Remote Sensing for Crop Water Management: From ET Modelling to Services for the End Users

Measuring the crop water demand and satisfied degree using remote sensing data and machine learning method in monsoon climatic region, India

Supply of water is one of the most significant determinants of regional crop production and human food security. To promote sustainable management of agricultural water, the crop water requirement assessment (CropWRA) model was introduced as a tool for the assessment of satisfied degree of crop water requirements (CWR). Crop combination, water availability for agricultural production, water accessibility, and other indices were calculated considering the DEM, hydrological and climatic data, and crop properties for measuring the agricultural water requirement and satisfied degree in Bansloi River basin using the CropWRA model. Advanced machine learning model random forest was used to calculate the soil moisture considering the atmospheric variable, Landsat indices, and energy balance components for calculating the crop water satisfied degree and water requirement. The average crop water demand is 1.92 m, and it ranges from 1.58 to 2.26 m. The demand of crop water is more in the western part of the basin than the eastern part. The CropWSD (crop water satisfied degree) ranges from 17 to 116% due to variation in topography, river system, crop combination, land use, water uses, etc. The average crop water satisfied degree is 59%. About 71% of the total area is under 40% to 60% CropWSD level. CropWRA model can be applied for the sustainable water resource management, irrigation infrastructure development, and use of other modern technologies.

Precision Estimation of Crop Coefficient for Maize Cultivation Using High-Resolution Satellite Imagery to Enhance Evapotranspiration Assessment in Agriculture

The estimation of crop evapotranspiration (ETc) is crucial for irrigation water management, especially in arid regions. This can be particularly relevant in the Po Valley (Italy), where arable lands suffer from drought damages on an annual basis, causing drastic crop yield losses. This study presents a novel approach for vegetation-based estimation of crop evapotranspiration (ETc) for maize. Three years of high-resolution multispectral satellite (Sentinel-2)-based Normalized Difference Vegetation Index (NDVI), Normalized Difference Water Index (NDWI), Normalized Difference Red Edge Index (NDRE), and Leaf Area Index (LAI) time series data were used to derive crop coefficients of maize in nine plots at the Acqua Campus experimental farm of Irrigation Consortium for the Emilia Romagna Canal (CER), Italy. Since certain vegetation indices (VIs) (such as NDVI) have an exponential nature compared to the other indices, both linear and power regression models were evaluated to estimate the crop coefficient (Kc). In the context of linear regression, the correlations between Food and Agriculture Organization (FAO)-based Kc and NDWI, NDRE, NDVI, and LAI-based Kc were 0.833, 0.870, 0.886, and 0.771, respectively. Strong correlation values in the case of power regression (NDWI: 0.876, NDRE: 0.872, NDVI: 0.888, LAI: 0.746) indicated an alternative approach to provide crop coefficients for the vegetation period. The VI-based ETc values were calculated using reference evapotranspiration (ET0) and VI-based Kc. The weather station data of CER were used to calculate ET0 based on Penman-Monteith estimation. Out of the Vis, NDWI and NDVI-based ETc performed the best both in the cases of linear (NDWI RMSE: 0.43 ± 0.12; NDVI RMSE: 0.43 ± 0.095) and power (NDWI RMSE: 0.44 ± 0.116; NDVI RMSE: 0.44 ± 0.103) approaches. The findings affirm the efficacy of the developed methodology in accurately assessing the evapotranspiration rate. Consequently, it offers a more refined temporal estimation of water requirements for maize cultivation in the region.

Estimating crop coefficients and actual evapotranspiration in citrus orchards with sporadic cover weeds based on ground and remote sensing data

Accurate estimations of actual crop evapotranspiration are of utmost importance to evaluate crop water requirements and to optimize water use efficiency. At this aim, coupling simple agro-hydrological models, such as the well-known FAO-56 model, with remote observations of the land surface could represent an easy-to-use tool to identify biophysical parameters of vegetation, such as the crop coefficient K_c under the actual field conditions and to estimate actual crop evapotranspiration. This paper intends, therefore, to propose an operational procedure to evaluate the spatio-temporal variability of K_c in a citrus orchard characterized by the sporadic presence of ground weeds, based on micro-meteorological measurements collected on-ground and vegetation indices (VIs) retrieved by the Sentinel-2 sensors. A non-linear K_c(VIs) relationship was identified after assuming that the sum of two VIs, such as the normalized difference vegetation index, NDVI, and the normalized difference water index, NDWI, is suitable to represent the spatio-temporal dynamics of the investigated environment, characterized by sparse vegetation and the sporadic presence of spontaneous but transpiring soil weeds, typical of winter seasons and/or periods following events wetting the soil surface. The K_c values obtained in each cell of the Sentinel-2 grid (10 m) were then used as input of the spatially distributed FAO-56 model to estimate the variability of actual evapotranspiration (ET_a) and the other terms of water balance. The performance of the proposed procedure was finally evaluated by comparing the estimated average soil water content and actual crop evapotranspiration with the corresponding ones measured on-ground. The application of the FAO-56 model indicated that the estimated ET_a were characterized by root-mean-square-error, RMSE, and mean bias-error, MBE, of 0.48 and -0.13 mm d^-1 respectively, while the estimated soil water contents, SWC, were characterized by RMSE equal to 0.01 cm³ cm^-3 and the absence of bias, then confirming that the suggested procedure can produce highly accurate results in terms of dynamics of soil water content and actual crop evapotranspiration under the investigated field conditions.

Assessing Spatio-Temporal Dynamics of Deep Percolation Using Crop Evapotranspiration Derived from Earth Observations through Google Earth Engine

Excess irrigation may result in deep percolation and nitrate transport to groundwater. Furthermore, under Mediterranean climate conditions, heavy winter rains often result in high deep percolation, requiring the separate identification of the two sources of deep percolated water. An integrated methodology was developed to estimate the spatio-temporal dynamics of deep percolation, with the actual crop evapotranspiration (ETc act) being derived from satellite images data and processed on the Google Earth Engine (GEE) platform. GEE allowed to extract time series of vegetation indices derived from Sentinel-2 enabling to define the actual crop coefficient (Kc act) curves based on the observed lengths of crop growth stages. The crop growth stage lengths were then used to feed the soil water balance model ISAREG, and the standard Kc values were derived from the literature; thus, allowing the estimation of irrigation water requirements and deep drainage for independent Homogeneous Units of Analysis (HUA) at the Irrigation Scheme. The HUA are defined according to crop, soil type, and irrigation system. The ISAREG model was previously validated for diverse crops at plot level showing a good accuracy using soil water measurements and farmers’ irrigation calendars. Results show that during the crop season, irrigation caused 11 ± 3% of the total deep percolation. When the hotspots associated with the irrigation events corresponded to soils with low suitability for irrigation, the cultivated crop had no influence. However, maize and spring vegetables stood out when the hotspots corresponded to soils with high suitability for irrigation. On average, during the off-season period, deep percolation averaged 54 ± 6% of the annual precipitation. The spatial aggregation into the Irrigation Scheme scale provided a method for earth-observation-based accounting of the irrigation water requirements, with interest for the water user’s association manager, and at the same time for the detection of water losses by deep percolation and of hotspots within the irrigation scheme.

