Effective Dye Degradation by Graphene Oxide Supported Manganese Oxide

Photocatalytic Dye Degradation from Textile Wastewater: A Review

The elimination of dyes discharged from industrial wastewater into water bodies is crucial due to its detrimental effects on aquatic organisms and potential carcinogenic impact on human health. Various methods are employed for dye removal, but they often fall short in completely degrading the dyes and generating large amounts of suspended solids. Hence, there is a critical need for an efficient process that can achieve complete dye degradation with minimal waste emission. Among traditional water treatment approaches, photocatalysis stands out as a promising method for degrading diverse toxic and organic pollutants present in wastewater. In this review, the heterogeneous photocatalysis process is well explained for dye removal. This comprehensive review not only provides insightful illumination on the classification of dyes but also thoroughly explains various dye removal methods and the underlying mechanisms of photocatalysis. Furthermore, factors which effect the activity of the photocatalysis process are also explained in detail. Likewise, we categorized the heterogeneous photocatalyst in three generations and observed their activity for dye removal. This review also addresses the challenges and effectiveness of this promising field. Its primary aim is to offer a comprehensive overview of the photocatalytic degradation of pollution and to explore its potential for further future applications.

Sustainable use of low-cost adsorbents prepared from waste fruit peels for the removal of selected reactive and basic dyes found in wastewaters

Agricultural wastes are potential sustainable adsorbents since they are available in large quantities, are low-cost, and may require little or no treatment, in some cases. In this study, several fruit peels, such as banana, orange, and pomegranate, were collected from local markets and prepared by a simple and eco-friendly method and used as natural adsorbents for the removal of both anionic (Reactive Red 120 (RR120), Reactive Black 5 (RB5), Remazol Brilliant Blue R (RBBR)) and cationic Methylene Blue (MB) dyes found in wastewaters. Many industries, such as leather and textiles, can release huge amounts of synthetic dyes into the wastewater during dyeing processes. These are one of the most important pollutants of water pollution as they cause enormous damage to the water body and also affect the health of organisms due to their toxicity and carcinogenicity. The search for a sustainable and at the same time efficient material for the removal of a wide variety of dyes is the innovation of this work. These peels were prepared by washing, drying, grinding, and finally sieving, under natural sustainable conditions. Porosometry (BET analysis), FTIR, SEM/EDS, and XRD techniques were used to characterize the fruit peels before and after the adsorption process. Factors affecting the adsorption of dyes (adsorbent dosage, pH solution, initial concentration of dyes, contact time, and temperature) were investigated. According to the results, in terms of the effectiveness of fruit peels as (natural) adsorbent materials, for anionic dyes, 5.0-6.0 g/L of banana or orange dry peels was sufficient to remove near or even more than 90% anionic dyes at pH 2.0, and 4.0 g/L was sufficient to remove 98% of cationic MB dye at pH 9.0. Similar amount of pomegranate peels had lower efficiency for anionic dyes (50-70%), while cationic MB was still efficiently removed (98%) at pH 9.0. Moreover, the adsorption process in all cases was found to better fit to pseudo-second-order model, in comparison to pseudo-first-order model. According to isotherms, Freundlich model fitted better in some cases to the equilibrium data, while the Langmuir model in others. Finally, this study demonstrates the viability of reusing the banana, orange, and pomegranate peel adsorbents for eight, four, and five cycles, showing a gradual reduction of around 50% of their effectiveness.

Eco-friendly oxidation of a reactive textile dye by CaO2: effects of specific independent parameters

Textile wastewater containing dyes poses significant risks to the environment. Advanced oxidation processes (AOPs) effectively eliminate dyes by converting them into harmless substances. However, AOPs have drawbacks such as sludge formation, metal toxicity, and high cost. As an alternative to AOPs, calcium peroxide (CaO2) offers an eco-friendly and potent oxidant for dye removal. Unlike certain AOPs that generate sludge, CaO2 can be directly employed without resulting in sludge formation. This study examines the use of CaO2 for oxidizing Reactive Black 5 (RB5) in textile wastewater without any activator. Various independent factors-pH, CaO2 dosage, temperature, and certain anions-were investigated for their influence on the oxidation process. The effects of these factors on dye oxidation were analyzed using the Multiple Linear Regression Method (MLR). CaO2 dosage was determined to be the most influential parameter for RB5 oxidation, while the optimal pH for oxidation with CaO2 was found to be 10. The study determined that 0.5 g of CaO2 achieved approximately 99% efficiency in oxidizing 100 mg/L of RB5. Additionally, the study revealed that the oxidation process is endothermic, with an activation energy (Ea) and standard enthalpy (ΔH°) for RB5 oxidation by CaO2 determined as 31.135 kJ mol-1 and 110.4 kJ mol-1, respectively. The presence of anions decreased RB5 oxidation, with decreasing effectiveness observed in the order of PO43-, SO42-, HCO3-, Cl-, CO32-, and NO3-. Overall, this research highlights CaO2 as an effective, easy-to-use, eco-friendly, and cost-efficient method for removing RB5 from textile wastewater.

