Casein Films: The Effects of Formulation, Environmental Conditions and the Addition of Citric Pectin on the Structure and Mechanical Properties

Sustainable and durable color cosmetics: riboflavin phosphate-mediated photo-crosslinked casein films with tannic acid

The cosmetics industry is increasingly focusing on developing sustainable and environmentally friendly products while maintaining high performance. In color cosmetics, achieving long-lasting durability of water-soluble dyes remains a challenge. This study presents a sustainable approach to enhance the durability of water-soluble dyes in cosmetics using biopolymer-based films. The casein films were fabricated through riboflavin phosphate (RFP)-mediated photo-crosslinking, with tannic acid (TA) incorporated to improve mechanical properties. The fabrication process, characterization, and performance evaluation of the biopolymer-based films were investigated. Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) analyses confirmed the successful crosslinking and formation of a porous network structure. Rheological measurements revealed that the incorporation of TA significantly enhanced the mechanical strength of the films. Cytocompatibility assessment using NIH/3T3 fibroblasts demonstrated the films' excellent biocompatibility. The durability and color retention of a water-soluble red dye in the biopolymer-based films were evaluated on human skin. The films formed under blue light irradiation exhibited superior dye retention compared to non-irradiated films, with TA addition providing a minor improvement in durability. This study bridges the gap between cosmetic science and biomaterials research, providing a foundation for future investigations into bio-interactive materials for dermal applications. These findings highlight the potential of RFP-mediated photo-crosslinked casein films as a sustainable and effective solution for enhancing the durability of water-soluble dyes in color cosmetics.

Study of the Preparation and Properties of Chemically Modified Materials Based on Rapeseed Meal

In recent years, there has been increasing interest in developing novel materials based on natural biopolymers as a renewable alternative to petroleum-based plastics. The availability of proteins derived from agricultural by-products, along with their favourable properties, has fostered a renewed interest in protein-based materials, promoting research in innovative technologies. In this study, we propose the use of rapeseed protein-rich meal as the main ingredient for the preparation of novel sustainable materials combining excellent environmental properties such as biodegradability and renewability. The application of sustainable products in the present high-tech society requires the modification of the basic native properties of these natural compounds. The original route proposed in this paper consists of preparation via the compression moulding of flexible biomaterials stabilized by crosslinkers/chain extenders. An investigation of the effects of different denaturing and disulfide bond reducing agents, crosslinkers, and preparation conditions on the material mechanical behaviour demonstrated that the novel materials have appreciable strength and stiffness. The results show the potential of utilizing full meal from vegetable by-products to prepare protein-based materials with guaranteed ecofriendly characteristics and mechanical properties adequate for specific structural applications.

Protein-Based Packaging Films in Food: Developments, Applications, and Challenges

With the emphasis placed by society on environmental resources, current petroleum-based packaging in the food industry can no longer meet people's needs. However, new active packaging technologies have emerged, such as proteins, polysaccharides, and lipids, in which proteins are widely used for their outstanding gel film-forming properties. Most of the current literature focuses on research applications of single protein-based films. In this paper, we review the novel protein-based packaging technologies that have been used in recent years to categorize different proteins, including plant proteins (soybean protein isolate, zein, gluten protein) and animal proteins (whey protein isolate, casein, collagen, gelatin). The advances that have recently been made in protein-based active packaging technology can be understood by describing protein sources, gel properties, molding principles, and applied research. This paper presents the current problems and prospects of active packaging technology, provides new ideas for the development of new types of packaging and the expansion of gel applications in the future, and promotes the development and innovation of environmentally friendly food packaging.

