Mechanism of Acetyl Salicylic Acid (Aspirin) Degradation under Solar Light in Presence of a TiO2-Polymeric Film Photocatalyst

Visible Light Photocatalytic Degradation of Methylene Blue Dye and Pharmaceutical Wastes over Ternary NiO/Ag/TiO2 Heterojunction

Ternary NiO/Ag/TiO2 heterojunction photocatalyst was prepared by deposition coprecipitation for visible light photocatalytic applications. Physicochemical properties of the synthesized NiO/Ag/TiO2 composite were characterized by X-ray diffraction, Brunauer-Emmett-Teller surface area measurement method, transmission electron microscopy, energy-dispersive X-ray spectroscopy techniques, X-ray photoelectron spectroscopy technique, and ultraviolet-visible absorption spectroscopy. The results suggest that the well-dispersed small metallic silver nanoparticles (<3 nm) facilitate electron transfer and bridge nickel oxide and titanium oxide. The photocatalytic degradation and the methylene blue (MB) dye kinetics were carried out on a ternary NiO/Ag/TiO2 composite and compared to bare TiO2 under visible light irradiation. The results indicate that NiO/Ag/TiO2 has superior MB photodegradation efficiency with a high reaction rate constant and low degradation time (93.15% within 60 min) compared to Ag/TiO2, NiO/TiO2, and bare TiO2. NiO/Ag/TiO2 nanocomposite was also investigated for the most common pharmaceutical waste degradation and exhibited excellent degradation efficiency. The enhancement of the composite's performance could be attributed to the surface plasmonic resonance of the Ag nanoparticles, the formation of Schottky junctions at the Ag-TiO2 and Ag-NiO interface, and the p-n heterojunction between NiO and TiO2. Ag NPs act as a photosynthesizer and a photocatalyst, facilitate electron transfer, shift the absorption to the visible light region, reduce the band gap of TiO2, suppress the electron-hole recombination, and enhance the photocatalytic activity and stability as a result.

Acmella oleracea induced nanostructured Ca2Fe2O5 for evaluation of photo catalytic degradation of cardiovascular drugs and bio toxicity

Biosynthesis of nanoparticles is increasingly becoming popular due to the demand for sustainable technologies worldwide. In the present investigation, Acmella oleracea plant extract fuelled combustion technique followed by calcination at 600 °C was adopted to prepare nanocrystalline Ca₂Fe₂O₅. The prepared nano compound was characterised using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Ultra Violet (UV) spectroscopy, Infrared (IR) spectroscopy and its role was assessed for photocatalytic pollutant degradation along with bactericidal action in the concentration range of 1 μg/mL to 320 μg/mL. The photocatalytic degradation efficiency of pollutant drugs Clopidogrel Bisulphate and Asprin used for cardiovascular disorders is around 80% with 10 mg/L photocatalyst. The results showed that the photocatalytic activity increased with rising pH from 4, to 10, along with a significant antibacterial action against Enterococcus faecalis bacteria and a slight cytotoxic effect at high concentrations. The antibacterial property was reinforced by Minimum inhibitory concentrations (MIC) and Minimum bactericidal concentrations (MBC) studies with an average value of 0.103 at 600 nm which was further proved by significant anti-biofilm activeness. Adhesion tests in conjunction with cryogenic-scanning electron microscopy displayed a morphological change through agglomeration that caused an expansion in nano particles from 181 nm to 223.6 nm due to internalization followed by inactivation of bacteria. In addition, the non-toxicity of nano Ca₂Fe₂O₅ was confirmed by subtle cytological changes in microscopic images of Allium Cepa root cells in the concentration range 0.01-100 μg/mL and a slight inhibition in HeLa cell proliferation indicated by IC₅₀ value of 170.94 μg/mL. In total, the current investigation for the first time reveals the application of bio based synthesis of Nano Ca₂Fe₂O₅ to new possibilities in bioremediation namely degrading cardiovascular pharmaceutical pollutants, endodontic antibacterial action and cytological activity.