A critical review on the biosynthesis, properties, applications and future outlook of green MnO2 nanoparticles

MnO2 nanoparticles have played a vital role in biomedical, catalysis, electrochemical and energy storage fields, but requiring toxic chemicals in the fabrication intercepts their applications. There is an increasing demand for biosynthesis of MnO2 nanoparticles using green sources such as plant species in accordance with the purposes of environmental mitigation and production cost reduction. Here, we review recent advancements on the use of natural compounds such as polyphenols, reducing sugars, quercetins, etc. Extracted directly from low-cost and available plants for biogenic synthesis of MnO2 nanoparticles. Role of these phytochemicals and formation mechanism of bio-medicated MnO2 nanoparticles are shed light on. MnO2 nanoparticles own small particle size, high crystallinity, diverse morphology, high surface area and stability. Thanks to higher biocompatibility, bio-mediated synthesized MnO2 nanoparticles exhibited better antibacterial, antifungal, and anticancer activity than chemically synthesized ones. In terms of wastewater treatment and energy storage, they also served as efficient adsorbents and catalyst. Moreover, several aspects of limitation and future outlook of bio-mediated MnO2 nanoparticles in the fields are analyzed. It is expected that the present work not only expands systematic understandings of synthesis methods, properties and applications MnO2 nanoparticles but also pave the way for the nanotechnology revolution in combination with green chemistry and sustainable development.

Immobilization of Cd in the soil of mining areas by FeMn oxidizing bacteria

Microorganisms are widely used in large-scale pollution remediation due to their rapid reproduction and low cost. In this study, bioremediation batch experiments and characterization methods were adopted to investigate the mechanism of FeMn oxidizing bacteria on the immobilization of Cd in mining soil. The results showed that the FeMn oxidizing bacteria successfully reduced 36.84 % of the extractable Cd in the soil. The exchangeable forms, carbonate-bound forms, and organic-bound forms of Cd in the soil decreased by 11.4 %, 8 %, and 7.4 %, respectively, due to the addition of FeMn oxidizing bacteria, while FeMn oxides-bound and residual forms of Cd increased by 19.3 % and 7.5 %, as compared to the control treatments. The bacteria promotes the formation of amorphous FeMn precipitates such as lepidocrocite and goethite, which have high adsorption capacity on soil Cd. The oxidation rates of Fe and Mn in the soil treated with the oxidizing bacteria reached 70.32 % and 63.15 %, respectively. Meanwhile, the FeMn oxidizing bacteria increased soil pH and decreased soil organic matter content, further decreasing the extractable Cd in the soil. The FeMn oxidizing bacteria have the potential to be used in large mining areas to assist in the immobilization of heavy metals.

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

Nanomaterials as a Sustainable Choice for Treating Wastewater: A Review

The removal of dyes from textile effluents utilizing advanced wastewater treatment methods with high efficiency and low cost has received substantial attention due to the rise in pollutants in water. The purpose of this work is to give a comprehensive analysis of the different treatments for removing chemical dyes from textile effluents. The capability and potential of conventional treatments for the degradation of dyeing compounds in aqueous media, as well as the influence of multiple parameters, such as the pH solution, initial dye concentration, and adsorbent dose, are presented in this study. This study is an overview of the scientific research literature on this topic, including nanoreductive and nanophotocatalyst processes, as well as nanoadsorbents and nanomembranes. For the purpose of treating sewage, the special properties of nanoparticles are currently being carefully researched. The ability of nanomaterials to remove organic matter, fungus, and viruses from wastewater is another benefit. Nanomaterials are employed in advanced oxidation techniques to clean wastewater. Additionally, because of their small dimensions, nanoparticles have a wide effective area of contact. Due to this, nanoparticles' adsorption and reactivity are powerful. The improvement of nanomaterial technology will be beneficial for the treatment of wastewater. This report also offers a thorough review of the distinctive properties of nanomaterials used in wastewater treatment, as well as their appropriate application and future possibilities. Since only a few types of nanomaterials have been produced, it is also important to focus on their technological feasibility in addition to their economic feasibility. According to this study, nanoparticles (NPs) have a significant adsorption area, efficient chemical reactions, and electrical conductivity that help treat wastewater effectively.

