The Poly(acrylonitrule-co-acrylic acid)-graft-β-cyclodextrin Hydrogel for Thorium(IV) Adsorption

Synthesis of ion exchange film based on chemical grafting of styrene onto polyethylene/EPDM rubber blend for thorium removal

Chemical grafting of low-density polyethylene film blended with ethylene propylene diene monomer rubber (PE/EPDM) using styrene monomer followed by a sulfonation process was investigated. Different factors affecting the grafting process, such as monomer and initiator concentrations, time of reaction, and grafting temperature, were studied. Sulfonation of the grafted films was carried out using chlorosulfonic acid in dichloromethane. Characterization of the grafted and sulfonated films was performed using ATR-FTIR, SEM, TGA, and XRD instruments. The grafting was successfully performed in aqueous media using sodium bisulfite as initiator, reaching a grafting yield of 130% and an ion exchange capacity of 1.2 meq/g. The removal of thorium ions from aqueous solution was studied using the obtained ion exchange films. The results showed that the maximum adsorption capacity of Th(IV) was 177.5 mg. g-1 (pH = 3, 298 K and 60 min). Removal isotherm and Kinetics were investigated, and the results revealed that the adsorption process was chemisorption homogeneous monolayer adsorption, exothermic, and spontaneous.

Cyclodextrin embedded covalently crosslinked networks: synthesis and applications of hydrogels with nano-containers

Recent advancements in the synthesis of hydrogels containing cyclodextrin (CD) units within the gel network have been reviewed.

Preparation of Amidoxime-Functionalized β-Cyclodextrin-Graft-(Maleic Anhydride-co-Acrylonitrule) Copolymer and Evaluation of the Adsorption and Regeneration Properties of Uranium

The β-cyclodextrin-graft-(maleic anhydride-co-acrylonitrule) copolymer (β-CD-g-(MAH-co-AN)) synthesized through radical polymerization reactions of β-cyclodextrin (β-CD) with maleic anhydride (MAH) and acrylonitrule (AN) in the special monomer proportion, chemically modify with amidoxime groups to obtained the new adsorbent, which was terms as amidoxime-functionalized β-cyclodextrin-graft-(maleic anhydride-co-acrylonitrule) copolymer (β-CD-g-(MAH-co-AO)). Based on the characteristic results of Fourier transform infrared spectra (FTIR), scanning electron microscopy (SEM), X-ray Diffraction (XRD), and thermalgravity analysis (TGA) techniques, the grafted nitrile groups were successfully converted to amidoxime groups by reaction with hydroxylamine. In this report, the influence of different factors such as pH value and ionic strength, solid-liquid ratio, contact time, initial U(VI) concentration, and temperature on adsorption was investigated by a batch adsorption experiment. The adsorption process fitting results show that the adsorption followed the Langmuir isotherm model and the maximum adsorption capacity was 0.747 g/g at pH 4.0. In addition, the regeneration performance was investigated by varying the concentration of eluent, temperature, and contact time. Under the desorption condition of 0.10 M HNO₃, the adsorbents can be reused 12 times in the case that the adsorption capacity was not significantly reduced. The functionalized copolymer exhibits high selectivity under circumstance of other co-existing ions is present in the solution.