Physicochemical and sensorial properties of tomato leathers at different drying conditions

Tomato leather as a healthy alternative to traditional fruit leathers was formulated. A tray dryer with changing temperature (50, 60, and 70°C) and relative humidity (5%, 10%, and 20%) was used to achieve the best product in terms of color, water distribution, lycopene content, mechanical, and sensorial properties. Color change was the highest at 70°C due to the Maillard reaction. Lycopene content was also the highest at 70°C. Time domain-NMR relaxometry showed that water distribution of all samples was homogeneous and similar to each other. Processing conditions affected mechanical properties significantly. The highest tensile strength was observed at 70°C, possibly due to the denatured proteins. Sensory analysis indicated better flavor development at 70°C, whereas overall acceptability of samples was higher at 50°C. The results of this study showed the main processing parameters of tomato leather with a minimal amount of ingredients, with acceptable mechanical and sensorial properties. PRACTICAL APPLICATION: Tomato leather was produced by using minimal amount of ingredients. Taste of the leather was found acceptable, as a salty snack food. Therefore, this product can be produced economically and it has a high potential to be consumed as an alternative to conventional fruit leathers.

Development and Physicochemical Characterization of Edible Chitosan-Casein Hydrogel Membranes for Potential Use in Food Packaging

The increasing global concern over plastic waste and its environmental impact has led to a growing interest in the development of sustainable packaging alternatives. This study focuses on the innovative use of expired dairy products as a potential resource for producing edible packaging materials. Expired milk and yogurt were selected as the primary raw materials due to their protein and carbohydrate content. The extracted casein was combined with various concentrations of chitosan, glycerol, and squid ink, leading to the studied samples. Chitosan was chosen due to its appealing characteristics, including biodegradability, and film-forming properties, and casein was utilized for its superior barrier and film-forming properties, as well as its biodegradability and non-toxic nature. Glycerol was used to further improve the flexibility of the materials. The prepared hydrogels were characterized using various instrumental methods, and the findings reveal that the expired dairy-based edible packaging materials exhibited promising mechanical properties comparable to conventional plastic packaging and improved barrier properties with zero-oxygen permeability of the hydrogel membranes, indicating that these materials have the potential to effectively protect food products from external factors that could compromise quality and shelf life.

Advances in transglutaminase cross-linked protein-based food packaging films; a review

Pushed by the environmental pollution and health hazards of plastic packaging, the development of biodegradable food packaging films (FPFs) is a necessary and sustainable trend for social development. Most protein molecules have excellent film-forming properties as natural polymer matrices, and the assembled films have excellent barrier properties, but show defects such as low water resistance and poor mechanical properties. In order to improve the performance of protein-based films, transglutaminase (TG) is used as a safe and green cross-linking (CL) agent. This work covers recent developments on TG cross-linked protein-based FPFs, mainly comprising proteins of animal and plant origin, including gelatin, whey protein, zein, soy proteins, bitter vetch protein, etc. The chemical properties and reaction mechanism of TG are briefly introduced, focusing on the effects of TG CL on the physicochemical properties of different protein-based FPFs, including barrier properties, water resistance, mechanical properties and thermal stability. It is concluded that the addition of TG can significantly improve the physical and mechanical properties of protein-based films, mainly improving their water resistance, barrier, mechanical and thermal properties. It is worth noting that the effect of TG on the properties of protein-based films is not only related to the concentration of TG added, but also related to CL temperature and other factors. Moreover, TG can also be used in combination with other strategies to improve the properties of protein-based films.

Cross-linked biopolymeric films by citric acid for food packaging and preservation

There is a growing interest in the development of degradable and biopolymeric food packaging films (BFPFs) based on green ingredients and strategies due to their biocompatibility, sustainability, and renewable nature of bio-materials. The performance of BFPFs can be improved either by modifying the biopolymer molecules or by combining them with various additives, including nanomaterials, cross-linkers, bioactive compounds and other polymers. Among them, green cross-linking technology is considered as an effective method to improve the performance of BFPFs; citric acid (CA) is widely used as a natural green cross-linker in different BFPFs. In this study, after an overview on CA chemistry, different types of BFPFs cross-linked by CA have been discussed. In addition, this work summarizes the application of CA cross-linked BFPFs/coatings for food preservation in recent years. The role of CA as a cross-linking agent differs in various types of biopolymers, i.e. polysaccharide-based, protein-based and biopolyester-based biopolymers. Moreover, the cross-linking of CA with different biopolymer molecules is mainly related to the CA content and reaction state; the cross-linking process is significantly influenced by conditions such as temperature and pH. In conclusion, this work shows that CA as a natural green cross-linking agent could improve the performance of different BFPFs and enhance their food preservation capacity.

