Chitosan-Based Self-Healing Hydrogel: From Fabrication to Biomedical Application

4D printing polymeric biomaterials for adaptive tissue regeneration

4D printing polymeric biomaterials can change their morphology or performance in response to stimuli from the external environment, compensating for the shortcomings of traditional 3D-printed static structures. This paper provides a systematic overview of 4D printing polymeric biomaterials for tissue regeneration and provides an in-depth discussion of the principles of these materials, including various smart properties, unique deformation mechanisms under stimulation conditions, and so on. A series of typical polymeric biomaterials and their composites are introduced from structural design and preparation methods, and their applications in tissue regeneration are discussed. Finally, the development prospect of 4D printing polymeric biomaterials is envisioned, aiming to provide innovative ideas and new perspectives for their more efficient and convenient application in tissue regeneration.

Design and biofabrication of barnacle and spider silk protein decorated composite bacterial cellulose for diabetic wound healing

Delayed healing of wounds in diabetics is mainly due to tissue inflammation, poor vasculature, lack of neovascularization, and bacterial infection. Therefore, a therapeutic protocol that disrupts this cycle and speeds healing is urgently needed. Despite attempts to enhance wound dressing effectiveness through hydrogels with diverse complexes such as bacterial cellulose (BC) combined with chitosan, BC/ chitosan/hyaluronic acid, and BC/chitosan/collagen, the toughness and adhesion properties of hydrogel remain constrained, leading to inadequate and uncontrollable wound healing. To address the challenge, we have devised an innovative solution by integrating barnacle cement protein (cp19k) and spider silk protein (major ampullate spidroin 1, MaSp1) into a BC matrix, complemented by chitosan. This development has led to the creation of a novel BC-based composite hydrogel BC/cp19k-MaSp1/C150k. The composite hydrogel stands out with its remarkable mechanical (3.92 Mpa) and adhesion properties (8.4 kPa) compared to its BC/C150k counterpart. Meanwhile, the BC/cp19k-MaSp1/C150k hydrogel also demonstrated antimicrobial activity, coagulation, and biocompatibility. The BC/cp19k-MaSp1/C150k hydrogel showed an exceptional capacity to enhance wound healing in a diabetic rat model, achieving a significant wound closure rate of over 98 % on day 14 when compared to BC and commercially available dressing 3 M™ Tegaderm™. This advancement holds significant promise in revolutionizing wound management for diabetics.

Mechanochemistry-Induced Universal Hydrogel Surface Modification for Orientation and Enhanced Differentiation of Skeletal Muscle Myoblasts

Micropatterned surface substrates containing topographic cues offer the possibility of programming tissue organization as a cell template by guiding cell alignment, adhesion, and function. In this study, we developed and used a force stamp method to grow aligned micropatterns with tunable chemical properties and elasticity on the surface of hydrogels based on a force-triggered polymerization mechanism of double-network hydrogels to elucidate the underlying mechanisms by which cells sense and respond to their mechanical and chemical microenvironments. In this work, we describe the impact of aligned micropatterns on the combined effects of microstructural chemistry and mechanics on the selective adhesion, directed migration, and differentiation of myoblasts. Our investigations revealed that topographically engineered substrates with hydrophobic and elevated surface roughness significantly enhanced myoblast adhesion kinetics. Concurrently, spatially ordered architectures facilitated cytoskeletal reorganization in myocytes, establishing biomechanically favorable niches for syncytial myotube development through extracellular matrix (ECM) physical guidance. Reverse transcription PCR analysis and immunofluorescence revealed that the expression of differentiation-specific genes, myosin heavy chain, and myogenic regulatory factors Myf5 and MyoD was upregulated in muscle cells on the aligned patterned scaffolds. These results suggest that the aligned micropatterns can promote muscle cell differentiation, making them potential scaffolds for enhancing skeletal differentiation.

