Simulations of Interdigitated Electrode Interactions with Gold Nanoparticles for Impedance-Based Biosensing Applications

The Role of Interdigitated Electrodes in Printed and Flexible Electronics

Flexible electronics, also referred to as printable electronics, represent an interesting technology for implementing electronic circuits via depositing electronic devices onto flexible substrates, boosting their possible applications. Among all flexible electronics, interdigitated electrodes (IDEs) are currently being used for different sensor applications since they offer significant benefits beyond their functionality as capacitors, like the generation of high output voltage, fewer fabrication steps, convenience of application of sensitive coatings, material imaging capability and a potential of spectroscopy measurements via electrical excitation frequency variation. This review examines the role of IDEs in printed and flexible electronics since they are progressively being incorporated into a myriad of applications, envisaging that the growth pattern will continue in the next generations of flexible circuits to come.

Study on Microfluidic Chip Flow Rate Uniformity for Cell Activity Detection

During the cell viability detection process inside a microfluidic chip, the more uniform the distribution of medium flow rates, the higher the accuracy of detection results. In order to achieve this goal, a multichannel microfluidic chip with uniform distribution of medium flow rates has been successfully designed. The multichannel microfluidic chip is designed with cell injection channels, vascular network-shaped medium injection channels, buffer zones, and a culture chamber. The medium flow rates inside culture chambers of the multichannel microfluidic chip and the common single-channel microfluidic chip are compared by COMSOL Multiphysics software and particle velocimetry experiment. The simulation and experimental results show that the medium flow rate distribution inside the culture chamber of the multichannel microfluidic chip is more uniform and changes more smoothly. When the medium perfusion flow rate is 0.5 μL/min, the maximum flow rate difference inside the culture chamber of the single-channel microfluidic chip is more than 13 times that of the multichannel microfluidic chip. Therefore, the multichannel microfluidic chip can ensure a uniform supply of medium inside the culture chamber, which is beneficial to improve the accuracy of cell viability detection.

Gelatin-Based Ingestible Impedance Sensor to Evaluate Gastrointestinal Epithelial Barriers

Low-profile and transient ingestible electronic capsules for diagnostics and therapeutics can replace widely used yet invasive procedures such as endoscopies. Several gastrointestinal diseases such as reflux disease, Crohn's disease, irritable bowel syndrome, and eosinophilic esophagitis result in increased intercellular dilation in epithelial barriers. Currently, the primary method of diagnosing and monitoring epithelial barrier integrity is via endoscopic tissue biopsies followed by histological imaging. Here, a gelatin-based ingestible electronic capsule that can monitor epithelial barriers via electrochemical impedance measurements is proposed. Toward this end, material-specific transfer printing methodologies to manufacture soft-gelatin-based electronics, an in vitro synthetic disease model to validate impedance-based sensing, and tests of capsules using ex vivo using porcine esophageal tissue are described. The technologies described herein can advance next generation of oral diagnostic devices that reduce invasiveness and improve convenience for patients.

Regenerative Strategy of Gold Electrodes for Long-Term Reuse of Electrochemical Biosensors

Gold is of considerable interest for electrochemical active surfaces because thiol-modified chemicals and biomolecules can be easily immobilized with a simple procedure. However, most gold surfaces are damaged with repetitive measurements, so they are difficult to reuse. Here we demonstrate a novel electrochemical cleaning method of gold surfaces to reuse electrodes with a simple protocol that is easy and nontoxic. This electrochemical cleaning consists of two steps by using different solutions. The 1st step is a cyclic voltammetry sweep using a very low concentration of sulfuric acid, and the 2nd step is a cyclic voltammetry sweep using potassium ferricyanide. Different cleaning methods were also considered for comparison. Consequently, after assembling and desorption of the cell and antigen, the changes in gold electrode performance, as immunosensor and cytosensor, were investigated by electrochemical impedance and cyclic voltammetry. It was found that repetitive measurement is possible until five times while maintaining the reproducibility. It is believed that this method is capable of enabling reuse of gold electrodes and can be used for long-term and accurate monitoring of biological effects, especially at a low cost.