A Review on Evapotranspiration Estimation in Agricultural Water Management: Past, Present, and Future

Evapotranspiration (ET) is a major component of the water cycle and agricultural water balance. Estimation of water consumption over agricultural areas is important for agricultural water resources planning, management, and regulation. It leads to the establishment of a sustainable water balance, mitigates the impacts of water scarcity, as well as prevents the overusing and wasting of precious water resources. As evapotranspiration is a major consumptive use of irrigation water and rainwater on agricultural lands, improvements of water use efficiency and sustainable water management in agriculture must be based on the accurate estimation of ET. Applications of precision and digital agricultural technologies, the integration of advanced techniques including remote sensing and satellite technology, and usage of machine learning algorithms will be an advantage to enhance the accuracy of the ET estimation in agricultural water management. This paper reviews and summarizes the technical development of the available methodologies and explores the advanced techniques in the estimation of ET in agricultural water management and highlights the potential improvements to enhance the accuracy of the ET estimation to achieve precise agricultural water management.

Remote Sensing, Geophysics, and Modeling to Support Precision Agriculture—Part 2: Irrigation Management

Food and water security are considered the most critical issues globally due to the projected population growth placing pressure on agricultural systems. Because agricultural activity is known to be the largest consumer of freshwater, the unsustainable irrigation water use required by crops to grow might lead to rapid freshwater depletion. Precision agriculture has emerged as a feasible concept to maintain farm productivity while facing future problems such as climate change, freshwater depletion, and environmental degradation. Agriculture is regarded as a complex system due to the variability of soil, crops, topography, and climate, and its interconnection with water availability and scarcity. Therefore, understanding these variables’ spatial and temporal behavior is essential in order to support precision agriculture by implementing optimum irrigation water use. Nowadays, numerous cost- and time-effective methods have been highlighted and implemented in order to optimize on-farm productivity without threatening the quantity and quality of the environmental resources. Remote sensing can provide lateral distribution information for areas of interest from the regional scale to the farm scale, while geophysics can investigate non-invasively the sub-surface soil (vertically and laterally), mapping large spatial and temporal domains. Likewise, agro-hydrological modelling can overcome the insufficient on-farm physicochemical dataset which is spatially and temporally required for precision agriculture in the context of irrigation water scheduling.

How High to Fly? Mapping Evapotranspiration from Remotely Piloted Aircrafts at Different Elevations

Recent advancements in remotely piloted aircrafts (RPAs) have made frequent, low-flying imagery collection more economical and feasible than ever before. The goal of this work was to create, compare, and quantify uncertainty associated with evapotranspiration (ET) maps generated from different conditions and image capture elevations. We collected optical and thermal data from a commercially irrigated potato (Solanum tuberosum) field in the Wisconsin Central Sands using a quadcopter RPA system and combined multispectral/thermal camera. We conducted eight mission sets (24 total missions) during the 2019 growing season. Each mission set included flights at 90, 60, and 30 m above ground level. Ground reference measurements of surface temperature and soil moisture were collected throughout the domain within 15 min of each RPA mission set. Evapotranspiration values were modeled from the flight data using the High-Resolution Mapping of Evapotranspiration (HRMET) model. We compared HRMET-derived ET estimates to an Eddy Covariance system within the flight domain. Additionally, we assessed uncertainty for each flight using a Monte Carlo approach. Results indicate that the primary source of uncertainty in ET estimates was the optical and thermal data. Despite some additional detectable features at low elevation, we conclude that the tradeoff in resources and computation does not currently justify low elevation flights for annual vegetable crop management in the Midwest USA.

Evaluation of Evaporation from Water Reservoirs in Local Conditions at Czech Republic

Evaporation is an important factor in the overall hydrological balance. It is usually derived as the difference between runoff, precipitation and the change in water storage in a catchment. The magnitude of actual evaporation is determined by the quantity of available water and heavily influenced by climatic and meteorological factors. Currently, there are statistical methods such as linear regression, random forest regression or machine learning methods to calculate evaporation. However, in order to derive these relationships, it is necessary to have observations of evaporation from evaporation stations. In the present study, the statistical methods of linear regression and random forest regression were used to calculate evaporation, with part of the models being designed manually and the other part using stepwise regression. Observed data from 24 evaporation stations and ERA5-Land climate reanalysis data were used to create the regression models. The proposed regression formulas were tested on 33 water reservoirs. The results show that manual regression is a more appropriate method for calculating evaporation than stepwise regression, with the caveat that it is more time consuming. The difference between linear and random forest regression is the variance of the data; random forest regression is better able to fit the observed data. On the other hand, the interpretation of the result for linear regression is simpler. The study introduced that the use of reanalyzed data, ERA5-Land products using the random forest regression method is suitable for the calculation of evaporation from water reservoirs in the conditions of the Czech Republic.

Determining Evapotranspiration by Using Combination Equation Models with Sentinel-2 Data and Comparison with Thermal-Based Energy Balance in a California Irrigated Vineyard

A new approach is proposed to derive evapotranspiration (E) and irrigation requirements by implementing the combination equation models of Penman–Monteith and Shuttleworth and Wallace with surface parameters and resistances derived from Sentinel-2 data. Surface parameters are derived from Sentinel-2 and used as an input in these models; namely: the hemispherical shortwave albedo, leaf area index and water status of the soil and canopy ensemble evaluated by using a shortwave infrared-based index. The proposed approach has been validated with data acquired during the GRAPEX (Grape Remote-sensing Atmospheric Profile and Evapotranspiration eXperiment) in California irrigated vineyards. The E products obtained with the combination equation models are evaluated by using eddy covariance flux tower measurements and are additionally compared with surface energy balance models with Landsat-7 and -8 thermal infrared data. The Shuttleworth and Wallace (S-W S-2) model provides an accuracy comparable to thermal-based methods when using local meteorological data, with daily E errors < 1 mm/day, which increased from 1 to 1.5 mm/day using meteorological forcing data from atmospheric models. The advantage of using the S-W S-2 modeling approach for monitoring ET is the high temporal revisit time of the Sentinel-2 satellites and the finer pixel resolution. These results suggest that, by integrating the thermal-based data fusion approach with the S-W S-2 modeling scheme, there is the potential to increase the frequency and reliability of satellite-based daily evapotranspiration products.