Biobased polymer resources and essential oils: a green combination for antibacterial applications

To fight nosocomial infections, the excessive use of antibiotics has led to the emergence of multidrug-resistant microorganisms, which are now considered a relevant public health threat by the World Health Organization. To date, most antibacterial systems are based on the use of petro-sourced polymers, but the global supplies of these resources are depleting. Besides, silver NPs are widely accepted as the most active biocide against a wide range of bacterial strains but their toxicity is an issue. The growing interest in natural products has gained increasing interest in the last decade. Therefore, the design of functional antibacterial materials derived from biomass remains a significant challenge for the scientific community. Consequently, attention has shifted to naturally occurring substances such as essential oils (EOs), which are classified as Generally Recognized as Safe (GRAS). EOs can offer an alternative to the common antimicrobial agents as an inner solution or biocide agent to inhibit the resistance mechanism. Herein, this review not only aims at providing developments in the antibacterial modes of action of EOs against various bacterial strains and the recent advances in genomic and proteomic techniques for the elucidation of these mechanisms but also presents examples of biobased polymer resource-based EO materials and their antibacterial activities. Especially, we describe the antibacterial properties of biobased polymers, e.g. cellulose, starch, chitosan, PLA PHAs and proteins, associated with EOs (cinnamon (CEO), clove (CLEO), bergamot (BEO), ginger (GEO), lemongrass (LEO), caraway (CAEO), rosemary (REO), Eucalyptus globulus (EGEO), tea tree (TTEO), orange peel (OPEO) and apricot (Prunus armeniaca) kernel (AKEO) essential oils). Finally, we discuss the influence of EOs on the mechanical strength of bio-based materials.

Encapsulation of Lactobacillus rhamnosus GG in edible electrospun mats from calcium and sodium caseinates with pullulan blends

Electrospinning has been proposed as a method to encapsulate and preserve bioactive compounds in nanofibrous mats to ensure their delivery and associated health benefits when consumed directly or added to a food formulation. In previous work, we demonstrated the production of edible fibers to form mats of both calcium (CaCAS) and sodium (NaCAS) caseinate-pullulan (PUL), with the polysaccharide PUL added as a carrier to facilitate molecular entanglement for fiber formation. In this study, we determined the viability of the probiotic bacteria, Lactobacillus rhamnosus GG (LGG), used as a model bacterium, in mats of CaCAS-PUL and NaCAS-PUL. Electrospinning of aqueous solutions at room temperature (21 ± 1°C) of 15% (wt/wt) CaCAS and NaCAS mixed with 15% (wt/wt) PUL, with a 1:1 ratio of CAS:PUL, resulted in fibrous mats with average fiber diameter sizes of 233 ± 20 and 244 ± 21 nm, respectively, as determined by scanning electron microscopy. Addition of LGG in the amounts of 9.3 and 9.0 log₁₀ cfu/mL to the CaCAS-PUL and NaCAS-PUL solutions before electrospinning resulted in average fiber diameter sizes of 212 ± 14 and 286 ± 16 nm, respectively. The LGG was found to be distributed within the CaCAS-PUL and NaCAS-PUL fibers. The addition of LGG increased the shear viscosity and conductivity of the CaCAS-PUL solution, enhancing molecular entanglement and resulting in thinner fibers. For NaCAS, LGG increased the conductivity but reduced shear viscosity. Adjustment of the NaCAS-PUL composition would be needed to optimize conditions for thinner fibers. The numbers of viable LGG recovered from the CaCAS-PUL and NaCAS-PUL nanofibrous mats after electrospinning were 9.5 and 9.6 log₁₀ cfu/g, respectively, proving that the electrospinning conditions used were capable of supporting probiotic encapsulation. These results demonstrate that food-grade electrospun fibrous mats can be used to develop functional foods with delivery of probiotics to improve human or animal health.