Removal of Aniline and Benzothiazole Wastewaters Using an Efficient MnO2/GAC Catalyst in a Photocatalytic Fluidised Bed Reactor

This work presents an efficient method for treating industrial wastewater containing aniline and benzothiazole, which are refractory to conventional treatments. A combination of heterogeneous photocatalysis operating in a fluidised bed reactor is studied in order to increase mass transfer and reduce reaction times. This process uses a manganese dioxide catalyst supported on granular activated carbon with environmentally friendly characteristics. The manganese dioxide composite is prepared by hydrothermal synthesis on carbon Hydrodarco^® 3000 with different active phase ratios. The support, the metal oxide, and the composite are characterised by performing Brunauer, Emmett, and Teller analysis, transmission electron microscopy, X-ray diffraction analysis, X-ray fluorescence analysis, UV-Vis spectroscopy by diffuse reflectance, and Fourier transform infrared spectroscopy in order to evaluate the influence of the metal oxide on the activated carbon. A composite of MnO₂/GAC (3.78% in phase α-MnO₂) is obtained, with a 9.4% increase in the specific surface of the initial GAC and a 12.79 nm crystal size. The effect of pH and catalyst load is studied. At a pH of 9.0 and a dose of 0.9 g L^-1, a high degradation of aniline and benzothiazole is obtained, with an 81.63% TOC mineralisation in 64.8 min.

Barium/Cobalt@Polyethylene Glycol Nanocomposites for Dye Removal from Aqueous Solutions

Dyes are known as one of the most dangerous industrial pollutants which can cause skin diseases, allergy, and provoke cancer and mutation in humans. Therefore, one of the important environmental issues is the effective removal of dyes from industrial wastewater. In the current work, BaFe₁₂O₁₉/CoFe₂O₄@polyethylene glycol (abbreviated as BFO/CFO@PEG) nanocomposite was synthesized and evaluated regarding its capacity for adsorptive removal of a model dye Acid Blue 92 (denoted as AB92) from aqueous solutions. The characteristics of the prepared nanocomposite was determined by tests such as X-ray diffraction (XRD), scanning electron microscope (SEM), vibration sample magnetization (VSM), and Fourier transform infrared spectroscopy (FTIR). The effects of conditional parameters including pH (2–12), initial concentration of dye (20–100 mg/L), adsorbent dosage (0.02–0.1 g/L) and contact time (0-180 min) on the adsorption of dye were investigated and then optimized. The results indicated that with the increase of the adsorbent dosage from 0.02 to 0.1 g/L, the removal efficiency increased from 74.1% to 78.6%, and the adsorbed amount decreased from 148.25 to 31.44 mg/g. The maximum removal efficiency (77.54%) and adsorption capacity (31.02 mg/g) were observed at pH 2. Therefore, the general optimization conditions revealed that the maximum adsorption efficiency of dye was obtained in condition of initial concentration of 20 mg/L, contact time of 1 h and pH of solution equal 2. The adsorption isotherm and kinetic data were evaluated using a series of models. The pseudo-second order kinetic model and Freundlich isotherm model show the best fitting with experimental data with R²∼0.999.

Simultaneous removal of iron and manganese from acid mine drainage by acclimated bacteria

A bacterial consortium for efficient decontamination of high-concentration Fe-Mn acid mine drainage (AMD) was successfully isolated. The removal efficiencies of Fe and Mn were effective, reaching 99.8 % and 98.6 %, respectively. High-throughput sequencing of the 16S rRNA genes demonstrated that the microbial community had changed substantially during the treatment. The Fe-Mn oxidizing bacteria Flavobacterium, Brevundimonas, Stenotrophomonas and Thermomonas became dominant genera, suggesting that they might play vital roles in Fe and Mn removal. Moreover, the pH of culture increased obviously after incubation, which was benefit for depositing Fe and Mn from AMD. The specific surface area of the biogenic Fe-Mn oxides was 108-121 m²/g, and the surface contained reactive oxygen functional groups (-OH and -COOH), which also improved Fe and Mn removal efficiency. Thus, this study provides an alternative method to treat AMD containing high concentrations of Fe and Mn.

Sonication enhances the stability of MnO2 nanoparticles on silk film template for enzyme mimic application

We have developed an in-situ method using sonication (3 mm probe sonicator, 30 W, 20 kHz) and auto-reduction (control) to study the mechanism of the formation of manganese dioxide (MnO₂) on a solid template (silk film), and its resulting enzymatic activity on tetramethylbenzidine (TMB) substrate. The fabrication of the silk film was first optimized for stability (no degradation) and optical transparency. A factorial approach was used to assess the effect of sonication time and the initial concentration of potassium permanganate (KMnO₄). The result indicated a significant correlation with a fraction of KMnO₄ consumed and MnO₂ formation. Further, we found that the optimal process conditions to obtain a stable silk film with highly catalytic MnO₂ nanoparticles (NPs) was 30 min of sonication in the presence of 0.5 mM of KMnO₄ at a temperature of 20-24 °C. Under the optimal condition, we monitored in-situ the formation of MnO₂ on the silk film, and after thorough rinsing, the in-situ catalysis of 0.8 mM of TMB substrate. For control, we used the auto-reduction of KMnO₄ onto the silk film after about 16 h. The result from single-wavelength analysis confirmed the different kinetics rates for the formation of MnO₂ via sonication and auto-reduction. The result from the multivariate component analysis indicated a three components route for sonication and auto-reduction to form MnO₂-Silk. Overall, we found that the smaller size, more mono-dispersed, and deeper buried MnO₂ NPs in silk film prepared by sonication, conferred a higher catalytic activity and stability to the hybrid material.