Evapotranspiration Estimation with the S-SEBI Method from Landsat 8 Data against Lysimeter Measurements at the Barrax Site, Spain

Evapotranspiration (ET) is a variable of the climatic system and hydrological cycle that plays an important role in biosphere–atmosphere–hydrosphere interactions. In this paper, remote sensing-based ET estimates with the simplified surface energy balance index (S-SEBI) model using Landsat 8 data were compared with in situ lysimeter measurements for different land covers (Grass, Wheat, Barley, and Vineyard) at the Barrax site, Spain, for the period 2014–2018. Daily estimates produced superior performance than hourly estimates in all the land covers, with an average difference of 12% and 15% for daily and hourly ET estimates, respectively. Grass and Vineyard showed the best performance, with an RMSE of 0.10 mm/h and 0.09 mm/h and 1.11 mm/day and 0.63 mm/day, respectively. Thus, the S-SEBI model is able to retrieve ET from Landsat 8 data with an average RMSE for daily ET of 0.86 mm/day. Some model uncertainties were also analyzed, and we concluded that the overpass of the Landsat missions represents neither the maximum daily ET nor the average daily ET, which contributes to an increase in errors in the estimated ET. However, the S-SEBI model can be used to operationally retrieve ET from agriculture sites with good accuracy and sufficient variation between pixels, thus being a suitable option to be adopted into operational ET remote sensing programs for irrigation scheduling or other purposes.

Monitoring Crop Evapotranspiration and Transpiration/Evaporation Partitioning in a Drip-Irrigated Young Almond Orchard Applying a Two-Source Surface Energy Balance Model

Encouraged by the necessity to better understand the water use in this woody crop, a study was carried out in a commercial drip-irrigated young almond orchard to quantify and monitor the crop evapotranspiration (ETc) and its partitioning into tree canopy transpiration (T) and soil evaporation (E), to list and analyze single and dual crop coefficients, and to extract relationships between them and the vegetation fractional cover (fc) and remote-sensing-derived vegetation indices (VIs). A Simplified Two-Source Energy Balance (STSEB) model was applied, and the results were compared to ground measurements from a flux tower. This study comprises three consecutive growing seasons from 2017 to 2019, corresponding to Years 2 to 4 after planting. Uncertainties lower than 50 W m−2 were obtained for all terms of the energy balance equation on an instantaneous scale, with average estimation errors of 0.06 mm h−1 and 0.6 mm d−1, for hourly and daily ETc, respectively. Water use for our young almond orchard resulted in average mid-season crop coefficient (Kc mid) values of 0.30, 0.33, and 0.45 for the 2017, 2018, and 2019 growing seasons, corresponding to fc mean values of 0.21, 0.35, and 0.39, respectively. Average daily evapotranspiration for the same periods resulted in 1.7, 2.1, and 3.2 mm d−1. The results entail the possibility of predicting the water use of any age almond orchards by monitoring its biophysical parameters.

Towards Monitoring Waterlogging with Remote Sensing for Sustainable Irrigated Agriculture

Waterlogging is an increasingly important issue in irrigated agriculture that has a detrimental impact on crop productivity. The above-ground effect of waterlogging on crops is hard to distinguish from water deficit stress with remote sensing, as responses such as stomatal closure and leaf wilting occur in both situations. Currently, waterlogging as a source of crop stress is not considered in remote sensing-based evaporation algorithms and this may therefore lead to erroneous interpretation for irrigation scheduling. Monitoring waterlogging can improve evaporation models to assist irrigation management. In addition, frequent spatial information on waterlogging will provide agriculturalists information on land trafficability, assist drainage design, and crop choice. This article provides a scientific perspective on the topic of waterlogging by consulting literature in the disciplines of agronomy, hydrology, and remote sensing. We find the solution to monitor waterlogging lies in a multi-sensor approach. Future scientific routes should focus on monitoring waterlogging by combining remote sensing and ancillary data. Here, drainage parameters deduced from high spatial resolution Digital Elevation Models (DEMs) can play a crucial role. The proposed approaches may provide a solution to monitor and prevent waterlogging in irrigated agriculture.

Efficient IoT-Based Control for a Smart Subsurface Irrigation System to Enhance Irrigation Management of Date Palm

Drought is the most severe problem for agricultural production, and the intensity of this problem is increasing in most cultivated areas around the world. Hence improving water productivity is the primary purpose of sustainable agriculture. This study aimed to use cloud IoT solutions to control a modern subsurface irrigation system for improving irrigation management of date palms in arid regions. To achieve this goal, we designed, constructed, and validated the performance of a fully automated controlled subsurface irrigation system (CSIS) to monitor and control the irrigation water amount remotely. The CSIS is based on an autonomous sensors network to instantly collect the climatic parameters and volumetric soil water content in the study area. Therefore, we employed the ThingSpeak cloud platform to host sensor readings, perform algorithmic analysis, instant visualize the live data, create event-based alerts to the user, and send instructions to the IoT devices. The validation of the CSIS proved that automatically irrigating date palm trees controlled by the sensor-based irrigation scheduling (S-BIS) is more efficient than the time-based irrigation scheduling (T-BIS). The S-BIS provided the date palm with the optimum irrigation water amount at the opportune time directly in the functional root zone. Generally, the S-BIS and T-BIS of CSIS reduced the applied irrigation water amount by 64.1% and 61.2%, respectively, compared with traditional surface irrigation (TSI). The total annual amount of applied irrigation water for CSIS with S-BIS method, CSIS with T-BIS method, and TSI was 21.04, 22.76, and 58.71 m³ palm⁻¹, respectively. The water productivity at the CSIS with S-BIS (1.783 kg m⁻³) and T-BIS (1.44 kg m⁻³) methods was significantly higher compared to the TSI (0.531 kg m⁻³). The CSIS with the S-BIS method kept the volumetric water content in the functional root zone next to the field capacity compared to the T-BIS method. The deigned CSIS with the S-BIS method characterized by the positive impact on the irrigation water management and enhancement on fruit yield of the date palm is quite proper for date palm irrigation in the arid regions.