Label-free impedimetric immunosensor for point-of-care detection of COVID-19 antibodies

The COVID-19 pandemic has posed enormous challenges for existing diagnostic tools to detect and monitor pathogens. Therefore, there is a need to develop point-of-care (POC) devices to perform fast, accurate, and accessible diagnostic methods to detect infections and monitor immune responses. Devices most amenable to miniaturization and suitable for POC applications are biosensors based on electrochemical detection. We have developed an impedimetric immunosensor based on an interdigitated microelectrode array (IMA) to detect and monitor SARS-CoV-2 antibodies in human serum. Conjugation chemistry was applied to functionalize and covalently immobilize the spike protein (S-protein) of SARS-CoV-2 on the surface of the IMA to serve as the recognition layer and specifically bind anti-spike antibodies. Antibodies bound to the S-proteins in the recognition layer result in an increase in capacitance and a consequent change in the impedance of the system. The impedimetric immunosensor is label-free and uses non-Faradaic impedance with low nonperturbing AC voltage for detection. The sensitivity of a capacitive immunosensor can be enhanced by simply tuning the ionic strength of the sample solution. The device exhibits an LOD of 0.4 BAU/ml, as determined from the standard curve using WHO IS for anti-SARS-CoV-2 immunoglobulins; this LOD is similar to the corresponding LODs reported for all validated and established commercial assays, which range from 0.41 to 4.81 BAU/ml. The proof-of-concept biosensor has been demonstrated to detect anti-spike antibodies in sera from patients infected with COVID-19 within 1 h. Photolithographically microfabricated interdigitated microelectrode array sensor chips & label-free impedimetric detection of COVID-19 antibody.

A gold nanoparticle-protein G electrochemical affinity biosensor for the detection of SARS-CoV-2 antibodies: a surface modification approach

As COVID-19 waves continue to spread worldwide, demand for a portable, inexpensive and convenient biosensor to determine community immune/infection status is increasing. Here we describe an impedance-based affinity biosensor using Interdigitated Electrode (IDE) arrays to detect antibodies to SARS-CoV-2 in serum. We created the biosensor by functionalizing the IDEs' surface with abaculaovirus-expressed and purified Spike (S) protein to bind anti-SARS CoV-2antibodies. Gold nanoparticles (GNP) fused to protein G were used to probe for bound antibodies. An ELISA assay using horseradish peroxidase-protein G to probe for bound IgG confirmed that the purified S protein bound a commercial source of anti-SARS-CoV-2 antibodies specifically and bound anti-SARS-CoV-2 antibodies in COVID-19 positive serum. Then we demonstrated that our biosensor could detect anti-SARS-CoV-2 antibodies with 72% sensitivity in 2 h. Using GNP-protein G, the affinity biosensor had increased impedance changes with COVID-19positive serum and minimal or decreased impedance changes with negative serum. This demonstrated that our biosensor could discriminate between COVID-19 positive and negative sera, which were further improved using poly(vinyl alcohol)as a blocking agent.

New Microfluidic System for Electrochemical Impedance Spectroscopy Assessment of Cell Culture Performance: Design and Development of New Electrode Material

Electrochemical impedance spectroscopy (EIS) is widely accepted as an effective and non-destructive method to assess cell health during cell-culture. However, there is a lack of compact devices compatible with microfluidic integration and microscopy that could provide the real-time and non-invasive monitoring of cell-cultures using EIS. In this paper, we reported the design and characterization of a modular EIS testing system based on a patented technology. This device was fabricated using easily processable methodologies including screen-printing of the impedance electrodes and molding or micromachining of the cell culture chamber with an easy assembly procedure. Accordingly, to obtain processable, biocompatible and sterilizable electrode materials that lower the impact of interfacial impedance on TEER (Transepithelial electrical resistance) measurements, and to enable concomitant microscopy observations, we optimized the formulation of the electrode inks and the design of the EIS electrodes, respectively. First, electrode materials were based on carbon biocompatible inks enriched with IrOx particles to obtain low interfacial impedance electrodes approaching the performances of classical non-biocompatible Ag/AgCl second-species electrodes. Secondly, we proposed three original electrode designs, which were compared to classical disk electrodes that were optically compatible with microscopy. We assessed the impact of the electrode design on the response of the impedance sensor using COMSOL Multiphysics. Finally, the performance of the impedance spectroscopy devices was assessed in vitro using human airway epithelial cell cultures.

