1
|
Kaur R, Pensia L, Kumar R. Bragg degenerate model for fabrication of holographic waveguide-based near-eye displays. APPLIED OPTICS 2023; 62:3467-3476. [PMID: 37132848 DOI: 10.1364/ao.485971] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
The coupling efficiency of light beams is a crucial factor for waveguide displays. Generally, the light beam is not coupled with maximum efficiency in the holographic waveguide without employing a prism in the recording geometry. Use of prisms in recording geometry leads to restricting the propagation angle of the waveguide to a specific value only. The issue of efficient coupling of a light beam without using prisms could be overcome via Bragg degenerate configuration. In this work, the simplified expressions of the Bragg degenerate case are obtained for the realization of normally illuminated waveguide-based displays. Using this model, by tuning the parameters of recording geometry, a range of propagation angles can be produced for a fixed normal incidence of a playback beam. Numerical simulations and experimental investigations of the Bragg degenerate waveguides of different geometries are performed to validate the model. A Bragg degenerate playback beam is successfully coupled in four waveguides recorded with different geometries and yields good diffraction efficiency at normal incidence. The quality of transmitted images is characterized using the structural similarity index measure. The augmentation of a transmitted image in the real world is experimentally demonstrated through the fabricated holographic waveguide for near-eye display applications. Bragg degenerate configuration can provide flexibility in the angle of propagation while maintaining the same coupling efficiency achievable with a prism for holographic waveguide displays.
Collapse
|
2
|
Gallego S, Puerto D, Morales-Vidal M, Ramirez MG, Taleb SI, Hernández A, Ortuño M, Neipp C. Tunable Waveguides Couplers Based on HPDLC for See-Through Applications. Polymers (Basel) 2021; 13:polym13111858. [PMID: 34204947 PMCID: PMC8199899 DOI: 10.3390/polym13111858] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/11/2021] [Revised: 05/26/2021] [Accepted: 06/02/2021] [Indexed: 11/16/2022] Open
Abstract
Photopolymers have become an important recording material for many applications, mainly related to holography. Their flexibility to change the chemical composition together with the optical properties made them a versatile holographic recording material. The introduction of liquid crystal molecules in a photopolymer based on multifunctional monomer provides us the possibility to generate tunable holograms. The switchable holographic elements are a key point for see-through applications. In this work, we optimize the holographic polymer-dispersed liquid crystals composition to improve the performance of tunable waveguide couplers based on transmission gratings and specifically their response under an applied electric field. A variation around 60% in the transmission efficiency was achieved.
Collapse
|
3
|
Shen Z, Weng Y, Zhang Y, Wang C, Liu A, Li X. Holographic Recording Performance of Acrylate-Based Photopolymer under Different Preparation Conditions for Waveguide Display. Polymers (Basel) 2021; 13:polym13060936. [PMID: 33803646 PMCID: PMC8078166 DOI: 10.3390/polym13060936] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/19/2021] [Revised: 03/11/2021] [Accepted: 03/16/2021] [Indexed: 11/25/2022] Open
Abstract
This work proposes a green light-sensitive acrylate-based photopolymer. The effects of the preparation conditions for the waveguide applied volume holographic gratings (VHGs) were experimentally investigated. The optimum preparation conditions for holographic recording were revealed. After optimization, the peak of VHG diffraction efficiency reached 99%, the diffractive wavelength bandwidth increased from 13 nm to 22 nm, and the corresponding RIM was 0.06. To prove the wide application prospect of the acrylate-based photopolymer in head-mounted augmented reality (AR) displays, green monochromatic volume holographic waveguides were fabricated. The display results showed that the prototype was able to achieve a 28° diagonal FOV and possessed a system luminance of 300 cd/m2.