Biodegradable active packaging: Components, preparation, and applications in the preservation of postharvest perishable fruits and vegetables

The consumption of fresh fruits and vegetables is restricted by the susceptibility of fresh produce to deterioration caused by postharvest physiological and metabolic activities. Developing efficient preservation strategies is thus among the most important scientific issues to be urgently addressed in the field of food science. The incorporation of active agents into a polymer matrix to prepare biodegradable active packaging is being increasingly explored to mitigate the postharvest spoilage of fruits and vegetables during storage. This paper reviews the composition of biodegradable polymers and the methods used to prepare biodegradable active packaging. In addition, the interactions between bioactive ingredients and biodegradable polymers that can lead to plasticizing or cross-linking effects are summarized. Furthermore, the applications of biodegradable active (i.e., antibacterial, antioxidant, ethylene removing, barrier, and modified atmosphere) packaging in the preservation of fruits and vegetables are illustrated. These films may increase sensory acceptability, improve quality, and prolong the shelf life of postharvest products. Finally, the challenges and trends of biodegradable active packaging in the preservation of fruits and vegetables are discussed. This review aims to provide new ideas and insights for developing novel biodegradable active packaging materials and their practical application in the preservation of postharvest fruits and vegetables.

Preparation and Physiochemical Characterization of Bitter Orange Oil Loaded Sodium Alginate and Casein Based Edible Films

Biopolymers-based composite edible films are gaining interest in the food packaging industry due to their sustainable nature and diverse biological activities. In the current study, we used sodium alginate (SA) and casein (CA) for the fabrication of composite film using the casting method. We also added orange oil to the edible film and assessed its impact on the biological, chemical, physical, and barrier properties of the films. The fabricated films were analyzed using X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). It was observed that CA-SA films loaded with 1.5% OEO had better visual attributes, and a further increase in oil concentration was not found to be as favorable. Mechanical assessment of the films revealed that CA-SA-OEO (1.5%) film showed lower puncture deformation and higher puncture force values. XRD data showed that all samples exhibited peaks at similar positions (21° of 2θ) with different intensities. In FTIR analysis, characteristic peaks of the film components (sodium alginate, casein, and orange oil) were reported at corresponding positions. The thermal stability of films was enhanced after the addition of the OEO (1.5%), however, a greater increase in OEO caused a decrease in the thermal stability, observed during TGA analysis. Moreover, the surface of the blank CA-SA film (FL1) was found to be rough (with cracks) compared to CA-SA films (FL2) containing 1.5% OEO. Additionally, FL2 was found to be relatively better than the other samples in terms of swelling degree (SD), thickness, water solubility (WS), oxygen permeability (OP), water vapor permeability (WVP), moisture content (MC), and transparency (T).

Functional property optimization of sodium caseinate-based films incorporating functional compounds from date seed co-products using response surface methodology

Novel sodium caseinate films incorporating furfural and date seed oil (DSO) were produced. The effects of furfural and DSO contents on the functional and physical properties of the composite films were assessed using response surface methodology.

A Comparative Evaluation of Sustainable Binders for Environmentally Friendly Carbon-Based Supercapacitors

Environmentally friendly energy storage devices have been fabricated by using functional materials obtained from completely renewable resources. Gelatin, chitosan, casein, guar gum and carboxymethyl cellulose have been investigated as sustainable and low-cost binders within the electrode active material of water-processable symmetric carbon-based supercapacitors. Such binders are selected from natural-derived materials and industrial by-products to obtain economic and environmental benefits. The electrochemical properties of the devices based on the different binders are compared by using cyclic voltammetry, galvanostatic charge/discharge curves and impedance spectroscopy. The fabricated supercapacitors exhibit series resistance lower than a few ohms and values of the specific capacitance ranged between 30 F/g and 80 F/g. The most performant device can deliver ca. 3.6 Wh/kg of energy at a high power density of 3925 W/kg. Gelatin, casein and carboxymethyl cellulose-based devices have shown device stability up to 1000 cycles. Detailed analysis on the charge storage mechanisms (e.g., involving faradaic and non-faradaic processes) at the electrode/electrolyte interface reveals a pseudocapacitance behavior within the supercapacitors. A clear correlation between the electrochemical performances (e.g., cycle stability, capacitance retention, series resistance value, coulombic efficiency) ageing phenomena and charge storage mechanisms within the porous carbon-based electrode have been discussed.

