Optimization of Processing Conditions and Mechanical Properties for PEEK/PEI Multilayered Blends

Rotary Friction Welding of Polyetheretherketone Biopolymer Rods Using Variable Rotational Speed

Polyetheretherketone (PEEK) is a promising biomaterial due to its excellent mechanical properties. Most PPEK manufacturing methods include additive manufacturing, injection molding, grinding, pulse laser drilling, or incremental sheet forming. Rotary friction welding (RFW) is a promising bonding technique in many industries. However, very few studies have focused on the RFW of PEEK. Conventionally, the number of revolutions is fixed during the welding process. Remarkably, the rotary friction welding of PEEK polymer rods using an innovative variable rotational speed is investigated in this study. The average bending strength of the welded part using a three-stage transformation rotational speed was enhanced by about 140% compared with a rotational speed of 1000 rpm. The advantage of computer numerical controlled RFW of PEEK using variable rotational speed is a reduced cycle time of RFW. A reduction in cycle time of about 6% can be obtained using the proposed RFW with a three-stage transformation rotational speed. The innovative approach provides low environmental pollution and high energy efficiency and complies with sustainable development goals.

Effect of Polymer Matrix on Inelastic Strain Development in PI- and PEI-Based Composites Reinforced with Short Carbon Fibers under Low-Cyclic Fatigue

Since the inelastic strain development plays an important role in the low-cycle fatigue (LCF) of High-Performance Polymers (HPPs), the goal of the research was to study the effect of an amorphous polymer matrix type on the resistance to cyclic loading for both polyimide (PI)- and polyetherimide (PEI)-based composites, identically loaded with short carbon fibers (SCFs) of various lengths, in the LCF mode. The fracture of the PI and PEI, as well as their particulate composites loaded with SCFs at an aspect ratio (AR) of 10, occurred with a significant role played by cyclic creep processes. Unlike PEI, PI was less prone to the development of creep processes, probably because of the greater rigidity of the polymer molecules. This increased the stage duration of the accumulation of scattered damage in the PI-based composites loaded with SCFs at AR = 20 and AR = 200, causing their greater cyclic durability. In the case of SCFs 2000 µm long, the length of the SCFs was comparable to the specimen thickness, causing the formation of a spatial framework of unattached SCFs at AR = 200. The higher rigidity of the PI polymer matrix provided more effective resistance to the accumulation of scattered damage with the simultaneously higher fatigue creep resistance. Under such conditions, the adhesion factor exerted a lesser effect. As shown, the fatigue life of the composites was determined both by the chemical structure of the polymer matrix and the offset yield stresses. The essential role of the cyclic damage accumulation in both neat PI and PEI, as well as their composites reinforced with SCFs, was confirmed by the results of XRD spectra analysis. The research holds the potential to solve problems related to the fatigue life monitoring of particulate polymer composites.