Collapse
|
4
|
Analysis of the Imaging Characteristics of Holographic Waveguides Recorded in Photopolymers. Polymers (Basel) 2020; 12:polym12071485. [PMID: 32635228 PMCID: PMC7408443 DOI: 10.3390/polym12071485] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2020] [Revised: 06/30/2020] [Accepted: 07/01/2020] [Indexed: 11/17/2022] Open
Abstract
In this work, we study the imaging characteristics of an optical see-through display based on a holographic waveguide. To fabricate this device, two transmission holograms are recorded on a photopolymer material attached to a glass substrate. The role of the holograms is to couple the incident light between air and the glass substrate, accomplishing total internal reflection. The role of noise reflection gratings and shrinkage on the imaging characteristics of the device will be also explored. The holograms (slanted transmission gratings with a spatial frequency of 1690 lines/mm) were recorded on a polyvinyl alcohol acrylamide holographic polymer dispersed liquid crystal (HPDLC) material. We will show that sufficient refractive index modulation is achieved in the material, in order to obtain high diffraction efficiencies. We will demonstrate that the final device acts as an image formation system.
Collapse
|
5
|
Complex Diffractive Optical Elements Stored in Photopolymers. Polymers (Basel) 2019; 11:polym11121920. [PMID: 31766539 PMCID: PMC6960652 DOI: 10.3390/polym11121920] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2019] [Revised: 11/15/2019] [Accepted: 11/17/2019] [Indexed: 11/17/2022] Open
Abstract
We study the recording of complex diffractive elements, such as achromatic lenses, fork gratings or axicons. Using a 3-D diffusion model, previously validated, we are able to predict the behavior of photopolymer during recording. The experimental recording of these complex elements is possible thanks to a new generation spatial light modulator capable of generating periodic and aperiodic profiles. Both experimental and theoretical are analyzed and compared. The results show not only the good response of theoretical model to predict the behavior of the materials, but also the viability of photopolymers to store these kind of elements.
Collapse
|
6
|
Semkin A, Sharangovich S. Holographic Formation of Non-uniform Diffraction Structures by Arbitrary Polarized Recording Beams in Liquid Crystal-photopolymer Compositions. Polymers (Basel) 2019; 11:polym11050861. [PMID: 31083580 PMCID: PMC6571608 DOI: 10.3390/polym11050861] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2019] [Revised: 05/04/2019] [Accepted: 05/09/2019] [Indexed: 11/16/2022] Open
Abstract
In this work, the theoretical model of non-uniform diffraction structures’ holographic formation in liquid crystal-photopolymer (LC-PPM) composite materials with a dye-sensitizer is developed. The model takes into account the arbitrary character of amplitude and phase spatial distributions of recording light field, its arbitrary polarization state and also a non-linearity of the recording process. Two the most common types of liquid crystal-photopolymer composite are investigated: Holographic polymer-dispersed liquid crystals (H-PDLC) and polymer-stabilized liquid crystals (PSLC). Numerical simulations for the most common cases of holographic formation schemes are made. It is shown that due to the photo-induced Freedericksz transition, in the case of arbitrary polarization states of recording light beams, the non-uniform polarization diffraction grating (PDG) is formed in LC-PPM. Numerical simulations’ results show that PDG’s contribution to the change of the dielectric tensor of the media is comparable with the contribution of the photopolymerization-diffusion process.
Collapse
Affiliation(s)
- Artem Semkin
- Department of Microwave and Quantum Radio Engineering, Tomsk State University of Control Systems and Radioelectronics, 634050, Tomsk, Russia.
| | - Sergey Sharangovich
- Department of Microwave and Quantum Radio Engineering, Tomsk State University of Control Systems and Radioelectronics, 634050, Tomsk, Russia.
| |
Collapse
|
7
|
Mora MP, Ramírez MG, Brocal F, Ortuño M, Beléndez A, Pascual I. Influence of Tert-Butylthiol and Tetrahydrofuran on the Holographic Characteristics of a Polymer Dispersed Liquid Crystal: A Research Line Toward a Specific Sensor for Natural Gas and Liquefied Petroleum Gas. Polymers (Basel) 2019; 11:E254. [PMID: 30960238 PMCID: PMC6419087 DOI: 10.3390/polym11020254] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/26/2018] [Revised: 01/18/2019] [Accepted: 01/24/2019] [Indexed: 12/04/2022] Open
Abstract
Tert-Butylthiol (TBT) and tetrahydrothiophene (THT) are odorant substances added to natural gas and liquefied petroleum gas to help their detection by the human smell. In this research, TBT and THT are incorporated into a holographic polymer-dispersed liquid crystal and their influence in the main holographic characteristics of the photopolymer are studied in order to open the way towards the design of a holographic sensor to detect natural gas and liquefied petroleum gas.