Removal of Thiol-SAM on a Gold Surface for Re-Use of an Interdigitated Chain-Shaped Electrode

The self-assembled monolayer (SAM) is the most common organic assembly utilized for the formation of the monolayers of alkane-thiolates on gold electrode, resulting in a wide range of applications for the modified SAM on gold in various research areas. This study examined the desorption of a SAM that was developed on the gold surface of an interdigitated chain-shaped electrode (the ICE, a unique electrode design, was fabricated by our group) with the goal of determining the most efficient strategy of SAM removal for the ICE to be re-used. A simple and proficient solution-based cleaning procedure was applied for the removal of a SAM on the gold surface of the ICE by using a sodium borohydride solution within short-term treatment, resulting in efficiency for the recovery of the originally electrochemical characteristic of ICE of 90.3%. The re-use of ICE after the removal process was confirmed by the successful re-deposition of a SAM onto the electrode surface, resulting in the high efficiency percentage of 90.1% for the reusability of ICE with the SAM modification. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used as tools to investigate the changes in the electrode interface at each stage of the SAM removal and the electrode recycling. X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy were employed, being powerful spectrum techniques, for the characterization of the bonding structure and chemical state of the bare ICE and the modified ICE at each treatment step. Based on the comprehensive discussion of analytical chemistry from the obtained EIS and CV data in this study, we confirmed and proved the effectiveness of this promising method for the removal of a SAM from the ICE and the re-use of ICE in the field of material deposition, with the aims of saving money, improving experimental handling, and protecting the environment.

Effect of Applied Electrical Stimuli to Interdigitated Electrode Sensors While Detecting 17α-Ethinylestradiol in Water Samples

The effect of impedance measurements of applied voltage on the detection of 17α-ethinylestradiol (EE2) in water samples using interdigitated electrodes (IDE) coated or not with thin films, is described. Firstly, the effect of immersion in EE2 aqueous solutions of layer-by-layer films prepared with poly(allylamine hydrochloride) (PAH), graphene oxide (GO), poly(1-(4-(3-carboxy-4-hydroxyphenylazo) benzene sulfonamido) 1,2 ethanediyl, sodium salt) (PAZO), polyethylenimine (PEI) and poly(sodium 4-styrenesulfonate) (PSS) was analyzed. These results demonstrated that PAH/GO films desorb during the immersion on EE2 solutions, while EE2 adsorbs on PAH/PAZO and PEI/PSS films with characteristic time values of 16.7 and 7.1 min, respectively, demonstrating that both films are adequate for the development of EE2 sensors. However, as the adsorption characteristic time is shorter, and the EE2 adsorbed amount is smaller, the PEI/PSS films are more suitable for the development of sensors. The effect of the applied voltage was analyzed using both IDEs covered with PEI/PSS films as well as those uncoated. The capacitance spectra are best fitted to analyze this effect, and the loss tangent spectra are advantageous to analyze the aqueous media. Furthermore, it was concluded that lower voltage values are best suited to perform measurements of this nature, given that higher voltages lead to less reliable results and cause irreparable damage to the sensors.

A microfluidic biosensor for rapid simultaneous detection of waterborne pathogens

A microfluidic based biosensor was investigated for rapid and simultaneous detection of Salmonella, Legionella, and Escherichia coli O157:H7 in tap water and wastewater. The biosensor consisted of two sets of focusing electrodes connected in parallel and three sets of interdigitated electrodes (IDE) arrays. The electrodes enabled the biosensor to concentrate and detect bacteria at both low and high concentrations. The focusing region was designed with vertical metal sidewall pairs and multiple tilted thin-film finger pairs to generate positive dielectrophoresis (p-DEP) to force the bacteria moving toward the microchannel centerline. As a result, the bacterial pathogens were highly concentrated when they reached the detection electrode arrays. The detection IDE arrays were coated with three different antibodies against the target bacterial pathogens and a cross-linker to enhance the binding of antibodies to the detection electrode. As the binding of bacterial pathogen to its specific antibodies took place, the impedance value changed. The results demonstrated that the biosensors were capable of detecting Salmonella, Legionella, and E. coli 0157:H7 simultaneously with a detection limit of 3 bacterial cells/ml in 30 - 40 min.