Pharmaceutical compounds photolysis: pH influence

The operating parameters of photolytic and photocatalytic reaction processes directly affect the efficiency in the degradation of compounds. In particular, pH is a variable that needs to be considered as it exerts great influence on adsorption, absorption, solubility, among others. This study describes the application of the photolytic process, at different pHs, in the degradation of different pharmaceutical compounds. Photolytic reactions were performed with the following contaminants: acetylsalicylic acid (ASA), ibuprofen (IBP) and paracetamol (PAR). In addition, a comparison was performed using the commercial catalyst P25. The results indicated a great influence of the pH in the kinetic constant of the photodegradation and in the UV absorbance of the species. In particular, the degradation of ASA and PAR were favored with the reduction of pH, while the degradation of IBU and SA were favored by increasing. Also, the chromatograms indicated that pH may affect the by-products formed. In comparison, the photocatalysis process in the presence of P25 proved to be much more effective, but it was not possible to achieve complete mineralization of the compounds.

Base-metal oxide semiconductor electrodes for PPCP degradation: Ti-doped α-Fe2O3 for sulfosalicylic acid oxidation as an example

Sulfosalicylic acid is a typical pharmaceutical and personal care product with high toxicity, environmental persistence, and low biodegradability. Electrochemical oxidation has been demonstrated to be a promising way for hazardous organics treatment, but it is severely limited by the high cost and resource shortage of electrode materials. Base-metal oxide semiconductor anodes have the merits of low cost, diversity, and tunable energy levels for charge transfer, and thus may be alternatives to the electrodes for wastewater treatment. Herein, we found that Ti-doped α-Fe₂O₃, as an example, could be efficient for sulfosalicylic acid oxidation, reaching comparable faraday efficiency of sulfosalicylic acid to that of the boron-doped diamond electrode. Ti-doped electrodes exhibited both higher removal rates and current efficiency compared to the undoped. This could be mainly ascribed to the enhanced charge transfer rate constant. Kinetic analysis shows that the apparent reaction order, in terms of sulfosalicylic acid in bulk solution, depended on applied potential and pollutant concentration. Mechanism study shows that the oxidation of sulfosalicylic acid was mainly through indirect pathway. Moreover, the oxidation products were determined and the oxidation mechanism was proposed. This study may open a door to employ base-metal oxide semiconductor anodes for the efficient treatment of organic wastewater.

Acute and chronic ecotoxicological effects of pharmaceuticals and their mixtures in Daphnia similis

Pharmaceuticals have increasingly received attention from the scientific community due to their growing intake, improved detection and potential ecological risks. Several pharmaceuticals, including antidepressants, anti-inflammatory and antidiabetic compounds and antibiotics, have been described as contaminants in different water matrices. In this context, the aim of the present study was to assess the acute and chronic effects of four classes of pharmaceuticals (acetylsalicylic acid, fluoxetine, metformin and ciprofloxacin) individually and in binary and quartenary mixture. Furthermore, the toxicity of binary mixtures containing the antidepressant fluoxetine was also evaluated. The results of the single acute and chronic toxicity assays indicate lower acetylsalicylic acid and higher fluoxetine toxicity towards Daphnia similis. Regarding the evaluated mixture toxicity, the nature of potential toxicological interactions was predicted by applying mathematical concentration addition and independent action models. The findings revealed both antagonistic and synergistic features, depending on the applied amounts and doses. Finally, the chronic assays performed with the quaternary mixture indicated the presence of a hormetic effect at low concentrations. In sum, the present study demonstrated that the effects of individual pharmaceuticals can underestimate the risk level of these contaminants in the environment.

