A Microfluidic DNA Sensor Based on Three-Dimensional (3D) Hierarchical MoS₂/Carbon Nanotube Nanocomposites

Microfluidics for core-shell drug carrier particles - a review

Core-shell drug-carrier particles are known for their unique features. Due to the combination of superior properties not exhibited by the individual components, core-shell particles have gained a lot of interest. The structures could integrate core and shell characteristics and properties. These particles were designed for controlled drug release in the desired location. Therefore, the side effects would be minimized. So, these particles' advantages have led to the introduction of new methods and ideas for their fabrication. In the past few years, the generation of drug carrier core-shell particles in microfluidic chips has attracted much attention. This method makes it possible to produce particles at nanometer and micrometer levels of the same shape and size; it usually costs less than other methods. The other advantages of using microfluidic techniques compared to conventional bulk methods are integration capability, reproducibility, and higher efficiency. These advantages have created a positive outlook on this approach. This review gives an overview of the various fluidic concepts that are used to generate microparticles or nanoparticles. Also, an overview of traditional and more recent microfluidic devices and their design and structure for the generation of core-shell particles is given. The unique benefits of the microfluidic technique for core-shell drug carrier particle generation are demonstrated.

Metal Nanoparticles-Enhanced Biosensors: Synthesis, Design and Applications in Fluorescence Enhancement and Surface-enhanced Raman Scattering

Metal nanoparticles (NP) that exhibit localized surface plasmon resonance play an important role in metal-enhanced fluorescence (MEF) and surface-enhanced Raman scattering (SERS). Among the optical biosensors, MEF and SERS stand out to be the most sensitive techniques to detect a wide range of analytes from ions, biomolecules to macromolecules and microorganisms. Particularly, anisotropic metal NPs with strongly enhanced electric field at their sharp corners/edges under a wide range of excitation wavelengths are highly suitable for developing the ultrasensitive plasmon-enhanced biosensors. In this review, we first highlight the reliable methods for the synthesis of anisotropic gold NPs and silver NPs in high yield, as well as their alloys and composites with good control of size and shape. It is followed by the discussion of different sensing mechanisms and recent advances in the MEF and SERS biosensor designs. This includes the review of surface functionalization, bioconjugation and (directed/self) assembly methods as well as the selection/screening of specific biorecognition elements such as aptamers or antibodies for the highly selective bio-detection. The right combinations of metal nanoparticles, biorecognition element and assay design will lead to the successful development of MEF and SERS biosensors targeting different analytes both in-vitro and in-vivo. Finally, the prospects and challenges of metal-enhanced biosensors for future nanomedicine in achieving ultrasensitive and fast medical diagnostics, high-throughput drug discovery as well as effective and reliable theranostic treatment are discussed.

One-pot synthesis of MoS2(1-x)Se2x on N-doped reduced graphene oxide: tailoring chemical and structural properties for photoenhanced hydrogen evolution reaction

In this work we designed a one-pot solvothermal synthesis of MoS_2(1-x)Se_2x nanosheets directly grown on N-doped reduced graphene oxide (hereafter N-rGO). We optimized the synthesis conditions to control the Se : S ratio, with the aim of tailoring the optoelectronic properties of the resulting nanocomposites for their use as electro- and photoelectro-catalysts in the hydrogen evolution reaction (HER). The synthesis protocol made use of ammonium tetrathiomolybdate (ATM) as MoS₂ precursor and dimethyl diselenide (DMDSe) as selenizing agent. By optimizing growth conditions and post-annealing treatments, we produced either partially amorphous or highly crystalline chalcogen-defective electrocatalysts. All samples were tested for the HER in acidic environment, and the best performing among them, for the photoassisted HER. In low crystallinity samples, the introduction of Se is not beneficial for promoting the catalytic activity, and MoS₂/N-rGO was the most active electrocatalyst. On the other hand, after the post-annealing treatment and the consequent crystallization of the materials, the best HER performance was obtained for the sample with x = 0.38, which also showed the highest enhancement upon light irradiation.

Real-time imaging of infarction deterioration after ischemic stroke in rats using electrical impedance tomography

OBJECTIVE

This study investigated the feasibility of electrical impedance tomography (EIT) for monitoring the deterioration of ischemic lesion after the onset of stroke.

APPROACH

Fifteen rats were randomly distributed into two groups: rats operated to establish a right middle cerebral artery occlusion (MCAO) (n  =  10), and sham-operated rats (n  =  5). Then, the operated rats were kept 2 h under anesthesia for EIT monitoring. Subsequently, descriptive statistical analysis was performed on whole-brain resistivity changes, and repeated-measures analysis of variance (ANOVA) on the average resistivity variation index. Additionally, pathological examinations were performed after 6 h of infarction.