Detection of SalmonellaTyphimurium in water and meat using nanosensor

The sensor dimensions are chosen (10 * 10 mm) and manufactured by the laser engraving system as a dimension of the fine copper die and installed on the glass substrate coated with the nano material and the mould is coated with silver by thermal vacuum evaporation and the fixation of the connecting electrodes. The surface properties and the structural, optical and electrical properties of the thin films were studied. Samples prepared with an X-ray diffraction device (XRD) were examined to ensure the presence of elements or compounds entering the coating layer, and an examination with an atomic force microscope (AFM) to identify the crystal size of the coating compound and a scanning electron microscope. Field (SEM) is to prove the existence and proportions of active ingredients. The UV nano composite spectra were studied to investigate the optical behavior of ZnO-rGO membranes (transmittance and absorption). The sensing properties were determined by measuring changes in the conductivity of the prepared bacteria present in water and flesh using current and voltage measurement I-V by two mass device methods and the results were accurate. The results proved that ZnO-rGO has high sensitivity towards bacteria and is made of thin films of nano composites and has a high performance to detect bacteria in water and meat. The goal of this study is to design and manufacture a nano sensor with high efficiency to detect a type of bacteria that the thin films deposited in the vacuum have properties excellent for accurate detection. The microbial detection devices based on thin materials are inexpensive and do not require trainers to use them, and they operate at room temperature. Thus they have the advantage of remote positioning and monitoring in dangerous places.

Insights in the Ionic Conduction inside Nanoporous Metal-Organic Frameworks by Using an Appropriate Equivalent Circuit

The conduction of protons and other ions in nanoporous materials, such as metal-organic frameworks (MOFs), is intensively explored with the aim of enhancing the performance of energy-related electrochemical systems. The ionic conductivity, as a key property of the material, is typically determined by using electrochemical impedance spectroscopy (EIS) in connection with a suitable equivalent circuit. Often, equivalent circuits are used where the physical meaning of each component is debatable. Here, we present an equivalent circuit for the ionic conduction of electrolytes in nanoporous, nonconducting materials between inert and impermeable electrodes without faradaic electrode reactions. We show the equivalent circuit perfectly describes the impedance spectra measured for the ion conduction in MOFs in the form of powders pressed into pellets as well as for MOF thin films. This is demonstrated for the ionic conduction of an aprotic ionic liquid, and of various protic solvents in different MOF structures. Due to the clear physical meaning of each element of the equivalent circuit, further insights into the electrical double layer forming at the MOF-electrode interface can be obtained. As a result, EIS combined with the appropriate reference circuit allows us to make statements of the quality of the MOF-substrate interface of different MOF-film samples.

A microfluidic microparticle-labeled impedance sensor array for enhancing immunoassay sensitivity

An impedimetric biosensor is used to measure electrical impedance changes in the presence of biomolecules from sinusoidal input voltages. In this paper, we present a new portable impedance-based biosensor platform to improve the sensitivity of immunoassays with microparticles as a label. Using a 2 × 4 interdigitated electrode array with a 10/10 μm electrode/gap and a miniaturized impedance analyzer, we performed immunoassays with microparticles by integrating a microfluidic channel to evaluate signal enhancement. First, to understand the material dependency of microparticles on the sensor array, magnetic, silica, and polystyrene microparticles were tested. Among these microparticles, magnetic microparticles presented a high signal enhancement with relevant stability from the sensor array. With the magnetic microparticles, we demonstrate a series of immunoassays to detect human tumor necrosis factor (TNF-α) and compare the level of signal enhancement by measuring the limit of detection (LOD). With the microparticles, we achieved over ten times improvement of LOD from sandwich immunoassays. By incorporating with sample preparation and flow manipulation systems, this impedance sensor array can be utilized for digital diagnostics for a real sample-in answer-out system.