Chitosan-based structures for skin repair: A literature review

The use of chitosan in technological and biomedical applications has gained significant relevance due to its functional properties. Among its biological activities, its hemostatic, analgesic, antibacterial and anti-inflammatory activities make this natural biopolymer one of the most promising in the development of structures for skin repair. Its application and effects can be optimized by exploring efficient structuring techniques. In this context, this review is based on scientific evidence reported in the last decade regarding the development and use of chitosan-based structures in the skin repair process to show the most common structuring methods, the main mechanisms of action of chitosan, and its potential applications in skin repair processes. Additionally, this article brings a compilation of scientific and commercial works on the use of chitosan-based structures, in addition to vitro and/or in vivo results.

A pH-responsive dual-network biopolysaccharide hydrogel with enhanced self-healing and controlled drug release properties

Traditional hydrogels based on Schiff base reactions frequently encounter issues with rapid drug release when employed as drug delivery systems owing to their susceptibility to hydrolysis under acidic conditions. It is, therefore, necessary to implement improvements to regulate the drug release behavior. In this study, a dual-network and pH-responsive biopolysaccharide hydrogel was developed, which is self-healing, injectable and biocompatible. Most importantly, the hydrogel has excellent tunability for controlled drug release. The hydrogel consisted of a primary network of dibenzaldehyde-functionalized poly(ethylene glycol) (DP) and chitosan (CS) formed through a Schiff base reaction and a secondary network of sodium alginate (SA) and CS formed through electrostatic interactions. It was found that the DP-CS-2%SA hydrogel can prolong the release duration up to four-fold compared to the single-network DP-CS hydrogel at a given release threshold. Significantly, by adjusting the relationship between the two effects through the amount of SA, the release modifiability of drug delivery systems has been greatly enhanced. This study could significantly enhance the tunability of hydrogel drug delivery systems.

Progress in the Application of Hydrogels in Intervertebral Disc Repair: A Comprehensive Review

PURPOSE OF REVIEW

Intervertebral disc degeneration (IVDD) is a common orthopaedic disease and an important cause of lower back pain, which seriously affects the work and life of patients and causes a large economic burden to society. The traditional treatment of IVDD mainly involves early pain relief and late surgical intervention, but it cannot reverse the pathological course of IVDD. Current studies suggest that IVDD is related to the imbalance between the anabolic and catabolic functions of the extracellular matrix (ECM). Anti-inflammatory drugs, bioactive substances, and stem cells have all been shown to improve ECM, but traditional injection methods face short half-life and leakage problems.

RECENT FINDINGS

The good biocompatibility and slow-release function of polymer hydrogels are being noticed and explored to combine with drugs or bioactive substances to treat IVDD. This paper introduces the pathophysiological mechanism of IVDD, and discusses the advantages, disadvantages and development prospects of hydrogels for the treatment of IVDD, so as to provide guidance for future breakthroughs in the treatment of IVDD.

Integrative Modeling and Experimental Insights into 3D and 4D Printing Technologies

This review focuses on advancements in polymer science as it relates to three-dimensional (3D) and four-dimensional (4D) printing technologies, with a specific emphasis on applications in the biomedical field. While acknowledging the breadth of 3D and 4D printing applications, this paper concentrates on the use of polymers in creating biomedical devices and the challenges associated with their implementation. It explores integrative modeling and experimental insights driving innovations in these fields, focusing on sustainable manufacturing with biodegradable polymers, a comparative analysis of 3D and 4D printing techniques, and applications in biomedical devices. Additionally, the review examines the materials used in both 3D and 4D printing, offering a detailed comparison of their properties and applications. By highlighting the transformative potential of these technologies in various industrial and medical applications, the paper underscores the importance of continued research and development. The scope of this review also includes an overview of future research directions to address current challenges, enhance material capabilities, and explore practical applications.