Nanomaterials for Photocatalytic Degradations of Analgesic, Mucolytic and Anti-Biotic/Viral/Inflammatory Drugs Widely Used in Controlling SARS-CoV-2

The COVID-19 pandemic has been transformed into one of the main worldwide challenges, in recent years. For controlling symptoms that are caused by this disease (e.g., chills or fever, shortness of breath and/or difficulty in breathing, cough, sore throat, fatigue, headache, muscle aches, the new loss of tastes and/or smells, congestion or runny nose, nausea, vomiting and/or diarrhea), lots of medicines including analgesics, mucolytics, and anti-biotic/viral/inflammatory drugs have been frequently prescribed. As these medicines finally contaminate terrestrial and aquatic habitats by entering surface waterways through pharmaceutical production and excreting trace amounts of waste after human usage, they have negative impacts on wildlife’s health and ecosystem. Residual drugs in water have the potential to harm aquatic creatures and disrupt their food chain as well as the breeding cycle. Therefore, proper degradation of these broadly used medicines is highly crucial. In this work, the use of nanomaterials applicable in photocatalytic degradations of analgesics (e.g., acetaminophen, aspirin, ibuprofen, and naproxen), mucolytics (e.g., ambroxol), antibiotics (e.g., azithromycin and quinolones including hydroxychloroquine and chloroquine phosphate), anti-inflammatory glucocorticoids (e.g., dexamethasone and cortisone acetate), antihistamines (e.g., diphenhydramine), H2 blockers (e.g., famotidine), anthelmintics (e.g., praziquantel), and finally antivirals (e.g., ivermectin, acyclovir, lopinavir/ritonavir, favipiravir, nitazoxanide, and remdesivir) which widely used in controlling/treating the coronavirus have been reviewed and discussed.

Photodegradation of Anti-Inflammatory Drugs: Stability Tests and Lipid Nanocarriers for Their Photoprotection

The present paper provides an updated overview of the methodologies applied in photodegradation studies of non-steroidal anti-inflammatory drugs. Photostability tests, performed according to international standards, have clearly demonstrated the photolability of many drugs belonging to this class, observed during the preparation of commercial forms, administration or when dispersed in the environment. The photodegradation profile of these drugs is usually monitored by spectrophotometric or chromatographic techniques and in many studies the analytical data are processed by chemometric procedures. The application of multivariate analysis in the resolution of often-complex data sets makes it possible to estimate the pure spectra of the species involved in the degradation process and their concentration profiles. Given the wide use of these drugs, several pharmaceutical formulations have been investigated to improve their photostability in solution or gel, as well as the pharmacokinetic profile. The use of lipid nanocarriers as liposomes, niosomes or solid lipid nanoparticles has demonstrated to both minimize photodegradation and improve the controlled release of the entrapped drugs.

Photocatalysis for Heavy Metal Treatment: A Review

Environmental and human health are threatened by anthropogenic heavy metal discharge into watersheds. Traditional processes have many limitations, such as low efficiency, high cost, and by-products. Photocatalysis, an emerging advanced catalytic oxidation technology, uses light energy as the only source of energy. It is a clean new technology that can be widely used in the treatment of organic pollutants in water. Given the excellent adaptability of photocatalysis in environmental remediation, it can be used for the treatment of heavy metals. In this comprehensive review, the existing reported works in relevant areas are summarized and discussed. Moreover, recommendations for future work are provided.

Is ionizing radiation effective in removing pharmaceuticals from wastewater?

Wastewater and effluent discharges are the main causes of receiving water body pollution and important challenges in water quality management. Among the emerging contaminants, pharmaceuticals have increasingly drawn attention due to their incomplete removal during conventional biological treatment, inducing potential and actual risks to living organisms following residue discharges in river effluent. Electron beam irradiation (EBI) is a clean process technology for organic compound degradation and mineralization, as well as persistent pollutant detoxification. This study aimed to evaluate EBI effects on the degradation and toxicity removal of anti-inflammatory aspirin (ASA) in a single solution and in a fluoxetine (FLX) mixture. Results indicate that 98% of the single aspirin was degraded at 5.0 kGy. Aspirin toxicity to Daphnia similis, however, increased with increasing absorbed dose (1.0 to 5.0 kGy), possibly as a result of the presence of H₂O₂ and other byproducts formed during the oxidation process. Regarding the irradiated mixture, complete degradation was achieved for both pharmaceuticals. Toxicity removals for the mixture were of 56.2 ± 0.9% and 58.8 ± 5.4% for 1.0 and 2.5 kGy, respectively. These findings demonstrate that EBI can be an interesting alternative process to be applied as a pre-treatment followed by biological treatment.