Design, Simulation, and Development of a BioSensor for Viruses Detection Using FPGA

Objective: Impedance based biosensing provides a unique, highly sensitive electrical approach to biomolecule detection, cell growth, and other biological events. To date, an impedance change due to the cell growth has been considered as a solution to detect some changes in a cell’s behavior. The impedance change detection is normally measured via an impedance analyzer which is expensive and also cumbersome. Rapid and definitive diagnosis of viral infections is imperative in patient treatment process. Early detection followed by appropriate lifestyle and treatment may result to a longer, healthier life. Certain patients require continues monitoring that may require regular visits to hospitals which is not practical. Therefore, a continuous home healthcare device is needed to monitor and detect any change in a patient’s health condition. Methods & Results: In this research, a novel sensor and healthcare monitoring system is modeled, simulated, developed, and tested to detect viruses by detecting the change in the impedance due to antibodies and antigens binding. First, COMSOL simulation tool is used to develop a model to prove the concept. The model predicts increasing impedance during functionalization of electrodes with antibodies and after antigen binding steps. Second, to understand how nanoscale electrode size and spacing would affect biosensing assay (antibody-based affinity binding of a protein antigen), a model using COMSOL is developed. Third, Field Programmable Gate Arrays (FPGA) based signal processing system is developed as well to be connected to analog to digital converter (ADC) to acquire the current and voltage readings of the sensors over time. This healthcare monitoring system is used to continuously monitoring a patient’s condition and reports any changes in the impedance readings which represents virus detection or at least change in the cell’s behavior. Conclusions: The proposed sensor model is simulated, tested and verified via COMSOL and the FPGA prototype is tested and it verified the COMSOL model. This work reports that the proposed sensor can be used to detect viruses via detecting a change in the impedance.

Impedance Spectroscopy as a Tool for Monitoring Performance in 3D Models of Epithelial Tissues

In contrast to traditional 2D cell cultures, both 3D models and organ-on-a-chip devices allow the study of the physiological responses of human cells. These models reconstruct human tissues in conditions closely resembling the body. Translation of these techniques into practice is hindered by associated labor costs, a need which may be remedied by automation. Impedance spectroscopy (IS) is a promising, automation-compatible label-free technology allowing to carry out a wide range of measurements both in real-time and as endpoints. IS has been applied to both the barrier cultures and the 3D constructs. Here we provide an overview of the impedance-based analysis in different setups and discuss its utility for organ-on-a-chip devices. Most attractive features of impedance-based assays are their compatibility with high-throughput format and supports for the measurements in real time with high temporal resolution, which allow tracing of the kinetics. As of now, IS-based techniques are not free of limitations, including imperfect understanding of the parameters that have their effects on the impedance, especially in 3D cell models, and relatively high cost of the consumables. Moreover, as the theory of IS stems from electromagnetic theory and is quite complex, work on popularization and explanation of the method for experimental biologists is required. It is expected that overcoming these limitations will lead to eventual establishing IS based systems as a standard for automated management of cell-based experiments in both academic and industry environments.

Finite Element Simulation of the Impedance Response of a Vascular Segment as a Function of Changes in Electrode Configuration

Monitoring a biological tissue as a three dimensional (3D) model is of high importance. Both the measurement technique and the measuring electrode play substantial roles in providing accurate 3D measurements. Bioimpedance spectroscopy has proven to be a noninvasive method providing the possibility of monitoring a 3D construct in a real time manner. On the other hand, advances in electrode fabrication has made it possible to use flexible electrodes with different configurations, which makes 3D measurements possible. However, designing an experimental measurement set-up for monitoring a 3D construct can be costly and time consuming and would require many tissue models. Finite element modeling methods provide a simple alternative for studying the performance of the electrode and the measurement set-up before starting with the experimental measurements. Therefore, in this study we employed the COMSOL Multiphysics finite element modeling method for simulating the effects of changing the electrode configuration on the impedance spectroscopy measurements of a venous segment. For this purpose, the simulations were performed for models with different electrode configurations. The simulation results provided us with the possibility of finding the optimal electrode configuration including the geometry, number and dimensions of the electrodes, which can be later employed in the experimental measurement set-up.

