Diamond nanowires: a novel platform for electrochemistry and matrix-free mass spectrometry

Templated Synthesis of Diamond Nanopillar Arrays Using Porous Anodic Aluminium Oxide (AAO) Membranes

Diamond nanostructures are mostly produced from bulk diamond (single- or polycrystalline) by using time-consuming and/or costly subtractive manufacturing methods. In this study, we report the bottom-up synthesis of ordered diamond nanopillar arrays by using porous anodic aluminium oxide (AAO). Commercial ultrathin AAO membranes were adopted as the growth template in a straightforward, three-step fabrication process involving chemical vapor deposition (CVD) and the transfer and removal of the alumina foils. Two types of AAO membranes with distinct nominal pore size were employed and transferred onto the nucleation side of CVD diamond sheets. Subsequently, diamond nanopillars were grown directly on these sheets. After removal of the AAO template by chemical etching, ordered arrays of submicron and nanoscale diamond pillars with ~325 nm and ~85 nm diameters were successfully released.

Rational Design of Diamond Electrodes

Diamond electrodes stepped onto the stage in the early 1990s for electroanalytical applications. They possess the features of long-term chemical inertness, wide potential windows, low and stable background currents, high microstructural stability at different potentials and in different media, varied activity toward different electroactive species, reliable electrochemical response of redox systems without conventional pretreatment, high resistance to surface fouling in most cases, and possibility of forming composites with different components such as other carbon materials, carbides, and oxidizes. Most diamond electrodes are prepared in microcrystalline or nanocrystalline form using chemical vapor deposition techniques. Starting from diamond films and diamond composites, numerous nanostructured diamond electrodes have also been produced. The features of diamond electrodes are therefore heavily dependent on the growth conditions and post-treatment procures that are applied on diamond electrodes such as introduced dopant(s), surface termination(s), surface functional group(s), added components, and final structure(s). Numerous applications of diamond electrodes have been explored in the fields of electrochemical sensing, electrosynthesis, electrocatalysis, electrochemical energy storage and conversion, devices, and environmental degradation.This Account summarizes our strategies to design different diamond electrodes, including diamond films, diamond composites, as well as their nanostructures. With respect to diamond films, the modulation of their dopant(s) and surface termination(s) as well as the attachment of functional modifier(s) onto their surface are discussed. Electrochemical hydrogenation and oxygenation of diamond electrodes are detailed at an atomic scale. As the examples of designing diamond electrodes at a molecular scale, photochemical and electrochemical attachment of modifier(s) onto diamond electrodes are shown. Moreover, electrochemical grafting of diazonium salts is proposed as a new technique to identify hydrogenated, hydroxylated, and oxygenated terminations of diamond electrodes. The introduction of additional component(s) into a diamond film to form diamond composites is then overviewed, where a hydrogen-induced selective growth model is proposed to elucidate the preparation of diamond/β-SiC composites. Subsequently, the production of various diamond nanostructures from diamond films and composites by means of top-down, bottom-up, and template-free approaches is shown. Electrochemical application examples of diamond electrodes are overviewed, covering direct electrochemistry of natural Cytochrome c on a hydroxylated diamond surface, sensitive electrochemical DNA biosensing on tip-functionalized diamond nanowires, and construction of high-performance supercapacitors using diamond electrodes and redox electrolytes. Our diamond supercapacitors, also named battery-like diamond supercapacitors or diamond supercabatteries, are highlighted since they combine the features of supercapacitors and batteries. Future perspectives of diamond electrodes are outlined, ranging from their rational design and synthesis to their electrochemical applications in different fields.

Highly porous seeding-free boron-doped ultrananocrystalline diamond used as high-performance anode for electrochemical removal of carbaryl from water

Boron-doped diamond (BDD) electrodes are regarded as the most promising catalytic materials that are highly efficient and suitable for application in advanced electrochemical oxidation processes targeted at the removal of recalcitrant contaminants in different water matrices. Improving the synthesis of these electrodes through the enhancement of their morphology, structure and stability has become the goal of the material scientists. The present work reports the use of an ultranano-diamond electrode with a highly porous structure (B-UNCD_WS/TDNT/Ti) for the treatment of water containing carbaryl. The application of the proposed electrode at current density of 75 mA cm^-2 led to the complete removal of the pollutant (carbaryl) from the synthetic medium in 30 min of electrolysis with an electric energy per order of 4.01 kWh m^-3 order^-1. The results obtained from the time-course analysis of the carboxylic acids and nitrogen-based ions present in the solution showed that the concentrations of nitrogen-based ions were within the established maximum levels for human consumption. Under optimal operating conditions, the proposed electrode was successfully employed for the complete removal of carbaryl in real water. Thus, the findings of this study show that the unique, easy-to-prepare BDD-based electrode proposed in this study is a highly efficient tool which has excellent application potential for the removal of recalcitrant pollutants in water.