MAIN RESULTS

The results obtained showed that ischemic damage developed in the right corpus striatum of the rats with MCAO, whereas the brains of the sham group showed no anomalies. The descriptive statistical analysis revealed that the whole-brain resistivity changes after 30, 60, 90, and 120 min of infarction were 0.063  ±  0.038, 0.097  ±  0.046, 0.141  ±  0.062, and 0.204  ±  0.092 for the rats with MCAO and 0.029  ±  0.021, 0.002  ±  0.002, 0.017  ±  0.011, and  -0.001  ±  0.011 for the sham-operated rats, respectively. The repeated-measures ANOVA revealed that the right MCAO model resulted in a significant impedance increase in the right hemisphere, which continued to increase over time after infarction.

SIGNIFICANCE

The overall study results indicate that EIT facilitates monitoring of local impedance variations caused by MCAO and may be a solution for real-time monitoring of intracranial pathological changes in ischemic stroke patients.

Effect of Ni Doping on the MoS2 Structure and Its Hydrogen Evolution Activity in Acid and Alkaline Electrolytes

We have investigated three-dimensional (3D) MoS2 nanoarchitectures doped with different amount of Ni to boost the hydrogen evolution reaction (HER) in alkaline environment, where this reaction is normally hindered. As a comparison, the activity in acidic media was also investigated to determine and compare the role of the Ni sites in both media. The doping of MoS2, especially at high loadings, can modify its structural and/or electronic properties, which can also affect the HER activity. The structural and electronic properties of the Ni doped 3D-MoS2 nanoarchitecture were studied by X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electronic microscopy (SEM; TEM), and X-ray photoemission Spectroscopy (XPS). XPS also allowed us to determine the Ni-based species formed as a function of the dopant loading. The HER activity of the materials was investigated by linear sweep voltammetry (LSV) in 0.5 M H2SO4 and 1.0 M KOH. By combining the physicochemical and electrochemical results, we concluded that the Ni sites have a different role in the HER mechanism and kinetics in acidic and in alkaline media. Thus, NiSx species are essential to promote HER in alkaline medium, whereas the Ni-Mo-S ones enhance the HER in acid medium.

A MoS2-MWCNT based fluorometric nanosensor for exosome detection and quantification

Circulating exosomes in body fluids are involved in many diseases and have important roles in pathophysiological processes. Specifically, they have emerged as a promising new class of biomarkers in cancer diagnosis and prognosis because of their high concentration and availability in a variety of biological fluids. The ability to quantitatively detect and characterize these nano-sized vesicles is crucial to make use of exosomes as a reliable biomarker for clinical applications. However, current methods are mostly technically challenging and time-consuming which prevents them from being adopted in clinical practice. In this work, we have developed a rapid sensitive platform for exosome detection and quantification by employing MoS₂-multiwall carbon nanotubes as a fluorescence quenching material. This exosome biosensor shows a sensitive and selective biomarker detection. Using this MoS₂-MWCNT based fluorometric nanosensor to analyze exosomes derived from MCF-7 breast cancer cells, we found that CD63 expression could be measured based on the retrieved fluorescence of the fluorophore with a good linear response range of 0-15% v/v. In addition, this nanosensing technique is able to quantify exosomes with different surface biomarker expressions and has revealed that exosomes secreted from MCF-7 breast cancer cells have a higher CD24 expression compared to CD63 and CD81.

Detection of chikungunya virus DNA using two-dimensional MoS2 nanosheets based disposable biosensor

Development of platforms for a reliable, rapid, sensitive and selective detection of chikungunya virus (CHIGV) is the need of the hour in developing countries. To the best of our knowledge, there are no reports available for the electrochemical detection of CHIGVDNA. Therefore, we aim at developing a biosensor based on molybdenum disulphide nanosheets (MoS₂ NSs) for the point-of-care diagnosis of CHIGV. Briefly, MoS₂ NSs were synthesized by chemical route and characterized using scanning electron microscopy, transmission electron microscopy, UV-Vis spectroscopy, Raman spectroscopy and X-Ray Diffraction. MoS₂ NSs were then subjected to physical adsorption onto the screen printed gold electrodes (SPGEs) and then employed for the detection of CHIGV DNA using electrochemical voltammetric techniques. Herein, the role of MoS₂ NSs is to provide biocompatibility to the biological recognition element on the surface of the screen printed electrodes. The detection strategy employed herein is the ability of methylene blue to interact differentially with the guanine bases of the single and double-stranded DNA which leads to change in the magnitude of the voltammetric signal. The proposed genosensor exhibited a wide linear range of 0.1 nM to 100 µM towards the chikungunya virus DNA.

MoS2-DNA and MoS2 based sensors

MoS₂, a family member of transition-metal dichalcogenides, has shown highly attractive superiority for detection arising from its unique physical and chemical properties.