Assessing Irrigation Water Use with Remote Sensing-Based Soil Water Balance at an Irrigation Scheme Level in a Semi-Arid Region of Morocco

This study aims to evaluate a remote sensing-based approach to allow estimation of the temporal and spatial distribution of crop evapotranspiration (ET) and irrigation water requirements over irrigated areas in semi-arid regions. The method is based on the daily step FAO-56 Soil Water Balance model combined with a time series of basal crop coefficients and the fractional vegetation cover derived from high-resolution satellite Normalized Difference Vegetation Index (NDVI) imagery. The model was first calibrated and validated at plot scale using ET measured by eddy-covariance systems over wheat fields and olive orchards representing the main crops grown in the study area of the Haouz plain (central Morocco). The results showed that the model provided good estimates of ET for wheat and olive trees with a root mean square error (RMSE) of about 0.56 and 0.54 mm/day respectively. The model was then used to compare remotely sensed estimates of irrigation requirements (RS-IWR) and irrigation water supplied (WS) at plot scale over an irrigation district in the Haouz plain through three growing seasons. The comparison indicated a large spatio-temporal variability in irrigation water demands and supplies; the median values of WS and RS-IWR were 130 (175), 117 (175) and 118 (112) mm respectively in the 2002–2003, 2005–2006 and 2008–2009 seasons. This could be attributed to inadequate irrigation supply and/or to farmers’ socio-economic considerations and management practices. The findings demonstrate the potential for irrigation managers to use remote sensing-based models to monitor irrigation water usage for efficient and sustainable use of water resources.

Exploring the Adoption of Precision Agriculture for Irrigation in the Context of Agriculture 4.0: The Key Role of Internet of Things

In recent years, the concept of Agriculture 4.0 has emerged as an evolution of precision agriculture (PA) through the diffusion of the Internet of things (IoT). There is a perception that the PA adoption is occurring at a slower pace than expected. Little research has been carried out about Agriculture 4.0, as well as to farmer behavior and operations management. This work explores what drives the adoption of PA in the Agriculture 4.0 context, focusing on farmer behavior and operations management. As a result of a multimethod approach, the factors explaining the PA adoption in the Agriculture 4.0 context and a model of irrigation operations management are proposed. Six simulation scenarios are performed to study the relationships among the factors involved in irrigation planning. Empirical findings contribute to a better understanding of what Agriculture 4.0 is and to expand the possibilities of IoT in the PA domain. This work also contributes to the discussion on Agriculture 4.0, thanks to multidisciplinary research bringing together the different perspectives of PA, IoT and operations management. Moreover, this research highlights the key role of IoT, considering the farmer’s possible choice to adopt several IoT sensing technologies for data collection.

Dynamic Crop Models and Remote Sensing Irrigation Decision Support Systems: A Review of Water Stress Concepts for Improved Estimation of Water Requirements

Novel technologies for estimating crop water needs include mainly remote sensing evapotranspiration estimates and decision support systems (DSS) for irrigation scheduling. This work provides several examples of these approaches, that have been adjusted and modified over the years to provide a better representation of the soil–plant–atmosphere continuum and overcome their limitations. Dynamic crop simulation models synthetize in a formal way the relevant knowledge on the causal relationships between agroecosystem components. Among these, plant–water–soil relationships, water stress and its effects on crop growth and development. Crop models can be categorized into (i) water-driven and (ii) radiation-driven, depending on the main variable governing crop growth. Water stress is calculated starting from (i) soil water content or (ii) transpiration deficit. The stress affects relevant features of plant growth and development in a similar way in most models: leaf expansion is the most sensitive process and is usually not considered when planning irrigation, even though prolonged water stress during canopy development can consistently reduce light interception by leaves; stomatal closure reduces transpiration, directly affecting dry matter accumulation and therefore being of paramount importance for irrigation scheduling; senescence rate can also be increased by severe water stress. The mechanistic concepts of crop models can be used to improve existing simpler methods currently integrated in irrigation management DSS, provide continuous simulations of crop and water dynamics over time and set predictions of future plant–water interactions. Crop models can also be used as a platform for integrating information from various sources (e.g., with data assimilation) into process-based simulations.

Evaluation of Remote Sensing-Based Irrigation Water Accounting at River Basin District Management Scale

The Water Framework Directive in Europe requires extending metering and water abstraction controls to accurately satisfy the necessary water resource requirements. However, in situ measurement instruments are inappropriate for large irrigation surface areas, considering the high investment and maintenance service costs. In this study, Remote Sensing-based Irrigation Water Accounting (RS-IWA) (previously evaluated for commercial plots, water user associations, and groundwater water management scales) was applied to over 11 Spanish river basin districts during the period of 2014–2018. Using the FAO56 methodology and incorporating remote sensing basal crop coefficient time series to simulate the Remote Sensing-based Soil Water Balance (RS-SWB), we were able to provide spatially and temporally distributed net irrigation requirements. The results were evaluated against the irrigation water demands estimated by the Hydrological Planning Offices and published in the River Basin Management Plans applying the same spatial (Agricultural Demand Units and Exploitation Systems) and temporal (annual and monthly) water management scales used by these public water managers, ultimately returning ranges of agreement (r2 and dr) (Willmott refined index) of 0.79 and 0.99, respectively. Thus, this paper presents an operational tool for providing updated spatio-temporal maps of RS-IWA over large and diverse irrigation surface areas, which is ready to serve as a complementary irrigation water monitoring and management tool.