An aptasensor for the detection of Mycobacterium tuberculosis secreted immunogenic protein MPT64 in clinical samples towards tuberculosis detection

This work presents experimental results on detection of Mycobacterium tuberculosis secreted protein MPT64 using an interdigitated electrode (IDE) which acts as a platform for capturing an immunogenic protein and an electrochemical impedance spectroscopy (EIS) as a detection technique. The assay involves a special receptor, single stranded DNA (ssDNA) aptamer, which specifically recognizes MPT64 protein. The ssDNA immobilization on IDE was based on a co-adsorbent immobilization at an optimized ratio of a 1/100 HS-(CH₆)₆-OP(O)₂O-(CH₂CH₂O)₆-5′-TTTTT-aptamer-3′/6-mercaptohexanol. The optimal sample incubation time required for a signal generation on an aptamer modified IDE was found to be at a range of 15–20 min. Atomic Force Microscopy (AFM) results confirmed a possible formation of an aptamer - MPT64 complex with a 20 nm roughness on the IDE surface vs. 4.5 nm roughness for the IDE modified with the aptamer only. A limit of detection for the EIS aptasensor based on an IDE for the detection of MPT64 in measurement buffer was 4.1 fM. The developed EIS aptasensor was evaluated on both serum and sputum clinical samples from the same TB (−) and TB (+) patients having a specificity and sensitivity for the sputum sample analysis 100% and 76.47%, respectively, and for the serum sample analysis 100% and 88.24%, respectively. The developed aptasensor presents a sensitive method for the TB diagnosis with the fast detection time.

Non-invasive Point-of-Care Device To Diagnose Acute Mesenteric Ischemia

Inadequate blood supply to the intestine can lead to acute mesenteric ischemia (AMI), with a mortality rate ranging from 60% to 90%. This high mortality rate is partially due to late detection and the lack of efficient early diagnostic tests. There is an urgent need for a point-of-care tool for immediate bedside diagnosis. Here we present for the first time a rapid and non-invasive electrochemical biosensor device based on non-faradic impedance spectroscopy to detect intestinal fatty-acid binding protein (I-FABP) as an indication of AMI. The electrochemical biosensors consist of gold interdigitated electrodes that were fabricated using photolithographic techniques on top of silicon dioxide substrates. The electrode surfaces were functionalized with an I-FABP capture antibody (CAnB) to entice the target protein, while gold nanoparticles (GNPs) functionalized with detection antibodies (DAnB-GNPs) were utilized as a novel mechanism to enhance the detection signal. Quantification of the I-FABP concentration in the medium depended on its attachment to CAnB and DAnB-GNPs in a sandwich manner, where the latter boosts the impedance signal through its binding to the I-FABP. This non-invasive non-faradic electric biosensor device demonstrates the potential for bench-to-bedside translation with the goal of decreasing morbidity and mortality from AMI.

Interdigitated microelectronic bandage augments hemostasis and clot formation at low applied voltage in vitro and in vivo

Hemorrhage or uncontrolled bleeding can arise either due to a medical condition or from a traumatic injury and are typically controlled with the application of a hemostatic agent. Hemostatic agents are currently derived from animal or human products, which carry risks of blood borne infections and immune dysregulation. Therefore, the need exists for novel biomedical therapies not derived from animal or human products to achieve hemostasis. Accordingly, we created an interdigitated microelectronic bandage that applies low voltage electrical stimulation to an injury site, resulting in faster clot formation without excessive heating, accelerated fibrin formation, and hemostasis overall. Our interdigitated microelectronic bandage found fibrin formed 1.5× faster in vitro. In vivo, total cessation of bleeding was 2.5× faster, resulting in 2× less blood loss. Electricity has been used in medical applications such as defibrillation, cauterization, and electrosurgery, but scant research has focused on hemostasis. Here we report a novel surface treatment using an interdigitated microelectronic device that creates rapid hemostasis in both in vitro and in vivo bleeding models with low applied voltages, representing a new and novel class of hemostatic agents that are electrically-based.