The Influence of UV Light on Photodegradation of Acetylsalicylic Acid

Photodegradation of the aqueous solutions of acetylsalicylic acid, in the absence (ASA) and the presence of excipients (ASE), is demonstrated by the photoluminescence (PL). A shift of the PL bands from 342 and 338 nm to 358 and 361-397 nm for ASA and ASE in solid state and as aqueous solutions was reported. By exposure of the solution of ASA 0.3 M to UV light, a decrease in the PL band intensity was highlighted. This behavior was revealed for ASA in the presence of phosphate buffer (PB) having the pH equal to 6.4, 7, and 8 or by the interaction with NaOH 0.3 M. A different behavior was reported in the case of ASE. In the presence of PB, an increase in the intensity of the PL band of ASE simultaneously with a change of the ratio between the intensities of the bands at 361-364 and 394-397 nm was highlighted. The differences between PL spectra of ASA and ASE have their origin in the presence of salicylic acid (SAL). The interaction of ASE with NaOH induces a shift of the PL band at 405-407 nm. Arguments for the reaction of ASA with NaOH are shown by Raman scattering and FTIR spectroscopy.

Present applications of titanium dioxide for the photocatalytic removal of pollutants from water: A review

The evolution of modern technology and industrial processes has been accompanied by an increase in the utilization of chemicals to derive new products. Water bodies are frequently contaminated by the presence of conventional pollutants such as dyes and heavy metals, as well as microorganisms that are responsible for various diseases. A sharp rise has also been observed in the presence of new compounds heretofore excluded from the design and evaluation of wastewater treatment processes, categorized as "emerging pollutants". While some are harmless, certain emerging pollutants possess the ability to cause debilitating effects on a wide spectrum of living organisms. Photocatalytic degradation has emerged as an increasingly popular solution to the problem of water pollution due to its effectiveness and versatility. The primary objective of this study is to thoroughly scrutinize recent applications of titanium dioxide and its modified forms as photocatalytic materials in the removal and control of several classes of water pollutants as reported in literature. Different structural modifications are used to enhance the performance of the photocatalyst such as doping and formation of composites. The principles of these modifications have been scrutinized and evaluated in this review in order to present their advantages and drawbacks. The mechanisms involved in the removal of different pollutants through photocatalysis performed by TiO2 have been highlighted. The factors affecting the mechanism of photocatalysis and those affecting the performance of different TiO2-based photocatalysts have also been thoroughly discussed, thereby presenting a comprehensive view of all aspects involved in the application of TiO₂ to remediate and control water pollution.

Development of 3-dimensional Co3O4 catalysts with various morphologies for activation of Oxone to degrade 5-sulfosalicylic acid in water

Since 5-sulfosalicylic acid (SFA) has been increasingly released to the environment, SO₄^--based oxidation processes using Oxone have been considered as useful methods to eliminate SFA. As Co₃O₄ has been a promising material for OX activation, the four 3D Co₃O₄ catalysts with distinct morphologies, including Co₃O₄-C (with cubes), Co₃O₄-P (with plates), Co₃O₄-N (with needles) and Co₃O₄-F (with floral structures), are fabricated for activating OX to degrade SFA. In particular, Co₃O₄-F not only exhibits the highest surface area but also possesses the abundant Co²⁺ and more reactive surface, making Co₃O₄-F the most advantageous 3D Co₃O₄ catalyst for OX activation to degrade SFA. The mechanism of SFA by this 3D Co₃O₄/OX is also investigated and the corresponding SFA degradation pathway has been elucidated. The catalytic activities of Co₃O₄ catalysts can be correlated to physical and chemical properties which were associated with particular morphologies to provide insights into design of 3D Co₃O₄-based catalysts for OX-based technology to degrade emerging contaminants, such as SFA.