Applications of Remote Sensing in Precision Agriculture: A Review

Agriculture provides for the most basic needs of humankind: food and fiber. The introduction of new farming techniques in the past century (e.g., during the Green Revolution) has helped agriculture keep pace with growing demands for food and other agricultural products. However, further increases in food demand, a growing population, and rising income levels are likely to put additional strain on natural resources. With growing recognition of the negative impacts of agriculture on the environment, new techniques and approaches should be able to meet future food demands while maintaining or reducing the environmental footprint of agriculture. Emerging technologies, such as geospatial technologies, Internet of Things (IoT), Big Data analysis, and artificial intelligence (AI), could be utilized to make informed management decisions aimed to increase crop production. Precision agriculture (PA) entails the application of a suite of such technologies to optimize agricultural inputs to increase agricultural production and reduce input losses. Use of remote sensing technologies for PA has increased rapidly during the past few decades. The unprecedented availability of high resolution (spatial, spectral and temporal) satellite images has promoted the use of remote sensing in many PA applications, including crop monitoring, irrigation management, nutrient application, disease and pest management, and yield prediction. In this paper, we provide an overview of remote sensing systems, techniques, and vegetation indices along with their recent (2015–2020) applications in PA. Remote-sensing-based PA technologies such as variable fertilizer rate application technology in Green Seeker and Crop Circle have already been incorporated in commercial agriculture. Use of unmanned aerial vehicles (UAVs) has increased tremendously during the last decade due to their cost-effectiveness and flexibility in obtaining the high-resolution (cm-scale) images needed for PA applications. At the same time, the availability of a large amount of satellite data has prompted researchers to explore advanced data storage and processing techniques such as cloud computing and machine learning. Given the complexity of image processing and the amount of technical knowledge and expertise needed, it is critical to explore and develop a simple yet reliable workflow for the real-time application of remote sensing in PA. Development of accurate yet easy to use, user-friendly systems is likely to result in broader adoption of remote sensing technologies in commercial and non-commercial PA applications.

Water Footprint Sustainability as a Tool to Address Climate Change in the Wine Sector: A Methodological Approach Applied to a Portuguese Case Study

In the Mediterranean region, climate change is likely to generate an increase in water demand and the deterioration of its quality. The adoption of precision viticulture and the best available techniques aiming at sustainable production, minimizing the impact on natural resources and reducing production costs, has therefore been a goal of winegrowers. In this work, the water footprint (WFP) in the wine sector was evaluated, from the vineyard to the bottle, through the implementation of a methodology based on field experiments and life cycle assessment (LCA) on two Portuguese case studies. Regarding direct water footprint, it ranged from 366 to 899 L/FU (0.75 L bottle), with green water being the most significant component, representing more than 50% of the overall water footprint. The approach used in the current study revealed that although more than 97.5% of the water footprint is associated with vineyard, the winery stage is responsible for more than 75% of the global warming potential indicator. A linear correlation between the carbon footprint and the indirect blue water footprint was also observed for both case studies. Climate change is expected to cause an earlier and prolonged water stress period, resulting in an increase of about 40% to 82% of blue WFP.

Comparison of ERA5-Land and UERRA MESCAN-SURFEX Reanalysis Data with Spatially Interpolated Weather Observations for the Regional Assessment of Reference Evapotranspiration

Reanalysis data are being increasingly used as gridded weather data sources for assessing crop-reference evapotranspiration (ET0) in irrigation water-budget analyses at regional scales. This study assesses the performances of ET0 estimates based on weather data, respectively produced by two high-resolution reanalysis datasets: UERRA MESCAN-SURFEX (UMS) and ERA5-Land (E5L). The study is conducted in Campania Region (Southern Italy), with reference to the irrigation seasons (April–September) of years 2008–2018. Temperature, wind speed, vapor pressure deficit, solar radiation and ET0 derived from reanalysis datasets, were compared with the corresponding estimates obtained by spatially interpolating data observed by a network of 18 automatic weather stations (AWSs). Statistical performances of the spatial interpolations were evaluated with a cross-validation procedure, by recursively applying universal kriging or ordinary kriging to the observed weather data. ERA5-Land outperformed UMS both in weather data and ET0 estimates. Averaging over all 18 AWSs sites in the region, the normalized BIAS (nBIAS) was found less than 5% for all the databases. The normalized RMSE (nRMSE) for ET0 computed with E5L data was 17%, while it was 22% with UMS data. Both performances were not far from those obtained by kriging interpolation, which presented an average nRMSE of 14%. Overall, this study confirms that reanalysis can successfully surrogate the unavailability of observed weather data for the regional assessment of ET0.

Monitoring Water-Related Ecosystems with Earth Observation Data in Support of Sustainable Development Goal (SDG) 6 Reporting

Lack of national data on water-related ecosystems is a major challenge to achieving the Sustainable Development Goal (SDG) 6 targets by 2030. Monitoring surface water extent, wetlands, and water quality from space can be an important asset for many countries in support of SDG 6 reporting. We demonstrate the potential for Earth observation (EO) data to support country reporting for SDG Indicator 6.6.1, ‘Change in the extent of water-related ecosystems over time’ and identify important considerations for countries using these data for SDG reporting. The spatial extent of water-related ecosystems, and the partial quality of water within these ecosystems is investigated for seven countries. Data from the Moderate Resolution Imaging Spectroradiometer (MODIS) and Landsat 5, 7, and 8 with Shuttle Radar Topography Mission (SRTM) are used to measure surface water extent at 250 m and 30 m spatial resolution, respectively, in Cambodia, Jamaica, Peru, the Philippines, Senegal, Uganda, and Zambia. The extent of mangroves is mapped at 30 m spatial resolution using Landsat 8 Operational Land Imager (OLI), Sentinel-1, and SRTM data for Jamaica, Peru, and Senegal. Using Landsat 8 and Sentinel 2A imagery, total suspended solids and chlorophyll-a are mapped over time for a select number of large surface water bodies in Peru, Senegal, and Zambia. All of the EO datasets used are of global coverage and publicly available at no cost. The temporal consistency and long time-series of many of the datasets enable replicability over time, making reporting of change from baseline values consistent and systematic. We find that statistical comparisons between different surface water data products can help provide some degree of confidence for countries during their validation process and highlight the need for accuracy assessments when using EO-based land change data for SDG reporting. We also raise concern that EO data in the context of SDG Indicator 6.6.1 reporting may be more challenging for some countries, such as small island nations, than others to use in assessing the extent of water-related ecosystems due to scale limitations and climate variability. Country-driven validation of the EO data products remains a priority to ensure successful data integration in support of SDG Indicator 6.6.1 reporting. Multi-country studies such as this one can be valuable tools for helping to guide the evolution of SDG monitoring methodologies and provide a useful resource for countries reporting on water-related ecosystems. The EO data analyses and statistical methods used in this study can be easily replicated for country-driven validation of EO data products in the future.