Enhancing electroanalytical performance of porous boron-doped diamond electrodes by increasing thickness for dopamine detection

Novel porous boron-doped diamond (BDD_porous)-based materials have attracted lots of research interest due to their enhanced detection ability and biocompatibility, favouring them for use in neuroscience. This study reports on morphological, spectral, and electrochemical characterisation of three BDD_porous electrodes of different thickness given by a number of deposited layers (2, 3 and 5). These were prepared using microwave plasma-enhanced chemical vapour deposition on SiO₂ nanofiber-based scaffolds. Further, the effect of number of layers and poly-l-lysine coating, commonly employed in neuron cultivation experiments, on sensing properties of the neurotransmitter dopamine in a pH 7.4 phosphate buffer media was investigated. The boron doping level of ∼2 × 10²¹ atoms cm^-3 and increased content of non-diamond (sp²) carbon in electrodes with more layers was evaluated by Raman spectroscopy. Cyclic voltammetric experiments revealed reduced working potential windows (from 2.4 V to 2.2 V), higher double-layer capacitance values (from 405 μF cm^-2 to 1060 μF cm^-2), enhanced rates of electron transfer kinetics and larger effective surface areas (from 5.04 mm² to 7.72 mm²), when the number of porous layers increases. For dopamine, a significant boost in analytical performance was recognized with increasing number of layers using square-wave voltammetry: the highest sensitivity of 574.1 μA μmol^-1 L was achieved on a BDD_porous electrode with five layers and dropped to 35.9 μA μmol^-1 L when the number of layers decreased to two. Consequently, the lowest detection limit of 0.20 μmol L^-1 was obtained on a BDD_porous electrode with five layers. Moreover, on porous electrodes, enhanced selectivity for dopamine detection in the presence of ascorbic acid and uric acid was demonstrated. The application of poly-l-lysine coating on porous electrode surface resulted in a decrease in dopamine peak currents by 17% and 60% for modification times of 1 h and 15 h, respectively. Hence, both examined parameters, the number of deposited porous layers and the presence of poly-l-lysine coating, were proved to considerably affect the characteristics and performance of BDD_porous electrodes.

Ultrananocrystalline Diamond Nanowires: Fabrication, Characterization, and Sensor Applications

The aim of this review is to provide a survey of the recent advances and the main remaining challenges related to the ultrananocrystalline diamond (UNCD) nanowires and other nanostructures which exhibit excellent capability as the core components for many diverse novel sensing devices, due to the unique material properties and geometry advantages. The boron or nitrogen doping introduced in the gas phase during deposition promotes p-type or n-type conductivity. With the establishment of the UNCD nanofabrication techniques, more and more nanostructure-based devices are being explored in measuring basic physical and chemical parameters via classic and quantum methods, as exemplified by gas sensors, ultraviolet photodetectors, piezoresistance effect-based devices, biological applications and biosensors, and nitrogen-vacancy color center-based magnetic field quantum sensors. Highlighted finally are some of the remaining challenges and the future outlook in this area.

Nanoplasmonic 1D Diamond UV Photodetectors with High Performance

Diamond nanowires have recently drawn substantial attention because of their unique physical and chemical properties for electrochemical sensors, optoelectronics, and nanophotonics applications. However, diamond nanowire-based ultraviolet photodetectors have not been reported because of the challenges involved in synthesizing crystalline diamond nanowires with controllable morphologies and, more fundamentally, the material's high carrier concentration with low mobilities that limits the obtainable photoresponsivity. The synergetic integration of ultrananocrystalline diamond (UNCD) nanowires with nanoplasmonic enhancement by noble metal nanoparticles is a very promising approach to overcome these shortcomings. Here we report the fabrication of boron-doped ultrananocrystalline diamond nanowires functionalized with the platinum nanoparticles to form self-powered ultraviolet photodetectors that exhibit an ultrahigh photoresponsivity of 388 Amp/Watt at 300 nm wavelength, a fast response time around 20 ms, and a good UV/visible rejection ratio of about 5 orders of magnitude under zero-bias condition.

Effect of Metal Ions on Hybrid Graphite-Diamond Nanowire Growth: Conductivity Measurements from a Single Nanowire Device

Novel Cd²⁺ ions mediated reproducible hybrid graphite-diamond nanowire (G-DNWs; Cd²⁺-NDS1 NW) growth from 4-Amino-5-phenyl-4H-1,2,4-triazole-3-thiol (S1) functionalized diamond nanoparticles (NDS1) via supramolecular assembly is reported and demonstrated through TEM and AFM images. FTIR, EDX and XPS studies reveal the supramolecular coordination between functional units of NDS1 and Cd²⁺ ions towards NWs growth. Investigations of XPS, XRD and Raman data show the covering of graphite sheath over DNWs. Moreover, HR-TEM studies on Cd²⁺-NDS1 NW confirm the coexistence of less perfect sp² graphite layer and sp³ diamond carbon along with impurity channels and flatten surface morphology. Possible mechanisms behind the G-DNWs growth are proposed and clarified. Subsequently, conductivity of the as-grown G-DNWs is determined through the fabrication of a single Cd²⁺-NDS1 NW device, in which the G-DNW portion L2 demonstrates a better conductivity of 2.31 × 10⁻⁴ mS/cm. In addition, we investigate the temperature-dependent carrier transport mechanisms and the corresponding activation energy in details. Finally, comparisons in electrical resistivities with other carbon-based materials are made to validate the importance of our conductivity measurements.

Conductive diamond: synthesis, properties, and electrochemical applications

This review summarizes systematically the growth, properties, and electrochemical applications of conductive diamond.

Light-Triggered Release of Biomolecules from Diamond Nanowire Electrodes

The controlled release of biomolecules from a substrate surface is a challenging task. Photocleavable linkers appear as attractive candidates for light-triggered delivery. We show here the possibility of creating photoactivable diamond nanowire interfaces, from which molecules can be photochemically released upon irradiation at 365 nm for several minutes. The approach is based on the covalent modification of boron-doped diamond nanowires (BDD NWs) with o-nitrobenzyl containing ligands, to which different biomolecules can be attached via amide bond formation. The photodecomposition reaction and the subsequent release of small proteins such as lysozyme or enzymes such as horseradish peroxidase (HRP) are investigated using electrochemical impedance spectroscopy. Using a colorimetric assay, we demonstrate that, while complete cleavage of HRP was achieved upon irradiation for 10 min at 1 W cm(-2), this exposure time resulted in a partial loss of enzymatic activity.