Immuno-impedimetric Biosensor for Onsite Monitoring of Ascospores and Forecasting of Sclerotinia Stem Rot of Canola

Sclerotinia stem rot, caused by the fungal pathogen Sclerotinia sclerotiorum, is a destructive disease of canola and many other broadleaf crops. The primary inoculum responsible for initiating Sclerotinia epidemics is airborne ascospores released from the apothecia of sclerotia. Timely detection of the presence of airborne ascospores can serve as an early-warning system for forecasting and management of the disease. A major challenge is to develop a portable and automated device which can be deployed onsite to detect and quantify the presence of minute quantities of ascospores in the air and serves as a unit in a network of systems for forecasting of the epidemic. In this communication, we present the development of an impedimetric non-Faradaic biosensor based on anti-S. sclerotiorum polyclonal antibodies as probes to selectively capture the ascospores and sense their binding by an impedance based interdigitated electrode which was found to directly and unambiguously correlate the number of ascospores on sensor surface with the impedance response.

A highly sensitive impedimetric aptasensor for the selective detection of acetamiprid and atrazine based on microwires formed by platinum nanoparticles

A novel impedimetric biosensor was developed for the detection of the two extensively used pesticides, acetamiprid and atrazine. By employing the sputtering and e-beam lithography techniques, platinum nanoparticles (Pt NPs) were deposited in a bridge-like arrangement, in between interdigitated electrodes (IDEs). The resulting Pt NP microwires were chemically functionalized to allow the covalent immobilization of aptamers against the two target analytes onto the sensor surfaces. The biosensing platform facilitated charge transfer through the microwire-bridged IDEs, while upon analyte binding to the immobilized aptamers electron transfer was hindered, resulting in an increase of the electrochemical cell's impedance. The combination of Pt NPs microwires and aptamers allowed the sensitive and highly selective detection of acetamiprid with a linear range of response in the range of 10pM to 100nM with a limit of detection (LoD) at 1pM, and of atrazine with a linear range of responses from 100pM to 1μM and a LoD at 10pM respectively. Its performance was tested against a number of other commonly used pesticides as well as in real water samples.

Using Impedance Measurements to Characterize Surface Modified with Gold Nanoparticles

With the increased practice of preventative healthcare to help reduce costs worldwide, sensor technology improvement is vital to patient care. Point-of-care (POC) diagnostics can reduce time and lower labor in testing, and can effectively avoid transporting costs because of portable designs. Label-free detection allows for greater versatility in the detection of biological molecules. Here, we describe the use of an impedance-based POC biosensor that can detect changes in the surface modification of a micro-fabricated chip using impedance spectroscopy. Gold nanoparticles (GNPs) have been employed to evaluate the sensing ability of our new chip using impedance measurements. Furthermore, we used impedance measurements to monitor surface functionalization progress on the sensor's interdigitated electrodes (IDEs). Electrodes made from aluminum and gold were employed and the results were analyzed to compare the impact of electrode material. GNPs coated with mercaptoundecanoic acid were also used as a model of biomolecules to greatly enhance chemical affinity to the silicon substrate. The portable sensor can be used as an alternative technology to ELISA (enzyme-linked immunosorbent assays) and polymerase chain reaction (PCR)-based techniques. This system has advantages over PCR and ELISA both in the amount of time required for testing and the ease of use of our sensor. With other techniques, larger, expensive equipment must be utilized in a lab environment, and procedures have to be carried out by trained professionals. The simplicity of our sensor system can lead to an automated and portable sensing system.

Reduced Graphene Oxide Modified the Interdigitated Chain Electrode for an Insulin Sensor

Insulin is a key regulator in glucose homeostasis and its deficiency or alternations in the human body causes various types of diabetic disorders. In this paper, we present the development of a reduced graphene oxide (rGO) modified interdigitated chain electrode (ICE) for direct capacitive detection of insulin. The impedance properties of rGO-ICE were characterized by equivalent circuit modeling. After an electrochemical deposition of rGO on ICE, the electrode was modified with self-assembled monolayers and insulin antibodies in order to achieve insulin binding reactions. The impedance spectra and capacitances were measured with respect to the concentrations of insulin and the capacitance change (ΔC) was analyzed to quantify insulin concentration. The antibody immobilized electrode showed an increment of ΔC according to the insulin concentration in human serum ranging from 1 ng/mL to 10 µg/mL. The proposed sensor is feasible for label-free and real-time measuring of the biomarker and for point-of-care diagnosis.