Potential for the Detection of Irrigation Events on Maize Plots Using Sentinel-1 Soil Moisture Products

Although the real timing and flow rates used for crop irrigation are controlled at the scale of individual plots by the irrigator, they are not generally known by the farm upper management. This information is nevertheless essential, not only to compute the water balance of irrigated plots and to schedule irrigation, but also for the management of water resources at regional scales. The aim of the present study was to detect irrigation timing using time series of surface soil moisture (SSM) derived from Sentinel-1 radar observations. The method consisted of assessing the direction of change of surface soil moisture (SSM) between observations and a water balance model, and to use thresholds to be calibrated. The performance of the approach was assessed on the F-score quantifying the accuracy of the irrigation event detections and ranging from 0 (none of the irrigation timing is correct) to 100 (perfect irrigation detection). The study focused on five irrigated and one rainfed plot of maize in South-West France, where the approach was tested using in situ measurements and surface soil moisture (SSM) maps derived from Sentinel-1 radar data. The use of in situ data showed that (1) irrigation timing was detected with a good accuracy (F-score in the range (80–83) for all plots) and (2) the optimal revisit time between two SSM observations was 2–4 days. The higher uncertainties of microwave SSM products, especially when the crop is well developed (normalized difference of vegetation index (NDVI) > 0.7), degraded the score (F-score = 69), but various possibilities of improvement were discussed. This paper opens perspectives for the irrigation detection at the plot scale over large areas and thus for the improvement of irrigation water management.

Systematic Mapping Study on Remote Sensing in Agriculture

The area of remote sensing techniques in agriculture has reached a significant degree of development and maturity, with numerous journals, conferences, and organizations specialized in it. Moreover, many review papers are available in the literature. The present work describes a literature review that adopts the form of a systematic mapping study, following a formal methodology. Eight mapping questions were defined, analyzing the main types of research, techniques, platforms, topics, and spectral information. A predefined search string was applied in the Scopus database, obtaining 1590 candidate papers. Afterwards, the most relevant 106 papers were selected, considering those with more than six citations per year. These are analyzed in more detail, answering the mapping questions for each paper. In this way, the current trends and new opportunities are discovered. As a result, increasing interest in the area has been observed since 2000; the most frequently addressed problems are those related to parameter estimation, growth vigor, and water usage, using classification techniques, that are mostly applied on RGB and hyperspectral images, captured from drones and satellites. A general recommendation that emerges from this study is to build on existing resources, such as agricultural image datasets, public satellite imagery, and deep learning toolkits.

Remote-Sensing-Based Water Balance for Monitoring of Evapotranspiration and Water Stress of a Mediterranean Oak–Grass Savanna

Mediterranean oak savannas (known as dehesas in Spain) are exposed to numerous threats from natural and economic causes. A close monitoring of the use of water resources and the status of the vegetation in these ecosystems can be useful tools for maintaining the production of ecological services. This study explores the estimation of evapotranspiration (ET) and water stress over a dehesa by integrating remotely sensed data into a water balance using the FAO-56 approach (VI-ETo model). Special attention is paid to the different phenology and contribution to the system’s hydrology of the two main canopy layers of the system (tree + grass). The results showed that the model accurately reproduced the dynamics of the water consumed by the vegetation, with RMSE of 0.47 mm day−1 and low biases for both, the whole system and the grass layer, when compared with flux tower measurements. The ET/ETo ratio helped to identify periods of water stress, confirmed for the grassland by measured soil water content. The modeling scheme and Sentinel-2 temporal resolution allowed the reproduction of fast and isolated ET pulses, important for understanding the hydrologic behavior of the system, confirming the adequacy of this sensor for monitoring grasslands water dynamics.

Predicting Crop Evapotranspiration by Integrating Ground and Remote Sensors with Air Temperature Forecasts

Water use efficiency in agriculture can be improved by implementing advisory systems that support on-farm irrigation scheduling, with reliable forecasts of the actual crop water requirements, where crop evapotranspiration (ET_c) is the main component. The development of such advisory systems is highly dependent upon the availability of timely updated crop canopy parameters and weather forecasts several days in advance, at low operational costs. This study presents a methodology for forecasting ET_c, based on crop parameters retrieved from multispectral images, data from ground weather sensors, and air temperature forecasts. Crop multispectral images are freely provided by recent satellite missions, with high spatial and temporal resolutions. Meteorological services broadcast air temperature forecasts with lead times of several days, at no subscription costs, and with high accuracy. The performance of the proposed methodology was applied at 18 sites of the Campania region in Italy, by exploiting the data of intensive field campaigns in the years 2014–2015. ET_c measurements were forecast with a median bias of 0.2 mm, and a median root mean square error (RMSE) of 0.75 mm at the first day of forecast. At the 5^th day of accumulated forecast, the median bias and RMSE become 1 mm and 2.75 mm, respectively. The forecast performances were proved to be as accurate and as precise as those provided with a complete set of forecasted weather variables.

Developing Irrigation Management at District Scale Based on Water Monitoring: Study on Lis Valley, Portugal

Irrigation districts play a decisive role in Portuguese agriculture and require the adaptation to the new water management paradigm through a change in technology and practices compatible with farmers’ technical know-how and economic sustainability. Therefore, improvement of water management, focusing on water savings and increasing farmers’ income, is a priority. In this perspective, an applied research study is being carried out on the gravity-fed Lis Valley Irrigation District to assess the performance of collective water supply, effectiveness of water pumping, and safety of crop production due to the practice of reuse of drainage water. The water balance method was applied at irrigation supply sectors, including gravity and Pumping Irrigation Allocation. The average 2018 irrigation water allocated was 7400 m3/ha, being 9.3% by pumping recharge, with a global efficiency of about 67%. The water quality analysis allowed identifying some risk situations regarding salinization and microbiological issues, justifying action to solve or mitigate the problems, especially at the level of the farmers’ fields, according to the crops and the irrigation systems. Results point to priority actions to consolidate improved water management: better maintenance and conservation of infrastructure of hydraulic infrastructures to reduce water losses and better flow control; implementation of optimal operational plans, to adjust the water demand with distribution; improvement of the on-farm systems with better water application control and maintenance procedures; and improvement of the control of water quality on the water reuse from drainage ditches. The technological innovation is an element of the modernization of irrigation districts that justifies the development of multiple efforts and synergies among stakeholders, namely farmers, water users association, and researchers.