Fast and efficient aqueous arsenic removal by functionalized MIL-100(Fe)/rGO/δ-MnO2 ternary composites: Adsorption performance and mechanism

Because of its significant toxicological effects on the environment and human health, arsenic (As) is a major global issue. In this study, an Fe-based metal-organic framework (MOF) (Materials of Institut Lavoisier: MIL-100 (Fe)) which was impregnated with reduced graphene oxide (rGO) by using a simple hydrothermal method and coated with birnessite-type manganese oxide (δ-MnO₂) using the one-pot reaction process (MIL-100(Fe)/rGO/δ-MnO₂ nanocomposites) was synthesized and applied successfully in As removal. The removal efficiency was rapid, the equilibrium was achieved in 40 min and 120 min for As(III) and As(V), respectively, at a level of 5 mg/L. The maximum adsorption capacities of As(III) and As(V) at pH 2 were 192.67 mg/g and 162.07 mg/g, respectively. The adsorbent revealed high stability in pH range 2-9 and saturated adsorbent can be fully regenerated at least five runs. The adsorption process can be described by the pseudo-second-order kinetic model and Langmuir monolayer adsorption. The adsorption mechanisms consisted of electrostatic interaction, oxidation and inner sphere surface complexation.

Wastewater Treatment Processes: Part I

Cheap and plentiful, water was for centuries a manufacturing tool that industry took for granted [...]

Recent developments in MnO2-based photocatalysts for organic dye removal: a review

The textile industry consumes a large volume of organic dyes and water. These organic dyes, which remained in the effluents, are usually persistent and difficult to degrade by conventional wastewater treatment techniques. If the wastewater is not treated properly and is discharged into water system, it will cause environmental pollution and risk to living organisms. To mitigate these impacts, the photo-driven catalysis process using semiconductor materials emerges as a promising approach. The semiconductor photocatalysts are able to remove the organic effluent through their mineralization and decolorization abilities. Besides the commonly used titanium dioxide (TiO₂), manganese dioxide (MnO₂) is a potential photocatalyst for wastewater treatment. MnO₂ has a narrow bandgap energy of 1~2 eV. Thus, it possesses high possibility to be driven by visible light and infrared light for dye degradation. This paper reviews the MnO₂-based photocatalysts in various aspects, including its fundamental and photocatalytic mechanisms, recent progress in the synthesis of MnO₂ nanostructures in particle forms and on supporting systems, and regeneration of photocatalysts for repeated use. In addition, the effect of various factors that could affect the photocatalytic performance of MnO₂ nanostructures are discussed, followed by the future prospects of the development of this semiconductor photocatalysts towards commercialization.

Modified graphene oxide as manganese oxide support for bisphenol A degradation

Sodium hydroxide modified graphene oxide was used as manganese oxide support for the preparation of three nanocomposite catalysts via an one-pot preparation route, for the degradation of an endocrine disruptor, bisphenol-A. The nanocomposites were characterized for their structure by X-ray diffraction, for their morphology with scanning electron microscopy and for their surface chemistry with Fourier transform infrared spectroscopy, potentiometric titration and thermal analysis measurements. The nanocomposites prepared showed to possess high catalytic activity for the degradation/oxidation of bisphenol-A at ambient conditions, without light irradiation and/or the addition of oxidants, which was higher than that of the pure manganese oxides and can be attributed to the synergistic effect of the manganese oxide and the modified graphene oxide. The increase degradation of bisphenol-A presented by the nanocomposite with the higher manganese percentage could be attributed to the different manganese oxide phase formed.

Reactive Black 5 Degradation on Manganese Oxides Supported on Sodium Hydroxide Modified Graphene Oxide

Sodium hydroxide-modified graphene oxide was used as manganese oxides support for the preparation of nanocomposites via a one-pot preparation route for the degradation of Reactive Black 5. The nanocomposites were characterized for their structure by X-ray diffraction, for their textural properties by Nitrogen adsorption, and for their surface chemistry by Fourier transform infrared spectroscopy, potentiometric titration, and thermal analysis measurements. The nanocomposites prepared showed to possess high activity for the degradation/oxidation of Reactive Black 5 at ambient conditions, without light irradiation, which was higher than that of the precursors manganese oxides and can be attributed to the synergistic effect of the manganese oxides and the modified graphene oxide.