Medical Applications and Cellular Mechanisms of Action of Carboxymethyl Chitosan Hydrogels

Carboxymethyl chitosan (CMCS) hydrogels have been investigated in biomedical research because of their versatile properties that make them suitable for various medical applications. Key properties that are especially valuable for biomedical use include biocompatibility, tailored solid-like mechanical characteristics, biodegradability, antibacterial activity, moisture retention, and pH stimuli-sensitive swelling. These features offer advantages such as enhanced healing, promotion of granulation tissue formation, and facilitation of neutrophil migration. As a result, CMCS hydrogels are favorable materials for applications in biopharmaceuticals, drug delivery systems, wound healing, tissue engineering, and more. Understanding the interactions between CMCS hydrogels and biological systems, with a focus on their influence on cellular behavior, is crucial for leveraging their versatility. Because of the constantly growing interest in chitosan and its derivative hydrogels in biomedical research and applications, the present review aims to provide updated insights into the potential medical applications of CMCS based on recent findings. Additionally, we comprehensively elucidated the cellular mechanisms underlying the actions of these hydrogels in medical settings. In summary, this paper recapitulates valuable data gathered from the current literature, offering perspectives for further development and utilization of carboxymethyl hydrogels in various medical contexts.

Bioengineering approaches for the endometrial research and application

The endometrium undergoes a series of precise monthly changes under the regulation of dynamic levels of ovarian hormones that are characterized by repeated shedding and subsequent regeneration without scarring. This provides the potential for wound healing during endometrial injuries. Bioengineering materials highlight the faithful replication of constitutive cells and the extracellular matrix that simulates the physical and biomechanical properties of the endometrium to a larger extent. Significant progress has been made in this field, and functional endometrial tissue bioengineering allows an in-depth investigation of regulatory factors for endometrial and myometrial defects in vitro and provides highly therapeutic methods to alleviate obstetric and gynecological complications. However, much remains to be learned about the latest progress in the application of bioengineering technologies to the human endometrium. Here, we summarize the existing developments in biomaterials and bioengineering models for endometrial regeneration and improving the female reproductive potential.

A Sol-Gel Transition and Self-Healing Hydrogel Triggered via Photodimerization of Coumarin

Reversible chemical covalency provides a path to materials that can degrade and recombine with appropriate stimuli and which can be used for tissue regeneration and repair. However, designing and preparing efficient and quickly self-healing materials has always been a challenge. The preparation strategies of photoresponsive gels attract a lot of attention due to their precise spatial and temporal control and their predetermined response to light stimulation. In this work, the linear copolymer PAC was synthesized via precipitation polymerization of acrylic acid and 7-(2-acrylate-ethoxylated)-4-methylcoumarin. The coumarin groups on the copolymer PAC side chains provide a reversible chemical cross-linking via photostimulation, which achieves reversible regulation of the gel network structure. The concentration of 18 wt% PAC solution produces gelation under irradiation with 365 nm. In contrast, PAC gel is restored to soluble copolymers under irradiation with 254 nm. Meanwhile, the mechanical and self-healing properties of the gel were also explored. It is demonstrated that the cracks of the gel can be repaired simply, quickly, and efficiently. Furthermore, the PAC copolymer shows an excellent adhesion property based on the reversible sol-gel transition. Thus, the PAC gel has considerable potential for applications in engineering and biomedical materials.

Application of the Quality by Design Concept (QbD) in the Development of Hydrogel-Based Drug Delivery Systems

Hydrogel-based drug delivery systems are of interest to researchers for many reasons, such as biocompatibility, high diversity, and the possibility of administration from different routes. Despite these advantages, there are challenges, such as controlling the drug release rate and their mechanical properties during the manufacturing of these systems. For this reason, there is a need for the production and development of such drug delivery systems with a scientific strategy. For this reason, the quality by design (QbD) approach is used for the development of drug delivery systems. This approach, by identifying the most effective factors in the manufacturing of pharmaceutical products and controlling them, results in a product with the desired quality with the least number of errors. In this review article, an attempt is made to discuss the application and method of applying this approach in the development of hydrogel-based drug delivery systems. So that for the development and production of these systems, according to the type of drug delivery system, what target characteristics should be considered (QTPP) and what factors, such as material properties (CMA) or process parameters (CPP), should be taken into account to reach the critical quality attributes of the product (CQA).