Maize Crop Coefficient Estimated from UAV-Measured Multispectral Vegetation Indices

The rapid, accurate, and real-time estimation of crop coefficients at the farm scale is one of the key prerequisites in precision agricultural water management. This study aimed to map the maize crop coefficient (K_c) with improved accuracy under different levels of deficit irrigation. The proposed method for estimating the K_c is based on multispectral images of high spatial resolution taken using an unmanned aerial vehicle (UAV). The analysis was performed on five experimental plots using K_c values measured from the daily soil water balance in Ordos, Inner Mongolia, China. To accurately estimate the K_c, the fraction of vegetation cover (f_c) derived from the normalized difference vegetation index (NDVI) was used to compare with field measurements, and the stress coefficients (K_s) calculated from two vegetation index (VI) regression models were compared. The results showed that the NDVI values under different levels of deficit irrigation had no significant difference in the reproductive stage but changed significantly in the maturation stage, with a decrease of 0.09 with 72% water applied difference. The f_c calculated from the NDVI had a high correlation with field measurement data, with a coefficient of determination (R²) of 0.93. The ratios of transformed chlorophyll absorption in reflectance index (TCARI) to renormalized difference vegetation index (RDVI) and TCARI to soil-adjusted vegetation index (SAVI) were used, respectively, to establish two types of K_s regression models to retrieve K_c. Compared to the TCARI/SAVI model, the TCARI/RDVI model under different levels of deficit irrigation had better correlation with K_c, with R² and root-mean-square error (RMSE) values ranging from 0.68 to 0.80 and from 0.140 to 0.232, respectively. Compared to K_c calculated from on-site measurements, the K_c values retrieved from the VI regression models established in this study had greater ability to assess the field variability of soil and crops. Overall, use of the UAV-measured multispectral vegetation index approach could improve water management at the farm scale.

Precision Agriculture: A Remote Sensing Monitoring System Architecture †

Smart Farming is a development that emphasizes on the use of modern technologies in the cyber-physical field management cycle. Technologies such as the Internet of Things (IoT) and Cloud Computing have accelerated the digital transformation of the conventional agricultural practices promising increased production rate and product quality. The adoption of smart farming though is hampered because of the lack of models providing guidance to practitioners regarding the necessary components that constitute IoT-based monitoring systems. To guide the process of designing and implementing Smart farming monitoring systems, in this paper we propose a generic reference architecture model, taking also into consideration a very important non-functional requirement, the energy consumption restriction. Moreover, we present and discuss the technologies that incorporate the seven layers of the architecture model that are the Sensor Layer, the Link Layer, the Encapsulation Layer, the Middleware Layer, the Configuration Layer, the Management Layer and the Application Layer. Furthermore, the proposed Reference Architecture model is exemplified in a real-world application for surveying Saffron agriculture in Kozani, Greece.

Using Solar-Induced Chlorophyll Fluorescence Observed by OCO-2 to Predict Autumn Crop Production in China

The remote sensing of solar-induced chlorophyll fluorescence (SIF) has attracted considerable attention as a new monitor of vegetation photosynthesis. Previous studies have revealed the close correlation between SIF and terrestrial gross primary productivity (GPP), and have used SIF to estimate vegetation GPP. This study investigated the relationship between the Orbiting Carbon Observatory-2 (OCO-2) SIF products at two retrieval bands (SIF757, SIF771) and the autumn crop production in China during the summer of 2015 on different timescales. Subsequently, we evaluated the performance to estimate the autumn crop production of 2016 by using the optimal model developed in 2015. In addition, the OCO-2 SIF was compared with the moderate resolution imaging spectroradiometer (MODIS) vegetation indices (VIs) (normalized difference vegetation index, NDVI; enhanced vegetation index, EVI) for predicting the crop production. All the remotely sensed products exhibited the strongest correlation with autumn crop production in July. The OCO-2 SIF757 estimated autumn crop production best (R2 = 0.678, p < 0.01; RMSE = 748.901 ten kilotons; MAE = 567.629 ten kilotons). SIF monitored the crop dynamics better than VIs, although the performances of VIs were similar to SIF. The estimation accuracy was limited by the spatial resolution and discreteness of the OCO-2 SIF products. Our findings demonstrate that SIF is a feasible approach for the crop production estimation and is not inferior to VIs, and suggest that accurate autumn crop production forecasts while using the SIF-based model can be obtained one to two months before the harvest. Furthermore, the proposed method can be widely applied with the development of satellite-based SIF observation technology.

Hybrid Methodology for the Estimation of Crop Coefficients Based on Satellite Imagery and Ground-Based Measurements

The objective of the current study was the investigation of specific relationships between crop coefficients and vegetation indices (VI) computed at the water-limited environment of Lake Karla Watershed, Thessaly, in central Greece. A Mapping ET (evapotranspiration) at high Resolution and with Internalized Calibration (METRIC) model was used to derive crop coefficient values during the growing season of 2012. The proposed methodology was developed using medium resolution Landsat 7 ETM+ images and meteorological data from a local weather station. Cotton, sugar beets, and corn fields were utilized. During the same period, spectral signatures were obtained for each crop using the field spectroradiometer GER1500 (Spectra Vista Corporation, NY, U.S.A.). Relative spectral responses (RSR) were used for the filtering of the specific reflectance values giving the opportunity to match the spectral measurements with Landsat ETM+ bands. Normalized Difference Vegetation Index (NDVI), Soil Adjusted Vegetation Index (SAVI) and Enhanced Vegetation Index 2 (EVI2) were then computed, and empirical relationships were derived using linear regression analysis. NDVI, SAVI, and EVI2 were tested separately for each crop. The resulting equations explained those relationships with a very high R2 value (>0.86). These relationships have been validated against independent data. Validation using a new image file after the experimental period gives promising results, since the modeled image file is similar in appearance to the initial one, especially when a crop mask is applied. The CROPWAT model supports those results when using the new crop coefficients to estimate the related crop water requirements. The main benefit of the new approach is that the derived relationships are better adjusted to the crops. The described approach is also less time-consuming because there is no need for atmospheric correction when working with ground spectral measurements.

Decision Support System for Variable Rate Irrigation Based on UAV Multispectral Remote Sensing

Rational utilization of water resources is one of the major methods of water conservation. There are significant differences in the irrigation needs of different agricultural fields because of their spatial variability. Therefore, a decision support system for variable rate irrigation (DSS-VRI) by center pivot was developed. This system can process multi-spectral images taken by unmanned aerial vehicles (UAVs) and obtain the vegetation index (VI). The crop evapotranspiration model (ET_c) and crop water stress index (CWSI) were obtained from their established relationships with the VIs. The inputs to the fuzzy inference system were constituted with ET_c, CWSI and precipitation. To provide guidance for users, the duty-cycle control map was outputted using ambiguity resolution. The control command contained in the map adjusted the duty cycle of the solenoid valve, and then changed the irrigation amount. A water stress experiment was designed to verify the rationality of the DSS-VRI. The results showed that the more severe water stress is, the more irrigation is obtained, consistent with the expected results. Meanwhile, a user-friendly software interface was developed to implement the DSS-VRI function.

