites was confirmed. The cellular structure of PBAT phase in scCO2-treated blends is similar to the size/shape of PBAT domains in untreated blends or treated neat PBAT foam. The addition of CNTs or CBs in the blends led to a slight reduction in cell size of the foamed PBAT phase, demonstrating CNT/CB-induced cell nucleation. Differential scanning calorimetry (DSC) results showed that CNTs and CBs played as nucleating agents and increased the initial crystallization temperature up to 14 °C compared with neat PBAT for PBAT in different composites during cooling. The scCO2 treatment induced the bimodal stability of PBAT crystals in different samples, which melted mainly in two temperature regions in DSC studies. Thermogravimetric analyses revealed that compared with parent blends, the addition of CNTs or CBs increased the temperature at 80 wt.% loss (degradation of PBAT portion) up to 6 °C. The electrical resistivity decreased by more than six orders of magnitude for certain CNT- or CB-added composites compared with the parent blends. The hardness of the blends slightly increased after forming the corresponding composites and then declined after the scCO2 treatment.

Comparison of PLLA-PEG and PDLLA-PEG micelles for co-encapsulation of docetaxel and resveratrol

The interest in combining chemosensitizers with cytostatics in cancer therapy is growing, which causes also a need to develop their delivery systems. Example of the combination with beneficial therapeutic effects is docetaxel (Dtx) and resveratrol (Res). Although poly(lactide)-co-poly(ethylene glycol) (PLA-PEG) micelles have been considered as one of the most promising platforms for drug delivery, their properties may depend on the stereoisomeric form of hydrophobic block. Therefore, the aim of this study was evaluation of the effect of PLA block on co-encapsulation and release rate of Dtx and Res, which has not been studied so far. This article presents a comparison of single- (Dtx or Res) and dual-drug (Dtx and Res) loaded micelles obtained from poly(l,l-lactide)-co-poly(ethylene glycol) (PLLA-PEG) and poly(d,l-lactide)-co-poly(ethylene glycol) (PDLLA-PEG). The analyzes of the micelles have been conducted including morphology, drug(s) encapsulation efficiency, intermolecular interactions, in vitro drug release, and cytotoxicity. Differences in drug loading ability and release profile have been observed between Res and Dtx but also depending on the polymer and number of drugs in micelles (single vs. dual loaded). The PLLA-PEG micelles have a significantly higher Dtx encapsulation capacity than PDLLA-PEG micelles. The highest cytotoxicity was shown for Dtx and Res dual-loaded micelles, regardless of the polymer. The findings may be used for selection of PLA-based drug delivery systems containing Dtx and Res.

Flexible Piezoresistive Polystyrene Composite Sensors Filled with Hollow 3D Graphitic Shells

The objective of this research was to develop highly effective conductive polymer composite (CPC) materials for flexible piezoresistive sensors, utilizing hollow three-dimensional graphitic shells as a highly conductive particulate component. Polystyrene (PS), a cost-effective and robust polymer widely used in various applications such as household appliances, electronics, automotive parts, packaging, and thermal insulation materials, was chosen as the polymer matrix. The hollow spherical three-dimensional graphitic shells (GS) were synthesized through chemical vapor deposition (CVD) with magnesium oxide (MgO) nanoparticles serving as a support, which was removed post-synthesis and employed as the conductive filler. Commercial multi-walled carbon nanotubes (CNTs) were used as a reference one-dimensional graphene material. The main focus of this study was to investigate the impact of the GS on the piezoresistive response of carbon/polymer composite thin films. The distribution and arrangement of GS and CNTs in the polymer matrix were analyzed using techniques such as X-ray diffraction and scanning electron microscopy, while the electrical, thermal, and mechanical properties of the composites were also evaluated. The results revealed that the PS composite films filled with GS exhibited a more pronounced piezoresistive response as compared to the CNT-based composites, despite their lower mechanical and thermal performance.

Effects of Accelerating the Ageing of 1D PLA Filaments after Fused Filament Fabrication

The effects of post-treatment temperature-based methods for accelerating the ageing of PLA were studied on 1D single-PLA filaments after fused filament fabrication (FFF). The goal was to answer the questions whether the PLA can be safely aged-i.e., without degrading-at higher temperatures; at which temperatures, if any; how long it takes for the PLA to fully age at the chosen temperature; and which are the main differences between the material aged at room temperature and the material aged at higher temperatures. We also share other helpful information found. The use of 1D filaments allows for decoupling the variables related to the 3D structure (layer height, raster angle, infill density, and layers adhesion) from the variables solely related to the material (here, we analysed the molecular weight, the molecular orientation, and the crystallinity). 1D PLA filaments were aged at 20, 39, 42, 51, 65, 75, and 80 °C in a water-bath-inspired process in which the hydrolytic degradation of the PLA was minimised for the ageing temperatures of interest. Those temperatures were selected based on a differential scanning calorimetry (DSC) scan of the PLA right after it was printed in order to study the most effective ageing temperature, 39 °C, and highlight possible degradation mechanisms during ageing. The evolution of the thermal and mechanical properties of the PLA filaments at different temperatures was recorded and compared with those of the material aged at room temperature. A DSC scan was used to evaluate the thermal and physical properties, in which the glass transition, enthalpic relaxation, crystallisation, and melting reactions were analysed. A double glass transition was found, and its potential implications for the scientific community are discussed. Tensile tests were performed to evaluate the tensile strength and elastic modulus. The flow-induced molecular orientation, the degradation, the logistic fitting, and the so-called summer effect-the stabilisation of properties at higher values when aged at higher temperatures-are discussed to assess the safety of accelerating the ageing rate and the differences between the materials aged at different temperatures. It was found that the PLA aged at 39 °C (1) reached almost stable properties with just one day of ageing, i.e., the ageing rate accelerated by 875% for the elastic modulus and by 1635% for the yield strength; (2) the stable properties were higher than those from the PLA aged at room temperature; and (3) no signs of degradation were identified for the ageing temperature of interest.