Casein Micelles as an Emerging Delivery System for Bioactive Food Components

Bioactive food components have potential health benefits but are highly susceptible for degradation under adverse conditions such as light, pH, temperature and oxygen. Furthermore, they are known to have poor solubilities, low stabilities and low bioavailabilities in the gastrointestinal tract. Hence, technologies that can retain, protect and enable their targeted delivery are significant to the food industry. Amongst these, microencapsulation of bioactives has emerged as a promising technology. The present review evaluates the potential use of casein micelles (CMs) as a bioactive delivery system. The review discusses in depth how physicochemical and techno-functional properties of CMs can be modified by secondary processing parameters in making them a choice for the delivery of food bioactives in functional foods. CMs are an assembly of four types of caseins, (α_s1, α_s2, β and κ casein) with calcium phosphate. They possess hydrophobic and hydrophilic properties that make them ideal for encapsulation of food bioactives. In addition, CMs have a self-assembling nature to incorporate bioactives, remarkable surface activity to stabilise emulsions and the ability to bind hydrophobic components when heated. Moreover, CMs can act as natural hydrogels to encapsulate minerals, bind with polymers to form nano capsules and possess pH swelling behaviour for targeted and controlled release of bioactives in the GI tract. Although numerous novel advancements of employing CMs as an effective delivery have been reported in recent years, more comprehensive studies are required to increase the understanding of how variation in structural properties of CMs be utilised to deliver bioactives with different physical, chemical and structural properties.

Active Casein Coatings and Films for Perishable Foods: Structural Properties and Shelf-Life Extension

There is an urgent need to increase the food supplies to fulfil the demands of future generations as the population of the world is expected to grow beyond 10 billion by 2050. An essential component for ensuring global food security is to reduce food losses during the post-harvest stage. Active edible coatings and films are a promising sustainable preservation technology for shelf-life extension of food products by hindering decay kinetics of minimally processed fruits and vegetables (F&V), by restricting the mass transfer of moisture, aroma, or gases and carrying an active compound, such as an antioxidant or antimicrobial. Active protein-based coatings and films have the potential to extend the shelf-life of food products by decreasing their respiration rates, as they exhibit an excellent gas barrier and good mechanical properties as compared to other biopolymeric packaging. Among protein-based biopolymers, casein and its derivatives as packaging films have been extensively studied due to their low cost, complete biodegradability, and availability. Currently, there is no review study focusing on caseinate-based active coating and film, thus, this review aims to give insights on the composition, rheology, structure, and properties of caseinate-based formulations by critically discussing the results presented in the literature. A methodological approach was followed to obtain relevant literature to discuss the influence of additives on the shelf-life of F&V. Furthermore, changes in secondary structure of casein were observed after incorporation of bioactive compounds (i.e., phenolic acids). Likewise, there is a need to explore chemical interactions among bioactive compounds and biopolymer material by using in silico and laboratory trials as food additives have shown to influence the physicochemical properties of film and shelf-life of food products.

Approaches in Animal Proteins and Natural Polysaccharides Application for Food Packaging: Edible Film Production and Quality Estimation

Natural biopolymers are an interesting resource for edible films production, as they are environmentally friendly packaging materials. The possibilities of the application of main animal proteins and natural polysaccharides are considered in the review, including the sources, structure, and limitations of usage. The main ways for overcoming the limitations caused by the physico-chemical properties of biopolymers are also discussed, including composites approaches, plasticizers, and the addition of crosslinking agents. Approaches for the production of biopolymer-based films and coatings are classified according to wet and dried processes and considered depending on biopolymer types. The methods for mechanical, physico-chemical, hydration, and uniformity estimation of edible films are reviewed.