Mapping Maize Water Stress Based on UAV Multispectral Remote Sensing

Mapping maize water stress status and monitoring its spatial variability at a farm scale are a prerequisite for precision irrigation. High-resolution multispectral images acquired from an unmanned aerial vehicle (UAV) were used to evaluate the applicability of the data in mapping water stress status of maize under different levels of deficit irrigation at the late vegetative, reproductive and maturation growth stages. Canopy temperature, field air temperature and relative humidity obtained by a handheld infrared thermometer and a portable air temperature/relative humidity meter were used to establish a crop water stress index (CWSI) empirical model under the weather conditions in Ordos, Inner Mongolia, China. Nine vegetation indices (VIs) related to crop water stress were derived from the UAV multispectral imagery and used to establish CWSI inversion models. The results showed that non-water-stressed baseline had significant difference in the reproductive and maturation stages with an increase of 2.1 °C, however, the non-transpiring baseline did not change significantly with an increase of 0.1 °C. The ratio of transformed chlorophyll absorption in reflectance index (TCARI) and renormalized difference vegetation index (RDVI), and the TCARI and soil-adjusted vegetation index (SAVI) had the best correlations with CWSI. R2 values were 0.47 and 0.50 for TCARI/RDVI and TCARI/SAVI at the reproductive and maturation stages, respectively; and 0.81 and 0.80 for TCARI/RDVI and TCARI/SAVI at the late reproductive and maturation stages, respectively. Compared to CWSI calculated by on-site measurements, CWSI values retrieved by VI-CWSI regression models established in this study had more abilities to assess the field variability of crop and soil. This study demonstrates the potentiality of using high-resolution UAV multispectral imagery to map maize water stress.

Maize Canopy Temperature Extracted From UAV Thermal and RGB Imagery and Its Application in Water Stress Monitoring

To identify drought-tolerant crop cultivars or achieve a balance between water use and yield, accurate measurements of crop water stress are needed. In this study, the canopy temperature (Tc) of maize at the late vegetative stage was extracted from high-resolution red-green-blue (RGB, 1.25 cm) and thermal (7.8 cm) images taken by an unmanned aerial vehicle (UAV). To reduce the number of parameters for crop water stress monitoring, four simple methods that require only Tc were identified: Tc, degrees above non-stress, standard deviation of Tc, and variation coefficient of Tc. The ground-truth temperatures obtained using a handheld infrared thermometer were used to calibrate the temperature obtained from the UAV thermal images and to evaluate the Tc extraction results. Measured leaf stomatal conductance values were used to evaluate the performance of the four Tc-based crop water stress indicators. The results showed a strong correlation between ground-truth Tc and Tc extracted by the red-green ratio index (RGRI)-Otsu method proposed in this study, with a coefficient of determination of 0.94 (n = 15) and root mean square error value of 0.7°C. The RGRI-Otsu method was most accurate for estimating temperatures around 32.9°C, but the magnitude of residuals increased above and below this value. This phenomenon may be attributable to changes in canopy cover (leaf curling) under water stress, resulting in changes in the proportion of exposed sunlit soil in UAV thermal orthophotographs. Therefore, to improve the accuracy of maize canopy detection and extraction, optimal methods and better strategies for eliminating mixed pixels are needed. This study demonstrates the potential of using high-resolution UAV RGB images to supplement UAV thermal images for the accurate extraction of maize Tc.

Monitoring Crop Evapotranspiration and Crop Coefficients over an Almond and Pistachio Orchard Throughout Remote Sensing

In California, water is a perennial concern. As competition for water resources increases due to growth in population, California’s tree nut farmers are committed to improving the efficiency of water used for food production. There is an imminent need to have reliable methods that provide information about the temporal and spatial variability of crop water requirements, which allow farmers to make irrigation decisions at field scale. This study focuses on estimating the actual evapotranspiration and crop coefficients of an almond and pistachio orchard located in Central Valley (California) during an entire growing season by combining a simple crop evapotranspiration model with remote sensing data. A dataset of the vegetation index NDVI derived from Landsat-8 was used to facilitate the estimation of the basal crop coefficient (Kcb), or potential crop water use. The soil water evaporation coefficient (Ke) was measured from microlysimeters. The water stress coefficient (Ks) was derived from airborne remotely sensed canopy thermal-based methods, using seasonal regressions between the crop water stress index (CWSI) and stem water potential (Ψstem). These regressions were statistically-significant for both crops, indicating clear seasonal differences in pistachios, but not in almonds. In almonds, the estimated maximum Kcb values ranged between 1.05 to 0.90, while for pistachios, it ranged between 0.89 to 0.80. The model indicated a difference of 97 mm in transpiration over the season between both crops. Soil evaporation accounted for an average of 16% and 13% of the total actual evapotranspiration for almonds and pistachios, respectively. Verification of the model-based daily crop evapotranspiration estimates was done using eddy-covariance and surface renewal data collected in the same orchards, yielding an R2 ≥ 0.7 and average root mean square errors (RMSE) of 0.74 and 0.91 mm·day−1 for almond and pistachio, respectively. It is concluded that the combination of crop evapotranspiration models with remotely-sensed data is helpful for upscaling irrigation information from plant to field scale and thus may be used by farmers for making day-to-day irrigation management decisions.

Variation of River Islands around a Large City along the Yangtze River from Satellite Remote Sensing Images

River islands are sandbars formed by scouring and silting. Their evolution is affected by several factors, among which are runoff and sediment discharge. The spatial-temporal evolution of seven river islands in the Nanjing Section of the Yangtze River of China was examined using TM (Thematic Mapper) and ETM (Enhanced Thematic Mapper)+ images from 1985 to 2015 at five year intervals. The following approaches were applied in this study: the threshold value method, binarization model, image registration, image cropping, convolution and cluster analysis. Annual runoff and sediment discharge data as measured at the Datong hydrological station upstream of Nanjing section were also used to determine the roles and impacts of various factors. The results indicated that: (1) TM/ETM+ images met the criteria of information extraction of river islands; (2) generally, the total area of these islands in this section and their changing rate decreased over time; (3) sediment and river discharge were the most significant factors in island evolution. They directly affect river islands through silting or erosion. Additionally, anthropocentric influences could play increasingly important roles.