Time-resolved in situ monitoring of photocatalytic reactions by probe electrospray ionization mass spectrometry

Probe electrospray ionization mass spectrometry (PESI-MS) has been demonstrated to be a useful in situ and online analytical technique for monitoring of various reactions. In this work, PESI-MS with a surface-modified probe was adopted and applied to in situ monitoring of photocatalytic reactions. Typical reactions of semiconductor photocatalysts, namely TiO₂, SnO₂, WO₃, SiC and ZnS catalyzed methylene blue (MB) and brilliant green (BG) degradation, were selected to demonstrate the potential of PESI-MS to monitor heterogeneous photocatalytic reactions occurring in suspensions. Surface modification of the probe ensures increased wettability during the whole monitoring process. PESI-MS could provide continuous sampling and real-time MS results without time-consuming and cumbersome sample pretreatments. This method has other merits including good reproducibility and stability (time scale > 60 min), convenience of operation, low sample consumption, high time resolution and high tolerance to suspended photocatalyst particles. Time-resolved mass spectra and ion chromatograms of every chemical species e.g. the substrate and reactive intermediates could be obtained, which is helpful for a better understanding of the photocatalytic reaction process. Thus, PESI-MS could be a versatile analytical technique for in situ photocatalytic reaction analysis and could be an alternative means for the evaluation of photocatalyst performance.

Assessment of Degradation Behavior for Acetylsalicylic Acid Using a Plasma in Liquid Process

Acetylsalicylic acid (ASA) is a pharmacologically active compound. In this study, ASA was decomposed effectively using a plasma in liquid phase process with hydrogen peroxide and TiO2 photocatalyst. Increasing the electrical power conditions (frequency, applied voltage, and pulse width) promoted plasma generation, which increased the rate of ASA decomposition. The added hydrogen peroxide increased the rate of ASA degradation, but injecting an excess decreased the degradation rate due to a scavenger effect. Although there was an initial increase in the decomposition efficiency by the addition of TiO2 powder, the addition of an excessive amount inhibited the generation of plasma and decreased the degradation rate. The simultaneous addition of H2O2 and TiO2 powder resulted in the highest degradation efficiency. We suggest that ASA is converted to salicylic acid through demethylation by hydroxyl radicals and is finally mineralized to carbon dioxide and water via 2,4-dihydroxy benzoic acid and low molecular acids.

Metabolic activity and pathway study of aspirin biodegradation using a microbial electrochemical system supplied by an alternating current

The main aim of this study is to investigate the biodegradation of highly concentrated aspirin as an emerging pollutant from aqueous solution using an alternating current microbial electrochemical system. A single-chamber Plexiglas cylindrical reactor equipped with stainless steel mesh electrodes (18 cm height × 16 cm diameter) was applied as the bioreactor in batch mode with an effective volume of 5 L, height of 20 cm, and the diameter about 20 cm by AMPL = 2 V_pp, OFST = 0.1 V, waveform = sinusoidal, frequency = 10 Hz, and pH = 7. The process parameters including initial concentration (100-400 mg L^-1), chemical oxygen demand (COD), activity of enzymes, biokinetic and pathway studies at very low voltage and very low frequency alternating current were investigated. The specific biodegradation rate of aspirin was calculated based on Michaelis-Menten model. The complete aspirin removal efficiency and the maximum enzymatic activity were achieved at 250 mg L^-1 aspirin, voltage of 2 V_pp and applied current = 3 mA during 6 h. The bioassay of aspirin concentrations in biofilm of the system using flow cytometry analysis resulted in the live and necrotic cells shares of 96.2%, and 0.44%, respectively. Moreover, the LC and GC-MS analysis showed low molecular weight acids such as oxalic and acetic acid at 6 h time under the optimal conditions using very low applied voltage and frequency. Obtaining low reaction time for degradation, high potential in biodegradation, oxidation and mineralization ability were the novelty of treatment system with high concentration aspirin in the study.