Collapse
Affiliation(s)
- María P Mora
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, Apartado 99, 03080 Alicante, Spain.
- Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal, Universidad de Alicante, Apartado 99, E03080 Alicante, Spain.
| | - Manuel G Ramírez
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, Apartado 99, 03080 Alicante, Spain.
- Departamento de Óptica, Farmacología y Anatomía, Universidad de Alicante, Apartado 99, E03080 Alicante, Spain.
| | - Francisco Brocal
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, Apartado 99, 03080 Alicante, Spain.
- Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal, Universidad de Alicante, Apartado 99, E03080 Alicante, Spain.
| | - Manuel Ortuño
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, Apartado 99, 03080 Alicante, Spain.
- Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal, Universidad de Alicante, Apartado 99, E03080 Alicante, Spain.
| | - Augusto Beléndez
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, Apartado 99, 03080 Alicante, Spain.
- Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal, Universidad de Alicante, Apartado 99, E03080 Alicante, Spain.
| | - Inmaculada Pascual
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, Apartado 99, 03080 Alicante, Spain.
- Departamento de Óptica, Farmacología y Anatomía, Universidad de Alicante, Apartado 99, E03080 Alicante, Spain.
| |
Collapse
|
8
|
Fernández R, Bleda S, Gallego S, Neipp C, Márquez A, Tomita Y, Pascual I, Beléndez A. Holographic waveguides in photopolymers. OPTICS EXPRESS 2019; 27:827-840. [PMID: 30696163 DOI: 10.1364/oe.27.000827] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/10/2018] [Accepted: 11/13/2018] [Indexed: 06/09/2023]
Abstract
The possibilities that offer the holographic optical elements for photovoltaic and "see through display" applications open new windows for holographic recording materials. In this sense, some specific characteristics are required for each particular application. Waveguides are one of the key elements for these applications. Photopolymers are one of the most competitive candidates for waveguide fabrication. In this work, we evaluate the performance of one example from each of three families of photopolymer material in fabrication of a 633nm waveguide. Firstly, polyvinyl alcohol acrylamide, PVA/AA, the second one, a nanoparticle-thiol-ene, NPC, and on the last place a penta/hexa-acrylate based polymer with dispersed nematic liquid crystal molecules, PDLC. We study the critical role of the material and in particular, spatial resolution for this application.
Collapse
|
9
|
Bleda S, Francés J, Gallego S, Márquez A, Neipp C, Pascual I, Beléndez A. Numerical Analysis of H-PDLC Using the Split-Field Finite-Difference Time-Domain Method. Polymers (Basel) 2018; 10:E465. [PMID: 30966499 PMCID: PMC6415371 DOI: 10.3390/polym10050465] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/04/2018] [Revised: 04/19/2018] [Accepted: 04/23/2018] [Indexed: 11/16/2022] Open
Abstract
In this work, an accurate numerical modeling of the diffraction properties of transmission holographic polymer dispersed liquid crystal (H-PDLC) gratings is presented. The method considers ellipsoid geometry-based liquid crystal (LC) droplets with random properties regarding size and location across the H-PLDC layer and also the non-homogeneous orientation of the LC director within the droplet. The direction of the LC director inside the droplets can be varied to reproduce the effects of the external voltage applied in H-PDLC-based gratings. From the LC director distribution in the droplet, the permittivity tensor is defined, which establishes the optical anisotropy of the media, and it is used for numerically solving the light propagation through the system. In this work, the split-field finite-difference time-domain method (SF-FDTD) is applied. This method is suited for accurately analyzing periodic media, and it considers spatial and time discretisation of Maxwell's equations. The scheme proposed here is used to investigate the influence on the diffraction properties of H-PDLC as a function of the droplets size and the bulk fraction of LC dispersed material.
Collapse
Affiliation(s)
- Sergio Bleda
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
- Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
| | - Jorge Francés
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
- Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
| | - Sergi Gallego
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
- Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
| | - Andrés Márquez
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
- Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
| | - Cristian Neipp
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
- Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
| | - Inmaculada Pascual
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
- Departamento de Óptica, Anatomía y Farmacología, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
| | - Augusto Beléndez
- Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
- Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal, Universidad de Alicante, P.O. Box 99, E-03080 Alicante, Spain.
| |
Collapse
|