Edible Coating and Pulsed Light to Increase the Shelf Life of Food Products

The application of edible coatings (EC) in combination with pulsed light (PL) treatments represents an emerging approach for extending the shelf life of highly perishable but high value-added products, such as fresh-cut fruits and vegetables. The surface of these products would benefit from the protective effects of ECs and the PL decontamination capability. This review describes in detail the fundamentals of both EC and PL, focusing on the food engineering principles in the formulation and application of EC and the delivery of efficient PL treatments and the technological aspects related to the food characterization following these treatments and discussing the implementation of the two technologies, individually or in combination. The advantages of the combination of EC and PL are extensively discussed emphasizing the potential benefits that may be derived from their combination when preserving perishable foods. The downsides of combining EC and PL are also presented, with specific reference to the potential EC degradation when exposed to PL treatments and the screening effect of PL transmittance through the coating layer. Finally, the potential applications of the combined treatments to food products are highlighted, comparatively presenting the treatment conditions and the product shelf-life improvement.

Application of Protein-Based Films and Coatings for Food Packaging: A Review

As the IV generation of packaging, biopolymers, with the advantages of biodegradability, process ability, combination possibilities and no pollution to food, have become the leading food packaging materials. Biopolymers can be directly extracted from biomass, synthesized from bioderived monomers and produced directly by microorganisms which are all abundant and renewable. The raw materials used to produce biopolymers are low-cost, some even coming from agrion dustrial waste. This review summarized the advances in protein-based films and coatings for food packaging. The materials studied to develop protein-based packaging films and coatings can be divided into two classes: plant proteins and animal proteins. Parts of proteins are referred in this review, including plant proteins i.e., gluten, soy proteins and zein, and animal proteins i.e., casein, whey and gelatin. Films and coatings based on these proteins have excellent gas barrier properties and satisfactory mechanical properties. However, the hydrophilicity of proteins makes the protein-based films present poor water barrier characteristics. The application of plasticizers and the corresponding post-treatments can make the properties of the protein-based films and coatings improved. The addition of active compounds into protein-based films can effectively inhibit or delay the growth of microorganisms and the oxidation of lipids. The review also summarized the research about the storage requirements of various foods that can provide corresponding guidance for the preparation of food packaging materials. Numerous application examples of protein-based films and coatings in food packaging also confirm their important role in food packaging materials.

Tuning the mechanical and physicochemical properties of cross-linked protein films

Films derived from natural sources such as proteins provide an advantage over synthetic films due to their noncytotoxicity, biodegradability, and vast functionality. A new protein source gained from the cataractous eye protein isolate (CEPI) obtained after surgery has been investigated for this purpose. Glycerol has been employed as the plasticizer and glutaraldehyde (GD) as a cross-linker. Fourier transform infrared spectroscopy was employed to characterize the films. Nanoindentation and thermogravimetric analyses reveal improved mechanical and thermal properties of the cross-linked films. The films with 20% (w/w) GD exhibited properties such as the highest modulus and low water solubility. It is possible to tune the properties based on the extent of cross-linking. All the films were completely degraded by the enzyme trypsin. The similarity of these films was checked by using the prepared films as a delivery vehicle for a model compound, ampicillin sodium. The encapsulation efficiency was found to be 74%, and in vitro release studies showed significant amounts of drug release at physiological pH. This study will help us understand how the properties of protein films can be tuned to obtain the desired physicochemical properties. These biodegradable protein films could find use in pharmaceutical industries as delivery carriers.

A Protein-Based Material from a New Approach Using Whole Defatted Larvae, and Its Interaction with Moisture

A protein-based material created from a new approach using whole defatted larvae of the Black Soldier fly is presented. The larvae turn organic waste into their own biomass with high content of protein and lipids, which can be used as animal feed or for material production. After removing the larva lipid and adding a plasticizer, the ground material was compression molded into plates/films. The lipid, rich in saturated fatty acids, can be used in applications such as lubricants. The amino acids present in the greatest amounts were the essential amino acids aspartic acid/asparagine and glutamic acid/glutamine. Infrared spectroscopy revealed that the protein material had a high amount of strongly hydrogen-bonded β-sheets, indicative of a highly aggregated protein. To assess the moisture⁻protein material interactions, the moisture uptake was investigated. The moisture uptake followed a BET type III moisture sorption isotherm, which could be fitted to the Guggenheim, Anderson and de Boer (GAB) equation. GAB, in combination with cluster size analysis, revealed that the water clustered in the material already at a low moisture content and the cluster increased in size with increasing relative humidity. The clustering also led to a peak in moisture diffusivity at an intermediate moisture uptake.