Removal of acetylsalicylate and methyl-theobromine from aqueous environment using nano-photocatalyst WO3-TiO2 @g-C3N4 composite

Highly efficient, visible light-driven and a novel ternary hybrid photocatalyst WO₃-TiO₂-g-C₃N₄ with robust stabilities and versatile properties has been synthesized through facile hydrothermal method. This study considers the photo-degradation of aspirin (acetylsalicylate) and caffeine (methyl-theobromine) via photocatalysts (WO₃, WO₃/TiO_2, and WO₃/TiO₂/g-C₃N₄ (WTCN) composite) under visible-light irradiation. The SEM and TEM images show the formation of WO₃ nanoparticles with orthorhombic structure and average particle size of 65 nm. The photocatalyst WTCN composite possesses higher-catalytic activity when compared to that of WO₃ and WO₃/TiO₂ for degradation of aspirin and caffeine. The incorporation of g-C₃N₄ in WO₃/TiO₂ composite exhibited significant influence on the photocatalytic performance for both pollutants. Excellent photocatalytic performance of WTCN composite was observed owing to hydroxyl radical (OH) and superoxide radical (O₂^-) as main active species. The enhanced photocatalytic activity of WTCN composite can be attributed to following three reasons: (1) extended visible-light absorption; (2) extended surface area; (3) efficient charge-separation due to synergistic effects between g- and WO₃/TiO₂ composite. The removal efficiency of aspirin and caffeine (Methyl theobromine) could be achieved as much as 98% and 97% for acetylsalicylate and methyl-theobromine using WTCN composite material, respectively. This study could provide new insights into the synthesis of novel WO₃-based materials for environmental and energy applications.

Parameters Affecting Adsorption and Photocatalytic Degradation Behavior of Gentian Violet under UV Irradiation with Several Kinds of TiO2 as a Photocatalyst

The photocatalytic decolorization of Gentian violet (GV) from an aqueous solution was studied by focusing on comparison of the photoactivity of different type of TiO2 catalyst. The process was carried out under a variety of conditions. The efficiency of P25-Degussa and PC50-Millennium photocatalysts were compared. The effect of different parameters such as pH, initial dye concentration, catalyst loading and the presence of some anions on both adsorption in the absence of light and the degradation under UV irradiation have been studied. 365 nm UV-A lamp was employed as irradiation source. The kinetic study showed that no correlation was observed between the adsorption capacity of the catalyst and its photoactivity, despite of this the effect of various parameters on adsorption and photocatalytic kinetic behavior was practically similar on various catalysts. The photocatalytic degradation of GV followed first-order reaction kinetics and the higher adsorption and photocatalytic degradation were obtained at the alkaline medium (pH = 10 for P25 and pH = 8 for PC50). However, the reaction at the acidic medium was gradually delayed due to the effect of charge repulsion. The presence of some anions (Cl−, SO42−, NO3−) in the medium at higher concentration was found to reduce the adsorption and to inhibit the degradation.

OH-initiated transformation and hydrolysis of aspirin in AOPs system: DFT and experimental studies

Advanced oxidation processes (AOPs) are widely used in wastewater treatment of pharmaceutical and personal care products (PPCPs). In this work, the OH-initiated transformation as well as the hydrolysis of a typical PPCPs, aspirin, was investigated using density functional theory (DFT) calculations and laboratory experiments. For DFT calculations, the frontier electron densities and bond dissociation energies were analyzed. Profiles of the potential energy surface were constructed, and all the possible pathways were discussed. Additionally, rate constants for each pathway were calculated with transition state theory (TST) method. UV/H₂O₂ experiments of aspirin were performed and degradation intermediates were identified by UPLC-MS-MS analysis. Different findings from previous experimental works were reported that the H-abstraction pathways at methyl position were dominated and OH-addition pathways on benzene ring were also favored. Meantime, hydroxyl ASA was confirmed as the main stable intermediate. Moreover, it was the first time to use DFT method to investigate the hydrolysis mechanisms of organic ester compound.